BTA12, BTB12, T1205 T1210, T1235, T1250 Datasheet 12 A Snubberless™, logic level and standard Triacs Features A2 • Medium current Triac • Low thermal resistance with clip bonding G • Low thermal resistance insulation ceramic for insulated BTA A1 • High commutation (4Q) or very high commutation (3Q) capability A2 • BTA series UL1557 certified (file ref: 81734) • Packages are RoHS (2011/65/EU) compliant G G A2 A2 A1 A1 Description TO-220AB TO-220AB Ins. A2 Available either in through-hole or surface mount packages, the BTA12, BTB12 and T12xx Triac series are suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating A2 G regulation or induction motor starting circuit. They are also recommended for phase A1 control operations in light dimmers and appliance motors speed controllers. D²PAK The Snubberless™ versions (W suffix and T12xx) are especially recommended for use on inductive loads, because of their high commutation performance. By using an internal ceramic pad, the Snubberless™ series provide an insulated tab (rated at 2500 V ) complying with UL standards (file reference: E81734). RMS Logic Level BTA12-600TW and BTA12-600SW offer low holding current, ideal to design light dimmers for LED lamps. Product status link BTA12 BTB12 T1205 T1210 T1235 T1250 Product summary IT(RMS) 12 A VDRM/VRRM 600 and 800 V IGT(Snubberless) 5 / 10 / 35 / 50 mA IGT(standard) 25 / 50 DS2115 - Rev 11 - August 2018 www.st.com For further information contact your local STMicroelectronics sales office.

