SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a Available 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 78 V) • Excellent clamping capability SMA (DO-214AC) • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 PRIMARY CHARACTERISTICS • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 V uni-directional 6.40 V to 231 V BR V bi-directional 6.40 V to 231 V TYPICAL APPLICATIONS BR VWM 5.0 V to 188 V Use in sensitive electronics protection against voltage P 400 W, 300 W transients induced by inductive load switching and lighting PPM I 40 A on ICs, MOSFET, signal lines of sensor units for consumer, FSM computer, industrial, automotive, and telecommunication. T max. 150 °C J Polarity Uni-directional, bi-directional MECHANICAL DATA Package SMA (DO-214AC) Case: SMA (DO-214AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade DEVICES FOR BI-DIRECTION APPLICATIONS Base P/NHE3 - RoHS-compliant and AEC-Q101 qualified Base P/NHM3 - halogen-free, RoHS-compliant, and For bi-directional use CA suffix (e.g. SMAJ10CA). AEC-Q101 qualified Electrical characteristics apply in both directions. Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for uni-directional types the band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) P 400 W PPM Peak pulse current with a waveform (1) I See next table A PPM Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I 40 A FSM Operating junction and storage temperature range T , T -55 to +150 °C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2. Rating is 300 W above 78 V A (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal Revision: 14-Jul-17 1 Document Number: 88390 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM DEVICE MARKING VOLTAGE TEST STAND-OFF REVERSE PEAK PULSE CLAMPING CODE V AT I (1) CURRENT VOLTAGE DEVICE TYPE BR T LEAKAGE SURGE VOLTAGE AT (V) IT VWM AT V CURRENT I (mA) (V) WM PPM UNI BI MIN. MAX. ID (μA) (3) IPPM (A) (2) VC (V) SMAJ5.0A (5) AE WE 6.40 7.07 10 5.0 800 43.5 9.2 SMAJ6.0A AG WG 6.67 7.37 10 6.0 800 38.8 10.3 SMAJ6.5A AK WK 7.22 7.98 10 6.5 500 35.7 11.2 SMAJ7.0A AM WM 7.78 8.60 10 7.0 200 33.3 12.0 SMAJ7.5A AP WP 8.33 9.21 1.0 7.5 100 31.0 12.9 SMAJ8.0A AR WR 8.89 9.83 1.0 8.0 50 29.4 13.6 SMAJ8.5A AT WT 9.44 10.4 1.0 8.5 10 27.8 14.4 SMAJ9.0A AV WV 10.0 11.1 1.0 9.0 5.0 26.0 15.4 SMAJ10A AX WX 11.1 12.3 1.0 10 1.0 23.5 17.0 SMAJ11A AZ WZ 12.2 13.5 1.0 11 1.0 22.0 18.2 SMAJ12A BE XE 13.3 14.7 1.0 12 1.0 20.1 19.9 SMAJ13A BG XG 14.4 15.9 1.0 13 1.0 18.6 21.5 SMAJ14A BK XK 15.6 17.2 1.0 14 1.0 17.2 23.2 SMAJ15A BM XM 16.7 18.5 1.0 15 1.0 16.4 24.4 SMAJ16A BP XP 17.8 19.7 1.0 16 1.0 15.4 26.0 SMAJ17A BR XR 18.9 20.9 1.0 17 1.0 14.5 27.6 SMAJ18A BT XT 20.0 22.1 1.0 18 1.0 13.7 29.2 SMAJ20A BV XV 22.2 24.5 1.0 20 1.0 12.3 32.4 