Product Sample & Technical Tools & Support & Folder Buy Documents Software Community SN54AHCT04,SN74AHCT04 SCLS232O–OCTOBER1995–REVISEDJULY2014 SNx4AHCT04 Hex Inverters 1 Features 3 Description • InputsareTTL-VoltageCompatible The SNx4AHCT04 devices contain six independent 1 inverters. These devices perform the Boolean • Latch-UpPerformanceExceeds250mAPer functionY= A. JESD17 • ESDProtectionExceedsJESD22 DeviceInformation(1) – 2000-VHuman-BodyModel(A114-A) PARTNUMBER PACKAGE BODYSIZE(NOM) – 200-VMachineModel(A115-A) SOIC(14) 8.65mm×3.91mm – 1000-VCharged-DeviceModel(C101) SSOP(14) 6.20mm×5.30mm • OnProductsComplianttoMIL-PRF-38535, SNx4AHCT04 SOP(14) 12.60mm×5.30mm AllParametersAreTestedUnlessOtherwise TSSOP(14) 5.00mm×4.40mm Noted.OnAllOtherProducts,Production VQFN(14) 3.50mm×3.50mm ProcessingDoesNotNecessarilyIncludeTesting (1) For all available packages, see the orderable addendum at ofAllParameters. theendofthedatasheet. 2 Applications • Servers • NetworkSwitches • TelecomInfrastructures • TestsandMeasurements 4 Simplified Schematic A Y 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectualpropertymattersandotherimportantdisclaimers.PRODUCTIONDATA.

