S E I R E S S M S Quick Mating

SMS Series | Quick Mating Range overview SMS...RDH1/SMS...RDH3 Cable receptacle with strain relief hood SMS...PDH1/SMS...PDH3 Cable plug with strain relief hood SMS...GE3-GE4/SMS...SE3-SE4 SMS...GE33/SMS...GE43 Straight board mount SMS...GE5-SE5/SMS...GE6-SE6 SMS...GE53/SMS...GE63 Right angle board mount SMS...R1/ SMS...R3 Panel mount receptacle SMS...P1/SMS...PD3 Cable plug without strain relief hood SMS...RD3 Cable receptacle without strain relief hood 3

SMS Series | Quick Mating Contacts layout SMS 2 SMS 3 SMS 4 SMS 6 SMS 9 SMS 12 SMS 15 SMS 18 SMS 24 SMS 36 Contact identifications shown are for mating face. Contact identifications of wiring face are identical as shown on the receptacle arrangements 4

SMS Series | Quick Mating Quick Mating panel and cable connectors Description The versatile and easy to use “SMS” Quick Mating panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more interconnection solutions and techniques. A full plastic solution offered in either Wire attachment or PCB mounting options to provide rapid assembly/installation without requiring additional mounting hardware. Panel receptacle connectors simply snap and lock into panel cut-outs and cable plugs quickly connect and disconnect with positive retention locks. Just push to mate then press and release to un-mate. In addition, cable plug connectors also feature pin-protection skirts, positive polarization and are offered with or without integrated strain relief hoods. Cable receptacle connectors (with integrated strain relief hoods) are available to mate with the cable plug connectors for cable- to-cable solutions when needed. These multi-way connectors accept the Size 16 TRIM TRIO (1.6mm) diameter contacts and are available with 10 contact arrangements from 2 Environmental Material to 36 positions. • Operating temperature: -55°C to +105°C • Connector: Polyamide 6.6 • Insulation resistance: 5000 MΩ min. • Flammability rating: UL94 V2 (Black) or Features and benefits • Test potential: 2000 VAC UL94 V0 (White). • Available in 10 contact arrangements • Durability: 500 matings and unmatings The white version is also I3F2/I2F3 according • Self mountable panel receptacle with • Sealing performances: IP40 to the NFF 16101 /16102 (Fire & fume positive housing retention • Electrical performances: standard for French rail market) and • Cable plugs with retaining latches for UL: 250V - 10A R23/HL3 following EN 45 545 positive locking CSA: 250V - 15A • Cable plug has pin protection skirt to prevent damage of male contacts Wire insulation acceptance Contact • Positive polarization keys prevent mismating • SMS PDH1, RDH1, PD3, PDH3, RD3, RDH3 • “SMS” Quick Mating connectors accept • Cable plug and receptacle have integrated max: 3.2mm TRIM TRIO size 16 removable snap-lock strain relief hood which can accept a wide • SMS R1, P1, R3 max: 4.19mm contacts (see contact section) range of cables • Contacts to be ordered seperately. • Cable plug and receptacle have discrimination cavities in between contact cavities, thus offering discrimination without contact loss. See instruction page 21. • UL recognized File Nr.: E238675 • CSA certififed File Nr.: LR44961-21 Ordering information Connector family SMS 12 PDH3 Layout: see next page Body variation: R1: (UL94 V2) Panel mount receptacle - Black R3: (UL94 V0) Panel mount receptacle - White P1: (UL94 V2) Cable plug without strain relief hood - Black PD3: (UL94 V0) Cable plug without strain relief hood - White PDH1: (UL94 V2) Cable plug with integrated strain relief hood - Black PDH3: (UL94 V0) Cable plug with integrated strain relief hood - White RD3: (UL94 V0) Cable receptacle without integrated strain relief hood - White RDH1: (UL94 V2) Cable receptacle with integrated strain relief hood - Black RDH3: (UL94 V0) Cable receptacle with integrated strain relief hood - White 5