SMAJ22A BX XX 24.4 26.9 1.0 22 1.0 11.3 35.5 SMAJ24A BZ XZ 26.7 29.5 1.0 24 1.0 10.3 38.9 SMAJ26A CE YE 28.9 31.9 1.0 26 1.0 9.5 42.1 SMAJ28A CG YG 31.1 34.4 1.0 28 1.0 8.8 45.4 SMAJ30A CK YK 33.3 36.8 1.0 30 1.0 8.3 48.4 SMAJ33A CM YM 36.7 40.6 1.0 33 1.0 7.5 53.3 SMAJ36A CP YP 40.0 44.2 1.0 36 1.0 6.9 58.1 SMAJ40A CR YR 44.4 49.1 1.0 40 1.0 6.2 64.5 SMAJ43A CT YT 47.8 52.8 1.0 43 1.0 5.8 69.4 SMAJ45A CV YV 50.0 55.3 1.0 45 1.0 5.5 72.7 SMAJ48A CX YX 53.3 58.9 1.0 48 1.0 5.2 77.4 SMAJ51A CZ YZ 56.7 62.7 1.0 51 1.0 4.9 82.4 SMAJ54A RE ZE 60.0 66.3 1.0 54 1.0 4.6 87.1 SMAJ58A RG ZG 64.4 71.2 1.0 58 1.0 4.3 93.6 SMAJ60A RK ZK 66.7 73.7 1.0 60 1.0 4.1 96.8 SMAJ64A RM ZM 71.1 78.6 1.0 64 1.0 3.9 103 SMAJ70A RP ZP 77.8 86.0 1.0 70 1.0 3.5 113 SMAJ75A RR ZR 83.3 92.1 1.0 75 1.0 3.3 121 SMAJ78A RT ZT 86.7 95.8 1.0 78 1.0 3.2 126 SMAJ85A RV ZV 94.4 104 1.0 85 1.0 2.2 137 SMAJ90A RX ZX 100 111 1.0 90 1.0 2.1 146 SMAJ100A RZ ZZ 111 123 1.0 100 1.0 1.9 162 SMAJ110A SE VE 122 135 1.0 110 1.0 1.7 177 SMAJ120A VG VG 133 147 1.0 120 1.0 1.6 193 SMAJ130A VK VK 144 159 1.0 130 1.0 1.4 209 SMAJ150A VM VM 167 185 1.0 150 1.0 1.2 243 SMAJ160A SP VP 178 197 1.0 160 1.0 1.2 259 SMAJ170A SR VR 189 209 1.0 170 1.0 1.09 275 SMAJ188A SS VS 209 231 1.0 188 1.0 0.91 328 Notes (1) Pulse test: t ≤ 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bi-directional types having V of 10 V and less, the I limit is doubled WM D (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMAJ5.0CA, the maximum V is 7.25 V BR (6) V = 3.5 V at I = 25 A (uni-directional only) F F Revision: 14-Jul-17 2 Document Number: 88390 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient (1) RθJA 120 °C/W Typical thermal resistance, junction to lead RθJL 30 °C/W Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMAJ5.0A-E3/61 0.064 61 1800 7" diameter plastic tape and reel SMAJ5.0A-E3/5A 0.064 5A 7500 13" diameter plastic tape and reel SMAJ5.0AHE3/61(1) 0.064 61 1800 7" diameter plastic tape and reel SMAJ5.0AHE3/5A (1) 0.064 5A 7500 13" diameter plastic tape and reel SMAJ5.0A-M3/61 0.064 61 1800 7" diameter plastic tape and reel SMAJ5.0A-M3/5A 0.064 5A 7500 13" diameter plastic tape and reel SMAJ5.0AHM3/H (1) 0.064 H 1800 7" diameter plastic tape and reel SMAJ5.0AHM3/I (1) 0.064 I 7500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (T = 25 °C unless otherwise noted) A 100 150 Non-Repetitive Pulse tr = 10 μs TJ = 25 °C )W WaveforTm S= h2o5w °nC in Fig. 3 MSR is DPeufinlseed W aisd tthhe ( tPd)oint k( rewo 10 A I % ,tne 100 PIPePMak Value WDehcearey sth teo P50ea %k Couf rIrPePnMt P esluP ka thruS MSMAJA8J5188 thrSuM SAMJA5.J078 rruC esluP HIPPaMlf Value - IP2P eP - PMPP 1 0.2" x 0.2" (5.0 mm x 5.0 mm) kaeP - MPP 50 1a0s/ 1D0e0fi0n eμds Wbya