STB19NF20, STD19NF20 STF19NF20, STP19NF20 Datasheet N-channel 200 V, 0.11 Ω, 15 A, MESH OVERLAY™ Power MOSFETs in D2PAK, DPAK, TO 220FP and TO-220 packages ‑ Features TAB TAB 23 Type VDS RDS(on) max. ID Package D 2 PA1K3 DPAK 1 STB19NF20 D2PAK TAB STD19NF20 DPAK 200 V 0.16 Ω 15 A STF19NF20 TO-220FP 3 23 12 STP19NF20 TO-220 TO-220FP1 TO-220 • Extremely high dv/dt capability • Gate charge minimized D(2, TAB) • Very low intrinsic capacitance Applications G(1) • Switching applications Description S(3) AM01475v1_noZen These Power MOSFETs are designed using STMicroelectronics' consolidated strip- layout-based MESH OVERLAY™ process. The result is a product that matches or improves on the performance of comparable standard parts from other manufacturers. Product status links STB19NF20 STD19NF20 STF19NF20 STP19NF20 DS4935 - Rev 7 - August 2018 www.st.com For further information contact your local STMicroelectronics sales office.

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter Unit D²PAK, DPAK, TO-220FP TO-220 VDS Drain-source voltage 200 VGS Gate-source voltage ±20 V Drain current (continuous) at TC = 25 °C 15 15(1) ID A Drain current (continuous) at TC = 100 °C 9.45 9.45(1) IDM(2) Drain current (pulsed) 60 60(1) A PTOT Total dissipation at Tcase = 25 °C 90 25 W Insulation withstand voltage (RMS) from all three leads to VISO external heat sink (t = 1 s, TC = 25 °C) 2.5 kV dv/dt(3) Peak diode recovery voltage slope 15 V/ns Tstg Storage temperature range -55 to 150 °C Tj Operating junction temperature range 1. This value is limited by package. 2. Pulse width is limited by safe operating area. 3. ISD ≤ 15 A, di/dt ≤ 300 A/μs, VDD = 80 % V(BR)DSS Table 2. Thermal data Value Symbol Parameter Unit D²PAK DPAK TO-220 TO-220FP Rthj-case Thermal resistance junction-case 1.39 5 Rthj-pcb(1) Thermal resistance junction-pcb 35 50 °C/W Rthj-amb Thermal resistance junction-ambient 62.5 1. When mounted on an 1-inch² FR-4, 2oz Cu board Table 3. Avalanche characteristics Symbol Parameter Value Unit IAR Avalanche current, repetitive or not repetitive (pulse width limited by Tjmax) 15 A EAS Single-pulse avalanche energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) 110 mJ DS4935 - Rev 7 page 2/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Electrical characteristics 2 Electrical characteristics (T = 25 °C unless otherwise specified) case Table 4. Static Symbol Parameter Test conditions Min. Typ. Max. Unit V(BR)DSS Drain-source breakdown voltage VGS = 0 V, ID = 1 mA 200 V VGS = 0 V, VDS = 200 V 1 IDSS Zero gate voltage drain current VGS = 0 V, VDS = 200 V, µA 10 TC = 125 °C(1) IGSS Gate-body leakage current VDS = 0 V, VGS = ±20 V ±100 nA VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA 2 3 4 V RDS(on) Static drain-source on-resistance VGS = 10 V, ID = 7.5 A 0.11 0.16 Ω 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Parameter Test conditions Min. Typ. Max. Unit Ciss Input capacitance - 800 - Coss Output capacitance VDS = 25 V, f = 1 MHz, VGS = 0 V - 165 - pF Crss Reverse transfer capacitance - 26 - Qg Total gate charge VDD = 160 V, ID = 15 A, - 24 - Qgs Gate-source charge VGS = 0 to 10 V - 4.4 - nC (see Figure 16. Test circuit for gate Qgd Gate-drain charge charge behavior) - 11.6 - Table 6. Switching times Symbol Parameter Test conditions Min. Typ. Max. Unit td(on) Turn-on delay time VDD = 100 V, ID = 7.5 A, - 11.5 - tr Rise time RG = 4.7 Ω, VGS = 10 V - 22 - td(off) Turn-off delay time (see Figure 15. Test circuit for - 19 - ns resistive load switching times and Figure 20. Switching time tf Fall time waveform) - 11 - Table 7. Source-drain diode Symbol Parameter Test conditions Min. Typ. Max. Unit ISD Source-drain current - 15 A ISDM(1) Source-drain current (pulsed) - 60 A VSD(2) Forward on voltage ISD = 15 A, VGS = 0 V - 1.6 V DS4935 - Rev 7 page 3/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit trr Reverse recovery time ISD = 15 A, di/dt = 100 A/µs, - 125 ns Qrr Reverse recovery charge VDD = 50 V - 0.55 µC (see Figure 17. Test circuit for IRRM Reverse recovery current inductive load switching and diode - 8.8 A recovery times) trr Reverse recovery time ISD = 15 A, di/dt = 100 A/µs, - 148 ns Qrr Reverse recovery charge VDD = 50 V, Tj = 150 °C - 0.73 µC (see Figure 17. Test circuit for IRRM Reverse recovery current inductive load switching and diode - 9.9 A recovery times) 1. Pulse width is limited by safe operating area. 2. Pulse test: pulse duration = 300 µs, duty cycle 1.5%. DS4935 - Rev 7 page 4/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Electrical characteristics (curves) 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for D²PAK, DPAK and Figure 2. Thermal impedance for D²PAK, DPAK and TO-220 TO-220 Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP K GC20940 10 -1 10 -2 10 -3 10 -4 10 -3 10 -2 10 -1 10 0 t p (s) Figure 5. Output characteristics Figure 6. Transfer characteristics V = 8,9,10 V GS 7 V 6 V 5 V 4 V DS4935 - Rev 7 page 5/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Electrical characteristics (curves) Figure 7. Static drain-source on-resistance Figure 8. Normalized V(BR)DSS vs temperature V (BR)DSS (norm.) Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs Figure 12. Normalized on-resistance vs temperature temperature DS4935 - Rev 7 page 6/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Electrical characteristics (curves) Figure 13. Source-drain diode forward characteristics Figure 14. Maximum avalanche energy vs temperature DS4935 - Rev 7 page 7/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Test circuits 3 Test circuits Figure 15. Test circuit for resistive load switching times Figure 16. Test circuit for gate charge behavior VDD 12 V 47 kΩ 1 kΩ 100 nF RL 2200 3.3 + μF μF VDD VD VGS IG= CONST 100 Ω D.U.T. VGS RG D.U.T. pulse width 2200+ 2.7 kΩ VG pulse width μF 47 kΩ 1 kΩ AM01468v1 AM01469v1 Figure 17. Test circuit for inductive load switching and Figure 18. Unclamped inductive load test circuit diode recovery times A A A L G DD.U.T. fdaiostde 100 µH VD 2200 3.3 25 Ω S B B B D µ3F.3 +1µ0F00 VDD ID +µF µF VDD G D.U.T. + RG S Vi D.U.T. _ pulse width AM01471v1 AM01470v1 Figure 20. Switching time waveform Figure 19. Unclamped inductive waveform ton toff V(BR)DSS td(on) tr td(off) tf VD 90% 90% IDM ID 0 10% VDS 10% VDD VDD VGS 90% 0 10% AM01472v1 AM01473v1 DS4935 - Rev 7 page 8/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Ordering information 4 Ordering information Table 8. Order codes Order code Marking Package Packing STB19NF20 D2PAK Tape and reel STD19NF20 DPAK 19NF20 STF19NF20 TO-220FP Tube STP19NF20 TO-220 DS4935 - Rev 7 page 9/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Package information 5 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS4935 - Rev 7 page 10/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 D²PAK (TO-263) type A package information 5.1 D²PAK (TO-263) type A package information Figure 21. D²PAK (TO-263) type A package outline 0079457_25 DS4935 - Rev 7 page 11/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 D²PAK (TO-263) type A package information Table 9. D²PAK (TO-263) type A package mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 7.75 8.00 D2 1.10 1.30 1.50 E 10.00 10.40 E1 8.30 8.50 8.70 E2 6.85 7.05 7.25 e 2.54 e1 4.88 5.28 H 15.00 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R 0.40 V2 0° 8° DS4935 - Rev 7 page 12/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 D²PAK (TO-263) type B package information 5.2 D²PAK (TO-263) type B package information Figure 22. D²PAK (TO-263) type B package outline 0079457_25_B DS4935 - Rev 7 page 13/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 D²PAK (TO-263) type B package information Table 10. D²PAK (TO-263) type B mechanical data mm Dim. Min. Typ. Max. A 4.36 4.56 A1 0 0.25 b 0.70 0.90 b1 0.51 0.89 b2 1.17 1.37 b3 1.36 1.46 c 0.38 0.694 c1 0.38 0.534 c2 1.19 1.34 D 8.60 9.00 D1 6.90 7.50 E 10.15 10.55 E1 8.10 8.70 e 2.54 BSC H 15.00 15.60 L 1.90 2.50 L1 1.65 L2 1.78 L3 0.25 L4 4.78 5.28 DS4935 - Rev 7 page 14/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 D²PAK (TO-263) type B package information Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm) Footprint DS4935 - Rev 7 page 15/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 DPAK (TO-252) type A2 package information 5.3 DPAK (TO-252) type A2 package information Figure 24. DPAK (TO-252) type A2 package outline 0068772_type-A2_rev25 DS4935 - Rev 7 page 16/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 DPAK (TO-252) type A2 package information Table 11. DPAK (TO-252) type A2 mechanical data mm Dim. Min. Typ. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 5.10 5.25 E 6.40 6.60 E1 5.10 5.20 5.30 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 L1 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 1.00 R 0.20 V2 0° 8° DS4935 - Rev 7 page 17/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 DPAK (TO-252) type C2 package information 5.4 DPAK (TO-252) type C2 package information Figure 25. DPAK (TO-252) type C2 package outline 0068772_C2_25 DS4935 - Rev 7 page 18/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 DPAK (TO-252) type C2 package information Table 12. DPAK (TO-252) type C2 mechanical data mm Dim. Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 5.33 5.46 c 0.47 0.60 c2 0.47 0.60 D 6.00 6.10 6.20 D1 5.10 5.60 E 6.50 6.60 6.70 E1 5.20 5.50 e 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 2.90 REF L2 0.90 1.25 L3 0.51 BSC L4 0.60 0.80 1.00 L6 1.80 BSC θ1 5° 7° 9° θ2 5° 7° 9° V2 0° 8° DS4935 - Rev 7 page 19/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 DPAK (TO-252) type C2 package information Figure 26. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_25 DS4935 - Rev 7 page 20/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 D²PAK and DPAK packing information 5.5 D²PAK and DPAK packing information Figure 27. Tape outline DS4935 - Rev 7 page 21/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 D²PAK and DPAK packing information Figure 28. Reel outline T 40mm min. access hole at slot location B D C N A Tape slot G measured in core for at hub Full radius tape start 2.5mm min.width AM06038v1 Table 13. D²PAK tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. Min. Max. A0 10.5 10.7 A 330 B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 13.2 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 26.4 F 11.4 11.6 N 100 K0 4.8 5.0 T 30.4 P0 3.9 4.1 P1 11.9 12.1 Base quantity 1000 P2 1.9 2.1 Bulk quantity 1000 R 50 T 0.25 0.35 W 23.7 24.3 DS4935 - Rev 7 page 22/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 D²PAK and DPAK packing information Table 14. DPAK tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. Min. Max. A0 6.8 7 A 330 B0 10.4 10.6 B 1.5 B1 12.1 C 12.8 13.2 D 1.5 1.6 D 20.2 D1 1.5 G 16.4 18.4 E 1.65 1.85 N 50 F 7.4 7.6 T 22.4 K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 DS4935 - Rev 7 page 23/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 TO-220FP package information 5.6 TO-220FP package information Figure 29. TO-220FP package outline 7012510_Rev_12_B DS4935 - Rev 7 page 24/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 TO-220FP package information Table 15. TO-220FP package mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DS4935 - Rev 7 page 25/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 TO-220 type A package information 5.7 TO-220 type A package information Figure 30. TO-220 type A package outline 0015988_typeA_Rev_21 DS4935 - Rev 7 page 26/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 TO-220 type A package information Table 16. TO-220 type A package mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 DS4935 - Rev 7 page 27/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Revision history Table 17. Document revision history Date Version Changes 13-Oct-2006 1 First release. 17-Nov-2006 2 Part number has been modified. 02-Feb-2007 3 Preliminary version. 16-Feb-2007 4 TO-220FP package has been added. Updated Section 4: Package information and Section 4: Package information. 15-Oct-2012 5 Minor text changes. Throughout document: – added DPAK package information – text and formatting updates 16-Apr-2015 6 Updated Figure 1: Internal schematic diagram Updated Table 2: Absolute maximum ratings Updated Table 3: Thermal data Updated and renamed Table 5: Static (was On/off states) Removed maturity status indication from cover page. The document status is production data. 09-Aug-2018 7 Updated Table 5. Dynamic. Updated Section 5 Package information. Minor text changes DS4935 - Rev 7 page 28/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 Contents Contents 1 Electrical ratings ..................................................................2 2 Electrical characteristics...........................................................3 2.1 Electrical characteristics (curves) .................................................5 3 Test circuits .......................................................................8 4 Ordering information ..............................................................9 5 Package information..............................................................10 5.1 D²PAK (TO-263) type A package information ......................................10 5.2 D²PAK (TO-263) type B package information ......................................12 5.3 DPAK (TO-252) type A2 package information......................................15 5.4 DPAK (TO-252) type C2 package information......................................17 5.5 D²PAK and DPAK packing information............................................20 5.6 TO-220FP package information .................................................23 5.7 TO-220 type A package information..............................................25 Revision history .......................................................................28 DS4935 - Rev 7 page 29/30

STB19NF20,STD19NF20,STF19NF20,STP19NF20 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS4935 - Rev 7 page 30/30