Transient Voltage Suppression Diodes Surface Mount – 3000W > SMDJ series SMDJ Series RoHS Pb e3 Description Uni-directional The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 3000W P capability • Excellent clamping capability PPM at 10/1000μs waveform, • Low incremental repetition rate (duty surge resistance Bi-directional cycles):0.01% • Typical I less than 2μA when • For surface mounted V min>R12V applications in order to BR Agency Approvals • High temperature to reflow optimize board space soldering guaranteed: Agency Agency File Number • Low profile package 260°C/40sec • Typical failure mode is short • V @ T= V @25°C x (1+αT E230531 from over-specified voltage x B(RT - 2J5))(αBRT:Temperature or current CoeJfficient, typical Maximum Ratings and Thermal Characteristics • Whisker test is conducted value is 0.1%) (TA=25OC unless otherwise noted) based on JEDEC JESD201A • UL Recognized compound per its table 4a and 4c meeting flammability rating Parameter Symbol Value Unit • IEC-61000-4-2 ESD 30kV(Air), V-0 Peak Pulse Power Dissipation at TA=25ºC 30kV (Contact) • Meet MSL level1, per by 10/1000µs Waveform (Fig. 2,4) PPPM 3000 W • ESD protection of data lines J-STD-020, LF maximun peak (Note 1,2,5) in accordance with of 260°C Power Dissipation on Infinite Heat Sink IEC 61000-4-2 • Matte tin lead–free plated P 6.5 W at TL=50OC D • EFT protection of data lines • Halogen free and Peak Forward Surge Current, 8.3ms in accordance with RoHS compliant Single Half Sine Wave (Note 3) IFSM 300 A IEC 61000-4-4 • Pb-free E3 means 2nd level Maximum Instantaneous Forward • Built-in strain relief interconnect is Pb-free and Voltage at 100A for Unidirectional V 3.5/5.0 V • Glass passivated chip the terminal finish material is F Only(Note 4) junction tin(Sn) (IPC/JEDEC J-STD- -65 to • Fast response time: typically 609A.01) Operating Temperature Range T °C J 150 less than 1.0ps from 0V to BV min -65 to Storage Temperature Range T °C STG 175 Typical Thermal Resistance Junction to R 15 °C/W Lead ƟJL Applications Typical Thermal Resistance Junction to R 75 °C/W Ambient ƟJA TVS components are ideal for the protection of I/O Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) =25OC per Fig. 3. Interfaces, V bus and other vulnerable circuits used in J CC 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. telecom, computer, Industrial and consumer electronic 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional applications. component only, duty cycle=4 per minute maximum. 4. V < 3.5V for single die parts and V< 5.0V for stacked-die parts. F F 5. The P of stacked-die parts is 4000W and please contact Littelfuse for stacked-die PPM part details. Additional Infomarion Functional Diagram Bi-directional Datasheet Resources Samples Cathode Anode Uni-directional © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/27/18

