SMAJ5.0 THRU SMAJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 400 Watts SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features DO-214AC/SMA  For surface mounted applications in order to optimize board space  Low profile package  Built-in strain relief  Glass passivated junction 00..006571 ((11..7300)) 00..101904((22..8400))  Low inductance  Excellent clamping capability  400W peak pulse power capability at 10/1000μs waveform, 00..117577((43..5909))  Repetition rate (duty cycle): 0.01% 0.012(0.305)  Fast response time 0.006(0.152)  Typical IR less than 1μA above 10V 0.096(2.42)  High Temperature soldering: 260℃/10 seconds at terminals 0.078(1.98)  Plastic package has underwriters laboratory flammability 94V-0 0.060(1.52) 0.030(0.76) 0.008(0.203)MAX. 0.208(5.30) Mechanical Data 0.188(4.80) Case(cid:3): JEDEC DO-214AC/SMA molded plastic body Terminals(cid:3): Solderable per MIL-STD-750,Method 2026(cid:3) Polarity(cid:3): Polarity symbol marking on body Dimensions in inches and (millimeters) (cid:3): Any Mounting Position Weight : 0.07 grams Marking : Date Code and Marking Code See Page 3 Applications I/Ointerface AC/DCpo w ersupply Lowfrequencysignaltransmissionline(RS232,RS485,etc.) MAXIMUM RATINGS AND CHARACTERISTICS Ratingsat25℃ ambienttemperatureunlessotherwisespecified. Peak pulse power dissipation at 10/1000μswaveform P Minimum 400 W (Note1, Note2, Fig.1) PPM Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3) I See Table A PPM Steady state power dissipation atTA=50℃(Fig.5) PM(AV) 3.3 W Peak forward surge current, 8.3ms single halfsine-wave I 40 A superimposed on rated load, (JEDEC Method) (Note3, Fig.6) FSM Operating junction and Storage Temperature Range. T ,T -65 to +150 ℃ J STG Typicalthermal resistance junction to lead RθJL 30 ℃/W Typicalthermal resistance junction to ambient RθJA 120 ℃/W Notes:1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2. 2. Mounted on 5.0mm×5.0mm (0.03mm thick)copper pads to eachterminal. 3. 8.3mssinglehalfsine-wave,orequivalentsquarewave,dutycycle=4pulsesperminutesmaximum. DN:T20515A0 http://www.microdiode.com Rev:2020A0 Page :1

SMAJ5.0 THRU SMAJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 400 Watts Electrical Characteristics (TA=25℃℃) Maximum Device Reverse Breakdown Peak Reverse Test Clamping PartNumber Marking Stand-Off Voltage Pulse Leakage Current Voltage Code Voltage @IT @IPP Current @VRWM Unidirectional Bidirectional UNI BI VRWM(V) VBR(V) IT(mA) VC(V) IPP(A) IR(μA) SMAJ5.0A SMAJ5.0CA AE WE 5.0 6.40~7.00 10 9.2 43.5 800 SMAJ6.0A SMAJ6.0CA AG WG 6.0 6.67~7.37 10 10.3 38.8 800 SMAJ6.5A SMAJ6.5CA AK WK 6.5 7.22~7.98 10 11.2 35.7 500 SMAJ7.0A SMAJ7.0CA AM WM 7.0 7.78~8.60 10 12.0 33.3 200 SMAJ7.5A SMAJ7.5CA AP WP 7.5 8.33~9.21 1 12.9 31.0 100 SMAJ8.0A SMAJ8.0CA AR WR 8.0 8.89~9.83 1 13.6 29.4 50 SMAJ8.5A