I N D U C T O R S Inductors for power circuits Cl Pb Br Wound metal SPM series RoHS SRVEHCA-CFrHee HaFlroegeen LFereaed SPM6530 type FEATURES Magnetic shield type wound inductor for power circuits using a metallic magnetic material. Compared to ferrite wound type inductors, it is possible to achieve large current, low Rdc, and compactness. Low inductance variance in high-temperature environments with good DC superimposition characteristics. Metallic magnetic material is used, and the structure has an integrated molded coil, so hum noise is lower than with core adhesive coils. Operating temperature range: –40 to +125 °C (including self-temperature rise) APPLICATION Note PCs, HDDs, servers, VRMs, compact power supply modules, other PART NUMBER CONSTRUCTION SPM 6530 T - R25 M - 230 L×W×H dimensions Inductance Inductance Series name Packaging style Internal code 7.1×6.5×3.0 mm (µH) tolerance CHARACTERISTICS SPECIFICATION TABLE L Measuring DC resistance Rated current Part No. frequency Isat Itemp (µH) Tolerance (kHz) (m)max. (m)typ. (A)typ. (A)typ. 0.25 ±20% 100 2.31 2.10 28.5 23.0 SPM6530T-R25M230 0.47 ±20% 100 3.63 3.30 20.5 20.0 SPM6530T-R47M170 0.68 ±20% 100 5.39 4.90 16.6 16.0 SPM6530T-R68M140 1.0 ±20% 100 7.81 7.10 14.1 13.0 SPM6530T-1R0M120 1.5 ±20% 100 10.7 9.70 11.5 11.0 SPM6530T-1R5M100 2.2 ±20% 100 19.1 17.3 8.4 8.2 SPM6530T-2R2M 3.3 ±20% 100 29.7 27.0 7.3 6.8 SPM6530T-3R3M 4.7 ±20% 100 39.4 35.8 6.2 5.6 SPM6530T-4R7M 6.8 ±20% 100 53.3 48.4 4.0 4.0 SPM6530T-6R8M 10 ±20% 100 72.5 65.9 3.8 3.6 SPM6530T-100M Rated current: smaller value of either Isat or Itemp. Isat: When based on the inductance change rate (20% below the initial value) Itemp: When based on the temperature increase (temperature increase of 40°C by self heating) ・The cleaning agent can not be used for these products. Measurement equipment Measurement item Product No. Manufacturer L 4284A Keysight Technologies DC resistance AX-111A ADEX Rated current Isat 4284A+42841A+42842C Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (1/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190308 inductor_commercial_power_spm6530_en.fm

I N D U C T O R S SPM6530 type L FREQUENCY CHARACTERISTICS 50.0 45.0 100M 40.0 35.0 )H 30.0 µ ( e 6R8M nc25.0 a 4R7M ct R47M u20.0 d n I R25M 3R3M 15.0 10.0 2R2M 5.0 1R5M 1R0M R68M 0.0 0.1 1 10 100 Frequency(MHz) Measurement equipment Product No. Manufacturer 4294A Keysight Technologies ＊Equivalent measurement equipment may be used. INDUCTANCE VS. DC BIAS CHARACTERISTICS 10.0 8.0 100M )H 6.0 µ ( e 6R8M c n a ct du 4.0 4R7M n I 3R3M 2.0 2R2M 1R5M 1R0M R68M R47M R25M 0.0 0 10 20 30 40 50 DC current(A) Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (2/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190308 inductor_commercial_power_spm6530_en.fm

I N D U C T O R S SPM6530 type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 7.1±0.3 1.55±0.3 (3.8) 1.55±0.3 2.0±0.5 2.0±0.5 R25 6.5±0.3 3.2±0.3 0 1. ± max. 100 3.0 ø ()0.15 (1.0) Dimensions in mm ø13.0±0.2 16.4+0.2/–0 ø21.2±0.8 22.4max. ø330±2.0 Dimensions in mm TAPE DIMENSIONS 1 1 RECOMMENDED LAND PATTERN Sprocket 0. 0. 1.85 3.7 1.85 0.4±0.05 1.5+–00.1 2.0±0.1 4.0±0.1 hole 1.75± 7.5± 3 0. ± 3.4 3.4 B 6.0 1 Dimensions in mm K Cavity A 12.0±0.1 Dimensions in mm Type A B K SPM6530 7.4±0.1 7.6±0.1 3.6±0.1 PACKAGE QUANTITY RECOMMENDED REFLOW PROFILE Package quantity 1000 pcs/reel Preheating Soldering Natural cooling TEMPERATURE RANGE, INDIVIDUAL WEIGHT Peak 260°C Operating Storage Individual temperature range temperature range weight –40 to +125 °C –40 to +125 °C 0.656 g e 230°C 230°C  Operating temperature range includes self-temperature rise. atur The storage temperature range is for after the assembly. er p m e 180°C T 10s max. 150°C 120s 30s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (3/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190308 inductor_commercial_power_spm6530_en.fm

I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (8) Public information-processing equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment　　 (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro- tection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (4/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190308 inductor_commercial_power_spm6530_en.fm