NT *RoHS VCEOARVMSIAPILOLINAASB LE Features Applications NT MPLIA n RoHS compliant* n IEC 61000-4-2 ESD (Min. Level 4) O HS C n Surface Mount SMC package n IEC 61000-4-4 EFT Ro * n Standoff Voltage: 5.0 to 170 volts n IEC 61000-4-5 Surge n Power Dissipation: 3000 watts REE D F LEA SMLJ Transient Voltage Suppressor Diode Series General Information TiBnhoceure rmnassa irnokgfefeltysr s so mTf rapalonlerstrai eebnlleet c Vctrooolmtnaimgc euc onSmiucapptpoiornenessns,t oscLr.VoER EADomRDH SIiSF poORCNuEdOSE teMAiPnsRLIEg Af NoaTr*n sdu vrgidee aon edq EuiSpDm epnrot taercet iochna allpepnlgicinagtio tnhse, sine mcoicmopnadcutc ctohri pin pdaucsktrayg teo DdOev-e2l1o4pA B (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ps for unidirectional devices and less than 5.0 ps for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 3000 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load IFSM 300 Amps (JEDEC Method) (Note 3) Steady State Power Dissipation @ TL = 75 °C PM(AV) 5.0 Watts M(Faoxr imUnuimdi rIencsttiaonntaal nUenoiutss OFnolryw)ard Voltage @ IPP = 100 A SSMMLLJJ51.000AA ~ ~ S SMMLLJJ9107A0 A VF 35..50 Volts Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG -55 to +150 °C 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order SMLJ 5.0 CA - H Package SMLJ = SMC/DO-214AB Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) Asia-Pacific: Suffix A = 5 % Tolerance Unidirectional Device Tel: +886-2 2562-4117 CA = 5 % Tolerance Bidirectional Device Email: asiacus@bourns.com Reel Europe: (blank) = 13 inch reel Tel: +36 88 520 390 -H = 7 inch reel Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

SMLJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Working Maximum Maximum Maximum Breakdown Voltage Peak Reverse Reverse Reverse Unidirectional Device Bidirectional Device VBR (Volts) Reverse Leakage Voltage Surge Voltage @ VRWM @ IRSM Current NuPmarbte r MaPrakritn g NuPmarbte r MaPrakritn g Min. Max. @ IT (mA) (VVRoWltsM) IR (μA) VRSM (Volts) IRSM (Amps) SMLJ5.0A HDE SMLJ5.0CA IDE 6.40 7.00 10 5 1000 9.2 326.00 SMLJ6.0A HDG SMLJ6.0CA IDG 6.67 7.37 10 6 1000 10.3 291.30 SMLJ6.5A HDK SMLJ6.5CA IDK 7.22 7.98 10 6.5 500 11.2 267.90 SMLJ7.0A HDM SMLJ7.0CA IDM 7.78 8.60 10 7 200 12 250.00 SMLJ7.5A HDP SMLJ7.5CA IDP 8.33 9.21 1 7.5 100 12.9 232.60 SMLJ8.0A HDR SMLJ8.0CA IDR 8.89 9.83 1 8 50 13.6 220.60 SMLJ8.5A HDT SMLJ8.5CA IDT 9.44 10.4 1 8.5 25 14.4 208.40 SMLJ9.0A HDV SMLJ9.0CA IDV 10.0 11.1 1 9 10 15.4 194.80 SMLJ10A HDX SMLJ10CA IDX 11.1 12.3 1 10 5 17 176.40 SMLJ11A HDZ SMLJ11CA IDZ 12.2 13.5 1 11 5 18.2 164.80 SMLJ12A HEE SMLJ12CA IEE 13.3 14.7 1 12 2 19.9 150.60 SMLJ13A HEG SMLJ13CA IEG 14.4 15.9 1 13 2 21.5 139.40 SMLJ14A HEK SMLJ14CA IEK 15.6 17.2 1 14 2 23.2 129.40 SMLJ15A HEM SMLJ15CA IEM 16.7 18.5 1 15 2 24.4 123.00 SMLJ16A HEP SMLJ16CA IEP 17.8 19.7 1 16 2 26 115.40 SMLJ17A HER SMLJ17CA IER 18.9 20.9 1 17 2 27.6 106.60 SMLJ18A HET SMLJ18CA IET 20.0 