SS-10/S-2050 ROTARY SELECTOR SWITCHES SS-10 構造図 RoHS compliant INTERNAL STRUCTURE SS-10 series 1 7 2 6 3 5 4 Part name Material Flammability ■ FEATURES ① Rotor Polyoxymethylene ● RoHS compliant ② “O” ring Silicone rubber UL94HB ● Compact-size DIP pin configuration ● Protected against dust and washable after soldering ③ Base Polybutyleneterephthalate ● Self-cleaning mechanism ④ Terminal pin Copper alloy, Gold-plated ⑤ Contact Copper alloy, Gold-plated — ⑥ P.C.B. Gold-plated epoxy board ⑦ Housing Polybutyleneterephthalate UL94HB ■ PART NUMBER DESIGNATION SS-10 - 1 6 S P - L - A E W Series name Form of packaging W：Tray packaging No. of poles Blank：Plastic bag 1：1 pole 2：2 poles Terminal pin No. of contacts E：Au (Lead-free) 3：3 contacts (2 poles only) 5：5 contacts (1 pole only) 6：6 contacts (1 pole only) Schematic　　　　※1 Contact timing A：Without OFF position N：Non-shorting (1pole 6 contacts with OFF, 2 poles 3 contacts) Blank：With OFF position S：Shorting (1 pole 5 contacts, 1 pole 6 contacts without OFF) Shape of rotor L：With knob (extended shaft) Blank：Without knob Setting position P：Top setting ※1：The designation for schematic is only aplicable to SS-10-16□□. The other partnumbers (ex. S-2050, SS-10-15SPEW) are without OFF position. ※Please refer to the LIST OF PART NUMBERS when placing orders.

SS-10/S-2050 ROTARY SELECTOR SWITCHES ■ LIST OF PART NUMBERS Contact timing Circuit type Shape Form of packaging Pieces in package Non-shorting Shorting Tray packaging S-2050W 50 pcs./tray Without knob Top Plastic bag S-2050 25 pcs./pack setting Tray packaging S-2150W 50 pcs./tray With knob Plastic bag S-2150 25 pcs./pack 1 pole 4 contacts Tray packaging S-2051W 50 pcs./tray Without knob Side Plastic bag S-2051 25 pcs./pack setting Tray packaging S-2151W 50 pcs./tray With knob Plastic bag S-2151 25 pcs./pack Tray packaging SS-10-15SP-EW 50 pcs./tray Without knob Plastic bag SS-10-15S-PE 25 pcs./pack 1 pole 5 contacts Tray packaging SS-10-15SP-L-EW 50 pcs./tray With knob Plastic bag SS-10-15SP-L-E 25 pcs./pack Tray packaging SS-10-16NP-EW 50 pcs./tray Without knob Plastic bag SS-10-16NP-E 25 pcs./pack With OFF Tray packaging SS-10-16NP-L-EW 50 pcs./tray With knob 1 pole Top Plastic bag SS-10-16NP-L-E 25 pcs./pack 6 contacts setting Tray packaging SS-10-16SP-AEW 50 pcs./tray Without knob Plastic bag SS-10-16SP-AE 25 pcs./pack Without OFF Tray packaging SS-10-16SP-L-AEW 50 pcs./tray With knob Plastic bag SS-10-16SP-L-AE 25 pcs./pack Tray packaging SS-10-23NP-EW 50 pcs./tray Without knob Plastic bag SS-10-23NP-E 25 pcs./pack 2 poles 3 contacts Tray packaging SS-10-23NP-L-EW 50 pcs./tray With knob Plastic bag SS-10-23NP-L-E 25 pcs./pack : Not manufactured ※ Verify the above part numbers when placing orders. Tray version can be supplied only in tray nuits. ■ SCHEMATIC DIAGRAMS ● 1 pole 4 contacts ● 1 pole 5 contacts ● 2 poles 3 contacts Series spSewciifticchaitniogn s Schematic Series spSe1wci2ifti3cch4ai5tniogn s Schematic 1Series spSewciifticchaitniogn s Schematic 2 3 　2　 1 4 2 1　2　31 3 SS--22005501 1 2 1342 34 C 12 S12123S-10-15SP-E 12 3451 2 345 C CC 123 SS345-1210-23NP-E 1 　2　3 C C C 123 1231 12 SS--22115501 COCNC1ON11 C C 34 S344S-10-15SP-L-EC C1ON 1 C CC 45 SS-34510-23NP-L-ECC ONCCC11 ON 111 C C C 231 23 321 ● 1 pole 6 contactOsN (With OFF) ONC 1 ● 1 pole 6 contacts (Without OFF) C 1 3 ON ON Series Switchin1g 2sp3e4c5ifications Schematic(OFF) Series Switchin1g 2sp3e4c5ifications Schematic 11 22 334455666 C ((OOFF12311FF)) 1122 334455666 C 123112 SS-10-16NP-E C 422 SS-10-16SP-AE CC 423 SS-10-16NP-L-E CC 533 SS-10-16SP-L-AE CC 534 C 1 CC 644 C 1 C 645 5 ON 5 CON 1 56 CC 11 66 C 1 6 ON ON ON ON

