STTH8R06 Turbo 2 ultrafast high voltage rectifier Datasheet - production data Description The STTH8R06, which uses ST Turbo 2 600 V (cid:36) (cid:46) technology, is specially suited as boost diode in continuous mode power factor corrections and hard switching conditions. Table 1. Device summary Symbol Value (cid:36) I 8 A F(AV) (cid:36) (cid:46) V 600 V RRM (cid:55)(cid:50)(cid:16)(cid:21)(cid:21)(cid:19)(cid:36)(cid:38) (cid:46) (cid:55)(cid:50)(cid:16)(cid:21)(cid:21)(cid:19)(cid:41)(cid:51)(cid:36)(cid:38) I (typ) 5.5 A RM (cid:46) T (max) 175 °C j V (typ) 1.4 V F t (max) 25 ns rr (cid:36) (cid:49)(cid:38) (cid:36) (cid:39)(cid:240)(cid:51)(cid:36)(cid:46) (cid:55)(cid:50)(cid:16)(cid:21)(cid:21)(cid:19)(cid:36)(cid:38)(cid:3)(cid:76)(cid:81)(cid:86)(cid:88)(cid:79)(cid:68)(cid:87)(cid:72)(cid:71) (cid:46) Features • Ultrafast switching • Low reverse recovery current • Low thermal resistance • Reduces switching losses • Package insulation voltage: – TO-220AC Ins: 2500 V sine RMS – TO-220FPAC: 2000 V sine RMS April 2015 DocID7688 Rev 8 1/16 This is information on a product in full production. www.st.com

Characteristics STTH8R06 1 Characteristics Ta b le 2. Absolute ratings (limiting values at 25 °C unless otherwise specified) Symbol Parameter Value Unit V Repetitive peak reverse voltage 600 V RRM TO-220AC / TO-220FPAC / D2PAK 30 I Forward current rms A F(RMS) TO-220AC ins. 24 TO-220AC / D2PAK T = 130 °C Average forward c I current δ = 0.5, TO-220FPAC T = 85 °C 8 A F(AV) c square wave TO-220AC ins. T = 100 °C c I Surge non repetitive forward current t = 10 ms sinusoidal 80 A FSM p T Storage temperature range -65 to + 175 °C stg T Maximum operating junction temperature 175 °C j Table 3. Thermal resistance Symbol Parameter Value (max) Unit TO-220AC / D2PAK 2.2 R Junction to case TO-220FPAC 4.6 °C/W th(j-c) TO-220AC ins. 3.8 Table 4. Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 °C 30 j I Reverse leakage current V = V µA R R RRM T = 125 °C 35 400 j T = 25 °C 2.9 j V Forward voltage drop I = 8 A V F F T = 125 °C 1.4 1.8 j To evaluate the conduction losses use the following equation: P = 1.16 x I + 0.08 I 2 F(AV) F (RMS) 2/16 DocID7688 Rev 8

STTH8R06 Characteristics Table 5. Dynamic characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit I = 0.5 A, F 25 I = 0.25 A, I =1 A rr R trr Reverse recovery time Tj = 25 °C IF = 1 A, ns dI /dt = -50 A/µs, 45 F V = 30 V R I Reverse recovery current 5.5 7.2 A RM I = 8 A, V = 400 V, S factor Softness factor T = 125 °C F R 0.3 j dI /dt = -200 A/µs F Q Reverse recovery charges 150 nC rr t Forward recovery time I = 8 A, 150 ns fr F T = 25 °C dI /dt = 64 A/µs j F V Forward recovery voltage 5 V FP V = 1.1 x V FR Fmax Figure 1. Conduction losses versus average Figure 2. Forward voltage drop versus forward current current P(W) IFM(A) 24 100 22 90 Tj=125°C 20 δ= 0.05 δ= 0.1 δ= 0.2 δ= 0.5 80 (maximum values) 18 70 16 Tj=125°C (typical values) 14 δ= 1 60 12 50 Tj= 25°C (maximum values) 10 40 8 30 6 T 20 4 2 IF(AV)(A) δ=tp/T tp 10 VFM(V) 0 0 0 2 4 6 8 10 0 1 2 3 4 5 6 7 DocID7688 Rev 8 3/16 16

