P o SShieEldRedI ESuSrfaceSS MPPoDDu11n22t57 InRRductors DASH NUMBER*INDUCTANCE (µH) ±20%TE ST FREQUENCY (kHz)MAXIMDUCM R (OEHSIMSSTA)NCETYPCICUARLR E(ANMTP RSA)TING wer Inductors SERIES SPD125R FERRITE CORE & SLEEVE -222M 2.2 100 0.020 7.00 -332M 3.3 100 0.030 5.50 -472M 4.7 100 0.040 5.00 -682M 6.8 100 0.050 4.50 -103M 10 100 0.055 4.00 -123M 12 1.0 0.060 3.50 -153M 15 1.0 0.065 3.30 -183M 18 1.0 0.070 3.00 -223M 22 1.0 0.075 2.80 -273M 27 1.0 0.085 2.30 -333M 33 1.0 0.095 2.10 -393M 39 1.0 0.105 2.00 Actual Size -473M 47 1.0 0.115 1.80 -563M 56 1.0 0.135 1.60 -683M 68 1.0 0.170 1.50 -823M 82 1.0 0.190 1.40 -104M 100 1.0 0.210 1.30 -124M 120 1.0 0.250 1.10 -154M 150 1.0 0.300 1.00 Top Bottom -184M 180 1.0 0.350 0.90 -224M 220 1.0 0.420 0.80 -274M 270 1.0 0.510 0.75 -334M 330 1.0 0.600 0.70 -394M 390 1.0 0.750 0.65 -474M 470 1.0 0.820 0.60 -564M 560 1.0 1.000 0.55 -684M 680 1.0 1.300 0.50 -824M 820 1.0 1.650 0.45 -105M 1000 1.0 2.000 0.40 Physical Parameters Inches Millimeters SERIES SPD127R FERRITE CORE & SLEEVE A 0.472 ± 0.032 12.0 ± 0.8 B 0.472 ± 0.032 12.0 ± 0.8 -222M 2.2 100 0.015 8.50 C 0.236 Max. 6.0 Max. (Series SPD125) -332M 3.3 100 0.018 7.50 0.315 Max. 8.0 Max. (Series SPD127) -472M 4.7 100 0.022 6.80 D 0.300 ± 0.020 7.6 ± 0.5 -682M 6.8 100 0.030 6.20 E 0.198 ± 0.020 5.0 ± 0.5 -103M 10 100 0.040 5.40 F 0.086 ± 0.020 2.18 ± 0.5 -123M 12 1.0 0.045 4.90 G 0.015 Ref. only 0.38 Ref. only -153M 15 1.0 0.048 4.50 H 0.075 Ref. only 1.91 Ref. only -183M 18 1.0 0.052 3.90 I 0.198 Ref. only 5.03 Ref. only -223M 22 1.0 0.055 3.60 Mechanical Configuration Units designed for surface -273M 27 1.0 0.060 3.40 mounting; ferrite core and ferrite sleeve -333M 33 1.0 0.065 3.00 -393M 39 1.0 0.080 2.80 Operating temperature range –55°C to +125°C -473M 47 1.0 0.100 2.50 Application Frequency Range -563M 56 1.0 0.120 2.30 Values 2.2µHto10µH to 1.0 MHz Min. -683M 68 1.0 0.140 2.10 Values above 10µH to 300 kHz Min. -823M 82 1.0 0.170 1.90 Current Rating at 25°C Ambient The maximum DC current -104M 100 1.0 0.220 1.70 that will cause a 40°C maximum temperature rise and where -124M 120 1.0 0.250 1.60 the inductance will not decrease by more than 10% from its -154M 150 1.0 0.320 1.40 zero DC value -184M 180 1.0 0.360 1.30 -224M 220 1.0 0.390 1.20 Marking For values lower than 10(cid:0)μH the R indicates a decimal point and the remaining digits indicate the inductance -274M 270 1.0 0.520 1.10 in μH. For values 10(cid:0)μH and above, the first two digits indicate -334M 330 1.0 0.620 1.00 the inductance in μH and the third digit indicates the number -394M 390 1.0 0.750 0.90 of trailing zeros where a zero indicates that there are no trailing -474M 470 1.0 0.980 0.80 zeros. -564M 560 1.0 1.150 0.75 -684M 680 1.0 1.220 0.70 Example: SPD125R-222M (2.2(cid:0)μH) -824M 820 1.0 1.400 0.65 2R2 -105M 1000 1.0 1.540 0.62 Example: SPD127R-105M (1,000(cid:0)μH) 102 Packaging Tape & reel (24mm): *Complete part # must include series # PLUS the dash # 13" reel, 500 pieces max.; 7" reel not available For surface finish information, refer to www.delevanfinishes.com Note:No vias and traces in restricted area. 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com 1/2016