STTH5R06 Turbo 2 ultrafast high voltage rectifier Datasheet - production data A K Description The device is developed using ST's Turbo 2 K 600 V technology. It is well-suited as a boost diode, especially for use in continuous mode power factor corrections and hard switching conditions. A This device is also intended for use as a free A K wheeling diode in power supplies and other TO-220AC K TO-220FPAC power switching applications. Table 1: Device summary K Symbol Value IF(AV) 5 A A VRRM 600 V D²PAK Tj (max.) 175 °C NC VF (typ.) 1.40 V K K trr (max.) 25 ns A A NC NC DPAK Features  Ultrafast switching  Low reverse recovery current  Reduces switching losses  Low thermal resistance  Insulated package: TO-220FPAC  Insulation voltage: 2000 V sine RMS  ECOPACK®2 compliant component for DPAK on demand October 2016 DocID7976 Rev 12 1/17 This is information on a product in full production. www.st.com

Characteristics STTH5R06 1 Characteristics Table 2: Absolute ratings (limiting values at 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V TO-220AC TO-220FPAC 20 IF(RMS) Forward rms current D²PAK A DPAK 10 TO-220AC Average forward current TC = 135 °C DPAK IF(AV) δ = 0.5, square wave D²PAK 5 A TC = 105 °C TO-220FPAC Surge non repetitive forward IFSM current tp = 10 ms sinusoidal 50 A Tstg Storage temperature range -65 to +175 °C Tj Maximum operating junction temperature 175 °C Table 3: Thermal parameter Symbol Parameter Max. value Unit TO-220AC / DPAK / D²PAK 3.0 Rth(j-c) Junction to case °C/W TO-220FPAC 5.5 Table 4: Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit Tj = 25 °C - 20 IR(1) Reverse leakage current VR = VRRM µA Tj = 125 °C - 25 250 Tj = 25 °C - 2.9 VF(2) Forward voltage drop IF = 5 A V Tj = 125 °C - 1.4 1.8 Notes: (1)Pulse test: tp = 5 ms, δ < 2% (2)Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses, use the following equation: P = 1.164 x I + 0.128 x I 2 F(AV) F (RMS) 2/17 DocID7976 Rev 12

STTH5R06 Characteristics Table 5: Dynamic electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit IF = 0.5 A Irr = 0.25 A - 25 IR = 1 A Reverse recovery trr time Tj = 25 °C IF = 1 A ns VR = 30 V - 40 dIF/dt = -50 A/µs Reverse recovery IRM current - 5.0 6.0 A IF = 5 A Sfactor Softness factor Tj = 125 °C VR = 400 V - 0.35 - Reverse recovery dIF/dt = -200 A/µs Qrr charges - 110 nC Forward recovery tfr time IF = 5 A - 150 ns Tj = 25 °C VFR = 1.1 x VF(max.) Forward recovery VFP voltage dIF/dt = 40 A/µs - 4.5 V DocID7976 Rev 12 3/17