SN54AHCT04,SN74AHCT04 SCLS232O–OCTOBER1995–REVISEDJULY2014 www.ti.com Table of Contents 1 Features.................................................................. 1 9.1 Overview...................................................................8 2 Applications........................................................... 1 9.2 FunctionalBlockDiagram.........................................8 3 Description............................................................. 1 9.3 FeatureDescription...................................................8 9.4 DeviceFunctionalModes..........................................8 4 SimplifiedSchematic............................................. 1 10 ApplicationandImplementation.......................... 9 5 RevisionHistory..................................................... 2 10.1 ApplicationInformation............................................9 6 PinConfigurationandFunctions......................... 3 10.2 TypicalApplication..................................................9 7 Specifications......................................................... 4 11 PowerSupplyRecommendations..................... 10 7.1 AbsoluteMaximumRatings......................................4 12 Layout................................................................... 10 7.2 HandlingRatings.......................................................4 12.1 LayoutGuidelines.................................................10 7.3 RecommendedOperatingConditions.......................4 12.2 LayoutExample....................................................10 7.4 ThermalInformation..................................................5 13 DeviceandDocumentationSupport................. 11 7.5 ElectricalCharacteristics...........................................5 7.6 SwitchingCharacteristics,V =5V±0.5V...........5 13.1 RelatedLinks........................................................11 CC 7.7 NoiseCharacteristics................................................6 13.2 Trademarks...........................................................11 7.8 OperatingCharacteristics..........................................6 13.3 ElectrostaticDischargeCaution............................11 7.9 TypicalCharacteristics..............................................6 13.4 Glossary................................................................11 8 ParameterMeasurementInformation..................7 14 Mechanical,Packaging,andOrderable Information........................................................... 11 9 DetailedDescription.............................................. 8 5 Revision History ChangesfromRevisionN(October1995)toRevisionO Page • UpdateddocumenttonewTIdatasheetstandards.............................................................................................................. 1 • DeletedOrderingInformationtable........................................................................................................................................ 1 • AddedMilitaryDisclaimertoFeatureslist.............................................................................................................................. 1 • AddedApplications. ............................................................................................................................................................... 1 • AddedPinFunctionstable...................................................................................................................................................... 3 • AddedHandlingRatingstable. .............................................................................................................................................. 4 • ChangedMAXoperatingtemperatureto125°CinRecommendedOperatingConditionstable. ......................................... 4 • AddedThermalInformationtable........................................................................................................................................... 5 • AddedTypicalCharacteristicssection.................................................................................................................................... 6 • AddedDetailedDescriptionsection........................................................................................................................................ 8 • AddedApplicationandImplementationsection...................................................................................................................... 9 • AddedPowerSupplyRecommendationsandLayoutsections............................................................................................ 10 2 SubmitDocumentationFeedback Copyright©1995–2014,TexasInstrumentsIncorporated ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 www.ti.com SCLS232O–OCTOBER1995–REVISEDJULY2014 6 Pin Configuration and Functions SN54AHCT04...JORWPACKAGE SN74AHCT04...RGYPACKAGE SN54AHCT04...FKPACKAGE SN74AHCT04...D,DB,DGV,N,NS, (TOPVIEW) (TOPVIEW) ORPWPACKAGE C C (TOPVIEW) A C Y A C CA 1 V 1 1 NV 6 1A 1 14 VCC 1 14 3 2 1 20 19 1Y 2 13 6A 1Y 2 13 6A 2A 4 18 6Y 2A 3 12 6Y 2A 3 12 6Y NC 5 17 NC 2Y 4 11 5A 2Y 6 16 5A 2Y 4 11 5A 3A 5 10 5Y NC 7 15 NC 3A 5 10 5Y 3Y 6 9 4A 3A 8 14 5Y 3Y 6 9 4A 9 10 1112 13 7 8 GND 7 8 4Y D Y YD C Y A N 4 3N N 4 4 G G NC−No internal connection PinFunctions PIN SN74AHCT04 SN54AHCT04 I/O DESCRIPTION NAME D,DB,DGV, RGY J,W FK N,NS,PW 1A 1 1 1 2 I 1AInput 1Y 2 2 2 3 O 1YOutput 2A 3 3 3 4 I 2AInput 2Y 4 4 4 6 O 2YOutput 3A 5 5 5 8 I 3AInput 3Y 6 6 6 9 O 3YOutput 4A 9 9 9 13 I 4AInput 4Y 8 8 8 12 O 4YOutput 5A 11 11 11 16 I 5AInput 5Y 10 10 10 14 I 5YOutput 6A 13 13 13 19 I 6AInput 6Y 12 12 12 18 O 6YOutput GND 7 7 7 10 — GroundPin 1 5 7 NC — — — — NoConnection 11 15 17 V 14 14 14 20 — PowerPin CC Copyright©1995–2014,TexasInstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 SCLS232O–OCTOBER1995–REVISEDJULY2014 www.ti.com 7 Specifications 7.1 Absolute Maximum Ratings overoperatingfree-airtemperaturerange(unlessotherwisenoted)(1) MIN MAX UNIT V Supplyvoltagerange –0.5 7 V CC V Inputvoltagerange(2) –0.5 7 V I V Outputvoltagerange(2) –0.5 V +0.5 V O CC I Inputclampcurrent V <0 –20 mA IK I I Outputclampcurrent V <0orV >V ±20 mA OK O O CC I Continuousoutputcurrent V =0toV ±25 mA O O CC ContinuouscurrentthroughV orGND ±50 mA CC (1) StressesbeyondthoselistedunderAbsoluteMaximumRatingsmaycausepermanentdamagetothedevice.Thesearestressratings only,whichdonotimplyfunctionaloperationofthedeviceattheseoranyotherconditionsbeyondthoseindicatedunderRecommended OperatingConditions.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmayaffectdevicereliability. (2) Theinputandoutputvoltageratingsmaybeexceedediftheinputandoutputcurrentratingsareobserved. 7.2 Handling Ratings MIN MAX UNIT T Storagetemperaturerange –65 150 °C stg Humanbodymodel(HBM),perANSI/ESDA/JEDECJS-001,all pins(1) 0 2000 V Electrostaticdischarge V (ESD) Chargeddevicemodel(CDM),perJEDECspecification JESD22-C101,allpins(2) 0 1000 (1) JEDECdocumentJEP155statesthat500-VHBMallowssafemanufacturingwithastandardESDcontrolprocess. (2) JEDECdocumentJEP157statesthat250-VCDMallowssafemanufacturingwithastandardESDcontrolprocess. 7.3 Recommended Operating Conditions overoperatingfree-airtemperaturerange(unlessotherwisenoted)(1) SN54AHCT04 SN74AHCT04 UNIT MIN MAX MIN MAX V Supplyvoltage 4.5 5.5 4.5 5.5 V CC V High-levelinputvoltage 2 2 V IH V Low-levelinputvoltage 0.8 0 0.8 V IL V Inputvoltage 0 5.5 0 5.5 V I V Outputvoltage 0 V 0 V V O CC CC I High-leveloutputcurrent –8 –8 mA OH I Low-leveloutputcurrent 8 8 mA OL Δt/Δv Inputtransitionriseorfallrate 20 20 ns/V T Operatingfree-airtemperature –55 125 –40 125 °C A (1) AllunusedinputsofthedevicemustbeheldatV orGNDtoensureproperdeviceoperation.RefertotheTIApplicationReport, CC ImplicationsofSloworFloatingCMOSInputs,(SCBA004). 