STTH8L06 Turbo 2 ultrafast high voltage rectifier Features K ■ Ultrafast switching ■ Low reverse recovery current A ■ Low thermal resistance A K K ■ Reduces switching and conduction losses TO-220AC TO-220FPAC ■ Package insulation voltage: STTH8L06D STTH8L06FP – TO-220AC Ins: 2500 V rms – TO-220FPAC: 2000 V DC K Description A NC K A The STTH8L06, which is using ST Turbo2 600 V technology, is specially suited as boost diode in D2PAK TO-220AC Insulated STTH8L06G STTH8L06DIRG discontinuous or critical mode power factor corrections. T able 1. Device summary The device is also intended for use as a free wheeling diode in power supplies and other power Symbol Value switching applications. I 8 A F(AV) V 600 V RRM I (max) 200 µA R T 175 °C j V (typ) 0.85 V F t (typ) 75 ns rr February 2012 Doc ID 8373 Rev 6 1/11 www.st.com 11

Characteristics STTH8L06 1 Characteristics Table 2. A bsolute ratings (limiting values) Symbol Parameter Value Unit V Repetitive peak reverse voltage 600 V RRM TO-220AC / TO-220FPAC / D2PAK 30 I Forward rms current A F(RMS) TO-220AC Ins. 24 TO-220AC / D2PAK T = 150 °C c Average forward current I TO-220FPAC T = 125 °C 8 A F(AV) δ = 0.5 c TO-220AC Ins. T = 135 °C c I Surge non repetitive forward current t = 10 ms sinusoidal 120 A FSM p T Storage temperature range -65 to 175 °C stg T Operating junction temperature range -40 to 175 °C j Table 3. T hermal resistance Symbol Parameter Value (max) Unit TO-220AC / D2PAK 2.5 R Junction to case TO-220FPAC 5 °C/W th(j-c) TO-220AC Ins. 4 Table 4. Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 °C 8 j I Reverse leakage current V = V µA R R RRM T = 150 °C 16 200 j T = 25 °C 1.3 j V Forward voltage drop I = 8 A V F F T = 150 °C 0.85 1.05 j To evaluate the conduction losses use the following equation: P = 0.89 x I + 0.022 I 2 F(AV) F (RMS) Table 5. D ynamic characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit Reverse t T = 25 °C I = 1 A, dI /dt = -50 A/µs V = 30 V 75 105 ns rr recovery time j F F R Reverse I = 8 A, dI /dt = 100 A/µs, I T = 125 °C F F 7.2 10 A RM recovery current j V = 400 V R Forward I = 8 A, dI /dt = 100 A/µs t F F 150 ns fr recovery time V = 1.1 x V FR Fmax T = 25°C j Forward I = 8 A, dI /dt = 100 A/µs V F F 6 V FP recovery voltage 2/11 Doc ID 8373 Rev 6

STTH8L06 Characteristics Figure 1. C onduction losses versus Figure 2. Forward voltage drop versus average current forward current P(W) IFM(A) 11 100.0 10 δ= 0.05 δ= 0.1 δ= 0.2 δ= 0.5 (maxTimj=u1m50 v°aClues) 9 δ= 1 Tj=25°C 8 Tj=150°C (maximum values) 10.0 (typical values) 7 6 5 4 1.0 3 T 2 1 IF(AV)(A) δ=tp/T tp VFM(V) 0 0.1 0 2 4 6 8 10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Figure 3. R elative variation of thermal Figure 4. Relative variation of thermal impedance junction to case versus impedance junction to case versus pulse duration (TO-220FPAC) pulse duration Zth(j-c)/Rth(j-c) Zth(j-c)/Rth(j-c) 1.0 1.0 0.9 0.9 (TO-220AC,TO-220AC Ins,D2 PAK) 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 Single pulse 0.2 Single pulse T 0.2 T 0.1 tp(s) δ=tp/T tp 0.1 tp(s) δ=tp/T tp 0.0 0.0 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 1.E-03 1.E-02 1.E-01 1.E+00 Figure 5. P eak reverse recovery current Figure 6. Reverse recovery time versus versus dI /dt (typical values) dI /dt (typical values) F F IRM(A) trr(ns) 14 1000 1123 VTjR==142050°CV IF=2 x IF(AV) 900 VTjR==142050°CV 11 800 IF=IF(AV) 10 700 9 IF=0.5 x IF(AV) 600 8 7 IF=0.25 x IF(AV) 500 IF=2 x IF(AV) 6 400 IF=IF(AV) 5 4 300 IF=0.5 x IF(AV) 3 200 2 1 dIF/dt(A/µs) 100 dIF/dt(A/µs) 0 0 0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200 Doc ID 8373 Rev 6 3/11

Characteristics STTH8L06 Figure 7. R everse recovery charges Figure 8. Softness factor versus versus dI /dt (typical values) dI /dt (typical values) F F Qrr(nC) S factor 1000 2.0 900 VTjR==142050°CV IF=2 x IF(AV) 1.8 IVFR≤=24 x0 I0FV(AV) Tj=125°C 800 1.6 700 IF=IF(AV) 1.4 600 1.2 500 IF=0.5 x IF(AV) 1.0 400 0.8 300 0.6 200 0.4 100 dIF/dt(A/µs) 0.2 dIF/dt(A/µs) 0 0.0 0 20 40 60 80 100 120 140 160 180 200 0 25 50 75 100 125 150 175 200 Figure 9. R elative variations of dynamic Figure 10. Transient peak forward voltage parameters versus junction versus dI /dt (typical values) F temperature VFP(V) 1.25 7 Sfactor IF=IF(AV) Tj=125°C 6 1.00 5 IRM 0.75 QRR 4 0.50 3 IF≤2 x IF(AV) 2 0.25 VR=400V Reference:Tj=125°C Tj(°C) 1 0.00 dIF/dt(A/µs) 25 50 75 100 125 0 0 20 40 60 80 100 120 140 160 180 200 Figure 11. F orward recovery time versus Figure 12. Junction capacitance versus dI /dt (typical values) reverse voltage applied (typical F values) tfr(ns) C(pF) 300 1000 250 VFR=T1IFj.=1=1 Ix2F(5VA°VFC)max. VOSFCT==j=132M05m°HCVzRMS 200 100 150 100 10 50 dIF/dt(A/µs) VR(V) 0 1 0 20 40 60 80 100 120 140 160 180 200 1 10 100 1000 4/11 Doc ID 8373 Rev 6