SMAJ8.5CA AT WT 8.5 9.44~10.40 1 14.4 27.8 20 SMAJ9.0A SMAJ9.0CA AV WV 9.0 10.00~11.10 1 15.4 26.0 10 SMAJ10A SMAJ10CA AX WX 10.0 11.10~12.30 1 17.0 23.5 5 SMAJ11A SMAJ11CA AZ WZ 11.0 12.20~13.50 1 18.2 22.0 1 SMAJ12A SMAJ12CA BE XE 12.0 13.30~14.70 1 19.9 20.1 1 SMAJ13A SMAJ13CA BG XG 13.0 14.40~15.90 1 21.5 18.6 1 SMAJ14A SMAJ14CA BK XK 14.0 15.60~17.20 1 23.2 17.2 1 SMAJ15A SMAJ15CA BM XM 15.0 16.70~18.50 1 24.4 16.4 1 SMAJ16A SMAJ16CA BP XP 16.0 17.80~19.70 1 26.0 15.4 1 SMAJ17A SMAJ17CA BR XR 17.0 18.90~20.90 1 27.6 14.5 1 SMAJ18A SMAJ18CA BT XT 18.0 20.00~22.10 1 29.2 13.7 1 SMAJ20A SMAJ20CA BV XV 20.0 22.20~24.50 1 32.4 12.3 1 SMAJ22A SMAJ22CA BX XX 22.0 24.40~26.90 1 35.5 11.3 1 SMAJ24A SMAJ24CA BZ XZ 24.0 26.70~29.50 1 38.9 10.3 1 SMAJ26A SMAJ26CA CE YE 26.0 28.90~31.90 1 42.1 9.5 1 SMAJ28A SMAJ28CA CG YG 28.0 31.10~34.40 1 45.4 8.8 1 SMAJ30A SMAJ30CA CK YK 30.0 33.30~36.80 1 48.4 8.3 1 SMAJ33A SMAJ33CA CM YM 33.0 36.70~40.60 1 53.3 7.5 1 SMAJ36A SMAJ36CA CP YP 36.0 40.00~44.20 1 58.1 6.9 1 SMAJ40A SMAJ40CA CR YR 40.0 44.40~49.10 1 64.5 6.2 1 SMAJ43A SMAJ43CA CT YT 43.0 47.80~52.80 1 69.4 5.8 1 SMAJ45A SMAJ45CA CV YV 45.0 50.00~55.30 1 72.7 5.5 1 SMAJ48A SMAJ48CA CX YX 48.0 53.30~58.90 1 77.4 5.2 1 SMAJ51A SMAJ51CA CZ YZ 51.0 56.70~62.70 1 82.4 4.9 1 SMAJ54A SMAJ54CA RE ZE 54.0 60.00~66.30 1 87.1 4.6 1 SMAJ58A SMAJ58CA RG ZG 58.0 64.40~71.20 1 93.6 4.3 1 SMAJ60A SMAJ60CA RK ZK 60.0 66.70~73.70 1 96.8 4.1 1 SMAJ64A SMAJ64CA RM ZM 64.0 71.10~78.60 1 103.0 3.9 1 SMAJ70A SMAJ70CA RP ZP 70.0 77.80~86.00 1 113.0 3.5 1 SMAJ75A SMAJ75CA RR ZR 75.0 83.30~92.10 1 121.0 3.3 1 SMAJ78A SMAJ78CA RT ZT 78.0 86.70~95.80 1 126.0 3.2 1 SMAJ85A SMAJ85CA RV ZV 85.0 94.40~104.00 1 137.0 2.9 1 SMAJ90A SMAJ90CA RX ZX 90.0 100.00~111.00 1 146.0 2.7 1 SMAJ100A SMAJ100CA RZ ZZ 100.0 111.00~123.00 1 162.0 2.5 1 SMAJ110A SMAJ110CA SE VE 110.0 122.00~135.00 1 177.0 2.3 1 SMAJ120A SMAJ120CA SG VG 120.0 133.00~147.00 1 193.0 2.1 1 https://www.microdiode.com Rev:2020A0 Page :2

SMAJ5.0 THRU SMAJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 400 Watts Electrical Characteristics (TA=25℃℃) Maximum Device Reverse Breakdown Peak Reverse Test Clamping PartNumber Marking Stand-Off Voltage Pulse Leakage Current Voltage Code Voltage @IT @IPP Current @VRWM Unidirectional Bidirectional UNI BI VRWM(V) VBR(V) IT(mA) VC(V) IPP(A) IR(μA) SMAJ120A SMAJ120CA SG VG 120.0 133.00~147.00 1 193.0 2.1 1 SMAJ130A SMAJ130CA SK VK 130.0 144.00~159.00 1 209.0 1.9 1 SMAJ150A SMAJ150CA SM VM 150.0 167.00~185.00 1 243.0 1.6 1 SMAJ160A SMAJ160CA SP VP 160.0 178.00~197.00 1 259.0 1.5 1 SMAJ170A SMAJ170CA SR VR 170.0 189.00~209.00 1 275.0 1.5 1 SMAJ180A SMAJ180CA ST VT 180.0 201.00~222.00 1 292.0 1.4 1 SMAJ190A SMAJ190CA SU YU 190.0 211.00~233.00 1 308.0 1.3 1 SMAJ200A SMAJ200CA SV VV 200.0 224.00~247.00 1 324.0 1.2 1 SMAJ210A