Linear Hall-effect Sensor ICs: 055843 Datasheet SS490 Series Issue 2 Datasheet FEATURES • Linear output for circuit design flexibility • Quad-Hall IC design minimizes mechanical stress effects • Responds to either positive or negative Gauss • Uses 7 mA at 5 Vdc for energy efficiency • Single current sinking or current sourcing output • Rail-to-rail operation provides more usable signal for higher accuracy • Temperature-compensated magnetics help provide stable operation over a wide temperature range of -40°C to 150°C [-40°F to 302°F] POTENTIAL APPLICATIONS Industrial: • Basic current sensing for motor load monitoring, detection DESCRIPTION The SS490 Series are small, versatile, linear Hall-effect • Anti-tampering magnetic field sensor in smart remote utility devices which are operated by the magnetic field from a meters permanent magnet or an electromagnet. The ratiometric • Pump control in heavy-duty equipment and household output voltage is set by the supply voltage and varies appliances in proportion to the strength of the magnetic field. The • Simple linear or angular displacement sensing integrated circuitry provides increased temperature stability • Handlebar/throttle position sensing in e-bikes and scooters and sensitivity. Laser-trimmed, thin film resistors provide high • Current sensing in appliances accuracy (null to ±%, sensitivity up to ±3%) and temperature • Speed adjustment trigger in tools and appliances compensation. They respond to either positive or negative • Magnetic code reading in safes, security and building Gauss, monitoring either or both magnetic poles. The quad access control systems Hall sensing element minimizes the effects of mechanical Medical: Position sensing in infusion pumps or thermal stress on the output. The positive temperature coefficient of the sensitivity (+0.02%/°C typical) helps PORTFOLIO compensate for the negative temperature coefficients of The SS490 Series and the SS39ET, SS49E, SS59ET Linear low-cost magnets, providing a robust design over a wide Hall-effect Sensor ICs form Honeywell’s Linear Hall-effect temperature range. Rail-to-rail operation (over full voltage Sensor IC offering. range) provides a more usable signal for higher accuracy. These products have an operating temperature range of -40°C to 150°C [-40°F to 302°F], appropriate for industrial and automotive environments. The SS490B versions offer cost-effective sensing solutions with wider null and sensitivity tolerances, and a wider drift over temperature than the SS490A higher performance products. Both the SS490A and SS490B versions have a typical sinking or sourcing output of 1.5 mA continuous, use 7 mA supply current at 5.0 V at 25°C [77°F], and provide predictable performance over the full temperature range. For design flexibility, these products are available in the following flat TO-92 package styles: • SS4XX: Straight standard leads, bulk pack • SS4XX-L: Straight long leads, bulk pack • SS4XX-T2: Formed leads, ammopack tape-in-box • SS4XX-T3: Straight standard leads, ammopack tape-in-box • SS4XX-S: Surface mount, bulk pack • SS4XX-SP: Surface mount, pocket tape and reel Sensing and Internet of Things

