REVISION DB NOTES: SSM-1XX-XXX-XX-XX-XX-X-XX-XX 1. C REPRESENTS A CRITICAL DIMENSION. OPTION SCTDHAIOLSE PN FRORINOTTM 2 3 . . M- C D O IH N P:I M-L-03AU26N M TTAHH PRRRUIUUTSY -H- 22TO7O8 UPP BTOO EFS:SO:: .R.00C006E8[:[ 00.5..12050 L]]BS. N-(0SoE2 E OT HNFR OPUOT E-S3 8I6T)IONS - - TF RR ((2::2 9TF9 AU PPPLOOLE S RSAITIETINOEIODLN N QRSS ET MYME.LA A(TXSAXE)P) E((E SSF EE&IGEE R NN8EOO,E SLTTH EET 11 456))) -SV, -SH: -02 THRU 36 POS: .006 (FULL STRIP STOCK: .008). 4. PACKAGE IN TUBES PER SHT 4, TABLE 2. ALL OTHER POSITIONS BULK PACKAGE. PLATING SPECIFICATION OPTION 5. MAXIMUM CUT FLASH: .015[0.38]. -S: 30µ" SELECTIVE GOLD IN CONTACT -P: PICK AND PLACE PAD 6. NOTCH OF PPP-12 TO BE ORIENTED TOWARD SAME END AS POSITION 1. - L : 1A0RµE"A S,E MLEACTTTIEV ET ING OOLND T IANI LC.ONTACT U(OSEN PLYP PA-1V2A, ISLAEEB LFEIG O 6N, S-HSVT ,3 ) 7. ROWS TO BE WITHIN .004[0.10] OF ONE ANOTHER. AREA, MATTE TIN ON TAIL. (SEE NOTE 12) 8. -36 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY. -T: MATTE TIN ON CONTACT AND TAIL. -K: POLYIMIDE FILM PAD 9. ENDWALL AFTER CUTTING: .033[0.84]±.005[0.13] -F: 3µ" SELECTIVE GOLD IN CONTACT (SEE FIG 5, SHT 2) 10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION AREA, MATTE TIN ON TAIL. (USE K-DOT-.138-.250-.005) IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS -STL: 30µ" SELECTIVE GOLD IN CONTACT (NOT AVAILABLE ON -SH AND -DH) MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. AREA, TIN/LEAD (90/10) ON TAIL. 11. FOR -SV TAIL STYLE: EVEN CUTS LOSE 2 POSITIONS PER CUT; ODD CUTS -H: 30µ" SELECTIVE GOLD IN CONTACT POLARIZATION OPTION LOSE 1 POSITION PER CUT. AREA, 3µ" SELECTIVE GOLD ON TAIL. -XX: POSITION TO BE POLARIZED 12. IF POLARIZATION OCCURS AT CENTER POSITION(S) OF BODY, MOVE PICK & -LM: 10µ" SELECTIVE GOLD IN CONTACT (USE PK-06-N, SEE FIG 7, SHT 3 PLACE PAD LEFT OR RIGHT TO NEXT AVAILABLE POSITION. AREA, MATTE TIN ON TAIL. FOR POLARIZATION POSITIONS) 13. THIS DIMENSION IS TO BE MEASURED RELATIVE TO DATUM -Z-. -TM: MATTE TIN ON CONTACT AND TAIL. (NOT AVAILABLE FOR -BE OPTION) 14. CHAMFERED END WALL MAY OR MAY NOT BE ON CUT TO POSITION PARTS. -FM: 3µ" SELECTIVE GOLD IN CONTACT 15. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE PACKAGED MOUNTING OPTION ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) TAIL SPECIFICATION -LC: LOCKING CLIP FOUND ON WWW.SAMTEC.COM. -SV: SINGLE VERTICAL (SEE FIG 1) (USE LC-05-TM, SEE NOTE 10) 16. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL, (USE SSM-XX-S) (FOR -SH AND -DH USE MOLDED TO BASED ON OPTIONS SELECTED. -SH: SINGLE HORIZONTAL (SEE FIG 3, SHT 2) POSITION BODIES) (USE SSM-XX-SH) OPTION (NO OF POS x .100[2.54]) -.100[2.54] C -DH: DOUBLE HORIZONTAL (SEE FIG 4, SHT 3) -BE: BOTTOM ENTRY (NO OF POS x .100[2.54]) (USE BCH-XX-D) (ONLY AVAILABLE ON -SV) ±.010[0.25] (CUT TOLERANCE, SEE NOTE 11) (USE SSM-XX-S-BE) ±.005[0.13] (MOLDED BODY TOLERANCE) (SEE FIG 2, SHT 2) .050 1.27 02 REF 36 .100 2.54 REF 01 35 SSM-XX-S 2 MAX SWAY C CONTACT #1 .18 4.6 REF (EITHER DIRECTION) -Z- FLUSH TO .005[0.13] MAX C "A" SEE NOTE 9 .295+.002 7.49+0.051 1° C -.005 -0.127 (SEE NOTE 13) (MEASURE AT BEND) .290 7.37 REF SEE NOTE 3 C 'D' 4° "A" .050 1.27 (SEE NOTE 13) C DETAIL 'D' LC-05-TM 2 MAX SWAY .047 1.19 SCALE 8 : 1 (NO OF POS x .100[2.54]) -.200[5.08] (EITHER DIRECTION) SECTION "A"-"A" -SV IN-PROCESS SCALE 3 : 1 FIG 1 -SV: SINGLE VERTICAL ROW (SSM-1XX-XXX-SV-LC SHOWN) UDNIMLEESNSS I OONTHSE ARRWEI SINE ISNPCEHCEIFSI.ED, TH*IS DOCUMENTP CROONTPARINIES TCAONRFYID ENNOTIATLE AND * PROPRIETARY INFORMATION AND ALL DESIGN, TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS DECIMALS ANGLES AINNCD. TSHAILSE DS ORCIGUHMTSE NATR ES HEAXLPLR NESOSTL YB ER EDSIESRCVLOEDSE BDY, ISNA MWTHEOCL, E .XX: .01 [0.3] 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .XXX: .005 [0.13] REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 .XXXX: .0020 [0.051] OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATOR: LCP, UL 94 VO, COLOR: BLACK .100[2.54] C.L. SURFACE MOUNT SOCKET STRIP CONTACT: PHOS BRONZE DWG. NO. SSM-1XX-XXX-XX-XX-XX-X-XX-XX BY: KOLB 09/11/1998 SHEET 1 OF 4 F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW

REVISION DB "R" .300 7.62 SSM-XX-S-BE "S" ±.020[0.51] 01 FIG 5 FIG 2 .138 3.50 REF .019±.020 0.48±0.51 -K: KAPTON PAD -SV-BE: SINGLE VERTICAL ROW BOTTOM ENTRY (SSM-110-XXX-SV-K SHOWN) (SSM-1XX-XXX-SV-BE SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) "R" = SEE FIG 1, SHEET 1 FOR OAL "S" = "R"/2 - .0689[1.750] .069 1.75 C CONTACT #1 .058 1.47 .433+.010 11.00+0.254 -.020 -0.508 3° C -SH IN-PROCESS (SEE NOTE 13) C .053 1.35 REF 2 MAX SWAY .020 0.51 (EITHER DIRECTION) REF -Z- SEE NOTE 3 C .015 0.38 .320 8.13 REF MEASURE AT BEND 3° (SEE NOTE 13) 2 MAX SWAY (EITHER DIRECTION) .055 1.40 SSM-XX-SH SECTION "B"-"B" "B" .125 3.18 .070 1.78 REF 01 36 "B" LC-05-TM FIG 3 TH*IS DOCUMENTP CROONTPARINIES TCAONRFYID ENNOTIATLE AND * -SH: SINGLE HORIZONTAL PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS (SSM-136-XXX-SH-LC SHOWN) AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) IONRC .P TAHRITS, DTOO CAUNMY EUNNTA SUHTAHLOL RNIZOETD B PEE DRISSOCNLO OSRED E,N INTI TWY HNOOLRE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .100[2.54] C.L. SURFACE MOUNT SOCKET STRIP DWG. NO. SHEET SCALE: 2:1 SSM-1XX-XXX-XX-XX-XX-X-XX-XX F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW BY: KOLB 09/11/1998 SHEET 2 OF 4