Characteristics STTH8R06 Figure 3 . Relative variation of thermal Figure 4. Relative variation of thermal impedance junction to case versus pulse impedance junction to case versus pulse duration duration Zth(j-c)/Rth(j-c) (cid:61)(cid:87)(cid:75)(cid:11)(cid:77)(cid:16)(cid:70)(cid:12)(cid:18)(cid:53)(cid:87)(cid:75)(cid:11)(cid:77)(cid:16)(cid:70)(cid:12) 1.0 (cid:20)(cid:17)(cid:19) TO-220FPAC insulated (cid:19)(cid:17)(cid:28) (cid:55)(cid:50)(cid:16)(cid:21)(cid:21)(cid:19)(cid:36)(cid:38)(cid:15)(cid:3)(cid:39)(cid:240)(cid:51)(cid:36)(cid:46) 0.9 (cid:19)(cid:17)(cid:27) 0.8 (cid:19)(cid:17)(cid:26) 0.7 (cid:19)(cid:17)(cid:25) 0.6 (cid:19)(cid:17)(cid:24) 0.5 (cid:19)(cid:17)(cid:23) 0.4 (cid:19)(cid:17)(cid:22) (cid:54)(cid:76)(cid:81)(cid:74)(cid:79)(cid:72)(cid:3)(cid:83)(cid:88)(cid:79)(cid:86)(cid:72) 0.3 (cid:55) T (cid:19)(cid:17)(cid:21) 0.2 Single pulse (cid:19)(cid:17)(cid:20) (cid:87)(cid:83)(cid:11)(cid:86)(cid:12) (cid:303)(cid:32)(cid:87)(cid:83)(cid:18)(cid:55) (cid:87)(cid:83) 0.1 tp(s) δ=tp/T tp (cid:19)(cid:17)(cid:19) 0.0 (cid:20)(cid:17)(cid:40)(cid:16)(cid:19)(cid:22) (cid:20)(cid:17)(cid:40)(cid:16)(cid:19)(cid:21) (cid:20)(cid:17)(cid:40)(cid:16)(cid:19)(cid:20) (cid:20)(cid:17)(cid:40)(cid:14)(cid:19)(cid:19) 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 Figure 5. Peak reverse recovery current versus Figure 6. [Reverse recovery time versus dI /dt F dI /dt (typical values) (typical values) F IRM(A) trr(ns) 22 120 20 VTjR==142050°CV IF=2 x IF(AV) 110 VTjR==142050°CV 18 100 16 IF=IF(AV) 90 80 14 IF=0.5 x IF(AV) 70 12 60 IF=2 x IF(AV) 10 IF=0.25 x IF(AV) 50 IF=IF(AV) 8 40 IF=0.5 x IF(AV) 6 30 4 20 2 dIF/dt(A/µs) 10 dIF/dt(A/µs) 0 0 0 200 400 600 800 1000 0 200 400 600 800 1000 Figure 7. Reverse recovery charges versus Figure 8. Softness factor versus dI /dt (typical F dI /dt (typical values) values) F 350 QRR(nC) S factor 0.70 300 TVjR== 1 42050°VC IF= 2 x IF(AV) 0.65 ITVFjR≤==214 2x05 I0°FCV(AV) IF= IF(AV) 0.60 250 0.55 IF= 0.5 x IF(AV) 0.50 200 0.45 0.40 150 IF= 0.25 x IF(AV) 0.35 0.30 100 IF= 0.1 x IF(AV) 0.25 50 0.20 dIF/dt(A/µs) 0.15 dIF/dt(A/µs) 0 0.10 0 200 400 600 800 1000 0 200 400 600 800 1000 4/16 DocID7688 Rev 8

