SMCG5.0A thru SMCG188CA www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SMCG (DO-215AB) • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS VBR uni-directional 6.40 V to 231 V Use in sensitive electronics protection against voltage V bi-directional 6.40 V to 231 V transients induced by inductive load switching and lighting BR on ICs, MOSFET, signal lines of sensor units for consumer, V 5.0 V to 188 V WM computer, industrial, automotive, and telecommunication. P 1500 W PPM P 6.5 W MECHANICAL DATA D I (uni-directional only) 200 A Case: SMCG (DO-215AB) FSM Molding compound meets UL 94 V-0 flammability rating T max. 150 °C J Base P/N-E3 - RoHS compliant, industrial grade Polarity Uni-directional, bi-directional Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Package SMCG (DO-215AB) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix DEVICES FOR BI-DIRECTION APPLICATIONS meets JESD 201 class 2 whisker test For bi-directional devices use CA suffix (e.g. SMCG188CA). Polarity: for uni-directional types the band denotes cathode Electrical characteristics apply in both directions. end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) P 1500 W PPM Peak pulse current with a 10/1000 μs waveform (1) I See next table A PPM Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I 200 A FSM Power dissipation on infinite heatsink, T = 50 °C P 6.5 W A D Operating junction and storage temperature range T , T -55 to +150 °C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal Revision: 16-Jan-18 1 Document Number: 88457 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMCG5.0A thru SMCG188CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM DEVICE MARKING VOLTAGE TEST STAND-OFF DEVICE TYPE REVERSE PEAK PULSE CLAMPING CODE V AT I (1) CURRENT VOLTAGE MODIFIED  BR T LEAKAGE SURGE VOLTAGE AT GULL WING (V) IT VWM AT V CURRENT I (mA) (V) WM PPM UNI BI MIN. MAX. ID (μA) (3) IPPM (A) (2) VC (V) (+)SMCG5.0A (5) GDE GDE 6.40 7.07 10 5.0 1000 163.0 9.20 (+)SMCG6.0A GDG GDG 6.67 7.37 10 6.0 1000 145.6 10.3 (+)SMCG6.5A GDK BDK 7.22 7.98 10 6.5 500 133.9 11.2 (+)SMCG7.0A GDM GDM 7.78 8.60 10 7.0 200 125.0 12.0 (+)SMCG7.5A GDP BDP 8.33 9.21 1.0 7.5 100 116.3 12.9 (+)SMCG8.0A GDR BDR 8.89 9.83 1.0 8.0 50 110.3 13.6 (+)SMCG8.5A GDT BDT 9.44 10.4 1.0 8.5 20 104.2 14.4 (+)SMCG9.0A GDV BDV 10.0 11.1 1.0 9.0 10 97.4 15.4 (+)SMCG10A GDX BDX 11.1 12.3 1.0 10 5.0 88.2 17.0 (+)SMCG11A GDZ GDZ 12.2 13.5 1.0 11 5.0 82.4 18.2 (+)SMCG12A GEE BEE 13.3 14.7 1.0 12 5.0 75.4 19.9 (+)SMCG13A GEG GEG 14.4 15.9 1.0 13 1.0 69.8 21.5 (+)SMCG14A GEK BEK 15.6 17.2 1.0 14 1.0 64.7 23.2 (+)SMCG15A GEM BEM 16.7 18.5 1.0 15 1.0 61.5 24.4 (+)SMCG16A GEP GEP 17.8 19.7 1.0 16 1.0 57.7 26.0 (+)SMCG17A GER GER 18.9 20.9 1.0 17 1.0 54.3 27.6 (+)SMCG18A GET BET 20.0 22.1 1.0 18 1.0 51.4 29.2 (+)SMCG20A GEV BEV 22.2 24.5 1.0 20 1.0 46.3 32.4 (+)SMCG22A GEX BEX 24.4 26.9 1.0 22 1.0 42.3 35.5 (+)SMCG24A GEZ BEZ 26.7 29.5 1.0 24 1.0 38.6 38.9 (+)SMCG26A GFE BFE 28.9 31.9 1.0 26 1.0 35.6 42.1 (+)SMCG28A GFG BFG 31.1 34.4 1.0 28 1.0 33.0 45.4 (+)SMCG30A GFK BFK 33.3 36.8 1.0 30 1.0 31.0 48.4 (+)SMCG33A GFM BFM 36.7 40.6 1.0 33 1.0 28.1 53.3 (+)SMCG36A GFP BFP 40.0 44.2 1.0 36 1.0 25.8 58.1 (+)SMCG40A GFR BFR 44.4 49.1 1.0 40 1.0 23.3 64.5 (+)SMCG43A GFT BFT 47.8 52.8 1.0 43 1.0 21.6 69.4 (+)SMCG45A GFV GFV 50.0 55.3 1.0 45 1.0 20.6 72.7 (+)SMCG48A GFX GFX 53.3 58.9 1.0 48 1.0 19.4 77.4 (+)SMCG51A GFZ GFZ 56.7 62.7 1.0 51 1.0 18.2 82.4 (+)SMCG54A GGE GGE 60.0 66.3 1.0 54 1.0 17.2 87.1 (+)SMCG58A GGG GGG 64.4 71.2 1.0 58 1.0 16.0 93 (+)SMCG60A GGK GGK 66.7 73.7 1.0 60 1.0 15.5 96 (+)SMCG64A