8700 E. Thomas Road SM16LC03C Scottsdale, AZ 85251 Tel: (480) 941-6300 thru Fax: (480) 947-1503 SM16LC24C TVSarray(cid:212)(cid:212) Series DESCRIPTION (300 watt) This 16 pin 8 line Low Capacitance Bidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lighting. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a peak power of 300 watts for an 8/20 m sec pulse and are designed to protect 3.0/3.3 volt components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts. FEATURES MECHANICAL • Protects 3.0/3.3 up through 24V Components • Molded SO-16 Surface Mount • Protects 8 lines Bidirectional • Weight: 0.128 grams (approximate) • Provides electrically isolated protection • Body Marked with Logo, and device number • SO-16 Packaging • Pin #1 defined by DOT on top of package • Encapsulation meets UL 94V-0 MAXIMUM RATINGS PACKAGING • Operating Temperatures: -550C to +1500C • Tape & Reel EIA Standard 481-1-A • Storage Temperature: -550C to +1500C • 13 inch reel 2,500 pieces (OPTIONAL) • Peak Pulse Power: 300 Watts (8/20 m sec, Figure 1) • Carrier tubes 48 pcs per (STANDARD) • Pulse Repetition Rate: <.01% ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified LEAKAGE STAND BREAKDOWN CLAMPING CLAMPING CAPACITANCE TEMPERATURE CURREN OFF VOLTAGE VOLTAGE VOLTAGE (f=1 MHz) COEFFICIENT T NUPMARBTER MDAERVKICINEG VOLVTWAMGE @V1B mRA (F@IG 1UV ACRmE p2) (F@IG 5UV ACRmE p2) @ IVDWM @C0V OáFV VBRBR VOLTS VOLTS VOLTS VOLTS pF mV/°C µA MAX MIN MAX MAX MAX TYP MAX SM16LC03C MAA 3.3 4 7.0 9.0 200 25 -5 SM16LC05C MAB 5.0 6 9.8 11 20 25 1 SM16LC08C MAF 8.0 8.5 13.4 16.6 1 25 5 SM16LC12C MAC 12 13.3 19 24 1 25 8 SM16LC15C MAD 15 16.7 24 30 1 25 11 SM16LC24C MAE 24 26.7 43 55 1 25 28 Part numbers with a “C” suffix are bidirectional devices NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage V . Product selected voltage should be equal to or greater than the continuous peak operating voltage of WM the circuit to be protected. Application: The SM16CXXC product is designed for transient voltage suppression protection of components at the board level. It is an ideal product to be used for protection of I/O Transceivers. ISO 9001 CERTIFIED MSC0884.PDF REV M 7/07/2000

I p p % - - C u r r e n t P u l s e P e a k - - SM16LC03C thru SM16LC24C WAVE FORMS 100 Peak Value -- Ipp 8 X 20 Waveform 50 Half-Value -- Ipp 2 0 0 10 20 30 I t t d t -- Time in microsec p FIGURE 1 FIGURE 2 Peak Pulse Power Vs Pulse Time Pulse Wave Form p MOUNTING PAD SO-16 CIRCUIT DIAGRAM 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SO-16 PACKAGE A INCHES MILLIMETERS DIM MIN MAX MIN MAX A 0.358 0.398 9.09 10.10 B P B 0.150 0.158 3.81 4.01 C 0.053 0.069 1.35 1.75 D 0.011 0.021 0.28 0.53 F 0.016 0.050 0.41 1.27 G 0.050 BSC 1.27 BSC G D J 0.006 0.010 0.15 0.25 L K 0.004 0.008 0.10 0.20 L 0.189 0.206 4.80 5.23 C J P 0.228 0.244 5.79 6.19 K F ISO 9001 CERTIFIED MSC0884.PDF REV M 7/07/2000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M icrosemi: SM16LC12Ce3/TR13 SM16LC05C/TR13 SM16LC03C/TR13 SM16LC15Ce3/TR13 SM16LC24C/TR13 SM16LC24Ce3/TR13 SM16LC15C/TR13 SM16LC12C/TR13 SM16LC03Ce3/TR13 SM16LC05Ce3/TR13