SN54HC245, SN74HC245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SCLS131D − DECEMBER 1982 − REVISED AUGUST 2003 (cid:2) (cid:2) Wide Operating Voltage Range of 2 V to 6 V Typical tpd = 12 ns (cid:2) High-Current 3-State Outputs Drive Bus (cid:2) ±6-mA Output Drive at 5 V Lines Directly or Up To 15 LSTTL Loads (cid:2) Low Input Current of 1 μA Max (cid:2) Low Power Consumption, 80-μA Max I CC SN54HC245...J OR W PACKAGE SN54HC245...FK PACKAGE SN74HC245...DB, DW, N, NS, OR PW PACKAGE (TOP VIEW) (TOP VIEW) C A2 A1 DIRVCOE DIR 1 20 VCC A1 2 19 OE 3 2 1 20 19 A2 3 18 B1 A3 4 18 B1 A3 4 17 B2 A4 5 17 B2 A4 5 16 B3 A5 6 16 B3 A5 6 15 B4 A6 7 15 B4 A6 7 14 B5 A7 8 14 B5 9 10 11 12 13 A7 8 13 B6 A8 9 12 B7 8 D 87 6 A N BB B GND 10 11 B8 G description/ordering information These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. ORDERING INFORMATION ORDERABLE TOP-SIDE TA PACKAGE† PART NUMBER MARKING PDIP − N Tube of 20 SN74HC245N SN74HC245N Tube of 25 SN74HC245DW SSOOIICC − DDWW HHCC224455 Reel of 2000 SN74HC245DWR SOP − NS Reel of 2000 SN74HC245NSR HC245 −4400°°CC ttoo 8855°°CC SSOP − DB Reel of 2000 SN74HC245DBR HC245 Tube of 70 SN74HC245PW TTSSSSOOPP − PPWW Reel of 2000 SN74HC245PWR HHCC224455 Reel of 250 SN74HC245PWT CDIP − J Tube of 20 SNJ54HC245J SNJ54HC245J −55°C to 125°C CFP − W Tube of 85 SNJ54HC245W SNJ54HC245W LCCC − FK Tube of 55 SNJ54HC245FK SNJ54HC245FK †Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Copyright © 2003, Texas Instruments Incorporated Products conform to specifications per the terms of Texas Instruments On products compliant to MIL-PRF-38535, all parameters are tested standard warranty. Production processing does not necessarily include unless otherwise noted. On all other products, production testing of all parameters. processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1

SN54HC245, SN74HC245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SCLS131D − DECEMBER 1982 − REVISED AUGUST 2003 FUNCTION TABLE INPUTS OOPPEERRAATTIIOONN OE DIR L L B data to A bus L H A data to B bus H X Isolation logic diagram (positive logic) 1 DIR 19 OE 2 A1 18 B1 To Seven Other Channels absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V CC Input clamp current, I (V < 0 or V > V ) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA IK I I CC Output clamp current, I (V < 0 or V > V ) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA OK O O CC Continuous output current, I (V = 0 to V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±35 mA O O CC Continuous current through V or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±70 mA CC Package thermal impedance, θJA (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83°C/W Storage temperature range, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C stg †Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

SN54HC245, SN74HC245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SCLS131D − DECEMBER 1982 − REVISED AUGUST 2003 recommended operating conditions (see Note 3) SN54HC245 SN74HC245 UUNNIITT MIN NOM MAX MIN NOM MAX VCC Supply voltage 2 5 6 2 5 6 V VCC = 2 V 1.5 1.5 VVIIHH HHiigghh-lleevveell iinnppuutt vvoollttaaggee VCC = 4.5 V 3.15 3.15 VV VCC = 6 V 4.2 4.2 VCC = 2 V 0.5 0.5 VVIILL LLooww-lleevveell iinnppuutt vvoollttaaggee VCC = 4.5 V 1.35 1.35 VV VCC = 6 V 1.8 1.8 VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V VCC = 2 V 1000 1000 ΔΔtt//ΔΔvv IInnppuutt ttrraannssiittiioonn rriissee//ffaallll ttiimmee VCC = 4.5 V 500 500 nnss VCC = 6 V 400 400 TA Operating free-air temperature −55 125 −40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TA = 25°C SN54HC245 SN74HC245 PPAARRAAMMEETTEERR TTEESSTT CCOONNDDIITTIIOONNSS VVCC MIN TYP MAX MIN MAX MIN MAX UUNNIITT 2 V 1.9 1.998 1.9 1.9 IIOOHH = −2200 μμAA 4.5 V 4.4 4.499 4.4 4.4 VVOOHH VVII = VVIIHH oorr VVIILL 6 V 5.9 5.999 5.9 5.9 VV IOH = −6 mA 4.5 V 3.98 4.3 3.7 3.84 IOH = −7.8 mA 6 V 5.48 5.8 5.2 5.34 2 V 0.002 0.1 0.1 0.1 IIOOLL = 2200 μμAA 4.5 V 0.001 0.1 0.1 0.1 VVOOLL VVII = VVIIHH oorr VVIILL 6 V 0.001 0.1 0.1 0.1 VV IOL = 6 mA 4.5 V 0.17 0.26 0.4 0.33 IOL = 7.8 mA 6 V 0.15 0.26 0.4 0.33 II DIR or OE VI = VCC or 0 6 V ±0.1 ±100 ±1000 ±1000 nA IOZ A or B VO = VCC or 0 6 V ±0.01 ±0.5 ±10 ±5 μA ICC VI = VCC or 0, IO = 0 6 V 8 160 80 μA Ci DIR or OE 2 V to 6 V 3 10 10 10 pF POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3