SMS Series | Quick Mating Connectors Panel mount receptacle without discrimination cavities (wire acceptance: 4.19mm) 25.0 A J 0.75 2.3 B K 13.2 Part number Nbr. of contact* A B C max. J K Black UL94 V2 White UL94 V0 SMS2R1 SMS2R3 2 11.0 11.4 SMS3R1 SMS3R3 3 16.2 5.8 15.2 16.5 11.6 SMS4R1 SMS4R3 4 21.1 21.7 SMS6R1 SMS6R3 6 10.9 20.3 16.7 16.5 SMS9R1 SMS9R3 9 16.0 25.4 21.6 SMS12R1 SMS12R3 12 16.2 21.1 30.5 26.7 SMS15R1 SMS15R3 15 26.2 35.6 16.7 31.8 SMS18R1 SMS18R3 18 31.2 40.6 36.9 SMS24R1 SMS24R3 24 21.2 21.7 SMS36R1 SMS36R3 36 46.6 21.1 30.5 47.1 26.7 *Contacts supplied separately Cable plug without strain relief hood & without discrimination cavities (wire acceptance: 4.19mm) 32.9 A x. a m B 25.0 Part number Nbr. of contact* A C max. Black UL94 V2 SMS2P1 2 15.0 SMS3P1 3 18.6 17.8 SMS4P1 4 23.7 SMS6P1 6 22.9 SMS9P1 9 27.9 SMS12P1 12 18.6 33.0 SMS15P1 15 38.1 SMS18P1 18 43.2 SMS24P1 24 23.7 SMS36P1 36 49.1 33.0 *Contacts supplied separately Note: all dimensions are in mm 6

SMS Series | Quick Mating Cable receptacle without strain relief hood & with discrimination cavities 25.0 Contact cavity Discrimation E cavity x. a m C B D Part number Nbr. of discrimi- Nbr. of contact* B max C D E White UL94 V0 nation cavities SMS2RD3 2 0 11.1 14.1 SMS3RD3 3 0 9.9 8.4 16.2 18.6 SMS4RD3 4 0 21.2 23.7 SMS6RD3 6 2 15.0 13.4 SMS9RD3 9 4 20.0 18.5 SMS12RD3 12 6 25.1 23.6 16.2 18.6 SMS15RD3 15 8 30.2 28.7 SMS18RD3 18 10 35.3 33.8 SMS24RD3 24 15 21.2 23.7 SMS36RD3 36 24 25.1 23.6 46.6 49.1 *Contacts supplied separately Cable plug without strain relief hood & with discrimination cavities 32.7 Contact cavity Discrimation cavity x. a m C B D Part number Nbr. of discrimi- Nbr. of contact* B max. C D White UL94 V0 nation cavities SMS2PD3 2 0 14.1 SMS3PD3 3 0 16.4 8.4 18.6 SMS4PD3 4 0 23.7 SMS6PD3 6 2 21.5 13.4 SMS9PD3 9 4 26.7 18.5 SMS12PD3 12 6 31.7 23.6 18.6 SMS15PD3 15 8 36.7 28.7 SMS18PD3 18 10 41.8 33.8 SMS24PD3 24 15 23.7 SMS36PD3 36 24 31.7 23.6 49.1 *Contacts supplied separately Note: all dimensions are in mm 7

SMS Series | Quick Mating Connectors (Continued) Cable receptacle with integrated strain relief hood Contact cavity Discrimation Cable A cavity range B H C D Part number Nbr. of Nbr. of discrimi- Cable Cable A B C D H Black UL94 V2 White UL94 V0 contact* nation cavities range (mm) tie (1) SMS2RDH1 SMS2RDH3 2 0 31.6 11.1 0.5 0.5-8.4 SMS3RDH1 SMS3RDH3 3 0 35.1 9.9 69.0 16.2 49.2 0.8-7.3 TF4D SMS4RDH1 SMS4RDH3 4 0 38.2 74.4 21.2 1.5-10 SMS6RDH1 SMS6RDH3 6 2 34.6 15.0 72.6 50.9 1.7-9.2 SMS9RDH1 SMS9RDH3 9 4 35.8 20.0 75.3 52.2 3.9-14.2 SMS12RDH1 SMS12RDH3 12 6 38.1 25.1 72.0 16.2 52.7 4.0-15.0 SMS15RDH1 SMS15RDH3 15 8 35.9 30.2 5.0-16.2 81.3 55.2 TF5D SMS18RDH1 SMS18RDH3 18 10 36.1 5.8-20.3 35.3 SMS24RDH1 SMS24RDH3 24 15 39.7 90.4 21.2 57.2 7.1-20.4 SMS36RDH1 SMS36RDH3 36 24 54.6 25.1 128.0 46.6 63.3 8.8-24.5 *Contacts supplied separately (1) Cable tie not included Cable plug with integrated strain relief hood Cable A Contact cavity Discrimation range cavity B H D C Part number Nbr. of Nbr. of discrimi- Cable Cable A B C D H Black UL94 V2 White UL94 V0 contact* nation cavities range (mm) tie (1) SMS2PDH1 SMS2PDH3 2 0 39.5 64.8 14.1 0.5-8.4 SMS3PDH1 SMS3PDH3 3 0 43.0 16.4 69.0 18.6 57.1 0.8-7.3 TF4D SMS4PDH1 SMS4PDH3 4 0 46.1 74.4 23.7 1.5-10 SMS6PDH1 SMS6PDH3 6 2 42.5 21.5 72.6 58.8 1.7-9.2 SMS9PDH1 SMS9PDH3 9 4 43.7 26.7 75.3 60.1 3.9-14.2 SMS12PDH1 SMS12PDH3 12 6 46.0 31.7 72.0 18.6 60.6 4.0-15.0 SMS15PRDH1 SMS15PDH3 15 8 43.8 36.7 5.0-16.2 81.3 63.1 TF5D SMS18PDH1 SMS18PDH3 18 10 44.0 5.8-20.3 41.8 SMS24PDH1 SMS24PDH3 24 15 47.6 90.4 23.7 65.1 7.1-20.4 SMS36PDH1 SMS36PDH3 36 24 62.5 31.7 128.0 49.1 71.2 8.8-24.5 *Contacts supplied separately (1) Cable tie not included Note: all dimensions are in mm 8