Transient Voltage Suppression Diodes Surface Mount – 3000W > SMDJ series Electrical Characteristics (T=25°C unless otherwise noted) A Maximum Maximum Maximum Maximum Breakdown Maximum Part Part Marking Reverse Voltage V Test Clamping Peak Clamping Peak Reverse Maximum Agency Number Number Stand off Current Voltage VC Pulse Voltage VC Pulse Leakage IR Temperature Approval I @ Current @ Current coefficient (Uni) (Bi) Voltage V T @ VR (mA) Ipp(10/1000μs) Ipp(10/1000μs) Ipp(8/20μs) Ipp(8/20μs) of VBR (%/C) UNI BI MIN MAX (μA) (V) (A) (V) (A) SMDJ5.0A SMDJ5.0CA RDE DDE 5.0 6.40 7.00 10 9.2 326.1 11.89 1630.5 800 0.041 X SMDJ6.0A SMDJ6.0CA RDG DDG 6.0 6.67 7.37 10 10.3 291.3 13.31 1456.5 800 0.046 X SMDJ6.5A SMDJ6.5CA RDK DDK 6.5 7.22 7.98 10 11.2 267.9 14.47 1339.5 500 0.052 X SMDJ7.0A SMDJ7.0CA PDM DDM 7.0 7.78 8.60 10 12.0 250.0 15.50 1250.0 200 0.058 X SMDJ7.5A SMDJ7.5CA PDP DDP 7.5 8.33 9.21 1 12.9 232.6 16.67 1163.0 100 0.061 X SMDJ8.0A SMDJ8.0CA PDR DDR 8.0 8.89 9.83 1 13.6 220.6 17.57 1103.0 50 0.064 X SMDJ8.5A SMDJ8.5CA PDT DDT 8.5 9.44 10.40 1 14.4 208.3 18.60 1041.5 20 0.066 X SMDJ9.0A SMDJ9.0CA PDV DDV 9.0 10.00 11.10 1 15.4 194.8 19.90 974.0 10 0.069 X SMDJ10A SMDJ10CA PDX DDX 10.0 11.10 12.30 1 17.0 176.5 21.96 882.5 5 0.071 X SMDJ11A SMDJ11CA PDZ DDZ 11.0 12.20 13.50 1 18.2 164.8 23.51 824.0 2 0.074 X SMDJ12A SMDJ12CA PEE DEE 12.0 13.30 14.70 1 19.9 150.8 25.71 754.0 2 0.075 X SMDJ13A SMDJ13CA PEG DEG 13.0 14.40 15.90 1 21.5 139.5 27.78 697.5 2 0.076 X SMDJ14A SMDJ14CA PEK DEK 14.0 15.60 17.20 1 23.2 129.3 29.97 646.5 2 0.08 X SMDJ15A SMDJ15CA PEM DEM 15.0 16.70 18.50 1 24.4 123.0 31.52 615.0 2 0.083 X SMDJ16A SMDJ16CA PEP DEP 16.0 17.80 19.70 1 26.0 115.4 33.59 577.0 2 0.084 X SMDJ17A SMDJ17CA PER DER 17.0 18.90 20.90 1 27.6 108.7 35.66 543.5 2 0.085 X SMDJ18A SMDJ18CA PET DET 18.0 20.00 22.10 1 29.2 102.7 37.73 513.5 2 0.088 X SMDJ20A SMDJ20CA PEV DEV 20.0 22.20 24.50 1 32.4 92.6 41.86 463.0 2 0.091 X SMDJ22A SMDJ22CA PEX DEX 22.0 24.40 26.90 1 35.5 84.5 45.87 422.5 2 0.092 X SMDJ24A SMDJ24CA PEZ DEZ 24.0 26.70 29.50 1 38.9 77.1 50.26 385.5 2 0.092 X SMDJ26A SMDJ26CA PFE DFE 26.0 28.90 31.90 1 42.1 71.3 54.39 356.5 2 0.093 X SMDJ28A SMDJ28CA PFG DFG 28.0 31.10 34.40 1 45.4 66.1 58.66 330.5 2 0.094 X SMDJ30A SMDJ30CA PFK DFK 30.0 33.30 36.80 1 48.4 62.0 62.53 310.0 2 0.096 X SMDJ33A SMDJ33CA PFM DFM 33.0 36.70 40.60 1 53.3 56.3 68.86 281.5 2 0.097 X SMDJ36A SMDJ36CA PFP DFP 36.0 40.00 44.20 1 58.1 51.6 75.06 258.0 2 0.098 X SMDJ40A SMDJ40CA PFR DFR 40.0 44.40 49.10 1 64.5 46.5 83.33 232.5 2 0.099 X SMDJ43A SMDJ43CA PFT DFT 43.0 47.80 52.80 1 69.4 43.2 89.66 216.0 2 0.1 X SMDJ45A SMDJ45CA PFV DFV 45.0 50.00 55.30 1 72.7 41.3 93.93 206.5 2 0.101 X SMDJ48A SMDJ48CA PFX DFX 48.0 53.30 58.90 1 77.4 38.8 100.00 194.0 2 0.101 X SMDJ51A SMDJ51CA PFZ DFZ 51.0 56.70 62.70 1 82.4 36.4 106.46 182.0 2 0.101 X SMDJ54A SMDJ54CA RGE DGE 54.0 60.00 66.30 1 87.1 34.4 112.53 172.0 2 0.102 X SMDJ58A SMDJ58CA PGG DGG 58.0 64.40 71.20 1 93.6 32.1 120.93 160.5 2 0.103 X SMDJ60A SMDJ60CA PGK DGK 60.0 66.70 73.70 1 96.8 31.0 125.06 155.0 2 0.103 X SMDJ64A SMDJ64CA PGM DGM 64.0 71.10 78.60 1 103.0 29.1 133.07 145.5 2 0.104 X SMDJ70A SMDJ70CA PGP DGP 70.0 77.80 86.00 1 113.0 26.5 145.99 132.5 2 0.105 X SMDJ75A SMDJ75CA PGR DGR 75.0 83.30 92.10 1 121.0 24.8 156.33 124.0 2 0.106 X SMDJ78A SMDJ78CA PGT DGT 78.0 86.70 95.80 1 126.0 23.8 162.79 119.0 2 0.106 X SMDJ85A SMDJ85CA PGV DGV 85.0 94.40 104.00 1 137.0 21.9 177.00 109.5 2 0.106 X SMDJ90A SMDJ90CA PGX DGX 90.0 100.00 111.00 1 146.0 20.5 188.63 102.5 2 0.107 X SMDJ100A SMDJ100CA PGZ DGZ 100.0 111.00 123.00 1 162.0 18.5 209.30 92.5 2 0.107 X SMDJ110A SMDJ110CA PHE DHE 110.0 122.00 135.00 1 177.0 16.9 228.68 84.5 2 0.107 X SMDJ120A SMDJ120CA PHG DHG 120.0 133.00 147.00 1 193.0 15.5 249.35 77.5 2 0.108 X SMDJ130A SMDJ130CA PHK DHK 130.0 144.00 159.00 1 209.0 14.4 270.03 72.0 2 0.108 X SMDJ150A SMDJ150CA PHM DHM 150.0 167.00 185.00 1 243.0 12.3 313.95 61.5 2 0.108 X SMDJ160A SMDJ160CA PHP DHP 160.0 178.00 197.00 1 259.0 11.6 334.63 58.0 2 0.108 X SMDJ170A SMDJ170CA PHR DHR 170.0 189.00 209.00 1 275.0 10.9 355.30 54.5 2 0.108 X SMDJ180A SMDJ180CA PHT DHT 180.0 200.00 221.00 1 292.0 10.3 377.26 51.5 2 0.108 X SMDJ200A SMDJ200CA PHV DHV 200.0 224.00 247.00 1 324.0 9.3 418.60 46.5 3 0.11 X SMDJ220A SMDJ220CA PKE DKE 220.0 244.00 270.00 1 356.0 8.4 459.95 42.0 2 0.11 X SMDJ250A SMDJ250CA PKG DKG 250.0 279.00 309.00 1 405.0 7.5 523.26 37.5 2 0.11 X SMDJ300A SMDJ300CA PKI DKI 300.0 335.00 371.00 1 486.0 6.2 627.91 31.0 2 0.112 X SMDJ350A SMDJ350CA PKJ DKJ 350.0 391.00 432.00 1 567.0 5.3 732.56 26.5 2 0.112 X SMDJ400A SMDJ400CA PKL DKL 400.0 447.00 494.00 1 648.0 4.7 837.21 23.5 2 0.112 X SMDJ440A SMDJ440CA PKN DKN 440.0 492.00 543.00 1 713.0 4.3 921.19 21.5 2 0.112 X © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/27/18

Transient Voltage Suppression Diodes Surface Mount – 3000W > SMDJ series I-V Curve Characteristics Uni-directional Bi-directional Ipp IT Vc VBRVR V Vc VBRVR IR V IRVF IR VRVBRVc IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F Ratings and Characteristic Curves (T=25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Voltage Transients W)100 stacked-die, 4kW k er ( at 10/1000µs, 25°C w Voltage Across TVS o P10 nt e urre uls Single die, 3kW C Current Through TVS P at 10/1000µs, 25°C e or ak Voltag -PeM 1 P P P TJ initial = Tamb 0.1 0.001 0.01 0.1 1 10 t-Pulse Width (ms) Time d continues on next page. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/27/18

Transient Voltage Suppression Diodes Surface Mount – 3000W > SMDJ series Ratings and Characteristic Curves (T=25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 100 e Power (P) or Current (I)PPPPating in Percentage % 468000 Peak Pulse Current, % IRSM 11505000 tr=1PI0PeµPasMke cVaHIlPuaPelMf Va(lI Pu P1a2eTPac0sM usuJ / rd1=)ltrsh02eeee50nfi W °0tpnC dµioedeisdtnceh tabc( wyt.yds hW ) R teiosar. E ev5d .0eteAh%ffieon orpemfde IaPkP M k PulsDer 20 I- PPM ea td P 0 0 0 1.0 2.0 3.0 4.0 0 25 50 75 100 125 150 175 t-Time (ms) T - Initial Junction Temperature (ºC) J Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 100000 100 Uni-direc(cid:31)onal V=0V W) C/ 10000 Bi-direc(cid:31)onal V=0V °ce ( 10 n Uni-direc(cid:31)onal V=V da F) 1000 R pe p m Cj( Bi-direc(cid:31)onal V=VR al I 1 100 m er h T nt 0.1 10 e si n a Tr 1 0.01 1 10 100 1000 0.001 0.01 0.1 1 10 100 1000 VBR-Reverse Breakdown Voltage(V) T -Pulse Duration (s) P Figure 7 - Maximum Non-Repetitive Peak Forward Figure 8 - Peak Forward Voltage Drop vs Peak Forward Surge Current Uni-Directional Only Current (Typical Values) 500 100 Single die 450 ent (A) 400 nt(A) orward Surve Curr 223305050000 Forward Curre 110 Stack-die Peak F 150 Peak 0.1 -M 100 -F FS I I 50 0.01 0 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 1 10 100 VF-Peak Forward Voltage(V) Number of Cycles at 60 Hz © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/27/18

Transient Voltage Suppression Diodes Surface Mount – 3000W > SMDJ series Soldering Parameters Lead–free Reflow Condition assembly TP tp - Temperature Min (T ) 150°C s(min) Ramp-up Critical Zone Pre Heat -- TTeimmep e(mraitnu rteo Mmaaxx) ((Ttss()max)) 6200 0–° C180 secs (T)ure Ts(mTaLx) tL TL to TP Atov epreaagke ramp up rate (Liquidus Temp (TA) 3°C/second max TemperatTs(min) Prethseat Ramp-down T to T - Ramp-up Rate 3°C/second max S(max) A - Temperature (T ) (Liquidus) 217°C Reflow A 25˚C t 25˚C to Peak - Time (min to max) (t) 60 – 150 seconds Time (t) s Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Temperature (t) p Ramp-down Rate 6°C/second max Environmental Specifications Time 25°C to peak Temperature (T) 8 minutes Max. P Do not exceed 260°C High Temp. Storage JESD22-A103 Physical Specifications HTRB JESD22-A108 Weight 0.007 ounce, 0.21 grams Temperature Cycling JESD22-A104 JEDEC DO214AB. Molded plastic body over Case glass passivated junction MSL JEDEC-J-STD-020, Level 1 Color band denotes positive end (cathode) Polarity except for bidirectional versions. H3TRB JESD22-A101 Matte Tin-plated leads, Solderable per Terminal RSH JESD22-A111 JESD22-B102 Dimensions DO-214AB (SMC J-Bend) Inches Millimeters Cathode Band Dimensions (for uni-directional products only) Min Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C A C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 B F - 0.008 - 0.203 G 0.305 0.320 7.750 8.130 H H 0.006 0.012 0.152 0.305 D I 0.129 - 3.300 - J K L J 0.094 - 2.400 - F K - 0.165 4.200 E G I L 0.094 - 2.400 - Dimensions in inches and (millimeters) Solder Pads (all dimensions in mm) © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/27/18

Transient Voltage Suppression Diodes Surface Mount – 3000W > SMDJ series Part Numbering System Part Marking System SMDJ XXXCA Cathode Band (for uni-directional products only) F Littelfuse Logo 5% V VOLTAGE TOLERANCE BR BI-DIRECTIONAL XXX VVOLTAGE Marking Code R YMXXX SERIES Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Options Component Packaging Packaging Part number Quantity Package Option Specification SMDJxxxXX DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481 SMDJxxxXX-T7 DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode 0.315 0.059 DIA Cover tape (8.0) (1.5) Optional 7” 7.0 (187) 13” 13.0 (330) Dimensions are in inches 0.80 (20.2) (and millimeters). Arbor Hole Dia. *For Uni-directional Products only Direction of Feed 0.65 (16.4) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/27/18