Transient Voltage Suppression Diodes Surface Mount – 600W > SMBJ series SMBJ Series RoHS Pb e3 Uni-directional Description The SMBJ is designed specifically to protect sensitive Bi-directional electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 600W peak pulse power • Built-in strain relief capability at 10/1000μs • Fast response time: waveform, repetition rate typically less than 1.0ps (duty cycles):0.01% from 0V to BV min Agency Approvals • Excellent clamping • High temperature capability to reflow soldering AGENCY AGENCY FILE NUMBER • Low incremental surge guaranteed: 260°C/40sec E230531 resistance • V @ T= V @25°C BR J BR • Typical I less than 1μA x (1+αT x (T - 25)) Maximum Ratings and Thermal Characteristics R J when V min>12V (αT:Temperature (T =25OC unless otherwise noted) BR A • For surface mounted Coefficient, typical value Parameter Symbol Value Unit applications to optimize is 0.1%) Peak Pulse Power Dissipation at board space • Plastic package is T =25ºC by 10/1000µs Waveform P 600 W • Low profile package flammability rated V-0 per A PPM (Fig.2)(Note 1), (Note 2), (Note 5) UL-94 • Typical failure mode is a Power Dissipation on Infinite Heat P 5.0 W short circuit condition for • Meet MSL level1, per Sink at TL=50OC D current events exceeding J-STD-020, lead-frame Peak Forward Surge Current, 8.3ms component rating maximun peak of 260°C I 100 A Single Half Sine Wave (Note 3) FSM • Whisker test is conducted • Matte tin lead–free plated Maximum Instantaneous Forward based on JEDEC • Halogen free and RoHS Voltage at 50A for Unidirectional V 3.5/5.0 V Only (Note 4) F JESD201A per its table 4a compliant and 4c Operating Temperature Range T -65 to 150 °C • Pb-free E3 means 2nd J • IEC-61000-4-2 ESD level interconnect is Storage Temperature Range T -65 to 175 °C STG 30kV(Air), 30kV (Contact) Pb-free and the terminal Typical Thermal Resistance Junction R 20 °C/W • EFT protection of data finish material is tin(Sn) to Lead θJL lines in accordance with (IPC/JEDEC J-STD- Typical Thermal Resistance Junction IEC 61000-4-4 609A.01) R 100 °C/W to Ambient θJA Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) =25OC per Fig. 3. J 2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal. Applications 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. TVS devices are ideal for the protection of I/O Interfaces, 4. V < 3.5V for single die parts and V< 5.0V for stacked-die parts. V bus and other vulnerable circuits used in Telecom, F F CC 5. The P of stacked-die parts is 800W; please contact Littelfuse for details on the Computer, Industrial and Consumer electronic PPM stacked-die components. applications. ® Functional Diagram Additional Infomarion Bi-directional Datasheet Resources Samples Cathode Anode Uni-directional © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/07/17