SMS Series | Quick Mating Accessories for standard Quick Mating connectors Pin protection shroud for panel mount receptacle A 23.5 B When pins are inserted into the panel mount Part number Nbr. of contact receptacle half (SMS...R1) of the Quick Mating A B connector, an optional pin protection shroud Black UL94 V2 position can be installed. SMS2CSB1 2 19.8 The shroud is mounted at the same time as SMS3CSB1 3 23.4 18.8 the receptacle by holding the shroud against the mating side of the panel with both cut- SMS4CSB1 4 28.4 outs lined up. The receptacle is then inserted SMS6CSB1 6 23.9 in place, trapping the shroud between the SMS9CSB1 9 29.0 receptacle and panel. The use of the pin protection shroud reduces the allowable SMS12CSB1 12 23.4 34.0 thickness of the panel from 2.3 to 1.6 mm max. SMS15CSB1 15 39.1 SMS18CSB1 18 44.2 SMS24CSB1 24 28.4 SMS36CSB1 36 54.1 34.0 Strain relief hoods Part number Nbr. of contact Black UL94 V2 position SMS2H1 2 SMS3H1 3 SMS4H1 4 SMS6H1 6 For SMS2H1, SMS3H1, SMS4H1 2 pieces are needed for a SMS9H1 9 & SMS6H1 complete hool for SMS9H1 to SMS36H1 SMS12H1 12 SMS15H1 15 Separate strain relief hoods are available for all standard plugs SMS...P1. The hoods consist of identical halves that snap into position on the plug SMS18H1 18 and are secured in place with the cable tie drawn tightly around the cable SMS24H1 24 entry collar. SMS36H1 36 The cable tie is not included (TF4D – TF5D). Two, three and four position hoods are single piece units. Discrimination pins For discrimination pins on both standard Quick Mating and Quick Mating Pin Headers cable and board mount: See accessories section. Note: all dimensions are in mm 9

SMS Series | Quick Mating Contact Selector Guide Contact supplied separately Electrical characteristics: contact resistance Available platings (contact supplied separately) Machined < 3mΩ J Gold fl ash over 2μ Ni #16 K Min 0.4μ gold over 2μ Ni Ø1.6mm Stamped & Formed < 6mΩ Active part: Gold fl ash over Ni S31 Crimp area: Nickel Active part: 0.75μ gold min over 2μ Ni S18 Crimp area: 1.3μ tin over Ni Other: Nickel TK6 2-5μ Sn pre-plated D70 Superseded by S31 S6 Superseded by S18 Other platings on request (contact supplied separately) T: 2μm Ni mini all over + T 3 to 5 μm Sn all over D28 0.75μ gold over Ni Packaging Due to the wide variety of applications, contact packaging is offered for small series (bulk package) and high volume production (reeled contacts): Size contacts #16 (Ø1.6mm) • 25 pieces loose package • 50 pieces bulk package • 1,000 pieces • 3,000 pieces reeled • 2,000 pieces reeled (Stamped & Formed (Machined contacts) bulk package (Stamped & Formed (Machined contacts) contacts) (Machined contacts) contacts) 10

