REVISION AQ SSM-1XX-XXX-DV-XX-XX-XXX-XX No OF POSITIONS OPTION DO NOT -02 THRU -40 -P: PICK & PLACE PAD (SEE NOTE 5) SCALE FROM (PER ROW) (SEE NOTE 7) (USE PPP-01, SEE FIG 4, SHT 2) THIS PRINT -M: METAL PICK & PLACE PAD (SEE NOTE 5) C PLATING (USE LMP-02, SEE FIG 5, SHT 2) (No OF POS x .100 [2.54]) .010 [.25] -S: 30µ" SELECTIVE GOLD IN CONTACT AREA -K: POLYIMIDE FILM PAD MATTE TIN ON TAIL (POS 2 THROUGH 40 - SEE NOTE 5) -L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT (USE K-DOT-.256-.375-.005, SEE FIG 6, SHT 2) (No OF POS -1) x .100 [2.54] - T : MARAETATE M TIANT CTEO TNINT AOCNT TAANILD TAIL - T R : T A P E & R E E L ( S E E 2 F9IG P O8,S SITHIOT N2-S MAX) -F: 3µ" FLASH SELECTIVE GOLD .050 1.27 .020 0.51 REF CONTACT, MATTE TIN ON TAIL POLARIZING OPTION -H: 30µ" HEAVY GOLD IN CONTACT AREA -XXX: POSITION TO BE POLARIZED 02 3µ" ON TAIL (USE PK-15-N) (SEE FIG 7, SHT 2) -STL: 30µ" SELECTIVE GOLD IN CONTACT AREA (NOT AVAILABLE WITH -BE OPTION) TIN/LEAD (90/10+/-5%) TAIL .200 5.08 -SM: 30µ" SELECTIVE GOLD IN CONTACT AREA REF MATTE TIN ON TAIL MOUNTING OPTION -LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA MATTE TIN TAIL -A: ALIGNMENT PIN (SEE FIG 3, SHT 2) .100 2.54 01 -TM: MATTE TIN CONTACT AND TAIL (MOLDED: USE NSSM-XX-DV-XX, 4 POS MIN) REF 2° MAX SWAY - F M :A 3RµE" AFL MASAHT TSEE LTIENC TTAIVILE GOLD IN CONTACT - L C : L(UOSCE KLICN-G05 C-TLMIP)(SEE FIG 2)(SEE NOTE 8) (EITHER DIRECTION)C NSSM-50-DV ROW SPECIFICATION OPTION -DV: DOUBLE VERTICAL (USE NSSM-XX-DV-XX) -BE: BOTTOM ENTRY (ONLY AVAILABLE ON -DV) (FOR -DV SEE NSSM-50-DV-XX) "A" SEE NOTE 4 C-137-01-XXX -Z- .288 7.32 C.292+.002 7.42+0.04 1° C -.005 -0.13 REF (MEASURE AT BEND) (SEE NOTE 9) C C .043 1.09 .0060[0.152] "A" FLUSH TO .277 7.03 .005 [.13] MAX REF (SEE NOTE 6) 4° IN-PROCESS SECTION "A"-"A" (SEE NOTE 9) C NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PULLOUT FORCE: .50 LBS 3. MAXIMUM CUT FLASH: .010 [.25]. 4. CUT PARTS MAY OR MAY NOT HAVE NOTCHES 5. -P OPTION: 4 POSITION AND UNDER TO BE -T/R FIGURE 2 -M OPTION: 3 POSITION AND UNDER TO BE -T/R -K OPTION: 3 POSITION AND UNDER TO BE -T/R -LC: LOCKING CLIP OPTION ALL OTHER POSITIONS WITH -P, -M, -K OPTIONS ARE TO BE TUBED, UNLESS -TR ORDERED BY CUSTOMER. 6. FLUSH DIMENSION MUST BE INSPECTED ON BOTH ROWS OF ASSEMBLY. 7. -40 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY 8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION LC-05-TM IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. 9. THIS DIMENSION IS TO BE MEASURED RELATIVE TO DATUM -Z-. .050 1.27 UNLESS OTHERWISE SPECIFIED, * PROPRIETARY NOTE * DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE .XX: .01[0.3] 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .010 0.25 REF .056 1.42 REF ..XXXXXX:X : .0.0050[200.1[03.]051] ROWETRPHIRTEOTRED PNUR CCOEOJDENC,S TTE RINNAT NA OSNFFYE S RMARMAENDTEN OCER,R II NWNCCI.TOHROPOUTR ATTHEED E IXNP ARENSYS PeH-MOaNilE : i8n1fo2@-9S4A4-M67TE3C3 . c o mFA X : 8 1c2o-d94e8 -555034272 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1:0.4 DESCRIPTION: (No OF POS -2) x .100 [2.54] .100 C.L. DOUBLE VERTICAL SMT SOCKET STRIP BODY: LCP UL 94 VO, COLOR: BLACK 2° MAX TOE CONTACT: PHOS BRONZE DWG. NO. (ANY DIRECTION) SSM-1XX-XXX-DV-XX-XX-XXX-XX BY: KEVIN B 3/8/2000 SHEET 1 OF 2 F:\DWG\MISC\MKTG\SSM-1XX-XXX-DV-XX-XX-XXX-XX-MKT.SLDDRW

REVISION AQ NSSM-XX-DV-XX 02 01 FIGURE 8 (No OF POS -2) x .100 [2.54] TAPE & REEL VIEW FIGURE 3 REF .050 1.27 58 57 -A: ALIGNMENT PIN MOLDED (4 POSITION MIN) USER DIRECTION OF UNREELING POCKET NOT DETAILED DIA. .038 0.97 REF FIGURE 4 FIGURE 6 -P: PICK & PLACE PAD -K: POLYIMIDE FILM PAD "R" "R" = No OF POS x .100 [2.54] "S" EVEN = "R"/2 - .1975 [5.017] "S" .010 [.25] "S" ODD = "R"/2 - .2475 [6.287] "R" ""SR"" == "NRo"/ 2O -F . 1P2O8S [ x3 ..2150]0 [2.54] "S" .020[.51] .028±.020 0.71±0.51 .195 4.95 REF PPP-01 .395 10.03 REF .050 1.27 REF .256 6.50 .293 7.44 FIGURE 5 -M: METAL PICK & PLACE PAD "R" "R" = No OF POS x .100 [2.54] LMP-02 "S" = "R"/2 - .1195 [2.858] "S" .010[.25] PT-1-24-03-15 .280 7.11 REF PT-1-24-01-103 .225 5.72 REF .008 0.21 REF * PROPRIETARY NOTE * FIGURE 7 THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, POLARIZING POSITIONS MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 72 02 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .100 C.L. DOUBLE VERTICAL SMT SOCKET STRIP DWG. NO. SHEET SCALE: 1:0.4 71 01 SSM-1XX-XXX-DV-XX-XX-XXX-XX F:\DWG\MISC\MKTG\SSM-1XX-XXX-DV-XX-XX-XXX-XX-MKT.SLDDRW BY: KEVIN B 3/8/2000 SHEET 2 OF 2