ICGOO在线商城 > 分立半导体产品 > 晶体管 - 双极 (BJT) - 单 > STD878T4
数量阶梯 | 香港交货 | 国内含税 |
+xxxx | $xxxx | ¥xxxx |
查看当月历史价格
查看今年历史价格
STD878T4产品简介:
ICGOO电子元器件商城为您提供STD878T4由STMicroelectronics设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 STD878T4价格参考。STMicroelectronicsSTD878T4封装/规格:晶体管 - 双极 (BJT) - 单, 双极 (BJT) 晶体管 NPN 30V 5A 15W 表面贴装 DPAK。您可以下载STD878T4参考资料、Datasheet数据手册功能说明书,资料中有STD878T4 详细功能的应用电路图电压和使用方法及教程。
参数 | 数值 |
产品目录 | |
描述 | TRANS BIPO NPN 30V 5A DPAK两极晶体管 - BJT PWR BIP/S.SIGNAL |
产品分类 | 晶体管(BJT) - 单路分离式半导体 |
品牌 | STMicroelectronics |
产品手册 | |
产品图片 | |
rohs | 符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求 |
产品系列 | 晶体管,两极晶体管 - BJT,STMicroelectronics STD878T4- |
数据手册 | |
产品型号 | STD878T4 |
不同 Ib、Ic时的 Vce饱和值(最大值) | 1.2V @ 500mA,10A |
不同 Ic、Vce 时的DC电流增益(hFE)(最小值) | 100 @ 500mA,1V |
产品目录页面 | |
产品种类 | Power Bipolar Transistors |
供应商器件封装 | D-Pak |
其它名称 | 497-10034-2 |
功率-最大值 | 15W |
包装 | 带卷 (TR) |
发射极-基极电压VEBO | 6 V |
商标 | STMicroelectronics |
安装类型 | 表面贴装 |
安装风格 | SMD/SMT |
封装 | Reel |
封装/外壳 | TO-252-3,DPak(2 引线+接片),SC-63 |
封装/箱体 | DPAK |
工厂包装数量 | 2500 |
晶体管极性 | NPN |
晶体管类型 | NPN |
最大功率耗散 | 15000 mW |
最大工作温度 | + 150 C |
最大直流电集电极电流 | 5 A |
最小工作温度 | - 65 C |
标准包装 | 2,500 |
电压-集射极击穿(最大值) | 30V |
电流-集电极(Ic)(最大值) | 5A |
电流-集电极截止(最大值) | - |
直流电流增益hFE最大值 | 120 |
直流集电极/BaseGainhfeMin | 120 at 10 mA at 1 V, 100 at 500 mA at 1 V, 70 at 5 A at 1 V |
系列 | STD878 |
配置 | Single |
集电极—发射极最大电压VCEO | 30 V |
集电极—基极电压VCBO | 45 V |
频率-跃迁 | - |
STD878 STN878 High current, high performance, low voltage NPN transistors Features ■ Very low collector to emitter saturation voltage ■ DC current gain, hFE >100 4 4 ) s ■ 5 A continuous collector current ( 3 t c 3 2 Applications 1 u 1 d o ■ Power management in portable equipment r P ■ Voltage regulation in bias supply circuits SOT-223 DPAK e ■ Switching regulator in battery charger t e applications l o ■ Heavy load driver s Fbigure 1. Internal schematic diagram O Description - The devices are manufactured in low voltage) NPN s planar technology with “base island” (layout. the t resulting transistor shows exceptiocnal high gain performance coupled with veryu low saturation d voltage. o r P e t e l o s b O Table 1. Device summary Order codes Markings Packages Packaging STD878T4 D878 DPAK Tape and reel STN878 N878 SOT-223 Tape and reel August 2010 Doc ID 13836 Rev 2 1/10 www.st.com 10
Electrical ratings STD878, STN878 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit V Collector-base voltage (I = 0) 45 V CBO E V Collector-emitter voltage (I = 0) 30 V CEO B V Emitter-base voltage (I = 0) 6 V EBO C I Collector current 5 A C ) s I Collector peak current (t < 5 ms) 10 A CM P ( t Total dissipation at T = 25 °C for STD878 15 c P C u W TOT Total dissipation at T = 25 °C for STN878 d1.6 amb o T Storage temperature r -65 to 150 °C STG P T Max. operating junction temperature 150 °C J e t e l o Table 3. Thermal data s b Symbol ParametOer Value Unit R Thermal resistance junctio-n-case for STD878 __max 8.3 °C/W thJC ) R Thermal resistance jsunction-ambient for STN878 (1) _max 78 °C/W thJA ( t 1. Device mounted on PCBc area of 1 cm2. u d o r P e t e l o s b O 2/10 Doc ID 13836 Rev 2
STD878, STN878 Electrical characteristics 2 Electrical characteristics T = 25 °C unless otherwise specified. case T able 4. Electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit I Collector cut-off current VCB = 30 V 10 µA CBO (IE = 0) VCB = 30 V; TC = 100 °C 100 µA Emitter cut-off current I V = 6 V 10 µA EBO (I = 0) EB ) C s Collector-emitter ( t V (1) breakdown voltage I = 10 mA 30 c V (BR)CEO C u (IB = 0) d o Collector-base r V breakdown voltage I = 100 µA P 45 V (BR)CBO C (IE = 0) e t Emitter-base breakdown e V I = 100 µA 6 V (BR)EBO voltage (IC = 0) E ol s I = 0.5 A I = 5 mA 0.15 V C b B I O= 2 A I = 50 mA 0.35 V C B V (1) Collector-emitter - IC = 5 A IB = 0.25 A 0.7 V CE(sat) saturation voltage ) IC = 6 A IB = 0.25 A 0.7 V s I = 8 A I = 0.4 A 1 V ( C B t c IC = 10 A IB = 0.5 A 1.2 V u V (1) Basde-emitter saturation IC = 2 A IB = 50 mA 1.1 V BE(sat) vooltage I = 6 A I = 0.25 A 1.2 V C B r P I = 10 mA V = 1 V 120 200 C CE e IC = 500 mA VCE = 1 V 100 200 300 e t IC = 5 A VCE = 1 V 70 100 ol hFE (1) DC current gain IC = 5 A VCE = 1 V s T = 100 °C 100 c b I = 8 A V = 1 V 55 O C CE I = 10 A V = 1 V 35 C CE Resistive load t Delay time I = 3 A V = 20 V 180 220 ns d C CC t Rise time I =- I =60 mA 160 210 ns r B1 B2 t Storage time see Figure8 250 300 ns s t Fall time 80 100 ns f 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % Doc ID 13836 Rev 2 3/10