STTH8L06 Characteristics Figure 13. Thermal resistance junction to ambient versus copper surface under tab (D2PAK) Rth(j-a)(°C/W) 70 epoxy FR4,Cu= 35 µm 60 50 40 30 20 10 S(Cu)(cm²) 0 0 5 10 15 20 25 30 35 40 Doc ID 8373 Rev 6 5/11

Package information STTH8L06 2 Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.4 N·m to 0.6 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. TO-220AC dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 H2 A C 1.23 1.32 0.048 0.051 Ø I C D 2.40 2.72 0.094 0.107 L5 L7 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 L6 F1 1.14 1.70 0.044 0.066 L2 G 4.95 5.15 0.194 0.202 F1 L9 D H2 10.00 10.40 0.393 0.409 L2 16.40 typ. 0.645 typ. L4 F L4 13.00 14.00 0.511 0.551 M L5 2.65 2.95 0.104 0.116 E L6 15.25 15.75 0.600 0.620 G L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M 2.6 typ. 0.102 typ. Diam. I 3.75 3.85 0.147 0.151 6/11 Doc ID 8373 Rev 6

STTH8L06 Package information T able 7. TO-220FPAC dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.4 4.6 0.173 0.181 A B 2.5 2.7 0.098 0.106 H B D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 Dia F 0.75 1 0.030 0.039 L6 F1 1.15 1.70 0.045 0.067 L2 L7 G 4.95 5.20 0.195 0.205 L3 G1 2.4 2.7 0.094 0.106 L5 D H 10 10.4 0.393 0.409 F1 L4 L2 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 F E L4 9.8 10.6 0.386 0.417 G1 L5 2.9 3.6 0.114 0.142 G L6 15.9 16.4 0.626 0.646 L7 9.00 9.30 0.354 0.366 Dia. 3.00 3.20 0.118 0.126 Doc ID 8373 Rev 6 7/11

Package information STTH8L06 T able 8. TO-220AC (Nins. & Ins. 20-up) dimensions Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 15.20 15.90 0.598 0.625 a1 3.75 0.147 B C a2 13.00 14.00 0.511 0.551 Ø I b2 B 10.00 10.40 0.393 0.409 L F b1 0.61 0.88 0.024 0.034 A b2 1.23 1.32 0.048 0.051 I4 C 4.40 4.60 0.173 0.181 a1 c2 c1 0.49 0.70 0.019 0.027 l2 a2 c2 2.40 2.72 0.094 0.107 e 4.80 5.40 0.189 0.212 M b1 c1 F 6.20 6.60 0.244 0.259 e ØI 3.75 3.85 0.147 0.151 I4 15.80 16.40 16.80 0.622 0.646 0.661 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 M 2.60 0.102 8/11 Doc ID 8373 Rev 6

STTH8L06 Package information T able 9. D2PAK dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A A1 2.49 2.69 0.098 0.106 E L2 C2 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 D B2 1.14 1.70 0.045 0.067 L C 0.45 0.60 0.017 0.024 L3 A1 C2 1.23 1.36 0.048 0.054 B2 C R D 8.95 9.35 0.352 0.368 B E 10.00 10.40 0.393 0.409 G G 4.88 5.28 0.192 0.208 A2 L 15.00 15.85 0.590 0.624 M * L2 1.27 1.40 0.050 0.055 V2 L3 1.40 1.75 0.055 0.069 * FLAT ZONE NO LESS THAN 2mm M 2.40 3.20 0.094 0.126 R 0.40 typ. 0.016 typ. V2 0° 8° 0° 8° Figure 14. Footprint (dimensions in mm) 16.90 10.30 5.08 1.30 3.70 8.90 Doc ID 8373 Rev 6 9/11

Ordering information STTH8L06 3 Ordering information T able 10. Ordering information Order code Marking Package Weight Base qty Delivery mode STTH8L06D STTH8L06D TO-220AC 1.90 g 50 Tube STTH8L06G STTH8L06G D2PAK 1.48 g 50 Tube STTH8L066G-TR STTH8L06G D2PAK 1.48 g 1000 Tape and reel STTH8L06FP STTH8L06FP TO-220FPAC 1.70 g 50 Tube STTH8L06DIRG STTH8L06DI TO-220AC Ins. 1.86 g 50 Tube 4 Revision history T able 11. Document revision history Date Revision Changes Nov-2002 2A Last issue 18-Oct-2004 3 TO-220AC Insulated and D2PAK packages added 13-Jun-2005 4 T changed from value 175 to range -40 to 175 °C - Page1 j Reformatted to current standard. Added package insulation voltage 10-Aug-2006 5 data on page 1. Changed order code STTH8L06DI to STTH8L06DIRG. 07-Feb-2012 6 Added I to Table4. RM 10/11 Doc ID 8373 Rev 6

STTH8L06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 8373 Rev 6 11/11

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: STTH8L06D STTH8L06FP STTH8L06G STTH8L06G-TR STTH8L06DIRG