SMAJ210CA SW YW 210.0 237.00~263.00 1 340.0 1.2 1 SMAJ220A SMAJ220CA GE VX 220.0 246.00~272.00 1 356.0 1.1 1 SMAJ250A SMAJ250CA SZ VZ 250.0 279.00~309.00 1 405.0 1.0 1 SMAJ300A SMAJ300CA TE UE 300.0 335.00~371.00 1 486.0 0.8 1 SMAJ350A SMAJ350CA TG UG 350.0 391.00~432.00 1 567.0 0.7 1 SMAJ400A SMAJ400CA TK UK 400.0 447.00~494.00 1 648.0 0.6 1 SMAJ440A SMAJ440CA TM UM 440.0 492.00~543.00 1 713.0 0.6 1 Notes:ForbidirectionaltypehavingV of10Vandless,theI limitisdouble. RWM R Figure1.PeakPulsePowerRatingCurve Figure2.PulseDeratingCurve 100 W) k er ( 80 w o P se 60 ul P k ea 40 P - M PPP 20 0 0 25 50 75 100 125 150 175 TA-Ambient Temperature(℃) Figure3.PulseWaveform Figure4.TypicalJunctionCapacitance M RS %I nt, e urr C e s ul P k a e P - M IPP http://www.microdiode.com Rev:2020A0 Page :3

SMAJ5.0 THRU SMAJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 400 Watts Figure5.SteadyStatePowerDissipationDerating Figure6.MaximumNon-RepetitiveForward Curve SurgeCurrentUni-DirectionalOnly ReflowSoldering RecommendedConditions ProfileFeature Pb-FreeAssembly Averageramp-uprate(T toT ) 3℃/secondmax. L P Preheat -TemperatureMin(T ) 150℃ Smin -TemperatureMax(T ) 200℃ Smax -Time(mintomax)(t ) 60-180seconds S T toT Smax L -Ramp-upRate 3℃/secondmax. Timemaintainedabove: -Temperature(T ) 217℃ L -Time(t ) 60-150seconds L PeakTemperature(T ) 260℃ P Timewithin5℃ofactualPeakTemperature(t ) 20-40seconds P Ramp-downRate 6℃/secondmax. Time25℃toPeakTemperature 8minutesmax. The curve above is for reference only. htts://www.microdiode.com Rev:2020A0 Page :4

SMAJ5.0 THRU SMAJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 400 Watts Packing information unit:mm P0 P1 Item Symbol Tolerance SMA d E Carrierwidth A 0.1 2.80 F Carrierlength B 0.1 5.33 B W Carrierdepth C 0.1 2.36 Sprockethole d 0.05 1.50 13"Reeloutsidediameter D 2.0 330.00 13"Reelinnerdiameter D1 min 50.00 A P 7"Reeloutsidediameter D 2.0 178.00 7"Reelinnerdiameter D1 min 62.00 Feedholediameter D2 0.5 13.00 Sprocketholeposition E 0.1 1.75 D2 D1 Punchholeposition F 0.1 5.50 T Punchholepitch P 0.1 4.00 C Sprocketholepitch P0 0.1 4.00 Embossmentcenter P1 0.1 2.00 D W1 OTavpeerawllitdatphethickness WT 00..31 102..2080 Reelwidth W1 1.0 18.00 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing COMPONENT INNER REEL CARTON APPROX. PACKAGE REELSIZE REEL SPACING BOX BOX DIA, SIZE CARTON GROSS WEIGHT (pcs) (m/m) (pcs) (m/m) (m/m) (m/m) (pcs) (kg) SMA 7" 2,000 4.0 4,000 183*155*183 178 382*356*392 80,000 12.0 SMA 11" 5,000 4.0 10,000 290*290*38 330 310*310*360 80,000 11.0 SMA 13" 7,500 4.0 15,000 335*335*38 330 350*330*360 120,000 14.5 Suggested Pad Layout Symbol Unit(mm) Unit(inch) A 1.68 0.066 B 1.52 0.060 C 3.90 0.154 D 2.41 0.095 E 5.45 0.215 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). http://www.microdiode.com Rev:2020A0 Page :5