Transient Voltage Suppression Diodes Surface Mount – 600W > SMBJ series Electrical Characteristics (T=25°C unless otherwise noted) A Reverse Breakdown Test Maximum Maximum Maximum Maximum Agency Part Part Marking Stand off Voltage V Current Clamping Peak Reverse Temperature Recognition Number Number BR Voltage V Pulse Current Leakage I (Uni) (Bi) Vo(lVtaogltes )VR (Volts) @ IT IT @ Ipp C Ipp (A) at @ VR R coVeffi c(%ien/Ct )of UNI BI MIN MAX (mA) (V) at 10/1000 10/1000 (µA) BR SMBJ5.0A SMBJ5.0CA KE AE 5.0 6.40 7.00 10 9.2 65.3 800 0.041 X SMBJ6.0A SMBJ6.0CA KG AG 6.0 6.67 7.37 10 10.3 58.3 800 0.046 X SMBJ6.5A SMBJ6.5CA KK AK 6.5 7.22 7.98 10 11.2 53.6 500 0.052 X SMBJ7.0A SMBJ7.0CA KM AM 7.0 7.78 8.60 10 12.0 50.0 200 0.058 X SMBJ7.5A SMBJ7.5CA KP AP 7.5 8.33 9.21 1 12.9 46.6 100 0.061 X SMBJ8.0A SMBJ8.0CA KR AR 8.0 8.89 9.83 1 13.6 44.2 50 0.064 X SMBJ8.5A SMBJ8.5CA KT AT 8.5 9.44 10.40 1 14.4 41.7 20 0.066 X SMBJ9.0A SMBJ9.0CA KV AV 9.0 10.00 11.10 1 15.4 39.0 10 0.069 X SMBJ10A SMBJ10CA KX AX 10.0 11.10 12.30 1 17.0 35.3 5 0.071 X SMBJ11A SMBJ11CA KZ AZ 11.0 12.20 13.50 1 18.2 33.0 1 0.074 X SMBJ12A SMBJ12CA LE BE 12.0 13.30 14.70 1 19.9 30.2 1 0.075 X SMBJ13A SMBJ13CA LG BG 13.0 14.40 15.90 1 21.5 28.0 1 0.076 X SMBJ14A SMBJ14CA LK BK 14.0 15.60 17.20 1 23.2 25.9 1 0.08 X SMBJ15A SMBJ15CA LM BM 15.0 16.70 18.50 1 24.4 24.6 1 0.083 X SMBJ16A SMBJ16CA LP BP 16.0 17.80 19.70 1 26.0 23.1 1 0.084 X SMBJ17A SMBJ17CA LR BR 17.0 18.90 20.90 1 27.6 21.8 1 0.085 X SMBJ18A SMBJ18CA LT BT 18.0 20.00 22.10 1 29.2 20.6 1 0.088 X SMBJ20A SMBJ20CA LV BV 20.0 22.20 24.50 1 32.4 18.6 1 0.091 X SMBJ22A SMBJ22CA LX BX 22.0 24.40 26.90 1 35.5 16.9 1 0.092 X SMBJ24A SMBJ24CA LZ BZ 24.0 26.70 29.50 1 38.9 15.5 1 0.092 X SMBJ26A SMBJ26CA ME CE 26.0 28.90 31.90 1 42.1 14.3 1 0.093 X SMBJ28A SMBJ28CA MG CG 28.0 31.10 34.40 1 45.4 13.3 1 0.094 X SMBJ30A SMBJ30CA MK CK 30.0 33.30 36.80 1 48.4 12.4 1 0.096 X SMBJ33A SMBJ33CA MM CM 33.0 36.70 40.60 1 53.3 11.3 1 0.097 X SMBJ36A SMBJ36CA MP CP 36.0 40.00 44.20 1 58.1 10.4 1 0.098 X SMBJ40A SMBJ40CA MR CR 40.0 44.40 49.10 1 64.5 9.3 1 0.099 X SMBJ43A SMBJ43CA MT CT 43.0 47.80 52.80 1 69.4 8.7 1 0.1 X SMBJ45A SMBJ45CA MV CV 45.0 50.00 55.30 1 72.7 8.3 1 0.101 X SMBJ48A SMBJ48CA MX CX 48.0 53.30 58.90 1 77.4 7.8 1 0.101 X SMBJ51A SMBJ51CA MZ CZ 51.0 56.70 62.70 1 82.4 7.3 1 0.101 X SMBJ54A SMBJ54CA NE DE 54.0 60.00 66.30 1 87.1 6.9 1 0.102 X SMBJ58A SMBJ58CA NG DG 58.0 64.40 71.20 1 93.6 6.5 1 0.103 X SMBJ60A SMBJ60CA NK DK 60.0 66.70 73.70 1 96.8 6.2 1 0.103 X SMBJ64A SMBJ64CA NM DM 64.0 71.10 78.60 1 103.0 5.9 1 0.104 X SMBJ70A SMBJ70CA NP DP 70.0 77.80 86.00 1 113.0 5.3 1 0.105 X SMBJ75A SMBJ75CA NR DR 75.0 83.30 92.10 1 121.0 5.0 1 0.106 X SMBJ78A SMBJ78CA NT DT 78.0 86.70 95.80 1 126.0 4.8 1 0.106 X SMBJ85A SMBJ85CA NV DV 85.0 94.40 104.00 1 137.0 4.4 1 0.106 X SMBJ90A SMBJ90CA NX DX 90.0 100.00 111.00 1 146.0 4.1 