REVISION DB CONTACT #1 CONTACT #2 C .430±.020 10.92±0.508 .055 1.40 REF .078 1.98 .167 4.24 .272 6.91 REF -DH IN-PROCESS .0200±.0040 0.508±0.102 (SEE NOTE 7) .055 1.40 BCH-XX-D SECTION "C"-"C" SEE NOTE 14 "C" 72 02 71 "C" 01 SEE NOTE 14 FIG 4 -DH: DOUBLE HORIZONTAL (SSM-1XX-XXX-DH-LC SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3) 01 "R" 02 36 "S"±.010[0.25] PK-06-N SSM-136-XXX-SV-02 SHOWN .395 10.03 .195 4.95 REF REF 01 02 36 PK-06-N SSM-136-XXX-SH-02 SHOWN PPP-12 72 02 PK-06-N SEE NOTE 6 .050 1.27 REF POS 1 FIG 6 -P: PICK AND PLACE PAD 71 01 (SSM-110-XXX-SV-P SHOWN) SSM-136-XXX-DH-02 SHOWN -02 AND -03 POS NOT AVAILABLE WITH POLARIZATION -04 POS - CANNOT OFFER IF POLARIZATION IS POS 2 OR 3 FIG 7 -05 POS - CANNOT OFFER IF POLARIZATION IS POS 3 POLARIZATION *MUST USE TR ON POS 2 & 3 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) "R" = SEE FIG 1, SHEET 1 FOR OAL "S" = IF NO OF POS IS EVEN: "R"/2 - .1975[5.017] * PROPRIETARY NOTE * IF NO OF POS IS ODD: "R"/2 - .2475[6.287] THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING .100[2.54] C.L. SURFACE MOUNT SOCKET STRIP DWG. NO. SHEET SCALE: 3:2 SSM-1XX-XXX-XX-XX-XX-X-XX-XX F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW BY: KOLB 09/11/1998 SHEET 3 OF 4

REVISION DB MATING SIDE OF CONNECTOR POS 1 CONTACT ENTRY SIDE FOR ASSEMBLY POS 1 SSM-110-XXX-SV-TR SHOWN SSM-110-XXX-SH-TR SHOWN SSM-110-XXX-DH-TR SHOWN USER DIRECTION OF UNREELING USER DIRECTION OF UNREELING USER DIRECTION OF UNREELING FIG 8 -TR: TAPE AND REEL SCALE 1:1 STANDOFF SIDE OF BODY SSM-1XX-XXX-SV-LC-P SHOWN (SSM-1XX-XXX-SV-LC-K SIMILAR) SSM-1XX-XXX-SV-LC SHOWN CORE LEAD IN POS 1 SIDE OF BODY SSM-1XX-XXX-SV-P SHOWN SSM-1XX-XXX-DH-LC SHOWN (SSM-1XX-XXX-SV-K SIMILAR) CORE LEAD IN 1ST POSITION WITH TUBE LOGO SIDE OF BODY STANDOFF SIDE OF BODY * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND SSM-1XX-XXX-SH-LC SHOWN PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS FIG 9 AINNCD. TSHAILSE DS ORCIGUHMTSE NATR ES HEAXLPLR NESOSTL YB ER EDSIESRCVLOEDSE BDY, ISNA MWTHEOCL, E TUBE VIEWS ORERP PRAORDTU, CTOED A, NTRY AUNNSAFUERTRHEODR OIZRE DIN PCEORRSPOONR OART EEDN ITNIT AYN NYO R 5P2H0O PNAER: K8 1E2A-9ST4 4B-L6V7D33, N E W F AAXL:B 8A1N2Y-9, 4IN8 -457014570 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING .100[2.54] C.L. SURFACE MOUNT SOCKET STRIP DWG. NO. SHEET SCALE: 3:2 SSM-1XX-XXX-XX-XX-XX-X-XX-XX F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW BY: KOLB 09/11/1998 SHEET 4 OF 4