Linear Hall-effect Sensor ICs: SS490 Series Table 1. General Specifications for All Catalog Listings (V = 5.00 V with 4.7 k output to minus, T = -40°C to 125°C [-40°F to 257°F]) s A Characteristic Condition Min. Typ. Max. Unit Supply current T = 25°C [77°F] — 7.0 8.7 mA A Output current: sourcing Vs > 4.5 V 1 1.5 — mA sinking Vs > 4.5 V 0.6 1.5 — sinking Vs > 5.0 V 1 1.5 — Response time — — 3 — µs Output voltage swing: VOM- -B applied 0.4 0.2 — V VOM+ +B applied V - 0.4 V - 0.2 — s s Supply voltage T = -40°C to 125°C [-40°F to 257°F] -4.5 5.0 10.5 V A Operating temperature — -40 [40] — 150 [302] °C [°F] Soldering temperature wave soldering process: 250°C to 260°C [482°F to 500°F] for 3 s max. and time infrared reflow process: peak temperature 245°C [473°F] for 10 s max. Table 2. Absolute Maximum Specifications for All Catalog Listings Characteristic Symbol Condition Min. Typ. Max. Unit Supply voltage V — -0.5 — 11 V s Output voltage V — -0.5 — 11 V out sourcing or Output current I — — 10 mA out sinking Operating temperature T — -55 150 °C [°F] A Storage temperature T V = 0 -55 — 165 °C [°F] S s NOTICE NOTICE CAUTION ELECTROSTATIC Absolute maximum ratings are the extreme The magnetic field strength (Gauss) required SENSITIVE DEVICES limits the device will momentarily withstand to cause the switch to change state (operate DO NOT OPEN OR HANDLE EXCEPT AT A without damage to the device. Electrical and and release) will be as specified in the STATIC FREE WORKSTATION ESD SENSITIVITY: mechanical characteristics are not guaranteed magnetic characteristics. To test the switch CLASS 3 if the rated voltage and/or currents are against the specified limits, the switch must exceeded, nor will the device necessarily be placed in a uniform magnetic field. operate at absolute maximum ratings. Table 3. Specifications for Catalog Listing SS494B (V = 5.00 V with 4.7 k output to minus, T = -40°C to 125°C [-40°F to 257°F]) s A Characteristic Condition Min. Typ. Max. Unit B limits for linear -B max. -375 -420 — Gauss operation +B max. +375 +420 — B = -60 to +60 — — — Linearity % of span B = -375 to +375 0 -1.0 -1.5 Sensitivity T = 25°C [77°F] 4.6 5.0 5.4 mV/Gauss A Null T = 25°C [77°F] 2.26 2.50 2.74 V A T = -40°C to 25°C [-40°F to 77°F] 0 — +0.08 A Sensitivity drift %/°C T = 25°C to 150°C [77°F to 302°F] -0.02 — +0.08 A B = 0; T = -40°C to 125°C [-40°F to 257°F] -0.064 — +0.064 A Vnull drift %/°C B = 0; T = 125°C to 150°C [257°F to 185°F] -0.02 — +0.08 A 2 Sensing and Internet of Things

Linear Hall-effect Sensor ICs: SS490 Series Table 4. Specifications for Catalog Listings Beginning with SS495 (V = 5.00 V with 4.7 k output to minus, T = -40°C to 125°C [-40°F to 257°F]) s A Characteristic Condition Min. Typ. Max. Unit SS495A B limits for -B max. -600 -670 — Gauss linear operation +B max. +600 +670 — Linearity B = -600 to +600 0 -1.0 1.5 % of span Sensitivity T = 25°C [77°F] 3.00 3.125 3.25 mV/Gauss A Null T = 25°C [77°F] 2.425 2.50 2.575 V A T = -40°C to 25°C [-40°F to 77°F] 0 — +0.06 Sensitivity drift A %/°C T = 25°C to 150°C [77°F to 302°F] -0.01 — +0.05 A B = 0; T = 25°C to 125°C [77°F to 257°F] -0.06 — +0.06 Vnull drift A %/°C B = 0; T = 125°C to 150°C [257°F to 302°F] -0.08 — +0.08 A SS495A1 B limits for -B max. -600 -670 — Gauss linear operation +B max. +600 +670 — Linearity B = -600 to +600 0 -1.0 1.5 % of span Sensitivity T = 25°C [77°F] 3.031 3.125 3.219 mV/Gauss A Null T = 25°C [77°F] 2.425 2.50 2.575 V A T = -40°C to 25°C [-40°F to 77°F] 0 — +0.06 Sensitivity drift A %/°C T = 25°C to 150°C [77°F to 302°F] -0.01 — +0.05 A B = 0; T = 25°C to 125°C [77°F to 257°F] -0.04 — +0.04 Vnull drift A %/°C B = 0; T = 125°C to 150°C [257°F to 302°F] -0.08 — +0.08 A SS495A2 B limits for -B max. -600 -670 — Gauss linear operation +B max. +600 +670 — Linearity B = -600 to +600 0 -1.0 1.5 % of span Sensitivity T = 25°C [77°F] 2.969 3.125 3.281 mV/Gauss A Null T = 25°C [77°F] 2.400 2.50 2.600 V A T = -40°C to 25°C [-40°F to 77°F] -0.01 — +0.07 Sensitivity drift A %/°C T = 25°C to 150°C [77°F to 302°F] -0.02 — +0.06 A B = 0; T = 25°C to 125°C [77°F to 257°F] -0.07 — +0.07 Vnull drift A %/°C B = 0; T = 125°C to 150°C [257°F to 302°F] -0.08 — +0.08 A SS495B B limits for -B max. -600 -670 — Gauss linear operation +B max. +600 +670 — Linearity B = -600 to +600 0 -1.0 1.5 % of span Sensitivity T = 25°C [77°F] 2.875 3.125 3.375 mV/Gauss A Null T = 25°C [77°F] 2.350 2.50 2.650 V A T = -40°C to 25°C [-40°F to 77°F] -0.02 — +0.08 Sensitivity drift A %/°C T = 25°C to 150°C [77°F to 302°F] -0.02 — +0.08 A B = 0; T = 25°C to 125°C [77°F to 257°F] -0.08 — +0.08 Vnull drift A %/°C B = 0; T = 125°C to 150°C [257°F to 302°F] -0.08 — +0.08 A Sensing and Internet of Things 3

Linear Hall-effect Sensor ICs: SS490 Series Table 5. Specifications for Catalog Listings Beginning with SS496 (V = 5.00 V with 4.7 k output to minus, T = -40°C to 125°C [-40°F to 257°F]) s A Characteristic Condition Min. Typ. Max. Unit SS496A B limits for -B max. -750 -840 — Gauss linear operation +B max. +750 +840 — Linearity B = -750 to +750 0 -1.0 1.5 % of span Sensitivity T = 25°C [77°F] 2.4 2.5 2.575 mV/Gauss A Null T = 25°C [77°F] 2.425 2.50 2.575 V A T = -40°C to 25°C [-40°F to 77°F] 0 — +0.06 Sensitivity drift A %/°C T = 25°C to 125°C [77°F to 257°F] -0.01 — +0.05 A B = 0; T = 25°C to 125°C [77°F to 257°F] -0.048 — +0.048 Vnull drift A %/°C B = 0; T = 125°C to 150°C [257°F to 302°F] -0.064 — +0.064 A SS496A1 B limits for -B max. -750 -840 — Gauss linear operation +B max. +750 +840 — Linearity B = -750 to +750 0 -1.0 1.5 % of span Sensitivity T = 25°C [77°F] 2.425 2.500 2.575 mV/Gauss A Null T = 25°C [77°F] 2.425 2.50 2.575 V A T = -40°C to 25°C [-40°F to 77°F] 0 — +0.06 A Sensitivity drift T = 25°C to 125°C [77°F to 257°F] -0.01 — +0.05 %/°C A T = 125°C to 150°C [257°F to 302°F] -0.04 — +0.08 A B = 0; T = 25°C to 125°C [77°F to 257°F] -0.032 — +0.032 Vnull drift A %/°C B = 0; T = 125°C to 150°C [257°F to 302°F] -0.064 — +0.064 A SS496B B limits for -B max. -750 -840 — Gauss linear operation +B max. +750 +840 — Linearity B = -750 to +750 0 -1.0 1.5 % of span Sensitivity T = 25°C [77°F] 2.300 2.500 2.700 mV/Gauss A Null T = 25°C [77°F] 2.350 2.50 2.650 V A T = -40°C