GGM GGM 71.1 78.6 1.0 64 1.0 14.6 103 (+)SMCG70A GGP GGP 77.8 86.0 1.0 70 1.0 13.3 113 (+)SMCG75A GGR GGR 83.3 92.1 1.0 75 1.0 12.4 121 (+)SMCG78A GGT GGT 86.7 95.8 1.0 78 1.0 11.9 126 (+)SMCG85A GGV GGV 94.4 104 1.0 85 1.0 10.9 137 (+)SMCG90A GGX GGX 100 111 1.0 90 1.0 10.3 146 (+)SMCG100A GGZ GGZ 111 123 1.0 100 1.0 9.3 162 (+)SMCG110A GHE GHE 122 135 1.0 110 1.0 8.5 177 (+)SMCG120A GHG GHG 133 147 1.0 120 1.0 7.8 193 (+)SMCG130A GHK GHK 144 159 1.0 130 1.0 7.2 209 (+)SMCG150A GHM GHM 167 185 1.0 150 1.0 6.2 243 (+)SMCG160A GHP GHP 178 197 1.0 160 1.0 5.8 259 (+)SMCG170A GHR GHR 189 209 1.0 170 1.0 5.5 275 SMCG188A GHS GHS 209 231 1.0 188 1.0 4.6 328 Notes (1) Pulse test: tp  50 ms (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bi-directional types having V of 10 V and less, the I limit is doubled WM D (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMCG5.0CA, the maximum V is 7.25 V BR (6) V = 3.5 V at I = 100 A (uni-directional only) F F (+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices Revision: 16-Jan-18 2 Document Number: 88457 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMCG5.0A thru SMCG188CA www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient (1) R 75 JA °C/ W Typical thermal resistance, junction to lead R 15 JL Note (1) Measured on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMCG5.0A-E3/57T 0.211 57T 850 7" diameter plastic tape and reel SMCG5.0A-E3/9AT 0.211 9AT 3500 13" diameter plastic tape and reel SMCG5.0AHE3/57T (1) 0.211 57T 850 7" diameter plastic tape and reel SMCG5.0AHE3/9AT (1) 0.211 9AT 3500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (T = 25 °C unless otherwise noted) A 100 150 T = 25 °C J )W RSM tr = 10 µs iPsu dlseefi nWeidd tahs ( tthd)e Point k( rewo 10 ent, % I 100 PIPePaMkValue wdehcearyes t htoe 5P0e a%k oCfu IrPrPeMnt P es Curr luP ka Pulse IHPaPlMf Value - IP2P eP - PMPP 1 0.31C xo 0p.p3e1r" P(8a.d0 Ax r8e.a0s mm) - Peak PM 50 1a0s/1d0e0fi0neµds bWyaRv.eEfo.Arm. P I t d 0.1 0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 2.0 3.0 4.0 td - Pulse Width (s) t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 100 20 000 )I( tnPP F)10 000 MZeeraos Buiraesd at e% p rruC ro )P( rewoP esluP kPP ,egatnecreP ni gnitareD 752505 C - Junction Capacitance (J1100000 SVVoRtal,t naMdge-eOa UBVsffinuW-Dir-MeDirdeir ceatctiotinoanlal Tf =J =1 .205 M °CHz a V = 50 mVp-p e sig P 0 10 0 25 50 75 100 125 150 175 200 1 10 100 400 TJ - Initial Temperature (°C) VWM - Reverse Stand-Off Voltage (V) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 4 - Typical Junction Capacitance Uni-Directional Revision: 16-Jan-18 3 Document Number: 88457 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMCG5.0A thru SMCG188CA www.vishay.com Vishay General Semiconductor 100 200 )W /C A) °( ecna 10 urrent ( 100 d C ep e m g I lam d Sur reh 1.0 war T tne k For isna Pea T8.J3 = m TsJ Smianxg.le Half Sine-Wave rT 0.1 10 0.001 0.01 0.1 1 10 100 1000 1 10 100 tp - Pulse Duration (s) Number of Cycles at 60 Hz Fig. 5 - Typical Transient Thermal Impedance Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Use Only PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMCG (DO-215AB) Cathode Band Mounting Pad Layout 0.310(7.87) 0.125(3.17) 0.245(6.22) 0.115(2.92) 0.220(5.59) 0.125(3.17) 0.050(1.27) 0.280(7.11) 0.260(6.60) 0.008(0.20) 0.016(0.41) 0.095(2.41) 0.002(0.05) 0.006(0.15) 0.075(1.90) 0.058(1.47) 0.020 0.038(0.97) 0.040 (1.02) Seating Plane (0.51)Max. 0.024 (0.61) 0.400(10.16) 0.380(9.64) Revision: 16-Jan-18 4 Document Number: 88457 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000