SN54HC245, SN74HC245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SCLS131D − DECEMBER 1982 − REVISED AUGUST 2003 switching characteristics over recommended operating free-air temperature range, C = 50 pF L (unless otherwise noted) (see Figure 1) FFRROOMM TTOO TA = 25°C SN54HC245 SN74HC245 PPAARRAAMMEETTEERR (INPUT) (OUTPUT) VVCC MIN TYP MAX MIN MAX MIN MAX UUNNIITT 2 V 40 105 160 130 ttppdd AA oorr BB BB oorr AA 4.5 V 15 21 32 26 nnss 6 V 12 18 27 22 2 V 125 230 340 290 tteenn OOEE AA oorr BB 4.5 V 23 46 68 58 nnss 6 V 20 39 58 49 2 V 74 200 300 250 ttddiiss OOEE AA oorr BB 4.5 V 25 40 60 50 nnss 6 V 21 34 51 43 2 V 20 60 90 75 ttt A or B 4.5 V 8 12 18 15 ns 6 V 6 10 15 13 switching characteristics over recommended operating free-air temperature range, C = 150 pF L (unless otherwise noted) (see Figure 1) FFRROOMM TTOO TA = 25°C SN54HC245 SN74HC245 PPAARRAAMMEETTEERR (INPUT) (OUTPUT) VVCC MIN TYP MAX MIN MAX MIN MAX UUNNIITT 2 V 54 135 200 170 ttppdd AA oorr BB BB oorr AA 4.5 V 18 27 40 34 nnss 6 V 15 23 34 29 2 V 150 270 405 335 tteenn OOEE AA oorr BB 4.5 V 31 54 81 67 nnss 6 V 25 46 69 56 2 V 45 210 315 265 ttt A or B 4.5 V 17 42 63 53 ns 6 V 13 36 53 45 operating characteristics, T = 25°C A PARAMETER TEST CONDITIONS TYP UNIT Cpd Power dissipation capacitance per transceiver No load 40 pF 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

SN54HC245, SN74HC245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SCLS131D − DECEMBER 1982 − REVISED AUGUST 2003 PARAMETER MEASUREMENT INFORMATION VCC PARAMETER RL CL S1 S2 From Output PToeisntt RL S1 ten ttPPZZHL 1 kΩ 1550o0 p rpFF COlopseend COlopseend Under Test tPHZ Open Closed (see Note CAL) S2 tdis tPLZ 1 kΩ 50 pF Closed Open 50 pF tpd or tt −− or Open Open 150 pF LOAD CIRCUIT VCC Input 50% 50% 0 V tPLH tPHL In-Phase VOH 90% 90% Output 50% 50% 10% 10% VOL tr tf Output tPHL tPLH Control VCC VOH (Low-Level 50% 50% Out-of-Phase 90% 50% 50% 90% Enabling) 0 V Output 10% 10% VOL tPZL tPLZ tf tr Output ≈VCC ≈VCC Waveform 1 50% VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES (See Note B) 10% VOL tPZH tPHZ 90% 90% VCC Output 90% VOH Input 50% 50% Waveform 2 50% 10% 10% 0 V (See Note B) ≈0 V tr tf VOLTAGE WAVEFORM VOLTAGE WAVEFORMS INPUT RISE AND FALL TIMES ENABLE AND DISABLE TIMES FOR 3-STATE OUTPUTS NOTES: A. CL includes probe and test-fixture capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. D. The outputs are measured one at a time with one input transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5

PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) 5962-8408501VRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8408501VR A SNV54HC245J 5962-8408501VSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8408501VS A SNV54HC245W 84085012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 84085012A SNJ54HC 245FK 8408501RA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 8408501RA SNJ54HC245J 8408501SA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type -55 to 125 8408501SA SNJ54HC245W JM38510/65503BRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 65503BRA JM38510/65503BSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 65503BSA M38510/65503BRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 65503BRA M38510/65503BSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/ 65503BSA SN54HC245J ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 SN54HC245J SN74HC245DBLE OBSOLETE SSOP DB 20 TBD Call TI Call TI -40 to 85 SN74HC245DBR ACTIVE SSOP DB 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245DBRG4 ACTIVE SSOP DB 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245DW ACTIVE SOIC DW 20 25 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245DWE4 ACTIVE SOIC DW 20 25 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245DWG4 ACTIVE SOIC DW 20 25 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) SN74HC245DWR ACTIVE SOIC DW 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245N ACTIVE PDIP N 20 20 Pb-Free CU NIPDAU N / A for Pkg Type -40 to 85 SN74HC245N (RoHS) SN74HC245N3 OBSOLETE PDIP N 20 TBD Call TI Call TI -40 to 85 SN74HC245NE4 ACTIVE PDIP N 20 20 Pb-Free CU NIPDAU N / A for Pkg Type -40 to 85 SN74HC245N (RoHS) SN74HC245NSR ACTIVE SO NS 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245NSRE4 ACTIVE SO NS 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245PW ACTIVE TSSOP PW 20 70 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245PWG4 ACTIVE TSSOP PW 20 70 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245PWLE OBSOLETE TSSOP PW 20 TBD Call TI Call TI -40 to 85 SN74HC245PWR ACTIVE TSSOP PW 20 2000 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245PWRE4 ACTIVE TSSOP PW 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245PWRG4 ACTIVE TSSOP PW 20 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SN74HC245PWT ACTIVE TSSOP PW 20 250 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 85 HC245 & no Sb/Br) SNJ54HC245FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 84085012A SNJ54HC 245FK SNJ54HC245J ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 8408501RA SNJ54HC245J SNJ54HC245W ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type -55 to 125 8408501SA SNJ54HC245W Addendum-Page 2

PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54HC245, SN54HC245-SP, SN74HC245 : •Catalog: SN74HC245, SN54HC245 •Military: SN54HC245 Addendum-Page 3

PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 •Space: SN54HC245-SP NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Military - QML certified for Military and Defense Applications •Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application Addendum-Page 4

PACKAGE MATERIALS INFORMATION www.ti.com 27-Dec-2014 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) SN74HC245DBR SSOP DB 20 2000 330.0 16.4 8.2 7.5 2.5 12.0 16.0 Q1 SN74HC245DWR SOIC DW 20 2000 330.0 24.4 10.8 13.3 2.7 12.0 24.0 Q1 SN74HC245NSR SO NS 20 2000 330.0 24.4 9.0 13.0 2.4 4.0 24.0 Q1 SN74HC245PWR TSSOP PW 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 SN74HC245PWR TSSOP PW 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 SN74HC245PWT TSSOP PW 20 250 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 27-Dec-2014 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) SN74HC245DBR SSOP DB 20 2000 367.0 367.0 38.0 SN74HC245DWR SOIC DW 20 2000 367.0 367.0 45.0 SN74HC245NSR SO NS 20 2000 367.0 367.0 45.0 SN74HC245PWR TSSOP PW 20 2000 364.0 364.0 27.0 SN74HC245PWR TSSOP PW 20 2000 367.0 367.0 38.0 SN74HC245PWT TSSOP PW 20 250 367.0 367.0 38.0 PackMaterials-Page2

None

None

None

None

None

None

None

None

MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,65 0,15 M 0,22 28 15 0,25 0,09 5,60 8,20 5,00 7,40 Gage Plane 1 14 0,25 A 0°–(cid:1)8° 0,95 0,55 Seating Plane 2,00 MAX 0,05 MIN 0,10 PINS ** 14 16 20 24 28 30 38 DIM A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 4040065/E 12/01 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265