to 25°C [-40°F to 77°F] -0.02 — +0.08 Sensitivity drift A %/°C T = 25°C to 150°C [77°F to 302°F] -0.02 — +0.08 A B = 0; T = 25°C to 125°C [77°F to 257°F] -0.064 — +0.064 Vnull drift A %/°C B = 0; T = 125°C to 150°C [257°F to 302°F] -0.064 — +0.064 A Figure 1. Block Diagram Figure 2. Maximum Supply Voltage vs Temperature 10.5 Vsupply (+) HSaelnl-seofrfe IcCt andTC rAiirgmcgupeitrlifier Output (O) Voltage (V) 54..55 Acceptable operating region Ground (-) 0 125 150 [257] [302] Ambient Temperature (°C [°F]) Figure 3. Transfer Characteristics: Typical Output Voltage SS494X SS495X SS496X 4.5 4.5 4.5 V) V) V) e ( 2.5 e ( 2.5 e ( 2.5 g g g a a a olt olt olt V V V 0.5 0.5 0.5 -400 -200 0 200 400 -640 -320 0 320 640 -800 -400 0 400 800 Magnetic Range (Gauss) Magnetic Range (Gauss) Magnetic Range (Gauss) 4 Sensing and Internet of Things

Linear Hall-effect Sensor ICs: SS490 Series Figure 4. SS490 Series Flat TO-92-Style Mounting and Dimensional Drawings (For reference only: mm/[in].) A: Straight Standard Leads Sensor IC, Bulk Pack B: Straight Long Leads Sensor IC, Bulk Pack 4,06 4,06 [0.160] [0.160] 1,57 1,57 [0.062] [0.062] 2,50 0,76 2,50 0,76 [0.098] [0.030] [0.098] [0.030] 0,46 [0.118] 49XX 49XX N S 3,00 XXX 1,74 N S [03.1,0108] XXX 1,74 [0.118] [0.069] [0.069] 3X 0,56 Max. 3X 0,56 Max. [0.022] [0.022] 15,5 - 14,4 [0.61 - 0.57] 18,70 [0.74] + - 0 + - 0 3X 0,38 3X 0,38 [0.015] 2X 1,27 [0.015] 3X 0,38 3X 0,38 [0.05] [0.015] [0.015] 2X 1,27 [0.05] Note: Ensure the minimum hole size in the PCB is 0,68 mm [0.027] dia. based on the IPC 2222 Level B standard. C. Formed Leads Sensor IC, Ammopack Tape-in-Box 4,06 [0.160] 1,57 [0.062] [02.0,5908] [00.0,7360] [ 01 [., 000130.,009 M30]9 aM]xa.x. Sensor 1 [ 01.,00309 M]ax. [ 01.,00309 M]aAxd.hesive tape Sensor 24 Sensor 1 3,00 4X9XXXX 4X9XXXX 4X9XXXX 4X9XXXX [ 00.,05200 M]ax. 4X9XXXX 4X9XXXX [0.118] 11,00 Fold [0.433] 20,00 2X 3,35 [0.787] [0.13] [105.6,51 -- 104.5,74] [06.2,0306][90,.305041] 18,00 [7,09] Fold [ 0 0[ 01.,05.,0425522 M6 M]]aaxx.. [60,.23551][20,.57]0 ø[04.1,0507] + - 0 3X 0,38 0,56 Max. 3X 0,38 [0.015] [0.022] [0.015] 2X 2,54 [0.10] D. Straight Leads Sensor IC, Ammopack Tape-in-Box (See Figure 5.A. for individual sensor IC dimensions.) 1,00 Max. 1,00 Max. [ 0 [. 0013.,00930]9 M]ax. Sensor 1 [ 01.,00309 M]ax. [0.039]Adhesive tape Sensor 24 Sensor 1 4X9XXXX 4X9XXXX 4X9XXXX 4X9XXXX 0,50 Max. 4X9XXXX 4X9XXXX [0.020] [101.4,3030] Fold 20,00 [0.787] [06.2,0306][90,.305041] 18,00 [7,09] Fold 0,55 Max. [0.022] 6,35 [ 01.,04526 M]ax. [0.251][20,.57]0 ø[04.1,0507] Sensing and Internet of Things 5

Linear Hall-effect Sensor ICs: SS490 Series Figure 5. SS490 Series Flat TO-92-Style Mounting and Dimensional Drawings (continued) E. Surface Mount Sensor IC, Bulk Pack 4,06 [0.160] 1,57 [0.062] 2,50 0,76 [0.098] [0.030] 49XX N S 3,00 XXX 1,74 [0.118] [0.069] 1,52 [0.060] 3,18 [0.125] + - 0 3X 0,56 Max. 3X 0,38 2X 1,27 [0.022] [0.015] [0.05] F. Surface Mount Sensor IC, Pocket Tape and Reel (See Figure 5.E. for individual sensor IC dimensions.) 8,00 [0.315] ø1,5 4,00 [0.059] [0.157] 0,41 Max. 2,00 A [0.006] [0.079] 1,75 [0.069] 5,50 49XX 49XX 49XX [0.217] XXX XXX XXX 6,60 [0.260] 12,00 [0.472] 4,41 A 1,70 0,10 [0.174] [0.067] [0.004] Section A-A Top cover tape 12,2 [0.480] Measured at hub 18,39 Max. [0.724] ø33,02 Measured at hub [1.300] ø50,0 [1.970] 1,5 Min. [0.059] Drive spokes ø[01.531,02] ø [71.7081] Arbor hole 6 Sensing and Internet of Things