STTH8R06 Characteristics Figure 9 . Relative variations of dynamic Figure 10. Transient peak forward voltage parameters versus junction temperature versus dI /dt (typical values) F VFP(V) 2.50 12 2.25 IF=IF(AV) 11 ITFj==I1F2(A5V°)C VR=400V 10 2.00 Reference:Tj=125°C 9 1.75 Sfactor 8 1.50 7 1.25 6 1.00 5 0.75 IRM 4 3 0.50 QRR 2 0.25 Tj(°C) 1 dIF/dt(A/µs) 0.00 0 25 50 75 100 125 0 100 200 300 400 500 Figure 11. Forward recovery time versus Figure 12. Junction capacitance versus reverse dI /dt (typical values) voltage applied (typical values) F tfr(ns) C(pF) 160 100 IF=IF(AV) F=1MHz 140 VFR=T1j.=11 x25V°FCmax. VOSCT=j=3205m°CVRMS 120 100 80 60 40 20 dIF/dt(A/µs) VR(V) 0 10 0 100 200 300 400 500 1 10 100 1000 Figure 13. Thermal resistance junction to ambient versus copper surface under tab (cid:53)(cid:87)(cid:75)(cid:11)(cid:77)(cid:16)(cid:68)(cid:12)(cid:11)(cid:131)(cid:38)(cid:18)(cid:58)(cid:12) (cid:27)(cid:19) (cid:26)(cid:19) (cid:40)(cid:83)(cid:82)(cid:91)(cid:92)(cid:3)(cid:83)(cid:85)(cid:76)(cid:81)(cid:87)(cid:72)(cid:71)(cid:3)(cid:69)(cid:82)(cid:68)(cid:85)(cid:71)(cid:3)(cid:41)(cid:53)(cid:23)(cid:15)(cid:3)(cid:72)(cid:38)(cid:88)(cid:3)(cid:32)(cid:3)(cid:22)(cid:24)(cid:3)(cid:151)(cid:80)(cid:3) (cid:39)(cid:240)(cid:51)(cid:36)(cid:46) (cid:25)(cid:19) (cid:24)(cid:19) (cid:23)(cid:19) (cid:22)(cid:19) (cid:21)(cid:19) (cid:20)(cid:19) (cid:54)(cid:70)(cid:88)(cid:11)(cid:70)(cid:80)(cid:240)(cid:12) (cid:19) (cid:19) (cid:24) (cid:20)(cid:19) (cid:20)(cid:24) (cid:21)(cid:19) (cid:21)(cid:24) (cid:22)(cid:19) (cid:22)(cid:24) (cid:23)(cid:19) DocID7688 Rev 8 5/16 16

Package information STTH8R06 2 Package information • Epoxy meets UL94, V0 • Cooling method: by conduction (C) • Recommended torque values: 0.55 N·m (TO-220FPAC, TO-220AC, TO-220AC ins.) • Maximum torque values: 0.7 N·m (TO-220FPAC, TO-220AC, TO-220AC ins.) In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 TO-220AC package information Figure 14. TO-220AC package outline H2 A Ø I C L5 L7 L6 L2 D F1 L9 L4 F M E G 6/16 DocID7688 Rev 8

STTH8R06 Package information Table 6. TO-220AC dimension values Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 L2 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M 2.6 typ. 0.102 typ. Diam. I 3.75 3.85 0.147 0.151 DocID7688 Rev 8 7/16 16

Package information STTH8R06 2.2 TO-220FPAC package information Figure 15. TO-220FPAC package outline A H B Dia L6 L2 L7 L3 D F1 L4 F E G1 G 8/16 DocID7688 Rev 8

STTH8R06 Package information Table 7. TO-220FPAC dimension values Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 L4 9.8 10.6 0.386 0.417 L6 15.9 16.4 0.626 0.646 L7 9.00 9.30 0.354 0.366 Dia. 3.00 3.20 0.118 0.126 DocID7688 Rev 8 9/16 16

Package information STTH8R06 2.3 TO-220AC package information Figure 16. TO-220AC insulated package outline B C Ø I b2 L F A I4 c2 a1 l2 a2 M c1 b1 e 10/16 DocID7688 Rev 8

STTH8R06 Package information Table 8. TO-220AC insulated dimension values Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 15.20 15.90 0.598 0.625 a1 3.75 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 4.80 5.40 0.189 0.212 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.151 I4 15.80 16.40 16.80 0.622 0.646 0.661 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 M 2.60 0.102 DocID7688 Rev 8 11/16 16