1 0.107 X SMBJ100A SMBJ100CA NZ DZ 100.0 111.00 123.00 1 162.0 3.7 1 0.107 X SMBJ110A SMBJ110CA PE EE 110.0 122.00 135.00 1 177.0 3.4 1 0.107 X SMBJ120A SMBJ120CA PG EG 120.0 133.00 147.00 1 193.0 3.1 1 0.108 X SMBJ130A SMBJ130CA PK EK 130.0 144.00 159.00 1 209.0 2.9 1 0.108 X SMBJ150A SMBJ150CA PM EM 150.0 167.00 185.00 1 243.0 2.5 1 0.108 X SMBJ160A SMBJ160CA PP EP 160.0 178.00 197.00 1 259.0 2.3 1 0.108 X SMBJ170A SMBJ170CA PR ER 170.0 189.00 209.00 1 275.0 2.2 1 0.108 X SMBJ180A SMBJ180CA PT ET 180.0 201.00 222.00 1 292.0 2.1 1 0.108 X SMBJ188A SMBJ188CA PB EB 188.0 209.00 231.00 1 304.0 2.0 1 0.11 X SMBJ200A SMBJ200CA PV EV 200.0 224.00 247.00 1 324.0 1.9 1 0.11 X SMBJ220A SMBJ220CA PX EX 220.0 246.00 272.00 1 356.0 1.7 1 0.11 X SMBJ250A SMBJ250CA PZ EZ 250.0 279.00 309.00 1 405.0 1.5 1 0.11 X SMBJ300A* SMBJ300CA* QE FE 300.0 335.00 371.00 1 486.0 1.3 1 0.112 SMBJ350A* SMBJ350CA* QG FG 350.0 391.00 432.00 1 567.0 1.1 1 0.112 SMBJ400A* SMBJ400CA* QK FK 400.0 447.00 494.00 1 648.0 0.9 1 0.112 SMBJ440A* SMBJ440CA* QM FM 440.0 492.00 543.00 1 713.0 0.9 1 0.112 For bidirectional type having V of 10 volts and less, the I limit is double. Components marked with “*”R use stacked-die, thereforeR they have a higher surge capability (typical 1.8*I ). PP © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/07/17

Transient Voltage Suppression Diodes Surface Mount – 600W > SMBJ series I-V Curve Characteristics Uni-directional Bi-directional Ipp IT Vc VBRVR V Vc VBRVR IR V IRVF IR VRVBRVc IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified I (peak impulse current) C PPM I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F Ratings and Characteristic Curves (T=25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Voltage Transients 100 W) TJ initial = TAMB k Voltage Across TVS er ( 10 stacked-die, 800W nt w at 10/1000µs, 25°C Voltage or Curre Current Through TVS eak Pulse Po 1 Sati n1g0l/e1 0d0ie0,µ6s0,0 2W5° C P -M P PP 0.1 0.001 0.01 0.1 1 10 t-Pulse Width (ms) Time d continues on next page. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/07/17

Transient Voltage Suppression Diodes Surface Mount – 600W > SMBJ series Ratings and Characteristic Curves (T=25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 100 150 Pulse Power (P) or Current (I)PPPPDerating in Percentage % 24680000 - Peak Pulse Current, % IMRSM 15000 tr=1PI0PeµPasMke cVaHIlPuaPelMf Va(lI Pu P1a2eTPac0sM usuJ / rd1=)ltrsh02eeee50nfi W °0tpnC dµioedeisdtnceh tabc( wyt.yds hW ) R teiosar. E ev5d .0eteAh%ffieon orpemfde IaPkP M ak IPP e P td 0 0 0 25 50 75 100 125 150 175 0 1.0 2.0 3.0 4.0 TJ - Initial Junction Temperature (ºC) t-Time (ms) Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 1000 W) C/ e (° 100 nc a d e p m al I 10 m er h T nt 1 e nsi a Tr 0.1 0.001 0.01 0.1 1 10 100 1000 T -Pulse Duration (s) P Figure 7 - Maximum