STTH60L06 Turbo 2 ultrafast high voltage rectifier Features and benefits ■ Ultrafast switching ■ Low reverse current ■ Low thermal resistance ■ Reduces switching and conduction losses A K Description DO-247 STTH60L06W The STTH60L06, which is using ST Turbo 2 600 V technology, is specially suited for use in switching power supplies, and industrial T able 1. Device summary applications, as rectification and discontinuous mode PFC boost diode. Thanks to its low VF Symbol Value characteristics, this device exhibits high performances in free-wheeling applications. IF(AV) 60 A V 600 V RRM T (max) 175 °C j V (typ) 0.95 V F t (max) 70 ns rr September 2011 Doc ID 10764 Rev 3 1/8 www.st.com 8

Characteristics STTH60L06 1 Characteristics T able 2. Absolute ratings (limiting values) Symbol Parameter Value Unit V Repetitive peak reverse voltage 600 V RRM I Forward rms current 90 A F(RMS) I Average forward current δ = 0.5 T = 110 °C 60 A F(AV) c I Surge non repetitive forward current t = 10 ms sinusoidal 600 A FSM p T Storage temperature range -65 to + 175 °C stg T Maximum operating junction temperature 175 °C j T able 3. Thermal parameter Symbol Parameter Value (max) Unit R Junction to case 0.75 °C/W th(j-c) T able 4. Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit I (1) Reverse leakage Tj = 25 °C V = V 50 µA R current T = 150 °C R RRM 160 1600 j T = 25 °C 1.55 V (2) Forward voltage drop j I = 60 A V F F T = 150 °C 0.95 1.2 j 1. Pulse test: t = 5 ms, δ < 2 % p 2. Pulse test: t = 380 µs, δ < 2 % p To evaluate the maximum conduction losses use the following equation: P = 0.93 x I + 0.0045 I 2 F(AV) F (RMS) 2/8 Doc ID 10764 Rev 3

STTH60L06 Characteristics T able 5. Dynamic electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit I = 0.5 A, F I = 0.25 A 70 rr Reverse IR =1 A t T = 25 °C ns rr recovery time j I = 1 A, F dI /dt = 50 A/µs 75 105 F V = 30 V R I = 60 A, Reverse F I T = 125 °C V = 400 V 14 19 A RM recovery current j R dI /dt = 100 A/µs F I = 60 A, Forward recovery F t T = 25 °C dI /dt = 200 A/µs 500 ns fr time j F V = 1.1 x V FR Fmax I = 60 A, Forward recovery F V T = 25 °C dI /dt = 200 A/µs 3 V FP voltage j F V = 1.1 x V FR Fmax Doc ID 10764 Rev 3 3/8

Characteristics STTH60L06 Figure 1. Conduction losses versus average Figure 2. Forward voltage drop versus forward current forward current P(W) IFM(A) 140 200 δ= 0.5 180 120 δ= 0.2 160 Tj=150°C δ= 0.1 (maximum values) 100 140 δ= 0.05 δ= 1 120 80 Tj=150°C 100 (typical values) 60 80 Tj=25°C (maximum values) 40 T 60 40 20 IF(AV)(A) δ=tp/T tp 20 VFM(V) 0 0 0 10 20 30 40 50 60 70 80 90 100 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Figure 3. Relative variation of thermal Figure 4. Peak reverse recovery current impedance junction to case versus versus dI /dt (typical values) F pulse duration Zth(j-c)/Rth(j-c) IRM(A) 1.0 55 VR=400V 0.9 50 Tj=125°C 0.8 45 IF=2 x IF(AV) 0.7 40 IF=IF(AV) 0.6 35 IF=0.5 x IF(AV) 30 0.5 25 0.4 20 0.3 15 0.2 10 Single pulse 0.1 tp(s) 5 dIF/dt(A/µs) 0.0 0 1.E-03 1.E-02 1.E-01 1.E+00 0 50 100 150 200 250 300 350 400 450 500 Figure 5. Reverse recovery time versus dI /dt Figure 6. Reverse recovery charges versus F (typical values) dI /dt (typical values) F trr(ns) Qrr(µC) 1000 4.5 900 VTjR==142050°CV 4.0 VTjR==142050°CV 800 IF=2 x IF(AV) 3.5 700 3.0 600 IF=2 x IF(AV) 2.5 IF=IF(AV) 500 IF=IF(AV) 400 IF=0.5 x IF(AV) 2.0 IF=0.5 x IF(AV) 1.5 300 200 1.0 100 0.5 dIF/dt(A/µs) dIF/dt(A/µs) 0 0.0 0 50 100 150 200 250 300 350 400 450 500 0 100 200 300 400 500 4/8 Doc ID 10764 Rev 3

STTH60L06 Characteristics Figure 7. Reverse recovery softness factor Figure 8. Relative variations of dynamic versus dI /dt (typical values) parameters versus junction F temperature S factor 1.4 1.6 1.4 ITVFjR<== 1242 0x50°IFCV(AV) 1.2 Sfactor 1.2 1.0 1.0 0.8 QRR 0.8 0.6 trr VIFR==I4F0(A0VV) 0.6 0.4 IRM Reference:Tj=125°C 0.4 0.2 0.2 Tj(°C) dIF/dt(A/µs) 0.0 0.0 25 50 75 100 125 0 50 100 150 200 250 300 350 400 450 500 Figure 9. Transient peak forward voltage Figure 10. Forward recovery time versus dI /dt F versus dI /dt (typical values) (typical values) F VFP(V) tfr(ns) 8 400 7 ITFj==I1F2(A5V°)C 350 VFR=T1IFj.=1=1 Ix2F(5VA°VFC)max. 6 300 5 250 4 200 3 150 2 100 1 50 dIF/dt(A/µs) dIF/dt(A/µs) 0 0 0 50 100 150 200 250 300 350 400 450 500 0 100 200 300 400 500 Figure 11. Junction capacitance versus reverse voltage applied (typical values) C(pF) 1000 F=1MHz VOSC=30mVRMS Tj=25°C 100 VR(V) 10 1 10 100 1000 Doc ID 10764 Rev 3 5/8

Package information STTH60L06 2 Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.55 to 1.0 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. T able 6. DO247 dimensions Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.85 5.15 0.191 0.203 V D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 V Dia F 1.00 1.40 0.039 0.055 F2 2.00 0.078 A H F3 2.00 2.40 0.078 0.094 G 10.90 0.429 L5 H 15.45 15.75 0.608 0.620 L L 19.85 20.15 0.781 0.793 L2 L4 L1 3.70 4.30 0.145 0.169 F2 L1 L2 18.50 0.728 L3 V2 F3 D L3 14.20 14.80 0.559 0.582 L4 34.60 1.362 F M E G L5 5.50 0.216 M 2.00 3.00 0.078 0.118 V 5° 5° V2 60° 60° Dia. 3.55 3.65 0.139 0.143 6/8 Doc ID 10764 Rev 3

STTH60L06 Ordering information 3 Ordering information T able 7. Ordering information Order code Marking Package Weight Base qty Delivery mode STTH60L06W STTH60L06W DO-247 4.40 g 30 Tube 4 Revision history T able 8. Document revision history Date Revision Changes 07-Sep-2004 1 First issue Junction to case value (Thermal parameter on page2) changed from 10-Sep-2004 2 0.70 °C/W to 0.75 °C/W 07-Sep-2011 3 Updated I from 400 A to 600 A. FSM Doc ID 10764 Rev 3 7/8

STTH60L06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 10764 Rev 3

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: STTH60L06W