SMS Series | Quick Mating Crimp Contacts Standard Version Contact Wire size Part number Max Max Available Type size AWG mm² Male Female wire Ø insulator Ø plating Machined 30-28 0.05-0.08 RM28M1- RC28M1- 0.55 1.1 K, J Machined 26-24 0.13-0.2 RM24M9- RC24M9- 0.8 1.6 K, J Stamped & SM24M1-(1) SC24M1-(1) Insulation 26-24 0.13-0.25 0.89-1.28 S31, S18, TK6 Formed SM24ML1-(2) SC24ML1-(2) grip RM20M13- RC20M13- 1.8 Machined 22-20 0.32-0.52 1.18 K, J RM20M12- RC20M12- 2.2 Stamped & SM20M1-(1) SC20M1-(1) Insulation 22-20 0.35-0.5 1.17-2.08 S31, S18, TK6 #16 Formed SM20ML1-(2) SC20ML1-(2) grip Ø1.6 mm Machined 20-16 0.52-1.5 RM16M23- RC16M23- 1.8 3.2 K, J Stamped & SM16M1-(1) SC16M1-(1) No insulation 18-16 0.8-1.5 3.0 S31, S18, TK6 Formed SM16ML1-(2) SC16ML1-(2) grip Stamped & SM16M11-(1) SC16M11-(1) Insulation 18-16 0.8-1.5 2.0-3.0 S31, S18, TK6 Formed SM16ML11-(2) SC16ML11-(2) grip Machined 16-14 1.5-2.5 RM14M30- RC14M30- 2.28 3.2 K, J Stamped & SM14M1-(1) SC14M1-(1) No insulation 14 2.0-2.5 3.2 S31, S18, TK6 Formed SM14ML1-(2) SC14ML1-(2) grip (1) contact reeled (2) loose contact Note: all dimensions are in mm Exemple: RM20M13K - Size #16, Machined, AWG20 wire. Tooling Crimp Tool Table Standard contacts Contact size Part number Head* Handles* Extraction tools RM/RC 28M1* RM/RC 24M9* S16RCM20 RM/RC 20M13* RM/RC 20M12* RM/RC 16M23* S16RCM16 #16 RM/RC 14M30* S16RCM14 SHANDLES RX2025GE1 Ø1.6 mm SM/SC 24ML1*(1) S16SCM20 SM/SC 20ML1*(1) SM/SC 16ML1*(1) S16SCML1 SM/SC 14ML1*(1) SM/SC 16ML11*(1) S16SCML11 (1) loose contact * endurance of SHANDLES & Head tools = 50,000 cycles 11

SMS Series | Quick Mating Notes 12

SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Quick Mating PC board mount connectors Description These PC board mount connectors enable Quick Mating and preassembled TRIM TRIO contacts to be PC board mounted, using conventional solder production techniques. They will then mate and latch with the standard Quick Mating plugs. Straight board mount connectors is available in 10 insert arrangements from 2 to 36 positions. Right angled board mount Quick Mating is available in 3, 6, 12 and 18 positions. • Test potential: 2000 VAC thickness (right contacts) All board mount connectors are supplied fully • Current rating for SMS PCB version: K9 (std) = Min. 0.4μ Gold in contact area, loaded with pin or socket contacts, either - 5 Amp for stamped and formed contacts Tin on solder tail, over Nickel in solid machined or stamped and formed - 7.5 Amp for machined contacts J9 = Gold fl ash in contact area, contacts. • Electrical performances for crimped versions: Tin on solder tail, over Nickel Stamped and formed contact have selective tin UL: 250V - 15A T = 3 - 5μ Tin all over plating on the solder tails, thus eliminating flux CSA: 250V - 15A operations. • Durability: 500 matings and unmatings • Plating for Stamped and formed contacts: • Sealing performances: IP40 - Made for 2.4mm PCB thickness (straight contacts) and for 3.2mm PCB thickness Features and benefits (right contacts) • Straight versions available in 10 contact K9 = Min. 0.4μ Gold in contact area, Material arrangements from 2 to 36 positions 3- 5μ Tin on solder tail, over Nickel • Right angled versions available in 3, 6, 12 • Connector body: T = 3 - 5μ Tin all over and 18 positions. Glass filled thermoplast UL94 V0 - Made for 3.2mm PCB thickness (straight contacts) • All versions are available with: • Railway version : S6 = Min. 0.75μ Gold in contact area - Pin or socket contacts I2 F3 according to NF F 16-101 Gold fl ash on solder tail, over Nickel - Stamped and formed or solid machined HL2/R23 according to EN 45 545 D70 = Gold fl ash all over contacts. • Contacts: TR29 = 3 - 5μ Tin all over • Board mount connectors have discrimination High conductive copper alloy cavities in between contact cavities, unless • Soldering information: Intermateability other wise noted.See instruction page 21. compatible with wave soldering up to 245°C. • UL recognized File Nr.: E238675 Not compatible with reflow soldering. • “SMS” Quick Mating board mount • CSA certififed File Nr.: LR44961-21 connectors with preassembled TRIM TRIO Plating table size 16 board mount contacts are intermateable only with the “SMS” Quick Environmental • Plating for solid machined contacts: Mating cable plug connectors equipped • Operating temperature: -55°C to +105°C - Made for 2.4mm or 3.2mm PCB thickness with TRIM TRIO crimp type removable • Insulation resistance: 5000 MΩ min. (straight contacts) and for 3.2mm PCB snap-lock contacts (see contact section). Ordering information Connector family SMS 12 GE 3 0 K9 Layout: see page 14 Body variation: GE: Solid machined contacts (2.4mm or 3.2mm, see option below) SE: Stamped and formed contacts for 2.4mm PCB RE: Stamped and formed contacts for 3.2mm PCB Design variation: 3: Straight board mount with female contact 4: Straight board mount with male contacts 5: Right angle board mount with female contacts 6: Right angle board mount with male contacts Option: -: 2.4mm for GE3, GE4 and SE variation 0: 3.2mm for GE variation 3: Railway version: I2 F3 according to NF F 16-101 and HL2/R23 a cording to EN 45 545 Plating indication 13

SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Connectors Straight board mount with female contacts 7.0 E PCB tail length 8 0. Ø A 5 .0 9 8 5. 5.08 2.4 Ø3.5 B D Dimensions Nbr. of discrimination Nbr. of contact A B C D E cavities 2 0 11.0 - 19.1 3 0 16.2 10.2 5.9 14.0 4 0 21.3 15.2 6 0 19.2 10.9 9 4 24.2 16.0 13.4 12 0 16.2 29.2 10.2 21.1 15 8 34.3 26.1 18 10 39.4 31.2 24 0 21.2 15.2 36 0 46.5 15.2 54.6 20.9 Contacts type Part number Standard version NFF certifi ed version Solid machined contacts Stamped & formed contacts Solid machined contacts PCB thickness 2.4mm PCB thickness 3.2mm PCB thickness 2.4mm PCB thickness 3.2mm PCB thickness 2.4mm PCB tail length 3.4mm PCB tail length 4.2mm PCB tail length 3.4mm PCB tail length 4.4mm PCB tail length 3.4mm SMS2GE3* SMS2GE30* SMS2SE3* SMS2RE3* - SMS3GE3* SMS3GE30* SMS3SE3* SMS3RE3* SMS3GE33* SMS4GE3* SMS4GE30* SMS4SE3* SMS4RE3* - SMS6GE3* SMS6GE30* SMS6SE3* SMS6RE3* SMS6GE33* SMS9GE3* SMS9GE30* SMS9SE3* SMS9RE3* SMS9GE33* SMS12GE3* SMS12GE30* SMS12SE3* SMS12RE3* SMS12GE33* SMS15GE3* SMS15GE30* SMS15SE3* SMS15RE3* SMS15GE33* SMS18GE3* SMS18GE30* SMS18SE3* SMS18RE3* SMS18GE33* SMS24GE3* SMS24GE30* SMS24SE3* SMS24RE3* SMS24GE33* SMS36GE3* SMS36GE30* SMS36SE3* SMS36RE3* SMS36GE33* * for coding see page 11 Example: SMS12GE3J9 - SMS with 12 solid machined contacts, plating J9 Note: all dimensions are in mm 14

SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Straight board mount with male contacts 7.0 E PCB tail length 8 0. Ø 5 C A .0 9 8 5. 5.08 2.4 Ø3.5 B D 7.0 Dimensions Nbr. of discrimination Nbr. of contact A B C D E cavities 2 0 11.1 - 19.1 3 0 16.2 10.2 5.9 14.0 4 0 21.3 15.2 6 0 19.2 10.9 9 4 24.2 16.0 13.4 12 0 16.2 29.2 10.2 21.1 15 8 34.3 26.1 18 10 39.4 31.2 24 0 21.2 15.2 36 0 46.5 15.2 54.6 20.9 Contacts type Part number Standard version NFF certifi ed version Solid machined contacts Stamped & formed contacts Solid machined contacts PCB thickness 2.4mm PCB thickness 3.2mm PCB thickness 2.4mm PCB thickness 3.2mm PCB thickness 2.4mm PCB tail length 3.4mm PCB tail length 4.2mm PCB tail length 3.4mm PCB tail length 4.4mm PCB tail length 3.4mm SMS2GE4* SMS2GE40* SMS2SE4* SMS2RE4* - SMS3GE4* SMS3GE40* SMS3SE4* SMS3RE4* SMS3GE43* SMS4GE4* SMS4GE40* SMS4SE4* SMS4RE4* - SMS6GE4* SMS6GE40* SMS6SE4* SMS6RE4* SMS6GE43* SMS9GE4* SMS9GE40* SMS9SE4* SMS9RE4* SMS9GE43* SMS12GE4* SMS12GE40* SMS12SE4* SMS12RE4* SMS12GE43* SMS15GE4* SMS15GE40* SMS15SE4* SMS15RE4* SMS15GE43* SMS18GE4* SMS18GE40* SMS18SE4* SMS18RE4* SMS18GE43* SMS24GE4* SMS24GE40* SMS24SE4* SMS24RE4* SMS24GE43* SMS36GE4* SMS36GE40* SMS36SE4* SMS36RE4* SMS36GE43* * for coding see page 11 Example: SMS12GE4J9 - SMS with 12 solid machined contacts, plating J9 Note: all dimensions are in mm 15

SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Connectors (Continued) Right angle board mount with female contacts E F B 5 G A 2. 4 Ø0.8 5.08 16.5 .5 3x5.08 Ø3.4 D Dimensions Nbr. of discrimination Nbr. of contact A B C D E F G cavities 3 0 16.5 20.5 6.8 30.2 24.2 16.2 6 0 19.0 24.5 11.9 14.4 12 6 35.2 29.2 21.2 21.6 29.5 17.2 18 10 45.4 39.4 31.2 Contacts type Part number Standard version NFF certifi ed version Solid machined contacts Stamped & formed contacts Solid machined contacts PCB thickness 3.2mm PCB thickness 3.2mm PCB thickness 3.2mm PCB tail length 4.5mm PCB tail length 4.5mm PCB tail length 4.5mm SMS3GE5* SMS3SE5* SMS3GE53* SMS6GE5* SMS6SE5* SMS6GE53* SMS12GE5* SMS12SE5* SMS12GE53* SMS18GE5* SMS18SE5* SMS18GE53* * for coding see page 11 Example: SMS12GE5J9 - SMS with 12 solid machined contacts, plating J9 Note: all dimensions are in mm 16

SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Right angle board mount with male contacts F E B 2.5 G A 4 .5 Ø0.8 5.08 16.5 3x5.08 Dimensions Ø3.4 D Nbr. of discrimination Nbr. of contact A B C D E F G cavities 3 0 16.5 20.5 6.8 30.2 24.2 16.2 6 0 19.0 24.5 11.9 14.4 12 6 35.2 29.2 21.2 21.6 29.5 17.2 18 10 45.4 39.4 31.2 Contacts type Part number Standard version NFF certifi ed version Solid machined contacts Stamped & formed contacts Solid machined contacts PCB thickness 3.2mm PCB thickness 3.2mm PCB thickness 3.2mm PCB tail length 4.5mm PCB tail length 4.5mm PCB tail length 4.5mm SMS3GE6* SMS3SE6* SMS3GE63* SMS6GE6* SMS6SE6* SMS6GE63* SMS12GE6* SMS12SE6* SMS12GE63* SMS18GE6* SMS18SE6* SMS18GE63* * for coding see page 11 Example: SMS12GE6J9 - SMS with 12 solid machined contacts, plating J9 Note: all dimensions are in mm 17

SMS Series | Board mount Quick Mating (Pitch: 5.08mm) Drilling Pattern Dimensions Straight angle board mount 2 contacts 3 contacts 4 contacts 6 contacts 9 contacts 0 0 19.0 14. 14. 19.0 4.1 2 10.2 15.2 10.2 10.2 12 contacts 15 contacts 18 contacts 24 contacts 36 contacts Ø3.5 Ø1.2 2 9. 3 2 34. 39.4 39.4 5.08 7 10.2 54. 10.2 10.2 15.3 5.08 15.3 Right angle board mount 3 contacts 6 contacts 12 contacts 18 contacts Ø3.5 8 1 1 2 0 9 4. 4. 9. 5. 4. 2 2 2 3 Ø0.12 5.08 Note: all dimensions are in mm Secure connector with screws (not supplied), recommended torque 0.3 N.m 18