BTA12, BTB12, T1205, T1210, T1235, T1250 Characteristics 1 Characteristics Table 1. Absolute maximum ratings (T = 25 °C unless otherwise stated) j Symbol Parameter Value Unit TO-220AB, D²PAK Tc = 105 °C IT(RMS) RMS on-state current (full sine wave) 12 A TO-220AB Ins. Tc = 90 °C f = 50 Hz t = 20 ms 120 ITSM Non repetitive surge peak on-state current (full cycle, Tj A initial = 25 °C) f = 60 Hz tp = 16.7 ms 126 I2t I2t value for fusing tp = 10 ms 78 A2s dl/dt Critical rate of rise of on-state current IG = 2 x IGT, tr ≤ f = 120 Hz Tj = 125 °C 50 A/µs 100 ns VDRM / VRRM + VDSM/VRSM Non repetitive surge peak off-state voltage tp = 10 ms Tj = 25 °C V 100 IGM Peak gate current tp = 20 µs Tj = 125 °C 4 A PG(AV) Average gate power dissipation Tj = 125 °C 1 W Tstg Storage junction temperature range -40 to +150 °C Tj Operating junction temperature range -40 to +125 °C Table 2. Electrical characteristics (T = 25 °C, unless otherwise specified) - Snubberless™ and logic level j (3 quadrants) T1235 T1250 T1205 T1210 BTB12- BTB12- Symbol Parameter Quadrant BTB12-TW BTB12-SW Unit CW BW BTA12-TW BTA12-SW BTA12-CW BTA12-BW IGT (1) I - II - III Max. 5 10 35 50 mA VD = 12 V, RL = 30 Ω VGT I - II - III Max. 1.3 V VGD VD = VDRM, RL = 3.3 kΩ, Tj = 125 °C I - II - III Min. 0.2 V IH (2) IT = 100 mA I - II - III Max. 10 15 35 50 mA I - III Max. 10 25 50 70 IL (2) IG = 1.2 x IGT mA II Max. 15 30 60 80 dV/dt (2) VD = 67% VDRM, gate open, Tj = 125 °C Max. 20 40 500 1000 V/µs (dV/dt)c = 0.1 V/µs, Tj = 125 °C Min. 3.5 6.5 (dl/dt)c (2) (dV/dt)c = 10 V/µs, Tj = 125 °C Min. 1.0 2.9 A/ms Without snubber, Tj = 125 °C Min. 6.5 12 1. Minimum IGT is guaranteed at 5 % of IGT max. 2. For both polarities of A2 referenced to A1 DS2115 - Rev 11 page 2/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Characteristics Table 3. Electrical characteristics (T = 25 °C, unless otherwise specified) - Standard Triac (4 quadrants) j Value Symbol Parameter Quadrant Unit C B I - II - III 25 50 IGT (1) Max. mA VD = 12 V, RL = 30 Ω IV 50 100 VGT All Max. 1.3 V VGD VD = VDRM, RL = 33 kΩ, Tj = 125 °C All Min. 0.2 V IH (2) IT = 500 mA I - II - III Max. 25 50 mA I - III - IV 40 50 IL IG = 1.2 IGT Max. mA II 80 100 dV/dt (2) VD = 67 % VDRM gate open, Tj = 125 °C Min. 200 400 V/µs (dV/dt)c (2) (dI/dt)c = 5.3 A/ms, Tj = 125 °C Min. 5 10 V/µs 1. Minimum IGT is guaranteed at 5 % of IGT max. 2. For both polarities of A2 referenced to A1 Table 4. Static electrical characteristics Symbol Test conditions Value Unit VTM (1) ITM = 17 A, tp = 380 µs Tj = 25 °C Max. 1.55 V VTO(1) threshold on-state voltage Tj = 125 °C Max. 0.85 V RD(1) Dynamic resistance Tj = 125 °C Max. 35 mΩ Tj = 25 °C Max. 5 µA IDRM IRRM VDRM = VRRM Tj = 125 °C Max. 1 mA 1. For both polarities of A2 referenced to A1 Table 5. Thermal resistance Symbol Parameter Value Unit D2PAK / TO-220AB Max. 1.4 Rth(j-c) Max. junction to case thermal resistance (AC) °C/W TO-220AB insulated Max. 2.3 Junction to ambient S = 2 cm² (1) D²PAK Typ. 45 Rth(j-a) °C/W Junction to ambient TO-220AB / TO-220AB insulated Typ. 60 1. S = Copper surface under tab. DS2115 - Rev 11 page 3/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Characteristics (curves) 1.1 Characteristics (curves) Figure 1. Maximum power dissipation versus on-state Figure 2. RMS on-state current versus case temperature RMS current (full cycle) (full cycle) P(W) IT(RMS)(A) 16 14 13 14 12 BTB /T12 12 11 BTA 10 10 9 8 8 7 6 6 5 4 4 3 2 2 IT(RMS)(A) 1 TC(°C) 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 0 25 50 75 100 125 Figure 3. RMS on-state current versus ambient Figure 4. Relative variation of thermal impedance versus temperature (printed circuit board FR4, copper thickness: pulse duration 35 μm) (full cycle) IT(RMS)(A) K=[Zth/Rth] 3.5 1E+0 3.0 (SD=2 1PcAmK2) Zth(j-c) 2.5 Zth(j-a) 2.0 1E-1 1.5 1.0 0.5 tP(s) TC(°C) 1E-2 0.0 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 0 25 50 75 100 125 DS2115 - Rev 11 page 4/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Characteristics (curves) Figure 6. Surge peak on-state current versus number of Figure 5. On-state characteristics (maximum values) cycles ITM(A) 100 ITSM(A) Tjmax. 130 Vto= 0.85V 120 Rd= 35 mΩ 110 100 t=20ms Tj=Tjmax. 90 Non repetitive One cycle 80 Tjinitial=25°C 10 Tj= 25°C. 70 60 Repetitive 50 TC=90°C 40 30 20 1 VTM(V) 10 Number of cycles 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1 10 100 1000 Figure 8. Relative variation of gate trigger current holding Figure 7. Non repetitive surge peak on-state current for a current and latching current versus junction temperature sinusoidal pulse (typical values) ITSM(A) dI/dt limitation: Tjinitial=25°C IGT, IH, IL[Tj] / IGT, IH, IL[Tj = 25 °C] 1000 50A/µs 2.5 ITSM 2.0 IGT 1.5 100 1.0 IH& IL for a sinusoidal pulse with width tP < 10 ms tP(ms) 0.5 10 0.01 0.10 1.00 10.00 0.0 Tj(°C) -40 -20 0 20 40 60 80 100 120 140 DS2115 - Rev 11 page 5/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Characteristics (curves) Figure 9. Relative variation of critical rate of decrease of Figure 10. Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values) main current versus (dV/dt)c (typical values)(TW) (dI/dt)c [(dV/dt)c] / specified (dI/dt)c (dI/dt)c [(dV/dt)c] / specified (dI/dt)c 5.0 2.8 4.5 2.4 4.0 TW, T1205 2.0 T1210/SW 3.5 C 3.0 1.6 B 2.5 T1235/T1250/CW/BW 1.2 2.0 0.8 1.5 1.0 0.4 (dV/dt)c(V/µs) 0.5 0.0 (dV/dt)c(V/µs) 0.0 0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0 Figure 11. Relative variation of critical rate of decrease of Figure 12. D2PAK thermal resistance junction to ambient main current versus junction temperature versus copper surface under tab (dl/dt)c [Tj] / (dl/dt)c [Tj specified] 80 Rth(j-a)(°C/W) 6 D²PAK 70 Epoxy printed board FR4, copper thickness = 35 µm 5 60 4 50 3 40 2 30 20 1 0 Tj(°C) 10 SCu(cm²) 0 25 50 75 100 125 0 0 5 10 15 20 25 30 35 40 DS2115 - Rev 11 page 6/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 D²PAK package information • ECOPACK2® compliant • Lead-free package leads finishing • Molding compound resin is halogen-free and meets UL standard level V0 Figure 13. D²PAK package outline E A E1 c2 E2 2 L 1 D D H 1 2 3 2 3 D L b2 e b Max resin gate protrusion: 0.5 mm (1) G A1 A2 A3 R L Gauge Plane c V2 (1) Resin gate is accepted in each of position shown on the drawing, or their symmetrical. DS2115 - Rev 11 page 7/16