4 SubmitDocumentationFeedback Copyright©1995–2014,TexasInstrumentsIncorporated ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 www.ti.com SCLS232O–OCTOBER1995–REVISEDJULY2014 7.4 Thermal Information SN74AHCT04 THERMALMETRIC(1) D DB DGV N NS PW RGY UNIT 14PINS R Junction-to-ambientthermalresistance 101.2 113.1 138.7 61.1 98.6 129.9 63.7 θJA Junction-to-case(top)thermal R 62.3 65.6 60.6 48.0 54.1 58.3 77.6 θJC(top) resistance R Junction-to-boardthermalresistance 55.5 60.4 71.8 41.0 57.4 71.8 39.7 θJB ψ Junction-to-topcharacterization 25.5 25.5 10.6 32.4 19.6 10.2 5.7 °C/W JT parameter Junction-to-boardcharacterization ψ 55.2 59.9 71.1 40.9 57.0 71.2 39.9 JB parameter Junction-to-case(bottom)thermal R n/a n/a n/a n/a n/a n/a 19.9 θJC(bot) resistance (1) Formoreinformationabouttraditionalandnewthermalmetrics,seetheICPackageThermalMetricsapplicationreport,(SPRA953). 7.5 Electrical Characteristics overrecommendedoperatingfree-airtemperaturerange(unlessotherwisenoted) T =25°C SN54AHCT04 SN74AHCT04 A PARAMETER TESTCONDITIONS V UNIT CC MIN TYP MAX MIN MAX MIN MAX I =–50µA 4.4 4.5 4.4 4.4 OH V 4.5V V OH I =–8mA 3.94 3.8 3.8 OH I =50µA 0.1 0.1 0.1 OL V 4.5V V OL I =8mA 0.36 0.44 0.44 OL I V =5.5VorGND 0Vto ±0.1 ±1(1) ±1 µA I I 5.5V I V =V orGND,I =0 5.5V 2 20 20 µA CC I CC O ΔI (2) Oneinputat3.4V, 5.5V 1.35 1.5 1.5 mA CC OtherinputsatV orGND CC C V =V orGND 5V 4 10 10 pF i I CC (1) OnproductscomplianttoMIL-PRF-38535,thisparameterisnotproductiontestedatV =0V. CC (2) ThisistheincreaseinsupplycurrentforeachinputatoneofthespecifiedTTLvoltagelevels,ratherthan0VorV . CC 7.6 Switching Characteristics, V = 5 V ± 0.5 V CC overrecommendedoperatingfree-airtemperaturerange(unlessotherwisenoted)(seeFigure2) FROM TO LOAD TA=25°C SN54AHCT04 SN74AHCT04 PARAMETER (INPUT) (OUTPUT) CAPACITANCE MIN TYP MAX MIN MAX MIN MAX UNIT t 4.7(1) 6.7(1) 1(1) 7.5(1) 1 7.5 PLH A Y C =15pF ns t L 4.7(1) 6.7(1) 1(1) 7.5(1) 1 7.5 PHL t 5.5 7.7 1 8.5 1 8.5 PLH A Y C =50pF ns L t 5.5 7.7 1 8.5 1 8.5 PHL (1) OnproductscomplianttoMIL-PRF-38535,thisparameterisnotproductiontested. Copyright©1995–2014,TexasInstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 SCLS232O–OCTOBER1995–REVISEDJULY2014 www.ti.com 7.7 Noise Characteristics V =5V,C =50pF,T =25°C(1) CC L A SN74AHCT04 PARAMETER UNIT MIN TYP MAX V Quietoutput,maximumdynamicV 0.8 V OL(P) OL V Quietoutput,minimumdynamicV –0.8 V OL(V) OL V Quietoutput,minimumdynamicV 4.7 V OH(V) OH V High-leveldynamicinputvoltage 2 V IH(D) V Low-leveldynamicinputvoltage 0.8 V IL(D) (1) Characteristicsareforsurface-mountpackagesonly. 7.8 Operating Characteristics V =5V,T =25°C CC A PARAMETER TESTCONDITIONS TYP UNIT C Powerdissipationcapacitance Noload, f=1MHz 14 pF pd 7.9 Typical Characteristics 6 5 4 s) n D ( 3 P T 2 1 TPD in ns 0 -100 -50 0 50 100 150 Temperature (qC) D001 Figure1.TPDvsTemperature 6 SubmitDocumentationFeedback Copyright©1995–2014,TexasInstrumentsIncorporated ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 www.ti.com SCLS232O–OCTOBER1995–REVISEDJULY2014 8 Parameter Measurement Information VCC From Output Test From Output RL= 1 kΩ S1 Open TEST S1 UnderTest Point UnderTest GND tPLH/tPHL Open CL CL tPLZ/tPZL VCC (see NoteA) (see NoteA) tPHZ/tPZH GND Open Drain VCC LOAD CIRCUIT FOR LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS 3-STATEAND OPEN-DRAIN OUTPUTS 3 V Timing Input 1.5 V tw 0 V th 3 V tsu 3 V Input 1.5 V 1.5 V Data Input 1.5 V 1.5 V 0 V 0 V VOLTAGEWAVEFORMS VOLTAGEWAVEFORMS PULSEDURATION SETUPAND HOLD TIMES 3 V 3 V Output Input 1.5 V 1.5 V 1.5 V 1.5 V Control 0 V 0 V tPLH tPHL tPZL tPLZ Output VOH Waveform1 ≈VCC InO-Puhtapsuet 50%VCC 50% VCVCOL (seSe1 N aott eV CBC) 50% VCC VOL+0.3V VOL tPHL tPLH tPZH tPHZ Output Out-ofO-Puhtapsuet 50% VCC 50% VCVVCOOHL (WseSae1v eNaftoo GtremN BD2) 50% VCC VOH−0.3VV≈0O HV VOLTAGEWAVEFORMS VOLTAGEWAVEFORMS PROPAGATIONDELAYTIMES ENABLEAND DISABLE TIMES INVERTINGAND NONINVERTING OUTPUTS LOW-AND HIGH-LEVELENABLING NOTES: A. CLincludes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. Allinputpulsesaresuppliedbygeneratorshavingthefollowingcharacteristics: PRR≤1 MHz, ZO= 50Ω, tr≤3ns,tf≤3 ns. D. Theoutputsaremeasuredoneatatimewithoneinputtransitionpermeasurement. E. Allparametersandwaveformsarenotapplicabletoalldevices. Figure2. LoadCircuitandVoltageWaveforms Copyright©1995–2014,TexasInstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 SCLS232O–OCTOBER1995–REVISEDJULY2014 www.ti.com 9 Detailed Description 9.1 Overview The SNx4AHCT04 devices contain six independent inverters. These devices have TTL input levels that allow up translationfrom3.3Vto5V. 9.2 Functional Block Diagram A Y 9.3 Feature Description • V isoptimizedat5V CC • Allowsupvoltagetranslationfrom3.3Vto5V – InputsAcceptV levelsof2V IH • Slowedgeratesminimizeoutputringing • InputsareTTL-voltagecompatible 9.4 Device Functional Modes Table1.FunctionTable (EachInverter) INPUT OUTPUT A Y H L L H 8 SubmitDocumentationFeedback Copyright©1995–2014,TexasInstrumentsIncorporated ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 www.ti.com SCLS232O–OCTOBER1995–REVISEDJULY2014 10 Application and Implementation 10.1 Application Information The SNx4AHCT04 is a low-drive CMOS device that can be used for a multitude of inverting type applications where output ringing is a concern. The low drive and slow edge rates will minimize overshoot and undershoot on the outputs. The input switching levels have been lowered to accommodate TTL inputs of 0.8-V V and 2-V V . IL IH This feature makes it ideal for translating up from 3.3 V to 5 V. Figure 3 and Figure 4 show this type of translation. 10.2 Typical Application Figure3. DrivingRelays 1/6 HCT04 VCC R R a) V I L at the Input turns on the LED b) V I H at the Input turns on the LED Figure4. DrivingLEDs 10.2.1 DesignRequirements This device uses CMOS technology and has balanced output drive. Care should be taken to avoid bus contention because it can drive currents that would exceed maximum limits. The high drive will also create fast edgesintolightloads,soroutingandloadconditionsshouldbeconsideredtopreventringing. 10.2.2 DetailedDesignProcedure 1. Recommendedinputconditions – Risetimeandfalltimespecs:See(Δt/ΔV)intheRecommendedOperatingConditionstable. – SpecifiedHighandlowlevels:See(V andV )intheRecommendedOperatingConditions table. IH IL 2. Recommendoutputconditions – Loadcurrentsshouldnotexceed25mAperoutputand50mAtotalforthepart – OutputsshouldnotbepulledaboveV CC Copyright©1995–2014,TexasInstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 SCLS232O–OCTOBER1995–REVISEDJULY2014 www.ti.com Typical Application (continued) 10.2.3 ApplicationCurves Figure5.UpTranslation 11 Power Supply Recommendations The power supply can be any voltage between the MIN and MAX supply voltage rating located in the RecommendedOperatingConditionstable. Each V pin should have a good bypass capacitor to prevent power disturbance. For devices with a single CC supply, 0.1 μF is recommended. If there are multiple V pins, 0.01 μF or 0.022 μF is recommended for each CC powerpin.Itisacceptabletoparallelmultiplebypasscapstorejectdifferentfrequenciesofnoise.A0.1 μFand1 μF are commonly used in parallel. The bypass capacitor should be installed as close to the power pin as possibleforbestresults. 12 Layout 12.1 Layout Guidelines Whenusingmultiplebitlogicdevicesinputsshouldnoteverfloat. In many cases, functions or parts of functions of digital logic devices are unused, for example, when only two inputs of a triple-input AND gate are used or only 3 of the 4 buffer gates are used. Such input pins should not be left unconnected because the undefined voltages at the outside connections result in undefined operational states. Specified in Figure 6 are the rules that must be observed under all circumstances. All unused inputs of digital logic devices must be connected to a high or low bias to prevent them from floating. The logic level that should be applied to any particular unused input depends on the function of the device. Generally they will be tied to GND or V ; whichever makes more sense or is more convenient. It is generally acceptable to float CC outputs unless the part is a transceiver. If the transceiver has an output enable pin, it will disable the outputs section of the part when asserted. This will not disable the input section of the IOs, so they cannot float when disabled. 12.2 Layout Example V cc Input Unused Input Output Unused Input Output Input Figure6. LayoutDiagram 10 SubmitDocumentationFeedback Copyright©1995–2014,TexasInstrumentsIncorporated ProductFolderLinks:SN54AHCT04 SN74AHCT04