SS-10/S-2050 ROTARY SELECTOR SWITCHES SS-10端子接続 SS-10端子接続 ■ TERMINAL CONNECTION / P.C.B. THROUGH HOLE DIMENSIONS (Unit: mm) S-2050 S-2051 SS-10-15 SS-10-16 SS-10-23 S-2150 S-2151 Operating face Operating face 4 3 2 1 Terminal pin layout 3 2 C 1 3 2 C 1 3 2 C 1 4 3 2 1 4 3 2 1 3 2 C 1 3 2 C 1 3 2 C 1 4 3 2 1 (Bottom view) NC C 5 4 6 C 5 4 1 C 2 3 C C NC C 5 4 6 C 5 4 1 C 2 3 C C P.C(B.Bo.t tdoimm evineswio)ns DSSim-1e0n-s2io3n s iesr iceosm. mon to SS-10-15, SS-10-16 and 2.540.1±2.540.1± 282.8 5.– 54– 4 ± φ ±φ 0 00.01..18.8 h hoolele7.620.1±7.620.1± 2.540.1±2.540.1± 225.55. 5– 4–4 ± φ± 0φ 0 .01.0.18.8 h hoolele7.620.1±7.620.1± 22.5.2.540.1±52.540.1±44±±00.1.1　　OOppeerraatitningg f a5fa5c c– e–e φ φ 05.080.1±05.080.1±.8.8 h hoolele S – 2050 case SSSS – – 1 100 c caassee SSS – –– 2 22110555000 c ccaaassseee SSS –– – 22 2100555111 cc caaassseee S – 2151 case ■ STANDARD SPECIFICATIONS ■ ELECTRICAL CHARACTERISTICS 1 pole 4 contacts Contact rating Circuit type 1 pole 5 contacts Non-switching DC50 V 100 mA 1 pole 6 contacts Switching DC5 V 100 mA 2 poles 3 contacts Minimum DC20 mV 1 μA Operating temperature range Shorting Contact timing −25 ~ 70 °C Non-shorting Storage temperature range Contact resistance 100 mΩ maximum Sealing Washable by “O” ring Insulation resistance 100 MΩ (DC100 V) minimum ※Please refer to page 150, 151 Dielectric strength AC300 V, 60 s Approx. 0.84 g (without knob) Net weight Approx. 0.94 g (with knob) ■ ENVIRONMENTAL CHARACTERISTICS ■ MECHANICAL CHARACTERISTICS (Amplitude) 1.5 mmor No. of positions 3, 4, 5, 6 Vibration (Acceleration) 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each Adjustment torque 40 mN·m {408 gf·cm} maximum 490 m/s2, 11 ms Shock Stopper strength 50 mN·m {510 gf·cm} minimum 6 directions for 3 times each 36°(1 pole 4 contacts ) Humidity (Steady state) 40 °C, Relative humidity 90 ~ 95 %, 240 h 2 poles 3 contacts Stepping angle 30° (1 pole 5 contacts) 500 cycles minimum 22.5° (1 pole 6 contacts, with OFF) Load life DC5 V, 100 mA 28° (1 pole 6 contacts, without OFF) Terminal strength 15 N {1.53 kgf} minimum High temperature exposure 70 °C, 240 h Solderability 245 ± 3 °C, 2 ~ 3 s Low temperature exposure −25 °C, 96 h Flow soldering Thermal shock −25 (0.5 h) ~ 70 °C (0.5 h), 5 cycles 260 ± 3 °C, 5 ~ 6 s, two times maximum Soldering heat Manual soldering 380 ± 10 °C, 3 ~ 4 s { } : Reference only

