SN74LVC86A-Q1 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATE www.ti.com SCAS707B–SEPTEMBER2003–REVISEDFEBRUARY2008 FEATURES 1 • QualifiedforAutomotiveApplications D OR PW PACKAGE • ESDProtectionExceeds2000VPer (TOP VIEW) MIL-STD-883,Method3015;Exceeds200V UsingMachineModel(C=200pF,R=0) 1A 1 14 V CC • OperatesFrom2Vto3.6V 1B 2 13 4B • InputsAcceptVoltagesto5.5V 1Y 3 12 4A • Maxt of4.6nsat3.3V 2A 4 11 4Y pd 2B 5 10 3B • TypicalV (OutputGroundBounce)<0.8V OLP 2Y 6 9 3A atV =3.3V,T =25(cid:176) C CC A GND 7 8 3Y • TypicalV (OutputV Undershoot)>2V OHV OH atV =3.3V,T =25(cid:176) C CC A DESCRIPTION/ORDERING INFORMATION TheSN74LVC86A-Q1quadruple2-inputexclusive-ORgateisdesignedfor2.7-Vto3.6-VV operation. CC ThedeviceperformstheBooleanfunctionY=A¯ BorY=AB+ABinpositivelogic. A common application is as a true/complement element. If one of the inputs is low, the other input is reproduced in true form at the output. If one of the inputs is high, the signal on the other input is reproduced inverted at the output. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in amixed3.3-V/5-Vsystemenvironment. ORDERINGINFORMATION(1) T PACKAGE(2) ORDERABLEPARTNUMBER TOP-SIDEMARKING A SOIC–D Reelof2500 SN74LVC86AQDRQ1 LVC86AQ –40(cid:176) Cto125(cid:176) C TSSOP–PW Reelof2000 SN74LVC86AQPWRQ1 LVC86AQ (1) Forthemostcurrentpackageandorderinginformation,seethePackageOptionAddendumattheendofthisdocument,orseetheTI websiteatwww.ti.com. (2) Packagedrawings,thermaldata,andsymbolizationareavailableatwww.ti.com/packaging. FUNCTIONTABLE (EACHGATE) INPUTS OUTPUT A B Y L L L L H H H L H H H L 1 Pleasebeawarethatanimportantnoticeconcerningavailability,standardwarranty,anduseincriticalapplicationsof TexasInstrumentssemiconductorproductsanddisclaimerstheretoappearsattheendofthisdatasheet. PRODUCTIONDATAinformationiscurrentasofpublicationdate. Copyright©2003–2008,TexasInstrumentsIncorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarilyincludetestingofallparameters.

SN74LVC86A-Q1 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATE www.ti.com SCAS707B–SEPTEMBER2003–REVISEDFEBRUARY2008 EXCLUSIVE-ORLOGIC An exclusive-OR gate has many applications, some of which can be represented better by alternative logic symbols. EXCLUSIVE OR = 1 These five equivalent exclusive-OR symbols are valid for an SN74LVC86A gate in positive logic; negation may be shown at any two ports. LOGIC-IDENTITY ELEMENT EVEN-PARITY ELEMENT ODD-PARITY ELEMENT = 2k 2k + 1 The output is active (low) if The output is active (low) if The output is active (high) if all inputs stand at the same an even number of inputs an odd number of inputs logic level (i.e., A = B). (i.e., 0 or 2) are active. (i.e., only 1 of the 2) are active. Absolute Maximum Ratings(1) overoperatingfree-airtemperaturerange(unlessotherwisenoted) MIN MAX UNIT V Supplyvoltagerange –0.5 6.5 V CC V Inputvoltagerange(2) –0.5 6.5 V I V Outputvoltagerange(2)(3) –0.5 V +0.5 V O CC I Inputclampcurrent V <0 –50 mA IK I I Outputclampcurrent V <0 –50 mA OK O I Continuousoutputcurrent ±50 mA O ContinuouscurrentthroughV orGND ±100 mA CC Dpackage 86 q Packagethermalimpedance(4) (cid:176) C/W JA PWpackage 113 T Storagetemperaturerange –65 150 (cid:176) C stg (1) Stressesbeyondthoselistedunder"absolutemaximumratings"maycausepermanentdamagetothedevice.Thesearestressratings only,andfunctionaloperationofthedeviceattheseoranyotherconditionsbeyondthoseindicatedunder"recommendedoperating conditions"isnotimplied.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmayaffectdevicereliability. (2) Theinputandoutputnegative-voltageratingsmaybeexceedediftheinputandoutputcurrentratingsareobserved. (3) ThevalueofV isprovidedintherecommendedoperatingconditionstable. CC (4) ThepackagethermalimpedanceiscalculatedinaccordancewithJESD51-7. 2 SubmitDocumentationFeedback Copyright©2003–2008,TexasInstrumentsIncorporated ProductFolderLink(s):SN74LVC86A-Q1