BTA12, BTB12, T1205, T1210, T1235, T1250 D²PAK package information Table 6. D²PAK package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.30 4.60 0.1693 0.1811 A1 2.49 2.69 0.0980 0.1059 A2 0.03 0.23 0.0012 0.0091 A3 0.25 0.0098 b 0.70 0.93 0.0276 0.0366 b2 1.25 1.7 0.0492 0.0669 c 0.45 0.60 0.0177 0.0236 c2 1.21 1.36 0.0476 0.0535 D 8.95 9.35 0.3524 0.3681 D1 7.50 8.00 0.2953 0.3150 D2 1.30 1.70 0.0512 0.0669 e 2.54 0.1 E 10.00 10.28 0.3937 0.4047 E1 8.30 8.70 0.3268 0.3425 E2 6.85 7.25 0.2697 0.2854 G 4.88 5.28 0.1921 0.2079 H 15 15.85 0.5906 0.6240 L 1.78 2.28 0.0701 0.0898 L2 1.27 1.40 0.0500 0.0551 L3 1.40 1.75 0.0551 0.0689 R 0.40 0.0157 V2 0° 8° 0° 8° 1. Dimensions in inches are given for reference only DS2115 - Rev 11 page 8/16

BTA12, BTB12, T1205, T1210, T1235, T1250 D²PAK package information Figure 14. D²PAK recommended footprint (dimensions are in mm) 16.90 10.30 5.08 1.30 3.70 8.90 DS2115 - Rev 11 page 9/16

BTA12, BTB12, T1205, T1210, T1235, T1250 TO-220AB insulated and non insulated package information 2.2 TO-220AB insulated package information • Epoxy meets UL 94,V0 • Cooling method: by conduction (C) • Recommended torque value: 0.55 N·m • Maximum torque value: 0.70 N·m Figure 15. TO-220AB insulated and non insulated package outline B C b2 I Resin gate 0.5 mm max. protusion(1) L F A I4 l3 c2 a1 l2 a2 M c1 b1 Resin gate 0.5 mm max. protusion(1) e (1)Resin gate position accepted in one of the two positions or in the symmetrical opposites. DS2115 - Rev 11 page 10/16