22.1 1 18 2 29.2 102.80 SMLJ20A HEV SMLJ20CA IEV 22.2 24.5 1 20 2 32.4 92.60 SMLJ22A HEX SMLJ22CA IEX 24.4 26.9 1 22 2 35.5 84.40 SMLJ24A HEZ SMLJ24CA IEZ 26.7 29.5 1 24 2 38.9 77.20 SMLJ26A HFE SMLJ26CA IFE 28.9 31.9 1 26 2 42.1 71.20 SMLJ28A HFG SMLJ28CA IFG 31.1 34.4 1 28 2 45.4 66.00 SMLJ30A HFK SMLJ30CA IFK 33.3 36.8 1 30 2 48.4 62.00 SMLJ33A HFM SMLJ33CA IFM 36.7 40.6 1 33 2 53.3 56.20 SMLJ36A HFP SMLJ36CA IFP 40 44.2 1 36 2 58.1 51.60 SMLJ40A HFR SMLJ40CA IFR 44.4 49.1 1 40 2 64.5 46.40 SMLJ43A HFT SMLJ43CA IFT 47.8 52.8 1 43 2 69.4 43.20 SMLJ45A HFV SMLJ45CA IFV 50 55.3 1 45 2 72.7 41.20 SMLJ48A HFX SMLJ48CA IFX 53.3 58.9 1 48 2 77.4 38.80 SMLJ51A HFZ SMLJ51CA IFZ 56.7 62.7 1 51 2 82.4 36.40 SMLJ54A HGE SMLJ54CA IGE 60 66.3 1 54 2 87.1 34.40 SMLJ58A HGG SMLJ58CA IGG 64.4 71.2 1 58 2 93.6 32.00 SMLJ60A HGK SMLJ60CA IGK 66.7 73.7 1 60 2 96.8 31.00 SMLJ64A HGM SMLJ64CA IGM 71.1 78.6 1 64 2 103 29.20 SMLJ70A HGP SMLJ70CA IGP 77.8 86.0 1 70 2 113 26.60 SMLJ75A HGR SMLJ75CA IGR 83.3 92.1 1 75 2 121 24.80 SMLJ78A HGT SMLJ78CA IGT 86.7 95.8 1 78 2 126 22.80 SMLJ85A HGV SMLJ85CA IGV 94.4 104 1 85 2 137 20.80 SMLJ90A HGX SMLJ90CA IGX 100 111 1 90 2 146 20.60 SMLJ100A HGZ SMLJ100CA IGZ 111 123 1 100 2 162 18.60 SMLJ110A HHE SMLJ110CA IHE 122 135 1 110 2 177 16.80 SMLJ120A HHG SMLJ120CA IHG 133 147 1 120 2 193 15.60 SMLJ130A HHH SMLJ130CA IHH 144 159 1 130 2 209 14.40 SMLJ150A HHM SMLJ150CA IHM 167 185 1 150 2 243 12.40 SMLJ160A HHP SMLJ160CA IHP 178 197 1 160 2 259 11.60 SMLJ170A HHR SMLJ170CA IHR 189 209 1 170 2 275 11.00 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

SMLJ Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A A a B B C B b C c G D Dimension SMC (DO-214AB) 4.69 a (Max.) (0.185) H FC D 3.07 b (Min.) E (0.121) 1.52 c (Min.) F (0.060) Dimension SMC (DO-214AB) MM DIMENSIONS: (I6NC.6HE0S )- 7.11 MM A DIMENSIONS: (0.260 - 0.280) (INCHES) 5.59 - 6.22 B E (0.220 - 0.245) 2.90 - 3.20 Physical Specifications C D(IM0E.N1S1IO4N -S :0.1M2M6) Case ...........................................Molded plastic per UL Class 94V-0 0.15 - 0(.I3NC1H ES) D Polarity.......................Cathode band indicates unidirectional device (0.006 - 0.112) No cathode band indicates bidirectional device 7.75 - 8.13 E (0.305 - 0.320) 0.05 - 0.20 F (0.002 - 0.008) 2.00 - 2.62 G (0.079 - 0.103) 0.76 - 1.52 H (0.030 - 0.060) MM DIMENSIONS: (INCHES) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

SMLJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 100 300 s) Peak Pulse Derating in Percent ofPeak Power or Current 752505 10 x 1000 Wbya vRe.fEo.rAm. as Defined Peak Forward Surge Current (Amp22115050500000 SiPnu(gJllsEeeD H WEaClifd MSthien t8eh.