SMS Series | Quick Mating Pin Header Quick Mating PC board mount Pin Headers and plugs Description Quick Mating Pin Header, available in 3, 4, 6, 9 and 10 positions, provides the additional versatility of straight and right angle board mounting. Offered as an alternative to stacked connectors, the in-line contact design of the pin header provides the user with significant PC board space savings. The board mount receptacle features positive polarization and a moulded on pin protection skirt and is supplied preassembled with straight or right angled: • Solid machined or stamped and formed PC board pin contacts. Environmental • Coax PC board pin contacts. J = Gold fl ash over 2μ Ni • Operating temperature: -55°C to +125°C The socket cable plug features positive quick T = 3 - 5μ Tin all over • Insulation resistance: 5000 MΩ min. connect / disconnect latches and is designed to • Plating for Stamped and formed contacts: • Test potential: 2000 VAC accept N° 16 TRIM TRIO 1.6mm diameter socket D28 = Min. 0.75μ Au over nickel. • Current rating: contacts for maximum contact protection. D70 = Active part: Gold fl ash over Ni - 5 Amp for stamped and formed contacts Crimp area: Ni - 7.5 Amps for machined contacts Features and benefits • Durability: 500 matings and unmatings. TR29 = 3 - 5μ Tin all over • Plating for coax contacts: • Available in 3, 4, 6, 9 and 10 positions. Z17 = Min. 0.75μ Au in contact area, • In-line contact design, offering significant PC Material Flash on solder tail (inner) board space savings. • Connector body: Min 0.75μ Au in contact area, • Board mount connectors available in straight Glass filled thermoplast UL94 V0 Tin on solder tail (outer) and right angled version preassembled with: Color: Black - Solid machined or stamped and formed • Contacts: High conductive copper alloy Intermateability pin contacts. - Coax pin contacts. • “SMS” Socket plugs accept TRIM TRIO size Plating table • UL recognized File Nr.: E238675 16 removable snap-lock contacts (see • CSA metter certififed File Nr.: LR44961-21 • Plating for solid machined contacts: contact section) No digit (std) = Min. 0.4μ Gold all over, • Contacts to be ordered seperately. over Nickel. Ordering information Connector family SMS 12 PH 3 0 TR29 Layout: see page 14 Body variation: PH: Pin header board mount CH: Coax header board mount P3: Socket cable plug for pin and coax header board mount Design variation: 2: Straight coax header board mount with male contacts 3: Right angle pin header board mount with stamped male contacts 4: Straight pin header board mount with stamped male contacts GE6: Right angle pin header board mount with machined male contacts GE4: Straight pin header board mount with machined male contacts Plating indication 19

SMS Series | Quick Mating Pin Header Connectors (Continued) Right angle pin header board mount with male contacts Ø3.5 Ø3.5 8 0 5. B C 8 0 Ø 9.4 4.2 22.9 Part number Nbr. of A B C Solid machined contacts Stamped & formed contacts contact SMS3PH3* SMS3PHGE6 3 31.2 25.4 19.3 SMS4PH3* SMS4PHGE6 4 36.3 30.4 24.4 SMS6PH3* SMS6PHGE6 6 46.5 40.6 34.5 SMS9PH3* SMS9PHGE6 9 61.7 55.9 49.8 SMS10PH3* SMS10PHGE6 10 66.8 61.0 54.9 * for coding see page 17 Example: SMS9PH3J9 - SMS with 9 solid machined contacts, plating J9 Straight pin header board mount with male contacts Ø3.5 4.0 Ø3.5 8 0 5. 8 0. Ø A B C 9.4 22.9 Part number Nbr. of A B C Solid machined contacts Stamped & formed contacts contact SMS3PH4* SMS3PHGE4 3 31.2 25.4 19.3 SMS4PH4* SMS4PHGE4 4 36.3 30.4 24.4 SMS6PH4* SMS6PHGE4 6 46.5 40.6 34.5 SMS9PH4* SMS9PHGE4 9 61.7 55.9 49.8 SMS10PH4* SMS10PHGE4 10 66.8 61.0 54.9 * for coding see page 17 Example: SMS9PH4J9 - SMS with 9 solid machined contacts, plating J9 Note: all dimensions are in mm 20

SMS Series | Quick Mating Pin Header Straight coax header board mount with male contacts Ø3.5 4.2 Ø3.5 8 0 5. 8 0. Ø A B 0 C 1. Ø 9.4 5.0 22.9 Part number Nbr. of contact A B C SMS3CH2Z17 3 31.2 25.4 19.3 SMS4CH2Z17 4 36.3 30.4 24.4 SMS6CH2Z17 6 46.5 40.6 34.5 SMS9CH2Z17 9 61.7 55.9 49.8 SMS10CH2Z17 10 66.8 61.0 54.9 * for coding see page 17 Socket cable plug for pin and coax board mount header 8 5. A 5.9 25.0 Part number Number of contact* A SMS3P3 3 16.0 SMS4P3 4 21.1 SMS6P3 6 31.2 SMS9P3 9 46.5 SMS10P3 10 51.6 *Contacts supplied separately Note: all dimensions are in mm 21