SN74LVC86A-Q1 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATE www.ti.com SCAS707B–SEPTEMBER2003–REVISEDFEBRUARY2008 Recommended Operating Conditions(1) MIN MAX UNIT Operating 2 3.6 V Supplyvoltage V CC Dataretentiononly 1.5 V High-levelinputvoltage V =2.7Vto3.6V 2 V IH CC V Low-levelinputvoltage V =2.7Vto3.6V 0.8 V IL CC V Inputvoltage 0 5.5 V I V Outputvoltage 0 V V O CC V =2.7V –12 CC I High-leveloutputcurrent mA OH V =3V –24 CC V =2.7V 12 CC I Low-leveloutputcurrent mA OL V =3V 24 CC Δt/Δv Inputtransitionriseorfallrate 9 ns/V T Operatingfree-airtemperature –40 125 (cid:176) C A (1) AllunusedinputsofthedevicemustbeheldatV orGNDtoensureproperdeviceoperation.RefertotheTIapplicationreport, CC ImplicationsofSloworFloatingCMOSInputs,literaturenumberSCBA004. Electrical Characteristics overrecommendedoperatingfree-airtemperaturerange(unlessotherwisenoted) PARAMETER TESTCONDITIONS V MIN TYP(1) MAX UNIT CC I =–100m A 2.7Vto3.6V V –0.2 OH CC 2.7V 2.2 V I =–12mA V OH OH 3V 2.4 I =–24mA 3V 2.2 OH I =100m A 2.7Vto3.6V 0.2 OL V I =12mA 2.7V 0.4 V OL OL I =24mA 3V 0.55 OL I V =5.5VorGND 3.6V ±5 m A I I I V =V orGND, I =0 3.6V 10 m A CC I CC O ΔI OneinputatV –0.6V, OtherinputsatV orGND 2.7Vto3.6V 500 m A CC CC CC C V =V orGND 3.3V 5 pF i I CC (1) AlltypicalvaluesareatV =3.3V,T =25(cid:176) C. CC A Switching Characteristics overrecommendedoperatingfree-airtemperaturerange(unlessotherwisenoted)(seeFigure1) V =3.3V PARAMETER FROM TO VCC=2.7V C±C0.3V UNIT (INPUT) (OUTPUT) MIN MAX MIN MAX t A Y 5.6 1 4.6 ns pd Operating Characteristics T =25(cid:176) C A TEST VCC=2.5V VCC=3.3V PARAMETER UNIT CONDITIONS TYP TYP C Powerdissipationcapacitancepergate f=10MHz 7.5 8.5 pF pd Copyright©2003–2008,TexasInstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLink(s):SN74LVC86A-Q1

SN74LVC86A-Q1 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATE www.ti.com SCAS707B–SEPTEMBER2003–REVISEDFEBRUARY2008 PARAMETER MEASUREMENT INFORMATION VLOAD From Output RL S1 Open TEST S1 Under Test GND tPLH/tPHL Open (see Note CAL) RL tPLZ/tPZL VLOAD tPHZ/tPZH GND LOAD CIRCUIT INPUTS VCC VI tr/tf VM VLOAD CL RL VD 2.7 V 2.7 V ≤2.5 ns 1.5 V 6 V 50 pF 500 W 0.3 V 3.3 V ± 0.3 V 2.7 V ≤2.5 ns 1.5 V 6 V 50 pF 500 W 0.3 V VI Timing Input VM 0 V tw VI tsu th VI Input VM VM Data Input VM VM 0 V 0 V VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS PULSE DURATION SETUP AND HOLD TIMES VI VI Output Input VM VM Control VM VM 0 V 0 V tPLH tPHL tPZL tPLZ Output VOH Waveform 1 VLOAD/2 Output VM VM VOL (Ss1e ea tN VoLteO ABD) VM VOL + VD VOL tPHL tPLH tPZH tPHZ Output VM VM VOH WSa1v eaOfto uGrtmpNu D2t VM VOH - VD VOH VOL (see Note B) ≈0 V VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES ENABLE AND DISABLE TIMES INVERTING AND NONINVERTING OUTPUTS LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 W . D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure1.LoadCircuitandVoltageWaveforms 4 SubmitDocumentationFeedback Copyright©2003–2008,TexasInstrumentsIncorporated ProductFolderLink(s):SN74LVC86A-Q1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) SN74LVC86AQDRG4Q1 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC86AQ & no Sb/Br) SN74LVC86AQPWRG4Q1 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC86AQ & no Sb/Br) SN74LVC86AQPWRQ1 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC86AQ & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN74LVC86A-Q1 : •Catalog: SN74LVC86A •Enhanced Product: SN74LVC86A-EP •Military: SN54LVC86A NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Enhanced Product - Supports Defense, Aerospace and Medical Applications •Military - QML certified for Military and Defense Applications Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 14-Mar-2013 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) SN74LVC86AQPWRG4Q TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 1 SN74LVC86AQPWRQ1 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 14-Mar-2013 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) SN74LVC86AQPWRG4Q1 TSSOP PW 14 2000 367.0 367.0 35.0 SN74LVC86AQPWRQ1 TSSOP PW 14 2000 367.0 367.0 35.0 PackMaterials-Page2

None

None

None

None

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated