Available at Digi-Key** www.digikey.com High Precision TCXO / VCTCXO Oscillators Description: Features: 2111 Comprehensive Drive The Connor-Winfield’s T100/T200 and Models: Aurora, Illinois 60505 T100 / T200-Series the TV100/TV200 series have very PFhaoxn:e 6: 3603-08-5815-15-0447202 hpihgahs fer enqouiseen cpye rsftoarbmilaitnyc wei.t hA veaxiclaebllleen t T2200.00VM1H2Z41 • P TTa1Vc01k0a0-g0Te /2 T0V0 2S0e0r-ieSse 5ri exs 7mm 10 Pad www.conwin.com in a 5x7mm surface mount package. TV100-TV200 Series 5 x 7mm 4 Pad These TCXO's and VCTCXO's through • Frequencies Available: See frequency listing on page 2. the use of Analog Temperature • 3.3 Vdc Operation Compensation are capable of holding • Output Logic: LVCMOS sub 100-ppb or 200-ppb stabilities • Frequency Stability: over the commercial or industrial T100 / TV100: +/-100 ppb, 0 to 70°C temperature ranges. The surface T200 / TV200: +/-200 ppb, -40 to 85°C mount package is designed for high- • Fixed Frequency - TCXO • Optional Control Voltage - VCTCXO density mounting and is optimum for • Low Jitter <0.50 ps RMS mass production. • Low Phase Noise • Tri-State Enable/Disable: Available on T100 / T200 Models. • Tape and Reel Packaging Applications: • RoHS Compliant / Lead Free Basestation, Communications, DSL / ADSL, Femtocell, IP Timing, LTE, Precision GPS, SONET / SDH, WiMAX / WiBro, WLAN. Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -40 - 85 °C Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage (Vc) -0.5 - Vcc + 0.5 Vdc Ordering Information T 200 V - 20.0M Type / Package Frequency Stability and TCXO or VCTCXO Output Frequency Temperature Range TCXO / VCTCXO F = TCXO Frequency Format Series 100 = ±100 ppb, 0 to 70°C V = VCTCXO -xxx.xM Min* 200 = ±200 ppb, -40 to 85°C -xxx.xxxxxxM Max* T = 5.0x7.0 mm 10 Pads *Min 1 and Max 6 digits TV = 5.0x7.0 mm 4 Pads Supply Voltage = 3.3 Vdc after decimal point. Output Logic = LVCMOS Example: Part Number T100F-019.2M = 5x7mm 10 pad package, ±100 ppb, 0 to 70°C, 3.3 Vdc, LVCMOS Output, TCXO, 19.2 MHz T200V-020.0M = 5x7mm 10 pad package, ±200 ppb, -40 to 85°C, 3.3 Vdc, LVCMOS Output, VCTCXO, 20.0 MHz Bulletin Tx350 TV100F-010.0M = 5x7mm 4 pad package, ±100 ppb, 0 to 70°C, 3.3 Vdc, LVCMOS Output, TCXO, 10.0 MHz Page 1 of 6 TV200V-012.8M = 5x7mm 4 pad package, ±200 ppb, -40 to 85°C, 3.3 Vdc, LVCMOS Output, VCTCXO, 12.8 MHz Revision 09 Date 20 March 2018

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Operating Specifications Parameter Minimum Nominal Maximum Units Notes Available Output Frequencies (Fo) 10.0 MHz 12.8 MHz 14.7456 MHz 19.2 MHz 20.0 MHz 24.576 MHz 25.0 MHz 40.0 MHz 50.0 MHz Frequency Calibration @ 25 °C -1.0 - 1.0 ppm 1 Frequency Stability (See Ordering Information for full part number) Model T100x, TV100x -100 - 100 ppb 2 Model T200x, TV200x -200 - 200 ppb 2 Frequency vs. Load Stability -0.05 - 0.05 ppm ±5% Frequency vs. Voltage Stability -0.05 - 0.05 ppm ±5% Static Temperature Hysteresis - - 0.40 ppm 3 Freq. shift after reflow soldering -1.0 - 1.0 ppm 4 Long Term Stability -1.0 - 1.0 ppm 5 Aging per Life (20 Years) -3.0 - 3.0 ppm per Day -40 - 40 ppb per Second - 4.63E-13 Operating Temperature Range (See Ordering Information for full part number) Model T100x, TV100x 0 - 70 °C Model T200x, TV200x -40 - 85 °C Supply Voltage (Vcc) 3.135 3.30 3.465 Vdc Supply Current (Icc) - - 