SMS Series | Quick Mating Pin Header Drilling Pattern Dimensions Right angle Pin Header Straight Pin Header Ø1.2 Ø1.2 5.08 5.08 Ø3.5 32 Ø3.5 4. 7.62 7.62 F F Right angle Coax Header Straight Coax Header 2.54 E Ø1.4 2.54 E Ø1.4 5.08 5.08 Ø3.5 34 Ø3.5 2. 7.62 7.62 F F Number of contact E F 3 10.18 25.40 4 15.24 30.48 6 25.40 40.64 9 40.64 55.88 10 45.72 60.96 Note: all dimensions are in mm Secure connector with screws (not supplied), recommended torque 0.3 N.m 22

SMS Series | Accessories Discrimination keys for SMS connectors In applications where similar connectors are used next to each other, mismatching can be a reason for disturbances, system failure or even danger to operator. To eliminate mismatching, all SMS can be equipped with discrimination solutions, which offer unlimited possibilities for a "fool-proof" interconnection system. When one of these discrimination keys is used, the SMS will only mate with a connector which has a vacant contact or discrimination cavity at the corresponding position. This system offers boundless opportunities for all applications. The material used is polyamide 6.6. For fixe female contacts and without discrimination cavities: Both connectors have removable contacts: SMSPKE0 SMSPKE2V1 Male contact Female contact Empty cavity Discrimination key A dummy contact, which can be inserted into an empty contact cavity A pin, which can be inserted into a preassambled female contact in all in any of SMS connectors. female boardmount connectors SMS. Specially for connectors without discrimination cavities and without removable pin contact: SMSPKB2 Both connectors have discrimination cavities: SMSPKE3 Male contact Female contact Discrimination pins Discrimination Empty discrimination Empty cavity sleeve cavities A tube, which can be fitted over a preassembled male contact in all A pin, which can be inserted in the discrimination cavities of the SMS industrial male boardmount connectors SMS. Quick mating cable and boardmount connectors. The discrimination cavities are in between of the contact cavities and offer the advantage that no contact cavities are lost due to discrimination. As extraction tool, the RX2025GE1 without the "extraction tool tip" can be used. RX2025GE1 23

Reliable People, Reliable Solutions g. writin d in prove p d, unless a bite prohi plication is du Any ment. Your local contact public announce prior notifi cation or without ges OpThruoisrt ecccoatntiaotlrnoib:gu itsio pnr itnot eedn voinro PnEmFeCn tal U for chan cAedrvtiafi necde mpaepnet rof sustainable URIA wood cultivation. www.pefc.org d to SO ghts reserve All ri wcwonwt.ascotiunrdiuasut-riyn@dsuosutrriaiaul..ccoomm Copyright SOURIAU Nov 2014 - SOURIAU is a registered trademark document presents only general particulars and shall not form part of any contract. © WCASMSUEEN01All information in this

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ouriau: SMS12RE-3S6 SMS12RE3D70 SMS24RE4S6 SMS3RE4S6 SMS3RE3S6 SMS9SE4K9 SMS12GE6 SMS10CH- 2Z17 SMS24GE4 SMS3GE6 SMS12GE3 SMS18GE3 SMS18GE6 SMS24GE3 SMS36SE3K9 SMS3GE4 SMS3PDH3 SMS4GE4 SMS4PDH3 SMS6GE4 SMS6GE5 SMS6GE53 SMS3PH-3TR29 SMS9PH-4TR29 SMS4PH-3TR29 SMS6GE6 SMS12SE3K9 SMS9PH4D28 SMS4R1 SMS6GE3 SMS36RE4TR29 SMS12GE3T SMS12GE4 SMS3PH-GE4 SMS36RE3TR29 SMS24R1 SMS6R1 SMS3R1 SMS4PH-4TR29 SMS10P-3 SMS2RE-3TR29 SMS12R1 SMS36R1 SMS6PH-4D28 SMS6PH-3TR29 SMS9PH4D70 SMS18SE3K9 SMS9R1 SMS3PHGE6 SMS3PH-4D28 SMS6PH-4TR29 SMS10PH-3TR29 SMS10PH-4TR29 SMS24GE4J SMS12SE5K9 SMS6RE4TR29 SMS36R3D70 SMS2CSB1 SMS9CSB1