Non-Repetitive Peak Forward Figure 8 - Peak Forward Voltage Drop vs Peak Forward Surge Current Uni-Directional Only Current (Typical Values) 120 100.0 A) Single die nt ( 100 e urr A) urge C 80 Current( 10.0 Stacked-die S d d 60 ar k Forwar 40 Peak Forw 1.0 - PeaM 20 -IF IFS 0 1 10 100 0.1 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 Number of Cycles at 60 Hz VF-Peak Forward Voltage(V) © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/07/17

Transient Voltage Suppression Diodes Surface Mount – 600W > SMBJ series Soldering Parameters Lead–free Reflow Condition assembly TP tp - Temperature Min (T ) 150°C s(min) Ramp-up Critical Zone Pre Heat -- TTeimmep e(mraitnu rteo Mmaaxx) ((Ttss()max)) 6200 0–° C180 secs (T)ure Ts(mTaLx) tL TL to TP Atov epreaagke ramp up rate (Liquidus Temp (TA) 3°C/second max TemperatTs(min) Prethseat Ramp-down T to T - Ramp-up Rate 3°C/second max S(max) A - Temperature (T ) (Liquidus) 217°C Reflow A 25˚C t 25˚C to Peak - Time (min to max) (t) 60 – 150 seconds Time (t) s Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Temperature (t) p Ramp-down Rate 6°C/second max Environmental Specifications Time 25°C to peak Temperature (T) 8 minutes Max. P Do not exceed 260°C High Temp. Storage JESD22-A103 Physical Specifications HTRB JESD22-A108 0.003 ounce, 0.093 grams Weight Temperature Cycling JESD22-A104 JEDEC DO214AA. Molded plastic body Case over glass passivated junction MSL JEDEC-J-STD-020, Level 1 Color band denotes cathode except Polarity Bidirectional H3TRB JESD22-A101 Matte Tin-plated leads, Solderable per Terminal JESD22-B102 RSH JESD22-A111 Dimensions DO-214AA (SMB J-Bend) Inches Millimeters Cathode Band Dimensions (for Uni-directional products only) Min Max Min Max A 0.076 0.086 1.930 2.200 A C B 0.160 0.187 4.060 4.750 C 0.130 0.155 3.300 3.940 B D 0.078 0.103 1.990 2.610 E 0.030 0.060 0.760 1.520 H F - 0.008 - 0.203 D G 0.205 0.220 5.210 5.590 F H 0.006 0.012 0.152 0.305 E G I 0.089 - 2.260 - J K L J 0.085 - 2.160 - K - 0.107 - 2.740 L 0.085 - 2.160 - I Solder Pads (all dimensions in mm) © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/07/17

Transient Voltage Suppression Diodes Surface Mount – 600W > SMBJ series Part Numbering System Part Marking System SMBJ XXX C A Cathode Band (for uni-directional products only) F Littelfuse Logo 5% V VOLTAGE TOLERANCE BR BI-DIRECTIONAL XX V VOLTAGE Marking Code R YMXXX SERIES Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Component Packaging Part number Quantity Packaging Specification Package Option SMBJxxxXX DO-214AA 3000 Tape & Reel - 12mm tape/13” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.47 (12.0) Cathode 0.315 0.059 DIA Cover tape (8.0) (1.5) 13.0 (330) Dimensions are in inches 0.80 (20.2) (and millimeters). Arbor Hole Dia. Direction of Feed 0.49 (12.5) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/07/17