Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical Click this icon to try the new information than ever before. Interactive Catalog. Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032

Solid State Hall Effect SR13/15 Series Position Sensors FEATURES • 3.8 to 30 VDC supply voltage • Digital current sinking output • Snap-in or flat mount packages • Quad-Hall design eliminates stress effects • Temperature compensated magnetics • Bipolar, unipolar and latching magnetics • High output capability, 50mA absolute maximum • Operating temperature The newly introduced SR13/15 Series package enhancements permit quick range -40(cid:1)C to +150(cid:1)C and easy sensor installation, increasing the usability of the SS400 Series. • Varying leadwire lengths of These devices can be installed without additional mounting hardware. The 24 AWG Radox wire snap-in and flat mount sensor packages can house any of the present SS400 Series sensors or any similarly sized sensing elements. The packages also provide varying 24AWG Radox leadwire lengths or connector capabilities. The SS400 Series position sensors have a thermally balanced integrated circuit that provides predictable performance for the -40(cid:1)C to +150(cid:1)C operating temperature range. The SS400 Series band gap regulation provides stable operation over 3.8 to 30 VDC. Current consumption is 10 WARNING mA at +40(cid:1)C ambient temperature. SS400 Series sensors are capable of continuous 20 mA sinking output. The sensors may be cycled as high as PERSONAL INJURY • DO NOT USE these 50 mA maximum. Bipolar, unipolar and latching magnetics are available. products as safety or WARNING emergency stop devices or in any other application MISUSE OF DOCUMENTATION where failure of the product • The information presented in this product sheet is for reference only. could result in personal Do not use this document as product installation information. injury. • Complete installation, operation, and maintenance information is Failure to comply with these provided in the instructions supplied with each product. instructions could result in Failure to comply with these instructions could result in death or serious death or serious injury. injury. Sensing and Control

Solid State Hall Effect Position Sensor SR13/15 Series OPERATING CHARACTERISTICS –40°C TO 125°C, 3.8 TO 30 VDC Min. Typ. Max. Remarks Supply voltage 3.8  30 VDC Current consumption   13 mA Output voltage (operated)   0.40 Sinking 10 mA max. Sink current (operated)   20 mA Output leakage current (released)   5 µA V = 30 VDC, V = 30 VDC OUT CC Output switching time Rise, 10 to 90%  1.5 µs. 1.5 µs V = 12 V, R = 1.6 KΩ, C = 20 pF CC L L Fall, 90 to 10%  15 µs 1.5 µs Operating Temperature -40°C to +150°C (-40°F to +302°F) MAGNETIC CHARACTERISTICS SR13C-A1 SR13D-A1 SR13F-A1 SR13R-A1 SR15C-A3 Magnetic Type Unipolar Unipolar Unipolar Latching Unipolar 25°C Max. Op. 180 115 390 85 180 Min. Rel. 75 20 235 -85 75 Min. Dif. 25 20 30 50 25 -20°C to 85°C Max. Op. 215 135 435 110 215 Min. Rel. 60 15 200 -110 60 Min. Dif. 10 8 30 50 10 NOTICE Bipolar Hall effect sensors may have an initial output in either the On or Off state if powered up with an applied magnetic field in the differential zone (applied magnetic field > Brp and < Bop). Honeywell recommends allowing 10 µs for output voltage to stabilize after supply voltage has reached 5 volts. BLOCK CIRCUIT WIRING DIAGRAM Vs (+) TRIGGER OUTPUT HALL CIRCUIT SENSOR AND (O) N. H. AMPLIFIER GROUND (-) 2 Honeywell • Sensing and Control For application help: call 1-800-537-6945

Solid State Hall Effect Position Sensors SR13/15 Series MOUNTING DIMENSIONS (for reference only) mm/in SNAP-IN DIGITAL POSITION SENSOR (SR13C-A1, SR13D-A21, SR13F-A1, SR13R-A1) 0,5 TFoa cSeensor 0.02 2,5 7,6 0.10 0.30 2,3 C.L. of 2,5 0.09 Sensor MASSE 0.10 11,30 20,3 EXICOMBLED 0 4.1,89 5,80 0.445 0.80 IN 0.23 3,43 3 X 152,4 0.135 3 X 5,1 6.00 0.20 3,8 6,4 0.15 0.25 Red(+) Green(O) Black(-) 5,1 0.20 FLAT MOUNT DIGITAL POSITION SENSOR (SR15C-A3) 7,6 0,5 To Sensor 0.30 Face 0.02 C.L. of 2,5 Sensor MASSE 0.10 20,3 EM 0.80 XB ICOLED IN 3 X 254,0 3 X 5,1 10.00 0.20 3,8 0.15 Red(+) Green(O) Black(-) 5,1 0.20 For application help: call 1-800-537-6945 Honeywell • Sensing and Control 3

Solid State Hall Effect Position Sensors SR13/15 Series SUGGESTED MOUNTING DETAIL 3,17 0.12 2,8 0.11 11,3 0.44 5,1 0.20 WARRANTY/REMEDY Specifications may change For application assistance, Honeywell warrants goods without notice. The current specifications, or of its manufacture as being information we supply is name of the nearest free of defective materials and believed to be accurate and Authorized Distributor, contact faulty workmanship. Contact reliable as of this printing. a nearby sales office. Or call: your local sales office for However, we assume no 1-800-537-6945 USA warranty information. If responsibility for its use. 1-800-737-3360 Canada warranted goods are returned While we provide 1-815-235-6847 International to Honeywell during the period application assistance FAX of coverage, Honeywell will personally, through our 1-815-235-6545 USA repair or replace without literature and the Honeywell INTERNET charge those items it finds web site, it is up to the www.honeywell.com/sensing defective. The foregoing is customer to determine the info@micro.honeywell.com Buyer’s sole remedy and is in suitability of the product in the lieu of all other warranties, application. expressed or implied, including those of merchantability and fitness for a particular purpose. Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 www.honeywell.com/sensing Printed with Soy Ink on 50% Recycled Paper 005842-1-EN IL50 GLO 999 Printed in USA

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: H oneywell: SR13C-A1 SR15C-A3 SR13R-A1