vRe.Efo.Arm. Copper Pad Areas I td 0.1 0 0.1 1 10 100 1000 10 000 0 1.0 2.0 3.0 4.0 td - Pulse Width (μs) t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 100 10 000 )P Measured at Stand-off T = 25 °C P J I( tnerruC% ,eg 75 nce (pF) Voltage VWM fV =sig 1 =.0 5 M0 HmzVp-p ro )P( rewoP esluP kPPatnecreP ni gnitareD 5205 C - Junction CapacitaJ1100000 Bi-Directional Uni-Directional a e P 0 10 0 25 50 75 100 125 150 175 200 1 10 100 200 TJ - Initial Temperature (°C) VWM - Reverse Stand-Off Voltage (V) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 4 - Typical Junction Capacitance Revision: 14-Jul-17 3 Document Number: 88390 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor 1000 200 )W T = T Max. /C A) 8.3 ms SinJgle HJalf Sine-Wave °( ecnad 100 Current ( 100 epmI lam d Surge 50 rehT 10 orwar tneisna Peak F rT 1 10 0.001 0.01 0.1 1.0 10 100 1000 1 10 100 t - Pulse Duration (s) Number of Cycles at 60 Hz p Fig. 5 - Typical Transient Thermal Impedance Fig. 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMA (DO-214AC) Cathode Band Mounting Pad Layout 0.066 (1.68) 0.074 (1.88) MIN. MAX. 0.065 (1.65) 0.110 (2.79) 0.049 (1.25) 0.100 (2.54) 0.177 (4.50) 0.157 (3.99) 0.060 (1.52) 0.012 (0.305) MIN. 0.006 (0.152) 0.208 (5.28) 0.090 (2.29) REF. 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Revision: 14-Jul-17 4 Document Number: 88390 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: SMAJ10/11 SMAJ10/5A SMAJ10/61 SMAJ10/63 SMAJ100/5A SMAJ100/61 SMAJ100/63 SMAJ100A/11 SMAJ100A/13 SMAJ100A/5A SMAJ100A/61 SMAJ100A/63 SMAJ100A-E3/13 SMAJ100A-E3/2G SMAJ100A-E3/51 SMAJ100A-E3/5A SMAJ100A-E3/61 SMAJ100A-E3/63 SMAJ100AHE3/2G SMAJ100AHE3/5A SMAJ100AHE3/61 SMAJ100AHE3/63 SMAJ100C/5A SMAJ100C/61 SMAJ100C/63 SMAJ100CA/11 SMAJ100CA/13 SMAJ100CA/5A SMAJ100CA/61 SMAJ100CA-E3/51 SMAJ100CA-E3/5A SMAJ100CA-E3/61 SMAJ100CA-E3/63 SMAJ100CAHE3/5A SMAJ100CAHE3/61 SMAJ100CAHE3/63 SMAJ100C-E3/5A SMAJ100C-E3/61 SMAJ100CHE3/5A SMAJ100CHE3/61 SMAJ100-E3/51 SMAJ100-E3/5A SMAJ100-E3/61 SMAJ100HE3/5A SMAJ100HE3/61 SMAJ10A/11 SMAJ10A/2F SMAJ10A/2G SMAJ10A/5A SMAJ10A/61 SMAJ10A/63 SMAJ10A- E3/2G SMAJ10A-E3/51 SMAJ10A-E3/5A SMAJ10A-E3/61 SMAJ10A-E3/63 SMAJ10AHE3/2G SMAJ10AHE3/5A SMAJ10AHE3/61 SMAJ10AHE3/63 SMAJ10C/5A SMAJ10C/61 SMAJ10C/63 SMAJ10CA/11 SMAJ10CA/13 SMAJ10CA/5A SMAJ10CA/61 SMAJ10CA/63 SMAJ10CA-E3/2G SMAJ10CA-E3/51 SMAJ10CA-E3/5A SMAJ10CA- E3/61 SMAJ10CA-E3/63 SMAJ10CAHE3/2G SMAJ10CAHE3/5A SMAJ10CAHE3/61 SMAJ10CAHE3/63 SMAJ10C- E3/2G SMAJ10C-E3/5A SMAJ10C-E3/61 SMAJ10CHE3/2G SMAJ10CHE3/5A SMAJ10CHE3/61 SMAJ10-E3/5A SMAJ10-E3/61 SMAJ10HE3/5A SMAJ10HE3/61 SMAJ110/5A SMAJ110/61 SMAJ110/63 SMAJ110A/5A SMAJ110A/61 SMAJ110A/63 SMAJ110A-E3/51 SMAJ110A-E3/5A SMAJ110A-E3/61 SMAJ110AHE3/5A SMAJ110AHE3/61 SMAJ110CA/11 SMAJ110CA/5A