Characteristics STTH5R06 1.1 Characteristics (curves) Figure 1: Conduction losses versus average Figure 2: Forward voltage drop versus forward current current P(W) 13 δ=0.05 δ=0.1 δ=0.2 δ=0.5 12 11 10 δ=1 9 8 7 6 5 4 3 T 2 1 IF(AV)(A) δ=tp/T tp 0 0 1 2 3 4 5 6 7 Figure 3: Relative variation of thermal impedance Figure 4: Relative variation of thermal impedance junction to case versus pulse duration junction to case versus pulse duration (TO-220AC, DPAK, D²PAK) (TO-220FPAC) Zth(j-c)/Rth(j-c) Zth(j-c)/Rth(j-c) 1.0 1.0 0.9 0.9 0.8 0.8 0.7 0.7 0.6 δ=0.5 0.6 δ=0.5 0.5 0.5 0.4 0.4 δ=0.2 0.3 δ=0.1 0.3 δ=0.2 0.2 T 0.2 δ=0.1 T 0.1 Singlepulse tp(s) 0.1 tp(s) 0.0 δ=tp/T tp 0.0 Singlepulse δ=tp/T tp 1.E-03 1.E-02 1.E-01 1.E+00 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 Figure 5: Peak reverse recovery current versus Figure 6: Reverse recovery time versus dIF/dt dIF/dt (typical values) (typical values) 22IRM(A) 80trr(ns) 20 VTjR==142050°CV IF=2xIF(AV) 70 TVjR==12450°0CV 18 16 60 IF=2xIF(AV) IF=IF(AV) 14 IF=0.5xIF(AV) 50 IF=IF(AV) 12 40 IF=0.5xIF(AV) 10 IF=0.25xIF(AV) 8 30 6 20 4 10 2 dIF/dt(A/µs) dIF/dt(A/µs) 0 0 0 200 400 600 800 1000 0 200 400 600 800 1000 4/17 DocID7976 Rev 12

STTH5R06 Characteristics Figure 7: Reverse recovery charges versus dIF/dt Figure 8: Softness factor versus dIF/dt (typical values) (typical values) Qrr(nC) Sfactor 350 0.70 300 VTjR==142050°CV IF=2xIF(AV) 0.60 TVIFjR===1IF42(05A0V°CV) 250 0.50 200 I =I(AV) F F 0.40 150 I =0.5xI (AV) 0.30 100 F F 0.20 50 dIF/dt(A/µs) dIF/dt(A/µs) 0 0.10 0 200 400 600 800 1000 0 200 400 600 800 1000 Figure 9: Relative variations of dynamic Figure 10: Transient peak forward voltage versus parameters versus junction temperature dIF/dt (typical values) VFP(V) 20 18 IF=IF(AV) Tj=125°C 16 14 12 10 8 6 4 2 dIF/dt(A/µs) 0 0 100 200 300 400 500 Figure 11: Forward recovery time versus dIF/dt Figure 12: Junction capacitance versus reverse (typical values) voltage applied (typical values) t (ns) C(pF) 120 fr 100 IF=IF(AV) F=1MHz 100 VFRT=j1=.112x5V°FCmax VosTcj==3205V°CFMS 80 60 40 20 dIF/dt(A/µs) VR(V) 0 10 0 100 200 300 400 500 1 10 100 1000 DocID7976 Rev 12 5/17

Characteristics STTH5R06 Figure 13: Thermal resistance junction to ambient Figure 14: Thermal resistance junction to ambient versus copper surface under tab (DPAK) versus copper surface under tab (D²PAK) 6/17 DocID7976 Rev 12

STTH5R06 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.  Cooling method: by conduction (C)  Epoxy meets UL 94,V0  Recommended torque value: 0.55 N·m (for TO-220FPAC / TO-220AC)  Maximum torque value: 0.7 N·m (for TO-220FPAC / TO-220AC) 2.1 TO-220AC package information Figure 15: TO-220AC package outline DocID7976 Rev 12 7/17

Package information STTH5R06 Table 6: TO-220AC package mechanical data Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 L2 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M 2.6 typ. 0.102 typ. Diam 3.75 3.85 0.147 0.151 8/17 DocID7976 Rev 12

STTH5R06 Package information 2.2 TO-220FPAC package information Figure 16: TO-220FPAC package outline A H B Dia L6 L2 L7 L3 L5 D F1 L4 F E G1 G DocID7976 Rev 12 9/17

Package information STTH5R06 Table 7: TO-220FPAC package mechanical data Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 B 2.50 2.70 0.098 0.106 D 2.50 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1.00 0.030 0.039 F1 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.40 2.70 0.094 0.106 H 10.00 10.40 0.393 0.409 L2 16.00 typ. 0.630 typ. L3 28.60 30.60 0.126 1.205 L4 9.80 10.60 0.386 0.417 L5 2.90 3.60 0.114 0.142 L6 15.90 16.40 0.626 0.646 L7 9.00 9.30 0.354 0.366 Dia. 3.00 3.20 0.118 0.126 10/17 DocID7976 Rev 12