Electrical characteristics STD878, STN878 2.1 Electrical characteristics (curves) Figure 2. DC current gain (V = 1 V) Figure 3. DC current gain (V = 3 V) CE CE ) s ( t c u d o Figure 4. Collector-emitter saturation Figure 5. Base-remitter saturation P voltage voltage e t e l o s b O - ) s ( t c u d o r P Figure 6. Resistive load switching time Figure 7. Resistive load switching time e (ON) (OFF) t e l o s b O 4/10 Doc ID 13836 Rev 2
STD878, STN878 Electrical characteristics 2.2 Test circuits Figure 8. Resistive load switching test circuit ) s ( t c u d o r P e t e l 1. Fast electronic switch o 2. Non-inductive resistor s b O - ) s ( t c u d o r P e t e l o s b O Doc ID 13836 Rev 2 5/10
Package mechanical data STD878, STN878 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. ) s ( t c u d o r P e t e l o s b O - ) s ( t c u d o r P e t e l o s b O 6/10 Doc ID 13836 Rev 2
STD878, STN878 Package mechanical data SOT-223 mechanical data mm. Dim. Min. Typ. Max. A 1.80 A1 0.02 0.1 B 0.60 0.70 0.85 ) s ( B1 2.90 3.00 3.1t5 c u c 0.24 0.26 0.35 d o D 6.30 6.50 6.70 r P e 2.30 e e1 4.60 t e E 3.30 ol3.50 3.70 s H 6.70 b 7.00 7.30 O V 10o - ) s ( t c u d o r P e t e l o s b O 0046067_M Doc ID 13836 Rev 2 7/10
Package mechanical data STD878, STN878 TO-252 (DPAK) mechanical data mm. DIM. min. typ max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 ) b4 5.20 5.40 s c 0.45 0.60 ( t c2 0.48 0c.60 u D 6.00 6.20 d D1 5.10 o E 6.40 r 6.60 P E1 4.70 e 2.28 e t e1 4.40 e 4.60 H 9.35 ol 10.10 L 1 s b L1 2.80 O L2 0.80 L4 0.60 - 1 R ) 0.20 s V2 0( o 8 o t c u d o r P e t e l o s b O 0068772_G 8/10 Doc ID 13836 Rev 2
STD878, STN878 Revision history 4 Revision history T able 5. Document revision history Date Revision Changes 21-Aug-2007 1 Initial release. 30-Aug-2010 2 Inserted STD878T4 order code Table1 on page1. ) s ( t c u d o r P e t e l o s b O - ) s ( t c u d o r P e t e l o s b O Doc ID 13836 Rev 2 9/10
STD878, STN878 ) s Please Read Carefully: ( t c u Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subdsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and soervices described herein at any time, without notice. r P All ST products are sold pursuant to ST’s terms and conditions of sale. e Purchasers are solely responsible for the choice, selection and use of the ST products andt services described herein, and ST assumes no e liability whatsoever relating to the choice, selection or use of the ST products and services described herein. l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this s document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products b or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such O third party products or services or any intellectual property contained therein. - ) UNLESS OTHERWISE SET FORTH IN ST’S TERMSs AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AN(D/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED t WARRANTIES OF MERCHANTABILITY, FITNcESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMuENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. d UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT o RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING r APPLICATIONS, NOR IN PPRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE P ROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLYe BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void s any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any b liability of ST. O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 13836 Rev 2