Linear Hall-effect Sensor ICs: SS490 Series Table 5. Order Guide for the SS490 Series Catalog Listing Description SS49X: Flat TO-92- style, straight standard leads, bulk pack, 1000 units/bag SS494B See Tables 1, 2, 3 for specifications; Figure 4.A. for dimensions. SS49X SS49X-L SS495A See Tables 1, 2, 4 for specifications; Figure 4.A. for dimensions. SS495A1 See Tables 1, 2, 4 for specifications; Figure 4.A. for dimensions. SS495A2 See Tables 1, 2, 4 for specifications; Figure 4.A. for dimensions. SS495B See Tables 1, 2, 4 for specifications; Figure 4.A. for dimensions. SS496A See Tables 1, 2, 5 for specifications; Figure 4.A. for dimensions. SS496A1 See Tables 1, 2, 5 for specifications; Figure 4.A. for dimensions. SS496B See Tables 1, 2, 5 for specifications; Figure 4.A. for dimensions. SS49X-L: Flat TO-92- style, straight long leads, bulk pack, 1000 units/bag SS495A-L See Tables 1, 2, 4 for specifications; Figure 4.B. for dimensions. SS495A1-L See Tables 1, 2, 4 for specifications; Figure 4.B. for dimensions. SS495A2-L See Tables 1, 2, 4 for specifications; Figure 4.B. for dimensions. SS49X-T2: Flat TO-92- style, formed leads, ammopack tape-in-box, 5000 units/box SS494B-T2 See Tables 1, 2, 3 for specifications; Figure 4.C. for dimensions. SS49X-T2 SS49X-T3 SS495A-T2 See Tables 1, 2, 4 for specifications; Figure 4.C. for dimensions. SS495A1-T2 See Tables 1, 2, 4 for specifications; Figure 4.C. for dimensions. SS495A2-T2 See Tables 1, 2, 4 for specifications; Figure 4.C. for dimensions. SS495B-T2 See Tables 1, 2, 4 for specifications; Figure 4.C. for dimensions. SS496A-T2 See Tables 1, 2, 5 for specifications; Figure 4.C. for dimensions. SS496A1-T2 See Tables 1, 2, 5 for specifications; Figure 4.C. for dimensions. SS496B-T2 See Tables 1, 2, 5 for specifications; Figure 4.C. for dimensions. SS49X-T2: Flat TO-92- style, straight standard leads, ammopack tape-in-box, 5000 units/box SS494B-T3 See Tables 1, 2, 3 for specifications; Figure 4.D. for dimensions. SS495A-T3 See Tables 1, 2, 4 for specifications; Figure 4.D. for dimensions. SS495A1-T3 See Tables 1, 2, 4 for specifications; Figure 4.D. for dimensions. SS495A2-T3 See Tables 1, 2, 4 for specifications; Figure 4.D. for dimensions. SS495B-T3 See Tables 1, 2, 4 for specifications; Figure 4.D. for dimensions. SS496A-T3 See Tables 1, 2, 5 for specifications; Figure 4.D. for dimensions. SS496A1-T3 See Tables 1, 2, 5 for specifications; Figure 4.D. for dimensions. SS496B-T3 See Tables 1, 2, 5 for specifications; Figure 4.D. for dimensions. SS49X-S: Flat TO-92- style, surface mount, bulk pack, 1000 units/bag SS494B-S See Tables 1, 2, 3 for specifications; Figure 4.E. for dimensions. SS49X-S SS49X-SP SS495A-S See Tables 1, 2, 4 for specifications; Figure 4.E. for dimensions. SS495A1-S See Tables 1, 2, 4 for specifications; Figure 