SN54AHCT04,SN74AHCT04 www.ti.com SCLS232O–OCTOBER1995–REVISEDJULY2014 13 Device and Documentation Support 13.1 Related Links The table below lists quick access links. Categories include technical documents, support and community resources,toolsandsoftware,andquickaccesstosampleorbuy. Table2.RelatedLinks TECHNICAL TOOLS& SUPPORT& PARTS PRODUCTFOLDER SAMPLE&BUY DOCUMENTS SOFTWARE COMMUNITY SN54AHCT04 Clickhere Clickhere Clickhere Clickhere Clickhere SN74AHCT04 Clickhere Clickhere Clickhere Clickhere Clickhere 13.2 Trademarks Alltrademarksarethepropertyoftheirrespectiveowners. 13.3 Electrostatic Discharge Caution Thesedeviceshavelimitedbuilt-inESDprotection.Theleadsshouldbeshortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamagetotheMOSgates. 13.4 Glossary SLYZ022—TIGlossary. Thisglossarylistsandexplainsterms,acronyms,anddefinitions. 14 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of thisdocument.Forbrowser-basedversionsofthisdatasheet,refertotheleft-handnavigation. Copyright©1995–2014,TexasInstrumentsIncorporated SubmitDocumentationFeedback 11 ProductFolderLinks:SN54AHCT04 SN74AHCT04