Package information STTH8R06 2.4 D²PAK package information Figure 17. D2PAK package outline (cid:40) (cid:36) (cid:70)(cid:21) (cid:47)(cid:20) (cid:39) (cid:43) (cid:47)(cid:21) (cid:45)(cid:20) (cid:69) (cid:69)(cid:21) (cid:72) (cid:70) (cid:72)(cid:20) (cid:40)(cid:20) (cid:40)(cid:21) (cid:39)(cid:20) (cid:36)(cid:20) (cid:39)(cid:21) (cid:47) (cid:53) (cid:19)(cid:17)(cid:21)(cid:24) (cid:42)(cid:68)(cid:88)(cid:74)(cid:72)(cid:3)(cid:83)(cid:79)(cid:68)(cid:81)(cid:72) (cid:57)(cid:21) 12/16 DocID7688 Rev 8

STTH8R06 Package information Table 9. D2PAK package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.40 4.60 0.173 0.181 A1 0.03 0.23 0.001 0.009 b 0.70 0.93 0.027 0.037 b2 1.14 1.70 0.045 0.067 c 0.45 0.60 0.017 0.023 c2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 7.50 7.75 8.0 0.295 0.305 0.315 D2 1.10 1.30 1.50 0.043 0.051 0.060 E 10.00 10.40 0.393 0.409 E1 8.50 8.70 8.90 0.334 0.342 0.350 E2 6.85 7.05 7.25 0.269 0.277 0.285 e 2.54 0.1 e1 4.88 5.28 0.192 0.208 H 15.00 15.85 0.590 0.624 J1 2.49 2.69 0.098 0.106 L 2.29 2.79 0.090 0.110 L1 1.27 1.40 0.050 0.055 L2 1.30 1.75 0.051 0.069 R 0.40 typ. 0.016 typ. V2 0° 8° 0° 8° DocID7688 Rev 8 13/16 16

Package information STTH8R06 Figure 18. D2PAK footprint (dimensions in mm) (cid:20)(cid:25)(cid:17)(cid:28)(cid:19) (cid:20)(cid:21)(cid:17)(cid:21) (cid:24)(cid:17)(cid:19)(cid:27) (cid:21)(cid:17)(cid:24)(cid:23) (cid:20)(cid:17)(cid:25)(cid:19) (cid:22)(cid:17)(cid:24)(cid:19) (cid:28)(cid:17)(cid:26)(cid:24) 14/16 DocID7688 Rev 8

STTH8R06 Ordering information 3 Ordering information Table 10. Ordering information Order code Marking Package Weight Base qty Delivery mode STTH8R06D STTH8R06D TO-220AC 1.90 g 50 Tube STTH8R06G-TR STTH8R06G D2PAK 1.38 g 1000 Tape and reel STTH8R06FP STTH8R06FP TO-220FPAC 1.90 g 50 Tube STTH8R06DIRG STTH8R06DI TO-220AC Ins. 1.76 g 50 Tube 4 Revision history Table 11. Document revision history Date Revision Changes May-2001 1 First issue January-2002 2 D2PAK and I2PAK packages added 18-Oct-2004 3 TO-220AC Insulated package added 05-Dec-2004 4 D2PAK foot print correction Reformatted to current standard. Added package insulation voltage 10-Aug-2006 5 data on page 1. Changed order code STTH8R06DI to STTH8R06DIRG. Reformatted to current standards. Corrected label for right hand curve in Figure2 from T = 125 °C to T = 25 °C. Updated torque 16-Apr-2008 6 j j value recommendations and added ECOPACK statement in Section2: Package information. Corrected order code in Table10. 22-Oct-2013 7 Updated Figure7. Removed I²PAK package information. Updated D²PAK package 30-Apr-2015 8 information and reformatted to current standard. DocID7688 Rev 8 15/16 16

STTH8R06 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved 16/16 DocID7688 Rev 8

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: STTH8R06D STTH8R06FP STTH8R06DIRG STTH8R06G-TR STTH8R06G