None

IMPORTANTNOTICE TexasInstrumentsIncorporatedanditssubsidiaries(TI)reservetherighttomakecorrections,enhancements,improvementsandother changestoitssemiconductorproductsandservicesperJESD46,latestissue,andtodiscontinueanyproductorserviceperJESD48,latest issue.Buyersshouldobtainthelatestrelevantinformationbeforeplacingordersandshouldverifythatsuchinformationiscurrentand complete.Allsemiconductorproducts(alsoreferredtohereinas“components”)aresoldsubjecttoTI’stermsandconditionsofsale suppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitscomponentstothespecificationsapplicableatthetimeofsale,inaccordancewiththewarrantyinTI’sterms andconditionsofsaleofsemiconductorproducts.TestingandotherqualitycontroltechniquesareusedtotheextentTIdeemsnecessary tosupportthiswarranty.Exceptwheremandatedbyapplicablelaw,testingofallparametersofeachcomponentisnotnecessarily performed. TIassumesnoliabilityforapplicationsassistanceorthedesignofBuyers’products.Buyersareresponsiblefortheirproductsand applicationsusingTIcomponents.TominimizetherisksassociatedwithBuyers’productsandapplications,Buyersshouldprovide adequatedesignandoperatingsafeguards. TIdoesnotwarrantorrepresentthatanylicense,eitherexpressorimplied,isgrantedunderanypatentright,copyright,maskworkright,or otherintellectualpropertyrightrelatingtoanycombination,machine,orprocessinwhichTIcomponentsorservicesareused.Information publishedbyTIregardingthird-partyproductsorservicesdoesnotconstitutealicensetousesuchproductsorservicesorawarrantyor endorsementthereof.Useofsuchinformationmayrequirealicensefromathirdpartyunderthepatentsorotherintellectualpropertyofthe thirdparty,oralicensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofsignificantportionsofTIinformationinTIdatabooksordatasheetsispermissibleonlyifreproductioniswithoutalteration andisaccompaniedbyallassociatedwarranties,conditions,limitations,andnotices.TIisnotresponsibleorliableforsuchaltered documentation.Informationofthirdpartiesmaybesubjecttoadditionalrestrictions. ResaleofTIcomponentsorserviceswithstatementsdifferentfromorbeyondtheparametersstatedbyTIforthatcomponentorservice voidsallexpressandanyimpliedwarrantiesfortheassociatedTIcomponentorserviceandisanunfairanddeceptivebusinesspractice. TIisnotresponsibleorliableforanysuchstatements. Buyeracknowledgesandagreesthatitissolelyresponsibleforcompliancewithalllegal,regulatoryandsafety-relatedrequirements concerningitsproducts,andanyuseofTIcomponentsinitsapplications,notwithstandinganyapplications-relatedinformationorsupport thatmaybeprovidedbyTI.Buyerrepresentsandagreesthatithasallthenecessaryexpertisetocreateandimplementsafeguardswhich anticipatedangerousconsequencesoffailures,monitorfailuresandtheirconsequences,lessenthelikelihoodoffailuresthatmightcause harmandtakeappropriateremedialactions.BuyerwillfullyindemnifyTIanditsrepresentativesagainstanydamagesarisingoutoftheuse ofanyTIcomponentsinsafety-criticalapplications. Insomecases,TIcomponentsmaybepromotedspecificallytofacilitatesafety-relatedapplications.Withsuchcomponents,TI’sgoalisto helpenablecustomerstodesignandcreatetheirownend-productsolutionsthatmeetapplicablefunctionalsafetystandardsand requirements.Nonetheless,suchcomponentsaresubjecttotheseterms. NoTIcomponentsareauthorizedforuseinFDAClassIII(orsimilarlife-criticalmedicalequipment)unlessauthorizedofficersoftheparties haveexecutedaspecialagreementspecificallygoverningsuchuse. OnlythoseTIcomponentswhichTIhasspecificallydesignatedasmilitarygradeor“enhancedplastic”aredesignedandintendedforusein military/aerospaceapplicationsorenvironments.BuyeracknowledgesandagreesthatanymilitaryoraerospaceuseofTIcomponents whichhavenotbeensodesignatedissolelyattheBuyer'srisk,andthatBuyerissolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuchuse. TIhasspecificallydesignatedcertaincomponentsasmeetingISO/TS16949requirements,mainlyforautomotiveuse.Inanycaseofuseof non-designatedproducts,TIwillnotberesponsibleforanyfailuretomeetISO/TS16949. Products Applications Audio www.ti.com/audio AutomotiveandTransportation www.ti.com/automotive Amplifiers amplifier.ti.com CommunicationsandTelecom www.ti.com/communications DataConverters dataconverter.ti.com ComputersandPeripherals www.ti.com/computers DLP®Products www.dlp.com ConsumerElectronics www.ti.com/consumer-apps DSP dsp.ti.com EnergyandLighting www.ti.com/energy ClocksandTimers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security PowerMgmt power.ti.com Space,AvionicsandDefense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com VideoandImaging www.ti.com/video RFID www.ti-rfid.com OMAPApplicationsProcessors www.ti.com/omap TIE2ECommunity e2e.ti.com WirelessConnectivity www.ti.com/wirelessconnectivity MailingAddress:TexasInstruments,PostOfficeBox655303,Dallas,Texas75265 Copyright©2014,TexasInstrumentsIncorporated