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) 5962-9680401Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962- 9680401Q2A SNJ54AHCT 04FK 5962-9680401QCA ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-9680401QC A SNJ54AHCT04J 5962-9680401QDA ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-9680401QD A SNJ54AHCT04W SN74AHCT04D ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 AHCT04 & no Sb/Br) SN74AHCT04DBR ACTIVE SSOP DB 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 HB04 & no Sb/Br) SN74AHCT04DG4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 AHCT04 & no Sb/Br) SN74AHCT04DGVR ACTIVE TVSOP DGV 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 HB04 & no Sb/Br) SN74AHCT04DR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 AHCT04 & no Sb/Br) SN74AHCT04DRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 AHCT04 & no Sb/Br) SN74AHCT04N ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -40 to 125 SN74AHCT04N & no Sb/Br) SN74AHCT04NSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 AHCT04 & no Sb/Br) SN74AHCT04PW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 HB04 & no Sb/Br) SN74AHCT04PWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 HB04 & no Sb/Br) SN74AHCT04PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 HB04 & no Sb/Br) SN74AHCT04RGYR ACTIVE VQFN RGY 14 3000 Green (RoHS NIPDAU Level-2-260C-1 YEAR -40 to 125 HB04 & no Sb/Br) Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) SN74AHCT04RGYRG4 ACTIVE VQFN RGY 14 3000 Green (RoHS NIPDAU Level-2-260C-1 YEAR -40 to 125 HB04 & no Sb/Br) SNJ54AHCT04FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962- 9680401Q2A SNJ54AHCT 04FK SNJ54AHCT04J ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-9680401QC A SNJ54AHCT04J SNJ54AHCT04W ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-9680401QD A SNJ54AHCT04W (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Addendum-Page 2