STTH5R06 Package information 2.3 DPAK package information Figure 17: DPAK package outline This package drawing may slightly differ from the physical package. However, all the specified dimensions are guaranteed. DocID7976 Rev 12 11/17

Package information STTH5R06 Table 8: DPAK package mechanical data Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 2.18 2.40 0.085 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 b 0.64 0.90 0.025 0.035 b4 4.95 5.46 0.194 0.215 c 0.46 0.61 0.018 0.024 c2 0.46 0.60 0.018 0.023 D 5.97 6.22 0.235 0.244 D1 4.95 5.60 0.194 0.220 E 6.35 6.73 0.250 0.265 E1 4.32 5.50 0.170 0.216 e 2.286 typ. 0.090 typ. e1 4.40 4.70 0.173 0.185 H 9.35 10.40 0.368 0.409 L 1.0 1.78 0.039 0.070 L2 1.27 0.050 L4 0.60 1.02 0.023 0.040 V2 -8° +8° -8° +8° Figure 18: DPAK recommended footprint (dimensions in mm) 12/17 DocID7976 Rev 12

STTH5R06 Package information 2.4 D²PAK package information Figure 19: D²PAK package outline DocID7976 Rev 12 13/17

Package information STTH5R06 Table 9: D²PAK package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.40 4.60 0.173 0.181 A1 0.03 0.23 0.001 0.009 b 0.70 0.93 0.028 0.037 b2 1.14 1.70 0.045 0.067 c 0.45 0.60 0.018 0.024 c2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 7.50 7.75 8.00 0.295 0.305 0.315 D2 1.10 1.30 1.50 0.043 0.051 0.060 E 10 10.40 0.394 0.409 E1 8.50 8.70 8.90 0.335 0.343 0.346 E2 6.85 7.05 7.25 0.266 0.278 0.282 e 2.54 0.100 e1 4.88 5.28 0.190 0.205 H 15 15.85 0.591 0.624 J1 2.49 2.69 0.097 0.106 L 2.29 2.79 0.090 0.110 L1 1.27 1.40 0.049 0.055 L2 1.30 1.75 0.050 0.069 R 0.4 0.015 V2 0° 8° 0° 8° 14/17 DocID7976 Rev 12

STTH5R06 Package information Figure 20: D²PAK recommended footprint (dimensions are in mm) DocID7976 Rev 12 15/17

Ordering information STTH5R06 3 Ordering information Table 10: Ordering information Order code Marking Package Weight Base qty. Delivery mode STTH5R06D STTH5R06D TO-220AC 1.90 g 50 Tube STTH5R06G-TR STTH5R06G D²PAK 1.48 g 1000 Tape and reel STTH5R06FP STTH5R06FP TO-220FPAC 1.90 g 50 Tube STTH5R06B STTH5 R06B DPAK 0.30 g 75 Tube STTH5R06B-TR STTH5 R06B DPAK 0.30 g 2500 Tape and reel 4 Revision history Table 11: Document revision history Date Revision Changes 17-Feb-2011 9 Last issue. Added insulated package text in Features. Corrected typographical errors in Table 10. Updated TO-220FPAC, 01-Aug-2014 10 D2PAK and DPAK package information and reformatted to current standard. 18-Sep-2014 11 Updated Figure 18, Figure 19 and Table 4. Updated DPAK package information and reformatted to 19-Oct-2016 12 current standard. 16/17 DocID7976 Rev 12

STTH5R06 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved DocID7976 Rev 12 17/17

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: STTH5R06B STTH5R06D STTH5R06FP STTH5R06G-TR STTH5R06B-TR STTH5R06G