6.5 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter (12K to 20M) - 0.3 1.0 ps RMS 6 SSB Phase Noise for Fo=10.0 MHz @ 1 Hz offset - -60 - dBc/Hz @ 10 Hz offset - -98 - dBc/Hz @ 100 Hz offset - -126 - dBc/Hz @ 1 KHz offset - -143 - dBc/Hz @ 10 KHz offset - -151 - dBc/Hz @ 100 KHz offset - -152 - dBc/Hz @ 1 MHz offset - -155 - dBc/Hz Start-Up Time - - 10 ms Control Voltage Input Characteristics Parameter Minimum Nominal Maximum Units Notes Control Voltage 0.3 1.65 3.0 V Frequency Pullability ±10 - - ppm Control Voltage Slope Positive Slope Monotonic Linearity - - 10 % Input Impedance 100K - - Ohm Modulation Bandwidth (3dB) 10 - - KHz Bulletin Tx350 Page 2 of 6 Revision 09 Date 20 March 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Enable /Disable Input Characteristics (Pad 8) (Models T100F, T200F, T100V and T200V Only) Parameter Minimum Nominal Maximum Units Notes Enable Input Voltage -(Vih) 70%Vcc - - Vdc 7 Disable Input Voltage - (Vil) - - 30%Vcc Vdc 7 Function Output Low: Disabled (High Impedance) High or Open: Enabled LVCMOS Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load (CL) - 15 - pF 8 Voltage (High) (Voh) 90%Vcc - - Vdc (Low) (Vol) - - 10%Vcc Vdc Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time 10% to 90% - 4 8 ns Package Characteristics Package Hermetically sealed ceramic package with grounded metal cover Environmental Characteristics Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process: RoHS compliant lead free. See soldering profile on page 6. Notes: 1. Initial calibration @ 25°C. ±2°C, for VCTCXO's Vc = 1.65V. Specifications at time of shipment after 48 hours of operation. 2. Frequency stability vs. change in temperature. [±(Fmax-Fmin)/2.Fo]. For VCTCXO's - Vc -= 1.65V 3. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C 4. Two consecutive reflows after 1 hour recovery @ 25°C. 5. Frequency drift over 1 year @ 25°C. 6. BW = 12 KHz to Fo/2 MHz 7. Leave Pad 8 on models, T100F, T200F, T100V, T200V unconnected if enable / disable function is not required. When tri-stated, the output stage is disabled but the oscillator and compensation circuit are still active (current consumption < 1 mA). 8. Attention: To achieve optimal frequency stability, and in some cases to meet the specification stated on this data sheet, it is required that the circuit connected to this TCXO output must have the equivalent input capacitance that is specified by the nominal load capacitance. Deviations from the nominal load capacitance will have a graduated effect on the stability of approximately 20 ppb per pF load difference. Bulletin Tx350 Page 3 of 6 Revision 09 Date 20 March 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com T100/T200 T100/T200 T100/T200 Package Outline Suggested Pad Layout Pad Connections 0.276±0.006 0.095Max. (7.0mm) (2.4mm Max) 0.295 (7.49mm) 0.051 1: Do Not Connect 0.030 (1.28mm) (0.76mm) KeepOutArea 2: Do Not Connect 0.197 8 7 6 3: Do Not Connect (5±0.0.0m0m6) (00.9.043m7m) 9 TopView 5 4: Ground 0.215 5: Output (5.46mm) 10 4 Pad1 (TopView) 1 2 3 (10.2.085m1m) 6: Do Not Connect 7: Do Not Connect Pin1 1 02.025(6Places) 8: Enable / Disable (0.635mDmim)ension0a.l0T4o0lerance: 1 2 3 ±.005(.1(217.0m2mmm)) 9: Supply Voltage (Vcc ((400.P9((.040l0a.073mPc.60l4ea2m3cms0e))ms)) 140(BottoBmVoitetVowimew)34 ±(2.00.5.2140m0(m.5)(068Pmlamce)s) *a rDeoa .n Iot tis r oreucteo manmye tnradceeds tihne t hnee xkte leapye oru ut nder 1 0: VTCCXTCOX: ON:/ CControl Voltage (Vc) 9 5 0.055 8 7 6 Dim(1e.n4s0iomnmal)Tolerance: the keep out area is to be ground plane. ((04.09P.60la53cm8ems)) (20.5.140m0m) ±±..00(0245P((..la1520c78emms)mm)) TV100/TV200 TV100/TV200 TV100/TV200 Package Outline Suggested Pad Layout Pad Connections 0.276±0.006 0.095Max. (7.0mm) (2.4mm Max) 0.071 (1.8mm) 4Places 1: VCTCXO: Voltage Control (Vc) 4 3 0.197 TCXO: N/C ±0.006 2: Ground (5.0mm) 0.165 0.047 3: Output (TopView) (4.2mm) (TopView) (1.2mm) 4: Supply (Vcc) Pad1 4Places Keep 1 2 Out * DimensionalTolerance: ±.005(.127mm) 1 0.224 2 Area 0.034 (BottomView) ±.02 (.508mm) (5.7mm) (0.90mm) (4Places) 4 3 * Do not route any traces in the keep out 0.055 area. It is recommended the next layer under (1.40mm) the keep out area is to be ground plane. (4Places) Bulletin Tx350 Page 4 of 6 Revision 09 Date 20 March 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Marking Information The marking varies with design configuration. All marking configurations below are valid. T100 / T200 Design Recommendations T100 / T200 Test Circuit Vcc,shouldhave alargecopper areinadfuocrtraendcuec.ed 0.010”(0.254mm) Vcc 50Ohmtrace Connecta0.01uF Recommended <1”bydesign bypasscapacitor clearance Enable/ <0.1”(2.54mm) 8 6 inductance Disable DNCDNC fromthepad. 9 5 forinternal Buffer copperflood. 10 1 3 4 Ground, Ground SVuoVplctapcglye 9 8 7 6 5 Output TopView aslhaorgueldchoapvpeer TopView Ground Ground areaforreduced 10 4 inductance. 1 2 3 15pF 0.1uF 10nF 50OhmTrace Bypass Bypass VTCCTXCOXO==N/VCc DNC DNCDNC OSC Without Output DNC=DoNotConnect Vias Buffer TOPLAYER GROUNDLAYER ....... BOTTOMLAYER TV100 / TV200 Design Recommendations TV100 / TV200 Test Circuit Vcc,shouldhave alargecopper 0.010”(0.254mm) areaforreduced Recommended Vcc 50Ohmtrace Vcc Coninndeuccttaan0c.e0.1uF incdleuacrtaannccee <1”bydesign SVuopltapglye 4 3 Output bypasscapacitor forinternal <fr0o.m1”(t2h.e54pmadm.) 4 3 copperflood. Buffer 1 2 Ground 9 5 Ground 15pF 10 4 1 2 Ground, 0.1uF 10nF TCXO=N/C shouldhave TopView Ground Bypass Bypass VCTCXO=Vc TopView alargecopper areaforreduced inductance. 50OhmTrace OSC Without Output Vias Buffer TOPLAYER GROUNDLAYER Bulletin Tx350 ....... Page 5 of 6 BOTTOMLAYER Revision 09 Date 20 March 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com LVCMOS Output Waveform Typical Phase Noise for TV100F-010.0M 1V/Div Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 10s Upto120s 60to90s Typical Typical 5x7 mm Tape and Reel Information MeetsIPC/JEDECJ-STD-020C 1 Revision History Revision Date Changes A00 12/05/11 Advanced information data sheet released A01 04/24/12 Added 12.8 MHz and +/-50ppb 0 to 70°C Models 02 04/26/12 Updated integrated phase jitter to 0.3 ps RMS nominal. 03 10/12/12 Removed M series 04 01/09/13 Updated phase noise information 05 02/04/15 Updated to 24.576 MHz and 40.0 MHz Frequencies 06 06/15/16 Input Voltage, Frequency vs Load and Voltage Stability edits 07 09/28/16 Update Marking Information 08 04/25/17 Corrected T100/T200 package drawing bottom view 09 03/20/18 Removed Alternate Package information, changed product height to 2.4mm Max and updated max supply current. Bulletin Tx350 Page 6 of 6 Revision 09 Date 20 March 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.