SS-10/S-2050 ROTARY SELECTOR SWITCHES ■ OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) ● SS-10-15SP-E ● SS-10-15SP-L-E Part No., Production date code & Part No., Production date code & Lead-free Identification mark Lead-free Identification mark 7 4. 5 ± 0.5 6.6 7 4.5 ± 0.5 10 2.54 7.62 10 2.54 7.62 1 4 3.9 1 4 10 SS–10 2.54 C2 C5 10 SS–10 2.54 C2 C5 3 NC 3 NC 0.7 W × 3.2 L ×30 ˚1 D ±8 – 0.50.1t = 0.22.54 0.7 W × 1 D30˚ Straight knurlM = 0.2 ±8 – 0.50.1t = 0.22.54 ● SS-10-16SP-AE ● SS-10-16SP-L-AE Part No., Production date code & Lead-free Identification mark Part No., Production date code & Lead-free Identification mark 0.7 W × 3.2 L × 1 D 7 4.5 ± 0.5 6.6 7 4.5 ± 0.5 101 2.54 1 7.62 4 101 3.9 2.54 1 7.62 4 10 SS–10 62354 2.54 C2 C5 10 SS–10 62354 2.54 C2 C5 3 6 3 6 28˚ ±8 – 0.50.1t = 0.22.54 0.7 W × 1 D28˚ Straight knurlM = 0.2 ±8 – 0.50.1t = 0.22.54 ● SS-10-16NP-E ● SS-10-16NP-L-E Part No., Production date code & Part No., Production date code & Lead-free Identification mark Lead-free Identification mark 7 4.5 ± 0.5 6.6 7 4.5 ± 0.5 10 2.54 7.62 10 2.54 7.62 1 4 3.9 1 4 10 SS–10 612543 2.54 C2 C5 10 SS–10 612543 2.54 C2 C5 3 6 3 6 0.7 W × 3.22 L2. ×5˚ 1 D ±8 – 0.50.1t = 0.22.54 0.7 W × 1 D22.5˚ Straight knurl M = 0.2 ±8 – 0.50.1t = 0.2 2.54 ● SS-10-23NP-E ● SS-10-23NP-L-E Part No., Production date code & Lead-free Identification mark Part No., Production date code & Lead-free Identification mark 0.7 W × 3.2 L × 1 D 7 4.5 ± 0.5 6.6 7 4.5 ± 0.5 10 2.54 7.62 10 2.54 7.62 1 3 3.9 1 3 10 SS–10 132 36˚ 2.54 C32 1C2 10 SS–10 132 2.54 C32 C12 ±8 – 0.50.1t = 0.2t = 0.22.54 0.7 W × 1 D36˚ Straight knurlM = 0.2 ±8 – 0.50.1t = 0.2 2.54

SS-10/S-2050 ROTARY SELECTOR SWITCHES S-2050 外形図 S-2150 外形図 ■ OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) ● S-2050 ● S-2150 0.7 W × 3.2 L × 1 D 0.7 W × 1 D Part No. & Production date code Part No. & Production date code 7 4.5 ± 0.5 6.6 7 4.5 ± 0.5 10 7.62 10 7.62 2.54 2.54 1 4 1 4 10 423 2.54 C 32 10 423 3.9φ 2.54 C 32 S-2051 外形図 36˚ ±5–0.50.1t = 0.2 2.54 1 36˚ Straight knurl M = 0.2 ±5–0.50.1t = 0.22.54 1 ● S-2051 ● S-2151 Part No. & Production date code Part No. & Production date code 0.7 W × 3.2 L × 1 D 0.7 W × 1 D 11.5 10 36˚ 10 36˚ 6.6 18.1 10 1 2 34 10 1 2 34 3.9φ ±3.50.5 4 3 2 15 – 0.5 ± 0.1 6 5.08 C ±3.50.5 4 3 2 51 – 0.5 ± 0.1 12.6 5.08 C t = 0.2 t = 0.2 2.54 2.54 2.54 2.54 2.54 2.54 Straight knurl M = 0.2

S-1000長軸用ツマミ付き SS-10/S-2050 ROTARY SELECTOR SWITCHES ■ SWITCHES WITH KNOB AS EXTENDED SHAFT (Unit: mm) 10 0.7 5 5 1 φ 9. φ 5. The large knob is common to S-1000A, S-2000A, SA-5000, and SS-10 series. ※ Knob can’t be dettached due to being fixed. Simple knob can’t be sold. ■ PACKAGING SPECIFICATIONS ■ PACKAGING SPECIFICATIONS <Tray packaging specifications> <Bulk pack specifications> ● Tray version is packaged in 50 pcs. per tray. Orders will ● The smallest unit of bulk pack in a plastic bag is 10 pcs. be accepted for units of 50 pcs., i. e., 50, 100, 150 pcs. per pack. etc. Orders will be accepted for unit of minimum 10 pcs., i.e., ● Tray version is boxed with 10 trays. 10, 20, 30 pcs., etc. ● Boxing of bulk in a plastic bag is performed with 25 pcs. (standard 50 pcs.) per box. <Note> : The switch with a large knob for manual adjustment is available as a semi-standard item.