P o SShieEldRedI ESuSrfaceSS MPPoDDu77n43t RRInductors DASH NUMBER*INDUCTANCE (µH) ±20%TE ST FREQUENCY (kHz)MAXIMDUCM R (OEHSIMSSTA)NCEMAXCIUMRURME (NAT D RCA)TING wer Inductors SERIES SPD73R FERRITE CORE & SLEEVE -122M 1.2 100 0.020 3.40 -242M 2.4 100 0.032 2.69 -352M 3.5 100 0.035 2.60 -472M 4.7 100 0.050 2.15 -682M 6.8 100 0.065 1.90 -103M 10 100 0.067 1.90 -123M 12 1.0 0.080 1.70 -153M 15 1.0 0.091 1.59 -183M 18 1.0 0.14 1.28 -223M 22 1.0 0.19 1.10 -273M 27 1.0 0.21 1.05 -333M 33 1.0 0.24 0.981 -393M 39 1.0 0.32 0.850 -473M 47 1.0 0.36 0.801 -563M 56 1.0 0.47 0.701 -683M 68 1.0 0.52 0.667 -823M 82 1.0 0.69 0.579 -104M 100 1.0 0.79 0.541 -124M 120 1.0 0.84 0.524 -154M 150 1.0 0.89 0.510 -184M 180 1.0 1.45 0.399 -224M 220 1.0 1.65 0.374 Actual Size -274M 270 1.0 2.31 0.316 -334M 330 1.0 2.62 0.297 Physical Parameters -394M 390 1.0 2.94 0.280 -474M 470 1.0 4.18 0.235 Inches Millimeters -564M 560 1.0 4.67 0.222 A 0.287 ± .020 7.3 ± 0.5 -684M 680 1.0 5.73 0.201 B 0.287 ± .020 7.3 ± 0.5 -824M 820 1.0 6.54 0.188 C 0.185 Max. 4.7 Max. (Series SPD74) -105M 1000 1.0 9.44 0.156 C 0.153 Max. 3.9 Max.(Series SPD73) SERIES SPD74R FERRITE CORE & SLEEVE D 0.200 ± 0.020 5.0 ± 0.5 -122M 1.2 100 0.025 4.40 E 0.088 ± 0.020 2.2 ± 0.5 -242M 2.4 100 0.03 4.00 -352M 3.5 100 0.034 3.70 F 0.042 ± 0.020 1.0 ± 0.5 -472M 4.7 100 0.038 3.50 G 0.015 Ref. only 0.38 Ref. only -682M 6.8 100 0.042 3.40 Mechanical Configuration Units designed for surface -103M 10 100 0.049 2.50 mounting; ferrite core and ferrite sleeve -123M 12 1.0 0.058 2.40 -153M 15 1.0 0.081 2.30 Operating temperature range–55°C to +125°C -183M 18 1.0 0.091 2.15 -223M 22 1.0 0.11 2.00 Application Frequency Range -273M 27 1.0 0.15 1.70 Values 1.2µHto10µH to 1.0 MHz Min. -333M 33 1.0 0.17 1.50 Values above 10µH to 300 kHz Min. -393M 39 1.0 0.23 1.35 -473M 47 1.0 0.26 1.30 Current Rating at 25°C Ambient The maximum DC -563M 56 1.0 0.35 1.10 current that will cause a 40°C maximum temperature rise -683M 68 1.0 0.38 1.05 and where the inductance will not decrease by more than -823M 82 1.0 0.43 1.00 10% from its zero DC value -104M 100 1.0 0.61 0.86 -124M 120 1.0 0.66 0.84 Marking For values lower than 10(cid:0)μH the R indicates a -154M 150 1.0 0.88 0.70 decimal point and the remaining digits indicate the -184M 180 1.0 0.98 0.68 inductance in μH. For values 10(cid:0)μH and above, the first -224M 220 1.0 1.17 0.60 two digits indicate the inductance in μH and the third digit -274M 270 1.0 1.64 0.53 indicates the number of trailing zeros where a zero -334M 330 1.0 1.86 0.50 indicates that there are no trailing zeros. -394M 390 1.0 2.85 0.40 -474M 470 1.0 3.01 0.39 Example: SPD73R-122M (1.2(cid:0)μH) -564M 560 1.0 3.62 0.36 1R2 -684M 680 1.0 4.63 0.32 Example: SPD74R-105M (1,000(cid:0)μH) -824M 820 1.0 5.2 0.30 102 -105M 1000 1.0 6.0 0.28 Packaging Tape & reel (16mm): *Complete part # must include series # PLUS the dash # 13" reel, 1000 pieces max.; 7" reel not available For surface finish information, refer to www.delevanfinishes.com Note:No vias and traces in restricted area. 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com 6/2014