BTA12, BTB12, T1205, T1210, T1235, T1250 TO-220AB insulated and non insulated package information Table 7. TO-220AB insulated and non insulated package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 15.20 15.90 0.5984 0.6260 a1 3.75 0.1476 a2 13.00 14.00 0.5118 0.5512 B 10.00 10.40 0.3937 0.4094 b1 0.61 0.88 0.0240 0.0346 b2 1.23 1.32 0.0484 0.0520 C 4.40 4.60 0.1732 0.1811 c1 0.49 0.70 0.0193 0.0276 c2 2.40 2.72 0.0945 0.1071 e 2.40 2.70 0.0945 0.1063 F 6.20 6.60 0.2441 0.2598 I 3.73 3.88 0.1469 0.1528 L 2.65 2.95 0.1043 0.1161 I2 1.14 1.70 0.0449 0.0669 I3 1.14 1.70 0.0449 0.0669 I4 15.80 16.40 16.80 0.6220 0.6457 0.6614 M 2.6 0.1024 1. Inch dimensions are for reference only. DS2115 - Rev 11 page 11/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Ordering information 3 Ordering information Figure 16. Ordering information scheme (BTA12 and BTB12 series) BT A 12 - 600 BW RG Triac series Insulation A = insulated B = non insulated Current 12 = 12A Voltage 600 = 600V 800 = 800V Sensitivity and type B = 50 mA standard BW = 50 mA Snubberless C = 25 mA standard CW = 35 mA Snubberless SW = 10 mA logic level TW = 5 mA logic level Packing mode RG = Tube Figure 17. Ordering information scheme (T12 series) T 12 35 - 600 G (-TR) Triac series Current 12 = 12 A Sensitivity 50 = 50 mA 35 = 35 mA 10 = 10 mA Voltage 600 or 6 = 600V 800 or 8 = 800V Package G = D2 PAK Packing mode Blank =Tube -TR =Tape and reel DS2115 - Rev 11 page 12/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Ordering information Table 8. Product selector Voltage (xxx) Part number Sensitivity Type Package 600 800 BTB12-600C X 25 mA Standard TO-220AB BTB12-600B X 50 mA Standard TO-220AB BTB12-600TW X 5 mA SnubberlessTM TO-220AB BTB12-600SW X 10 mA SnubberlessTM TO-220AB BTB12-xxxCW X X 35 mA SnubberlessTM TO-220AB BTB12-600BW X 50 mA SnubberlessTM TO-220AB BTA12-600C X 25 mA Standard TO-220AB Ins. BTA12-xxxB X X 50 mA Standard TO-220AB Ins. BTA12-600TW X 5 mA SnubberlessTM TO-220AB Ins. BTA12-xxxSW X X 10 mA SnubberlessTM TO-220AB Ins. BTA12-xxxCW X X 35 mA SnubberlessTM TO-220AB Ins. BTA12-xxxBW X X 50 mA SnubberlessTM TO-220AB Ins. T1205-600G X 5 mA SnubberlessTM D²PAK T1210-6G X 10 mA SnubberlessTM D²PAK T1210-800G X 10 mA SnubberlessTM D²PAK T1235-xxxG X X 35 mA SnubberlessTM D²PAK T1250-600G X 50 mA SnubberlessTM D²PAK DS2115 - Rev 11 page 13/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Ordering information Table 9. Ordering information Order code Marking Package Weight Base qty. Delivery mode BTA12-600BRG BTA12-600B BTA12-600BWRG BTA12-600BW BTA12-600CRG BTA12-600C BTA12-600CWRG BTA12-600CW BTA12-600SWRG BTA12-600SW TO-220AB Ins. BTA12-600TWRG BTA12-600TW BTA12-800BRG BTA12-800B BTA12-800BWRG BTA12-800BW BTA12-800CWRG BTA12-800CW 1.9 g 50 Tube BTA12-800SWRG BTA12-800SW BTB12-600BRG BTB12-600B BTB12-600BWRG BTB12-600BW BTB12-600CRG BTB12-600C BTB12-600CWRG BTB12-600CW TO-220AB BTB12-600SWRG BTB12-600SW BTB12-600TWRG BTB12-600TW BTB12-800CWRG BTB12-800CW T1205-600G-TR T1205-600G T1210-6G-TR T1210-6G T1210-800G-TR T1210-800G 1000 Tape and reel 13" T1235-600G-TR T1235-600G D²PAK 1.38 g T1235-800G-TR T1235-800G T1250-600G-TR T1250-600G T1210-6G T1210-6G 50 Tube T1235-600G T1235-600G DS2115 - Rev 11 page 14/16

BTA12, BTB12, T1205, T1210, T1235, T1250 Table 10. Document revision history Date Revision Changes Sep-2002 6A Last update. 1. I2PAK package added. 15-Mar-2005 7 2. TO-220AB delivery mode changed from bulk to tube. 27-May-2005 8 T1210 added. 28-Sep-2007 9 Reformatted to current standards. T1250 added. Removed I²PAK package. 02-Feb-2017 10 Updated Figure 7: "Non-repetitive surge peak on-state current" and Table 9: "Product selector" and Table 10: "Ordering information". 9-Aug-2018 11 Updated D²PAK package information and Figure 10.. Updated Section ● Product status / summary. DS2115 - Rev 11 page 15/16

BTA12, BTB12, T1205, T1210, T1235, T1250 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS2115 - Rev 11 page 16/16

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: T1235-600G T1235-600G-TR BTB12-800BRG T1235-800G-TR T1235-600R T1210-6G-TR T1210-6G BTA12- 600C