4.E. for dimensions. SS495A2-S See Tables 1, 2, 4 for specifications; Figure 4.E. for dimensions. SS495B-S See Tables 1, 2, 4 for specifications; Figure 4.E. for dimensions. SS496A-S See Tables 1, 2, 5 for specifications; Figure 4.E. for dimensions. SS496A1-S See Tables 1, 2, 5 for specifications; Figure 4.E. for dimensions. SS496B-S See Tables 1, 2, 5 for specifications; Figure 4.E. for dimensions. SS49X-SP: Flat TO-92- style, surface mount, pocket tape and reel, 1000 units/reel SS494B-SP See Tables 1, 2, 3 for specifications; Figure 4.F. for dimensions. SS495A-SP See Tables 1, 2, 4 for specifications; Figure 4.F. for dimensions. SS495A1-SP See Tables 1, 2, 4 for specifications; Figure 4.F. for dimensions. NOTICE SS495A2-SP See Tables 1, 2, 4 for specifications; Figure 4.F. for dimensions. Products ordered in bulk pack (plastic bag) may not have perfectly straight leads as SS495B-SP See Tables 1, 2, 4 for specifications; Figure 4.F. for dimensions. a result of normal handling and shipping SS496A-SP See Tables 1, 2, 5 for specifications; Figure 4.F. for dimensions. operations. Please order a tape packaging SS496A1-SP See Tables 1, 2, 5 for specifications; Figure 4.F. for dimensions. option for applications requiring straight SS496B-SP See Tables 1, 2, 5 for specifications; Figure 4.F. for dimensions. leads. Sensing and Internet of Things 7

m WARNING ADDITIONAL MATERIALS PERSONAL INJURY The following associated literature is available at DO NOT USE these products as safety or emergency stop sensing.honeywell.com: devices or in any other application where failure of the • Product range guide product could result in personal injury. • Product line guide Failure to comply with these instructions could result in • Product installation instructions death or serious injury. • Application notes • CAD models m WARNING • Product images MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the appli- cable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgment or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defec- tive. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. For more information While Honeywell may provide application assistance personally, Honeywell Sensing and Internet of through our literature and the Honeywell web site, it is buyer’s Things services its customers through a sole responsibility to determine the suitability of the product in worldwide network of sales offices and the application. distributors. For application assistance, Specifications may change without notice. The information we current specifications, pricing or the supply is believed to be accurate and reliable as of this writing. nearest Authorized Distributor, visit However, Honeywell assumes no responsibility for its use. sensing.honeywell.com or call: Asia Pacific +65 6355-2828 Europe +44 (0) 1698 481481 USA/Canada +1-800-537-6945 Honeywell Sensing and Internet of Things 9680 Old Bailes Road Fort Mill, SC 29707 005843-2-EN | 2 | 06/18 www. honeywell.com © 2018 Honeywell International Inc. All rights reserved.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: H oneywell: SS495A