SMP-0SCMC Trisil™ for telecommunication equipment protection Datasheet  production data Features ■ Bidirectional crowbar protection ■ Repetitive peak pulse current (T -40 °C to +85°C) amb – I = 100 A (10/1000 µs) PP – I = 200 A (5/310 µs) PP – I = 500 A (2/10 µs) PP ■ Breakdown voltage: from 72 V to 310 V SMB ■ Operating T max: 150 °C j (JEDEC DO-214AA) ■ Micro capacitance technology ■ JEDEC registered package outline Complies with the following standards ■ Telcordia GR-1089 ■ ITU-T K20/21/45 enhanced level Description ■ TIA-968 ■ YD/T 950 / 993 / 1082 The devices in the SMP-0SCMC series are micro ■ IEC 61000-4-5 capacitance Trisils designed to protect broadband telecommunication equipment such as DSL ■ IEC 61000-4-2 level 4 modems, subscriber gateways and DSLAMs from – ±15 kV (air discharge) lightning surges and power faults. – ±8 kV (contact discharge) Trisils are not subject to aging and provide a ■ MIL STD 883H - Method 3015-8 Class 3B failsafe mode in short circuit for a better ■ Resin meets UL 94, V0 protection. They are used to help equipment to meet main standards such as UL60950, IEC950 / ■ MIL-STD-750, method 2026 soldererabilty CSA C22.2and UL1459. ■ EIA STD RS-481 and IEC 60286-3 packing The SMP-0SCMC series is packaged in SMB. ■ IPC 7531 footprint ■ UL497B recognized, UL file E136224 TM: Trisil is a trademark of STMicroelectronics January 2013 Doc ID 022779 Rev 1 1/7 This is information on a product in full production. www.st.com 7

Characteristics SMP-0SCMC 1 Characteristics Table 1. A bsolute ratings (-40 °C < T < 85 °C) for repetitive peak pulse current I amb PP Voltage 0.5/700 2/10 1.2/50 10/160 10/560 9/720 10/360 10/1000 10/700 µs pulse Current 0.2/310 2/10 8/20 10/160 10/560 5/320 10/360 10/1000 5/310 µs pulse I 100 500 400 200 150 200 175 100 200 A PP Table 2. A bsolute ratings (T = 25 °C) for other parameters amb Symbol Parameter Value Unit t = 10 ms 61 t = 0.2 s 18 I Non repetitive surge peak on-state current (sinusoidal)(1) t = 1 s 9 A TSM t = 2 s 7 t = 15 mn 4 T Storage temperature range -55 to 150 °C stg T Operating junction temperature range -40 to 150 °C j T Maximum lead temperature for soldering during 10 s. 260 °C L 1. In fail safe mode, the device acts as a short circuit. Figure 1. Electrical characteristics - definitions (T = 25 °C) amb Symbol Parameter I I PP V Stand-off voltage RM VBO Breakover voltage IT I Leakage current RM I I Peak pulse current BO PP I I On-statecurrent H T IH Holding current IRM V V On-statevoltage T C Capacitance VT VRMVR VBO 2/7 Doc ID 022779 Rev 1

SMP-0SCMC Characteristics Table 3. E lectrical characteristics - values (T = 25 °C) amb IRM max @ VRM VBR VBO IH VT @ 2.2 A C @ 2 V C @ 50 V T(1) Order code Max. Typ. Max. Min. Max. Max. Max. µA V V V mA V pF pF 10-4/°C SMP0720SCMC 5 65 72 88 150 3 80 45 9 SMP0900SCMC 5 75 90 98 150 3 80 45 9.1 SMP1100SCMC 5 90 110 130 150 3 75 40 9.3 SMP1300SCMC 5 120 130 160 150 3 75 40 9.5 SMP1500SCMC 5 140 150 180 150 3 75 40 9.7 SMP1800SCMC 5 170 180 220 150 3 70 35 9.9 SMP2100SCMC 5 180 210 240 150 3 45 25 10.2 SMP2300SCMC 5 190 230 260 150 3 45 25 10.3 SMP2600SCMC 5 220 260 300 150 3 40 20 10.6 SMP3100SCMC 5 275 310 350 150 3 40 20 11 1. For V versus junction temperature, use the following formula: V @ T = V @ 25 °C x (1 + T x (T - 25)) BR BR J BR J Figure 2. Pulse waveform Figure 3. Non repetitive surge peak on-state current versus overload duration ITSM(A) %IPP Repetitive peak pulse current 70 F=50Hz tr = rise time (µs) Tj initial = 25°C 60 100 tp = pulse duration time (µs) 50 40 50 30 20 0 10 t t(s) tr tp 0 1.E-02 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 Doc ID 022779 Rev 1 3/7

Characteristics SMP-0SCMC Figure 4. R elative variation of holding Figure 5. Percentage of change of break over current versus junction voltage versus junction temperature temperature IH(Tj) / IH(Tj= 25 °C) % 2,0 14 12 1,8 10 1,6 8 1,4 6 4 1,2 2 1,0 0 0,8 -2 -4 0,6 Tj(°C) -6 Tj(°C) 0,4 -8 -40 -20 0 20 40 60 80 100 120 140 -40 -20 0 20 40 60 80 100 120 140 Figure 6. Relative variation of junction capacitance versus reverse applied voltage (typical values) 1,4 C[VR]/C[VR=2] F = 1 MHz 1,2 VRMS= 1V Tj= 25 °C 1,0 0,8 0,6 0,4 VR(V) 0,2 1 10 100 1000 4/7 Doc ID 022779 Rev 1

SMP-0SCMC Package information 2 Package information ● Epoxy meets UL94, V0 ● Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. T able 4. SMB dimensions Dimensions Ref. Millimeters Inches E1 Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 D A2 0.05 0.20 0.002 0.008 b 1.95 2.20 0.077 0.087 E c 0.15 0.40 0.006 0.016 A1 E 5.10 5.60 0.201 0.220 E1 4.05 4.60 0.159 0.181 C A2 L b D 3.30 3.95 0.130 0.156 L 0.75 1.50 0.030 0.059 Figure 7. Footprint dimensions Figure 8. Marking layout in mm (inches) 1.62 2.60 1.62 (0.064) (0.102) (0.064) e e:ECOPACK compliance 2.18 XXXXX: Marking (0.086) x x x x x Z: Manufacturing location Y: Year WW: week z y ww 5.84 (0.23) Doc ID 022779 Rev 1 5/7

Ordering information SMP-0SCMC 3 Ordering information T able 5. Ordering information Order code Marking Package Weight Base qty Delivery mode SMP0720SCMC P07CM SMP0900SCMC P09CM SMP1100SCMC P11CM SMP1300SCMC P13CM SMP1500SCMC P15CM SMB 98 mg 2500 Tape and reel SMP1800SCMC P18CM SMP2100SCMC P21CM SMP2300SCMC P23CM SMP2600SCMC P26CM SMP3100SCMC P31CM 4 Revision history T able 6. Document revision history Date Revision Changes 17-Jan-2013 1 Initial version. 6/7 Doc ID 022779 Rev 1

SMP-0SCMC Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 022779 Rev 1 7/7

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: SMP0720SCMC SMP1500SCMC SMP2100SCMC SMP3100SCMC SMP0900SCMC SMP1300SCMC SMP1800SCMC SMP2300SCMC SMP2600SCMC SMP1100SCMC