-3oW dm)avse 0 0 0 25 50 75 100 125 150 175 200 1 2 5 10 20 50 100 Junction Temperature (°C) Number of Cycles at 60 Hz Pulse Waveform Typical Junction Capacitance 100000 TR=10 µs TA= 25 °C 100 Peak value (IRSM) 10000 I, Peak Pulse Current (%)P 50 TA=T2P5 °C Half value=IR2SMdiwes1ca hd0asPeey rudxfsei len s 1ttfeeo0hind 0ew5e 0adp0ids e wb %tathayhk v a( oRceTtf u.f PpEoIrP)o.rrA meSin.nMtt . C - Junction Capacitance (pF)J 110010000 Bidirectional Unidirectional 0 1 0 1.0 2.0 3.0 4.0 1 10 100 1000 T, Time (ms) VBR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 100 5.0 TA = 25 °C Non-repetitive Pulse Waveform W) Shown in Pulse Waveform Graph on ( 4.0 ati W) 10 sip er (K er Dis 3.0 w w o o P P Peak 1.0 State 2.0 P, P 8.0 mm Lead Areas Steady 1.0 V) 60 Hz Resistive or M(A Inductive Load 0.1 R 0.0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 25 50 75 100 125 150 175 200 TP, Pulse Width TL, Lead Temperature (°C) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

CSDMDLFJN T5r-a0n5s0ie4nNt -V ToVltSa/gSet eSeurpinpgre Dsisoodre D Aiorrdaey Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P1 E T d Index Hole 120 ° F D2 W B D1 D P A C Trailer Device Leader ....... ....... ....... ....... W1 End ....... ....... ....... ....... Start MM DIMENSIONS: (INCHES) 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA standard Direction of Feed RS-481-A and specifications shown here. Item Symbol SMC (DO-214AB) 7 Inch Reel 13 Inch Reel 6.0 ± 2.0 Carrier Width A (0.236 - 0.079) 8.3 ± 0.20 Carrier Length B (0.327 ± 0.008) 2.5 ± 0.20 Carrier Depth C (0.098 ± 0.008) 1.50 ± 0.10 Sprocket Hole d (0.059 ± 0.004) 178 330 Reel Outside Diameter D (7.008) (12.992) 50.0 Reel Inner Diameter D1 (1.969) MIN. 13.0 +0.50/-0.20 Feed Hole Diameter D2 (0.512 +0.020/-0.008) 1.75 ± 0.10 Sprocket Hole Position E (0.069 ± 0.004) 7.50 ± 0.10 Punch Hole Position F (0.295 ± 0.004) 8.00 ± 0.10 Punch Hole Pitch P (0.315 ± 0.004) 4.00 ± 0.10 Sprocket Hole Pitch P0 (0.157 ± 0.004) 2.00 ± 0.10 Embossment Center P1 (0.079 ± 0.004) 0.30 ± 0.10 Overall Tape Thickness T (0.012 ± 0.004) 16.00 ± 0.30 Tape Width W (0.630 ± 0.012) 22.4 Reel Width W1 (0.882) MAX. Quantity per Reel -- 500 3,000 REV. 06/16 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B ourns: SMLJ100A SMLJ10A SMLJ110A SMLJ11A SMLJ120A SMLJ12A SMLJ130A SMLJ13A SMLJ14A SMLJ150A SMLJ15A SMLJ160A SMLJ16A SMLJ170A SMLJ17A SMLJ18A SMLJ20A SMLJ22A SMLJ24A SMLJ26A SMLJ28A SMLJ30A SMLJ33A SMLJ36A SMLJ40A SMLJ43A SMLJ45A SMLJ48A SMLJ5.0A SMLJ51A SMLJ54A SMLJ58A SMLJ6.0A SMLJ6.5A SMLJ60A SMLJ64A SMLJ7.0A SMLJ7.5A SMLJ70A SMLJ75A SMLJ78A SMLJ8.0A SMLJ8.5A SMLJ85A SMLJ9.0A SMLJ90A SMLJ100CA SMLJ10CA SMLJ110CA SMLJ11CA SMLJ120CA SMLJ12CA SMLJ130CA SMLJ13CA SMLJ14CA SMLJ150CA SMLJ15CA SMLJ160CA SMLJ16CA SMLJ170CA SMLJ17CA SMLJ18CA SMLJ20CA SMLJ22CA SMLJ24CA SMLJ26CA SMLJ28CA SMLJ30CA SMLJ33CA SMLJ36CA SMLJ40CA SMLJ43CA SMLJ45CA SMLJ48CA SMLJ5.0CA SMLJ51CA SMLJ54CA SMLJ58CA SMLJ6.0CA SMLJ6.5CA SMLJ60CA SMLJ64CA SMLJ7.0CA SMLJ7.5CA SMLJ70CA SMLJ75CA SMLJ78CA SMLJ8.0CA SMLJ8.5CA SMLJ85CA SMLJ9.0CA SMLJ90CA SMLJ17CA-H SMLJ54A-H SMLJ36A-H SMLJ28CA-H SMLJ6.0A-H SMLJ130CA-H SMLJ100CA-H SMLJ110A-H