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54AHCT04, SN74AHCT04 : •Catalog: SN74AHCT04 •Military: SN54AHCT04 NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Military - QML certified for Military and Defense Applications Addendum-Page 3

PACKAGE MATERIALS INFORMATION www.ti.com 20-Dec-2018 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) SN74AHCT04DGVR TVSOP DGV 14 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74AHCT04DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74AHCT04PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74AHCT04RGYR VQFN RGY 14 3000 330.0 12.4 3.75 3.75 1.15 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 20-Dec-2018 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) SN74AHCT04DGVR TVSOP DGV 14 2000 367.0 367.0 35.0 SN74AHCT04DR SOIC D 14 2500 367.0 367.0 38.0 SN74AHCT04PWR TSSOP PW 14 2000 367.0 367.0 35.0 SN74AHCT04RGYR VQFN RGY 14 3000 367.0 367.0 35.0 PackMaterials-Page2

None

None

None

None

None

None

MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,23 0,40 0,07 M 0,13 24 13 0,16 NOM 4,50 6,60 4,30 6,20 Gage Plane 0,25 0°–(cid:1)8° 0,75 1 12 0,50 A Seating Plane 0,15 1,20 MAX 0,08 0,05 PINS ** 14 16 20 24 38 48 56 DIM A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 4073251/E 08/00 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. D. Falls within JEDEC: 24/48 Pins – MO-153 14/16/20/56 Pins – MO-194 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265

None

MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,65 0,15 M 0,22 28 15 0,25 0,09 5,60 8,20 5,00 7,40 Gage Plane 1 14 0,25 A 0°–(cid:1)8° 0,95 0,55 Seating Plane 2,00 MAX 0,05 MIN 0,10 PINS ** 14 16 20 24 28 30 38 DIM A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 4040065/E 12/01 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265

None

PACKAGE OUTLINE J0014A CDIP - 5.08 mm max height SCALE 0.900 CERAMIC DUAL IN LINE PACKAGE PIN 1 ID A 4X .005 MIN (OPTIONAL) [0.13] .015-.060 TYP [0.38-1.52] 1 14 12X .100 [2.54] 14X .014-.026 14X .045-.065 [0.36-0.66] [1.15-1.65] .010 [0.25] C A B .754-.785 [19.15-19.94] 7 8 B .245-.283 .2 MAX TYP .13 MIN TYP [6.22-7.19] [5.08] [3.3] SEATING PLANE C .308-.314 [7.83-7.97] AT GAGE PLANE .015 GAGE PLANE [0.38] 0 -15 14X .008-.014 TYP [0.2-0.36] 4214771/A 05/2017 NOTES: 1. All controlling linear dimensions are in inches. Dimensions in brackets are in millimeters. Any dimension in brackets or parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This package is hermitically sealed with a ceramic lid using glass frit. 4. Index point is provided on cap for terminal identification only and on press ceramic glass frit seal only. 5. Falls within MIL-STD-1835 and GDIP1-T14. www.ti.com

EXAMPLE BOARD LAYOUT J0014A CDIP - 5.08 mm max height CERAMIC DUAL IN LINE PACKAGE (.300 ) TYP [7.62] SEE DETAIL B SEE DETAIL A 1 14 12X (.100 ) [2.54] SYMM 14X ( .039) [1] 7 8 SYMM LAND PATTERN EXAMPLE NON-SOLDER MASK DEFINED SCALE: 5X .002 MAX (.063) [0.05] [1.6] METAL ALL AROUND ( .063) SOLDER MASK [1.6] OPENING METAL .002 MAX SOLDER MASK (R.002 ) TYP [0.05] OPENING [0.05] ALL AROUND DETAIL A DETAIL B SCALE: 15X 13X, SCALE: 15X 4214771/A 05/2017 www.ti.com

None

None

None

None

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated