I N D U C T O R S May 2013 Inductors for Power Circuits Wound Ferrite SLF series SLF6025 SLF6028 SLF6045 SLF7032 SLF7045 SLF7055 SLF10145 SLF10165 SLF12555 SLF12565 SLF12575

(1/48) I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 30°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (8) Public information-processing equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 001-01 / 20130516 / e531_slf.fm

(2/48) I N D U C T O R S Inductors for Power Circuits Product compatible with RoHS directive Compatible with lead-free solders Wound Ferrite Overview of the SLF Series FEATURES Magnetic shield type wound inductor for power circuits. Product lineup allows for various usages. APPLICATION Thin-screen TV, LCDs, AV equipment, gaming equipment, other electrical devices PART NUMBER CONSTRUCTION SLF 6025 T - 4R7 M 1R5 - PF L×W×H Dimensions Inductance Inductance Rated current Series name Packaging style Internal code (mm) (µH) tolerance (A) 6025 6.0×6.0×2.5 T Taping 1R0 1.0 M ±20% R47 0.47 6028 6.0×6.0×2.8 100 10 N ±30% 2R2 2.2 6045 6.0×6.0×4.5 101 100 150 15 7032 7.0×7.0×3.2 7045 7.0×7.0×4.5 7055 7.0×7.0×5.5 10145 10.1×10.1×4.5 10165 10.1×10.1×6.8 12555 12.5×12.5×5.5 12565 12.5×12.5×6.5 12575 12.5×12.5×7.5 OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Operating Storage Package quantity Individual weight Type temperature temperature （°C） （°C） (pieces/reel) （g） SLF6025 –40 to +105 –40 to +105 1000 0.3 SLF6028 –40 to +105 –40 to +105 1000 0.3 SLF6045 –40 to +105 –40 to +105 1000 0.4 SLF7032 –40 to +105 –40 to +105 1000 0.4 SLF7045 –40 to +105 –40 to +105 1000 0.6 SLF7055 –40 to +105 –40 to +105 1000 0.8 SLF10145 –40 to +105 –40 to +105 500 1.3 SLF10165 –40 to +105 –40 to +105 500 1.9 SLF12555 –40 to +105 –40 to +105 500 2.6 SLF12565 –40 to +105 –40 to +105 500 3.2 SLF12575 –40 to +105 –40 to +105 500 3.6 Operating temperature range includes self-temperature rise. The Storage temperature range is for after the circuit board is mounted. RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/ (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(3/48) I N D U C T O R S Overview of the SLF Series RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T4 e ur T3 T3 at er p m e T T2 T: t3 T1 t1 t2 t: Time Preheating Soldering Peak Temp. Time Temp. Time Temp. Time T1 T2 t1 T3 t2 T4 t3 150°C 180°C 60 to 120s 230°C 30s 250°C 5s (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(4/48) I N D U C T O R S SLF series SLF6025 Type SHAPE & DIMENSIONS 6±0.2 7 R 2 1 0. 0. ± ± 6 2 4 0.9 4 0.9 2 0. ± 5 2. Dimensions in mm RECOMMENDED LAND PATTERN 2 2. 1.5 4 1.5 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(5/48) I N D U C T O R S SLF SLF6025 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. ()±20% (µH) Tolerance (kHz) Idc1 Idc2 4.7 ±20% 100 0.0306 1.5 1.8 SLF6025T-4R7M1R5-PF 6.8 ±20% 100 0.0442 1.3 1.5 SLF6025T-6R8M1R3-PF 10 ±20% 100 0.0573 1 1.3 SLF6025T-100M1R0-PF 15 ±20% 100 0.085 0.88 1.1 SLF6025T-150MR88-PF 22 ±20% 100 0.122 0.73 0.94 SLF6025T-220MR73-PF 33 ±20% 100 0.18 0.59 0.79 SLF6025T-330MR59-PF 47 ±20% 100 0.24 0.48 0.67 SLF6025T-470MR48-PF 68 ±20% 100 0.37 0.42 0.54 SLF6025T-680MR42-PF 100 ±20% 100 0.5 0.33 0.47 SLF6025T-101MR33-PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (30% below the nominal value) Idc2: When based on the temperature increase (Temperature increase of 25°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(6/48) I N D U C T O R S SLF SLF6025 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 1000 101M 680M 470M 100 330M )H µ 220M (e nc 150M a ct 100M u d n 6R8M I 10 4R7M 1 1 10 100 1000 10000 100000 1000000 Frequency(kHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(7/48) I N D U C T O R S SLF SLF6025 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 1000 300 100 µ)H30 330M (ce 220M n ucta10 110500MM d 6R8M n I 4R7M 3 1 0.1 0.3 1 3 10 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(8/48) I N D U C T O R S SLF series SLF6028 Type SHAPE & DIMENSIONS 6±0.2 7 R 2 1 0. 0. ± ± 6 2 4 0.9 4 0.9 2 0. ± 8 2. Dimensions in mm RECOMMENDED LAND PATTERN 2 2. 1.5 4 1.5 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(9/48) I N D U C T O R S SLF SLF6028 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. ()±20% (µH) tolerance (kHz) Idc1 Idc2 4.7 ±20% 100 0.0284 1.6 2.5 SLF6028T-4R7M1R6-PF 6.8 ±20% 100 0.0354 1.5 2.2 SLF6028T-6R8M1R5-PF 10 ±20% 100 0.0532 1.3 1.8 SLF6028T-100M1R3-PF 15 ±20% 100 0.0745 1 1.4 SLF6028T-150M1R0-PF 22 ±20% 100 0.104 0.77 1.3 SLF6028T-220MR77-PF 33 ±20% 100 0.148 0.69 1.1 SLF6028T-330MR69-PF 47 ±20% 100 0.21 0.59 0.92 SLF6028T-470MR59-PF 68 ±20% 100 0.29 0.5 0.78 SLF6028T-680MR50-PF 100 ±20% 100 0.43 0.42 0.64 SLF6028T-101MR42-PF 150 ±20% 100 0.65 0.34 0.5 SLF6028T-151MR34-PF 220 ±20% 100 0.98 0.26 0.38 SLF6028T-221MR26-PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (30% below the nominal value) Idc2: When based on the temperature increase (Temperature increase of 25°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(10/48) I N D U C T O R S SLF SLF6028 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 1000 221M 151M 100 101M 680M )H µ 470M (e c n a 330M ct u d n I 220M 150M 10 100M 6R8M 4R7M 1 1 10 100 1000 10000 100000 1000000 Frequency(kHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(11/48) I N D U C T O R S SLF SLF6028 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 1000 221M 151M 100 101M 680M )H 470M µ ( e c an 330M ct u d n I 220M 150M 10 100M 6R8M 4R7M 1 0.0 0.5 1.0 1.5 2.0 2.5 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(12/48) I N D U C T O R S SLF series SLF6045 Type SHAPE & DIMENSIONS 6±0.2 7 R 2 1 0. 0. ± ± 6 2 4 0.9 4 0.9 3 0. ± 5 4. Dimensions in mm RECOMMENDED LAND PATTERN 2 2. 1.5 4 1.5 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(13/48) I N D U C T O R S SLF SLF6045 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. (m) (µH) Tolerance (kHz) Idc1 Idc2 1.5 ±30% 100 16±30% 4 4.1 SLF6045T-1R5N4R0-3PF 2.2 ±30% 100 18±30% 3.3 3.8 SLF6045T-2R2N3R3-3PF 3.3 ±30% 100 21.5±30% 2.8 3.4 SLF6045T-3R3N2R8-3PF 4.7 ±30% 100 26.5±30% 2.4 3.2 SLF6045T-4R7N2R4-3PF 6.8 ±30% 100 33±30% 2 2.8 SLF6045T-6R8N2R0-3PF 10 ±20% 100 39±20% 1.6 2.7 SLF6045T-100M1R6-3PF 15 ±20% 100 59.5±20% 1.3 2.'2 SLF6045T-150M1R3-3PF 22 ±20% 100 82±20% 1.1 1.8 SLF6045T-220M1R1-3PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial value) Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(14/48) I N D U C T O R S SLF SLF6045 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 1000 100 )H µ (e c n a 220M ct u 150M d n 100M I 10 6R8N 4R7N 3R3N 2R2N 1R5N 1 1 10 100 1000 10000 100000 1000000 10000000 Frequency(MHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(15/48) I N D U C T O R S SLF SLF6045 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 100 220M )H µ (e 150M c n10 a 100M ct u d 6R8N n I 4R7N 3R3N 2R2N 1R5N 1 0 2 4 6 8 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(16/48) I N D U C T O R S SLF series SLF7032 Type SHAPE & DIMENSIONS 7±0.2 7 R 2 1 0. 0. ± ± 7 2 4 0.9 4.9 0.9 2 0. ± 2 3. Dimensions in mm RECOMMENDED LAND PATTERN 2 2. 1.5 4.8 1.5 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(17/48) I N D U C T O R S SLF SLF7032 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L L measuring DC resistance Rated current(A) frequency Part No. (µH) Tolerance ()±20% max. (kHz) 3.3 ±20% 100 0.023 1.9 SLF7032T-3R3M1R9-2PF 4.7 ±20% 100 0.030 1.7 SLF7032T-4R7M1R7-2PF 6.8 ±20% 100 0.041 1.6 SLF7032T-6R8M1R6-2PF 10 ±20% 100 0.053 1.4 SLF7032T-100M1R4-2PF 15 ±20% 100 0.075 1.1 SLF7032T-150M1R1-2PF 22 ±20% 100 0.11 0.96 SLF7032T-220MR96-2PF 33 ±20% 100 0.16 0.75 SLF7032T-330MR75-2PF 47 ±20% 100 0.24 0.67 SLF7032T-470MR67-2PF 68 ±20% 100 0.31 0.59 SLF7032T-680MR59-2PF 100 ±20% 100 0.45 0.45 SLF7032T-101MR45-2PF 150 ±20% 100 0.65 0.37 SLF7032T-151MR37-2PF 220 ±20% 100 1.05 0.29 SLF7032T-221MR29-2PF 330 ±20% 100 1.67 0.22 SLF7032T-331MR22-2PF 470 ±20% 100 2.05 0.2 SLF7032T-471MR20-2PF 680 ±20% 100 3.15 0.16 SLF7032T-681MR16-2PF 1000 ±20% 100 4.78 0.13 SLF7032T-102MR13-2PF ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(18/48) I N D U C T O R S SLF SLF7032 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 100000 10000 1000 102M )H 681M µ (e 471M c n a 331M ct u d 221M n I 151M 100 101M 680M 470M 330M 220M 150M 10 100M 6R8M 4R7M 3R3M 1 1 10 100 1000 10000 Frequency(kHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(19/48) I N D U C T O R S SLF SLF7032 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 10000 1000 102M 681M 471M 331M 221M )H µ 151M (e c n 100 a 101M ct u d n 680M I 470M 330M 220M 150M 10 100M 6R8M 4R7M 3R3M 1 0 0.5 1 1.5 2 2.5 3 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(20/48) I N D U C T O R S SLF series SLF7045 Type SHAPE & DIMENSIONS 7±0.2 7 R 2 1 0. 0. ± ± 7 2 4 0.9 4.9 0.9 3 0. ± 5 4. Dimensions in mm RECOMMENDED LAND PATTERN 2 2. 1.5 4.8 1.5 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(21/48) I N D U C T O R S SLF SLF7045 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. ()±20% (µH) Tolerance (kHz) Idc1 Idc2 3.3 ±20% 100 0.02 2.5 2.3 SLF7045T-3R3M2R5-PF 4.7 ±20% 100 0.03 2 2.1 SLF7045T-4R7M2R0-PF 6.8 ±20% 100 0.039 1.7 1.74 SLF7045T-6R8M1R7-PF 10 ±20% 100 0.036 1.3 1.78 SLF7045T-100M1R3-PF 15 ±20% 100 0.052 1.1 1.53 SLF7045T-150M1R1-PF 22 ±20% 100 0.061 0.9 1.34 SLF7045T-220MR90-PF 33 ±20% 100 0.096 0.82 1.09 SLF7045T-330MR82-PF 47 ±20% 100 0.125 0.75 0.92 SLF7045T-470MR75-PF 68 ±20% 100 0.175 0.6 0.77 SLF7045T-680MR60-PF 100 ±20% 100 0.25 0.5 0.65 SLF7045T-101MR50-PF 150 ±20% 100 0.34 0.4 0.55 SLF7045T-151MR40-PF 220 ±20% 100 0.52 0.33 0.45 SLF7045T-221MR33-PF 330 ±20% 100 0.74 0.25 0.37 SLF7045T-331MR25-PF 470 ±20% 100 1.05 0.22 0.31 SLF7045T-471MR22-PF 680 ±20% 100 1.48 0.2 0.27 SLF7045T-681MR20-PF 1000 ±20% 100 2.28 0.14 0.25 SLF7045T-102MR14-PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial value) Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(22/48) I N D U C T O R S SLF SLF7045 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 10000 1000 102M 681M 471M 331M 221M )H µ 151M (e nc 100 a ct 101M u d n 680M I 470M 330M 220M 150M 10 100M 6R8M 4R7M 3R3M 1 1 10 100 1000 10000 100000 1000000 Frequency(kHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(23/48) I N D U C T O R S SLF SLF7045 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 10000 1000 102M 681M 471M 331M 221M )H µ 151M (e c n 100 a 101M ct u d n 680M I 470M 330M 220M 150M 10 100M 6R8M 4R7M 3R3M 1 0 1 2 3 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(24/48) I N D U C T O R S SLF series SLF7055 Type SHAPE & DIMENSIONS 7±0.2 7 R 2 1 0. 0. ± ± 7 2 4 0.9 4.9 0.9 3 0. ± 5 5. Dimensions in mm RECOMMENDED LAND PATTERN 2 2. 1.5 4.8 1.5 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(25/48) I N D U C T O R S SLF SLF7055 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. (m) (µH) Tolerance (kHz) Idc1 Idc2 1.5 ±30% 100 17.4±30% 6.2 4 SLF7055T-1R5N4R0-3PF 2.2 ±30% 100 21.7±30% 5.3 3.5 SLF7055T-2R2N3R5-3PF 3.3 ±30% 100 24±30% 4.3 3.3 SLF7055T-3R3N3R3-3PF 4.7 ±30% 100 28±30% 3.6 3.1 SLF7055T-4R7N3R1-3PF 6.8 ±30% 100 34±30% 3 2.8 SLF7055T-6R8N2R8-3PF 10 ±20% 100 39.1±20% 2.6 2.5 SLF7055T-100M2R5-3PF 15 ±20% 100 50.8±20% 2.1 2.2 SLF7055T-150M2R1-3PF 22 ±20% 100 64.3±20% 1.7 2 SLF7055T-220M1R7-3PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial value) Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(26/48) I N D U C T O R S SLF SLF7055 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 1000 100 )H µ (e c n a 220M ct u 150M d n I 10 100M 6R8M 4R7N 3R3N 2R2N 1R5N 1 1 10 100 1000 10000 100000 1000000 Frequency(MHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(27/48) I N D U C T O R S SLF SLF7055 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 100 )H 220M µ (e 150M c n10 a 100M ct u d 6R8M n I 4R7N 3R3N 2R2N 1R5N 1 0 1 2 3 4 5 6 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(28/48) I N D U C T O R S SLF series SLF10145 Type SHAPE & DIMENSIONS 10.1±0.3 100 0.3 1 0.1± 3±0. 1 2 6.1 2 3 0. ± 5 4. Dimensions in mm RECOMMENDED LAND PATTERN 2 3. 2.5 5.6 2.5 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(29/48) I N D U C T O R S SLF SLF10145 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. ()±20% (µH) Tolerance (kHz) Idc1 Idc2 3.3 ±30% 1 0.0161 4.9 3.7 SLF10145T-3R3N3R7-PF 5.6 ±20% 1 0.0220 3.8 3.2 SLF10145T-5R6M3R2-PF 10 ±20% 1 0.0364 3 2.5 SLF10145T-100M2R5-PF 15 ±20% 1 0.0472 2.4 2.2 SLF10145T-150M2R2-PF 22 ±20% 1 0.0591 2.1 1.9 SLF10145T-220M1R9-PF 33 ±20% 1 0.0815 1.6 1.7 SLF10145T-330M1R6-PF 47 ±20% 1 0.1 1.4 1.5 SLF10145T-470M1R4-PF 68 ±20% 1 0.14 1.2 1.3 SLF10145T-680M1R2-PF 100 ±20% 1 0.2 1 1.1 SLF10145T-101M1R0-PF 150 ±20% 1 0.35 0.79 0.81 SLF10145T-151MR79-PF 220 ±20% 1 0.47 0.65 0.7 SLF10145T-221MR65-PF 330 ±20% 1 0.68 0.54 0.58 SLF10145T-331MR54-PF 470 ±20% 1 1.03 0.47 0.47 SLF10145T-471MR47-PF 680 ±20% 1 1.6 0.38 0.38 SLF10145T-681MR38-PF 1000 ±20% 1 2.8 0.32 0.29 SLF10145T-102MR29-PF 1500 ±20% 1 3.4 0.22 0.26 SLF10145T-152MR22-PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial value) Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(30/48) I N D U C T O R S SLF SLF10145 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 100000 10000 152M 1000 102M )H 681M µ (e 471M c n a 331M ct u d 221M n I 151M 100 101M 680M 470M 330M 220M 150M 10 100M 5R6M 3R3N 1 1 10 100 1000 10000 100000 Frequency(kHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(31/48) I N D U C T O R S SLF SLF10145 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 10000 152M 1000 102M 681M 471M 331M 221M )H µ (e 151M c n 100 cta 101M u d n 680M I 470M 330M 220M 150M 10 100M 5R6M 3R3N 1 0 1 2 3 4 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(32/48) I N D U C T O R S SLF series SLF10165 Type SHAPE & DIMENSIONS 10.1±0.3 100 0.3 1 0.1± 3±0. 1 2 6.1 2 3 0. ± 5 6. Dimensions in mm RECOMMENDED LAND PATTERN 2 3. 2.5 5.6 2.5 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(33/48) I N D U C T O R S SLF SLF10165 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. (m) (µH) Tolerance (kHz) Idc1 Idc2 1.5 ±30% 100 6.7±30% 10.7 6.8 SLF10165T-1R5N6R83PF 2.2 ±30% 100 8.4±30% 8.9 6.3 SLF10165T-2R2N6R33PF 3.3 ±30% 100 9.6±30% 7.8 5.8 SLF10165T-3R3N5R83PF 4.7 ±30% 100 11.7±30% 6.1 4.7 SLF10165T-4R7N4R73PF 6.8 ±30% 100 14±30% 4.6 4.3 SLF10165T-6R8N4R33PF 10 ±20% 100 18.5±20% 4.1 3.8 SLF10165T-100M3R83PF 15 ±20% 100 27±20% 3.1 3.1 SLF10165T-150M3R13PF 22 ±20% 100 44.8±20% 2.7 2.4 SLF10165T-220M2R43PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial value) Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(34/48) I N D U C T O R S SLF SLF10165 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 1000 100 )H 220M 150M µ (e 100M c n a 6R8M ct u d 4R7N n I 10 3R3N 2R2N 1R5N 0 1 10 100 1000 10000 100000 Frequency(MHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(35/48) I N D U C T O R S SLF SLF10165 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 1000 100 )H µ (e c n a ct u 220M d n 150M I 10 100M 6R8N 4R7N 3R3N 2R2N 1R5N 1 0 5 10 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(36/48) I N D U C T O R S SLF series SLF12555 Type SHAPE & DIMENSIONS 12.5±0.3 100 0.3 1 2.5± 3±0. 1 2 8.5 2 3 0. ± 5 5. Dimensions in mm RECOMMENDED LAND PATTERN 2 3. 2.6 8.5 2.6 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(37/48) I N D U C T O R S SLF SLF12555 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. ()±20% (µH) Tolerance (kHz) Idc1 Idc2 6 ±30% 1 0.0164 3.6 4.9 SLF12555T-6R0N3R6-PF 10 ±20% 1 0.0215 3.4 4.3 SLF12555T-100M3R4-PF 15 ±20% 1 0.0259 2.8 3.9 SLF12555T-150M2R8-PF 22 ±20% 1 0.0338 2.3 3.4 SLF12555T-220M2R3-PF 33 ±20% 1 0.0415 1.9 3.1 SLF12555T-330M1R9-PF 47 ±20% 1 0.0618 1.6 2.5 SLF12555T-470M1R6-PF 68 ±20% 1 0.0832 1.3 2.2 SLF12555T-680M1R3-PF 100 ±20% 1 0.117 1.1 1.8 SLF12555T-101M1R1-PF 150 ±20% 1 0.19 0.88 1.4 SLF12555T-151MR88-PF 220 ±20% 1 0.27 0.72 1.2 SLF12555T-221MR72-PF 330 ±20% 1 0.41 0.59 1 SLF12555T-331MR59-PF 470 ±20% 1 0.52 0.49 0.88 SLF12555T-471MR49-PF 680 ±20% 1 0.76 0.43 0.73 SLF12555T-681MR43-PF 1000 ±20% 1 1.12 0.34 0.6 SLF12555T-102MR34-PF 1500 ±20% 1 1.73 0.29 0.48 SLF12555T-152MR29-PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial value) Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(38/48) I N D U C T O R S SLF SLF12555 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 100000 10000 152M 1000 102M )H 681M µ (ce 471M n cta 331M u d 221M n I 151M 100 101M 680M 470M 330M 220M 150M 10 100M 6R0N 1 1 10 100 1000 10000 100000 Frequency(kHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(39/48) I N D U C T O R S SLF SLF12555 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 10000 152M 1000 102M 681M 471M 331M 221M )H µ (e 151M c n 100 cta 101M u d In 680M 470M 330M 220M 150M 10 100M 6R0N 1 0 1 2 3 4 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(40/48) I N D U C T O R S SLF series SLF12565 Type SHAPE & DIMENSIONS 12.5±0.3 100 0.3 1 2.5± 3±0. 1 2 8.5 2 5 3 0. ± 5 6. Dimensions in mm RECOMMENDED LAND PATTERN 2 3. 2.6 8.5 2.6 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(41/48) I N D U C T O R S SLF SLF12565 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. ()±20% (µH) Tolerance (kHz) Idc1 Idc2 2 ±30% 1 0.0117 10 6.2 SLF12565T-2R0N6R2-PF 4.2 ±30% 1 0.015 7.3 5.5 SLF12565T-4R2N5R5-PF 7 ±30% 1 0.0177 5.7 5 SLF12565T-7R0N5R0-PF 10 ±20% 1 0.0202 5 4.8 SLF12565T-100M4R8-PF 15 ±20% 1 0.0237 4.2 4.4 SLF12565T-150M4R2-PF 22 ±20% 1 0.0316 3.5 3.8 SLF12565T-220M3R5-PF 33 ±20% 1 0.0406 2.8 3.4 SLF12565T-330M2R8-PF 47 ±20% 1 0.0578 2.4 2.8 SLF12565T-470M2R4-PF 68 ±20% 1 0.0787 2 2.4 SLF12565T-680M2R0-PF 100 ±20% 1 0.123 1.6 1.9 SLF12565T-101M1R6-PF 220 ±20% 1 0.273 1 1.2 SLF12565T-221M1R0-PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial value) Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(42/48) I N D U C T O R S SLF SLF12565 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 10000 1000 )H 221M µ (e nc 100 a ct 101M u d n 680M I 470M 330M 220M 150M 10 100N 7R0N 4R2N 2R0N 1 1 10 100 1000 10000 100000 Frequency(kHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(43/48) I N D U C T O R S SLF SLF12565 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 1000 221M 100 101M 680M )H µ 470M (e c n cta 330M u d n I 220M 150M 10 100N 7R0N 4R2N 2R0N 1 0 2 4 6 8 10 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(44/48) I N D U C T O R S SLF series SLF12575 Type SHAPE & DIMENSIONS 12.5±0.3 100 0.3 1 2.5± 3±0. 1 2 8.5 2 5 3 0. ± 5 7. Dimensions in mm RECOMMENDED LAND PATTERN 2 3. 2.6 8.5 2.6 Dimensions in mm (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(45/48) I N D U C T O R S SLF SLF12575 Type series　 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L measuring Rated current(A) L DC resistance frequency max. Part No. ()±20% (µH) Tolerance (kHz) Idc1 Idc2 1.2 ±30% 1 0.0069 13 8.2 SLF12575T-1R2N8R2-PF 2.7 ±30% 1 0.0094 10 7 SLF12575T-2R7N7R0-PF 3.9 ±30% 1 0.0104 9 6.7 SLF12575T-3R9N6R7-PF 5.6 ±30% 1 0.0116 7.8 6.3 SLF12575T-5R6N6R3-PF 6.8 ±30% 1 0.0131 7.2 5.9 SLF12575T-6R8N5R9-PF 10 ±20% 1 0.0156 5.5 5.4 SLF12575T-100M5R4-PF 15 ±20% 1 0.0184 4.7 5 SLF12575T-150M4R7-PF 22 ±20% 1 0.0263 4 4 SLF12575T-220M4R0-PF 33 ±20% 1 0.0395 3.2 3.4 SLF12575T-330M3R2-PF 47 ±20% 1 0.0528 2.7 3 SLF12575T-470M2R7-PF 68 ±20% 1 0.0778 2 2.4 SLF12575T-680M2R0-PF 100 ±20% 1 0.125 1.9 1.9 SLF12575T-101M1R9-PF 150 ±20% 1 0.175 1.5 1.6 SLF12575T-151M1R5-PF 220 ±20% 1 0.258 1.3 1.3 SLF12575T-221M1R3-PF Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial value) Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating) ○Measurement equipment Measurement item Product No. Manufacturer L 4194A Agilent Technologies DC resistance VP-2941A Panasonic Rated current Idc1 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(46/48) I N D U C T O R S SLF SLF12575 Type series　 ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 10000 1000 221M )H 151M µ (e nc 100 101M a ct u 680M d n I 470M 330M 220M 150M 100M 10 6R8N 5R6N 3R9N 2R7N 1R2N 1 1 10 100 1000 10000 100000 Frequency(kHz) ○Measurement equipment Product No. Manufacturer 4294A Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(47/48) I N D U C T O R S SLF SLF12575 Type series　 ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 1000 221M 151M 100 101M 680M )H µ 470M (e c n a 330M ct u d n I 220M 150M 10 100M 6R8N 5R6N 3R9N 2R7N 1R2N 1 0 2 4 6 8 10 12 DC current(A) ○Measurement equipment Product No. Manufacturer 4284A+42841A+42842C Agilent Technologies ＊ Equivalent measurement equipment may be used. (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

(48/48) I N D U C T O R S SLF series Packaging Style REEL DIMENSIONS 2.0±0.5 B Type A B C D E SLF6025 ø330 22.4 ø50 16.4 2 SLF6028 ø330 22.4 ø50 16.4 2 SLF6045 ø330 22.4 ø50 16.4 2 SLF7032 ø330 22.4 ø50 16.4 2 SLF7045 ø330 22.4 ø50 16.4 2 SLF7055 ø330 22.4 ø50 16.4 2 C SLF10145 ø330 30.4 ø50 24.4 2 SLF10165 ø330 30.4 ø50 24.4 2 SLF12555 ø330 30.4 ø50 24.4 2 (1.0) SLF12565 ø330 30.4 ø50 24.4 2 SLF12575 ø330 30.4 ø50 24.4 2 * These values are typical values. ø13.0±0.5 D E ø21.0±0.8 A Dimensions in mm TAPE DIMENSIONS øD0 P2 P0 P1 E K F W 0 B A0 t Dimensions in mm Type A0 B0 øD0 E F P0 P1 P2 W K t SLF6025 6.4 6.4 1.5+0.1/-0 1.75±0.1 7.5±0.1 4.0±0.1 12.0±0.1 2.0±0.05 16.0±0.3 3.1 0.4 SLF6028 6.4 6.4 1.5+0.1/-0 1.75±0.1 7.5±0.1 4.0±0.1 12.0±0.1 2.0±0.05 16.0±0.3 3.1 0.4 SLF6045 6.4 6.4 1.5+0.1/-0 1.75±0.1 7.5±0.1 4.0±0.1 12.0±0.1 2.0±0.05 16.0±0.3 4.9 0.4 SLF7032 7.4 7.6 1.5+0.1/-0 1.75±0.1 7.5±0.1 4.0±0.1 12.0±0.1 2.0±0.05 16.0±0.3 3.6 0.4 SLF7045 7.4 7.6 1.5+0.1/-0 1.75±0.1 7.5±0.1 4.0±0.1 12.0±0.1 2.0±0.05 16.0±0.3 4.8 0.4 SLF7055 7.4 7.6 1.5+0.1/-0 1.75±0.1 7.5±0.1 4.0±0.1 12.0±0.1 2.0±0.05 16.0±0.3 5.5 0.4 SLF10145 10.5 10.5 1.5+0.1/-0 1.75±0.1 11.5±0.1 4.0±0.1 16.0±0.1 2.0±0.05 24.0±0.3 5.0 0.4 SLF10165 10.5 10.5 1.5+0.1/-0 1.75±0.1 11.5±0.1 4.0±0.1 16.0±0.1 2.0±0.05 24.0±0.3 7.1 0.4 SLF12555 13 13 1.5+0.1/-0 1.75±0.1 11.5±0.1 4.0±0.1 16.0±0.1 2.0±0.05 24.0±0.3 6.0 0.4 SLF12565 13 13 1.5+0.1/-0 1.75±0.1 11.5±0.1 4.0±0.1 16.0±0.1 2.0±0.05 24.0±0.3 7.0 0.34 SLF12575 13 13 1.5+0.1/-0 1.75±0.1 11.5±0.1 4.0±0.1 16.0±0.1 2.0±0.05 24.0±0.3 8.0 0.34 (cid:129) All specifications are subject to change without notice. 001-01 / 20130516 / e531_slf.fm

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T DK: SLF10145T-151MR79 SLF10145T-220M1R9 SLF10145T-470M1R4 SLF10145T-680M1R2 SLF7032T-3R3M1R9-2 SLF7032T-470MR67-2 SLF7032T-4R7M1R7-2 SLF7045T-221MR33 SLF7045T-680MR60 SLF10145T-100M2R5 SLF10145T-101M1R0 SLF12575T-331M1R0-H SLF12575T-680M2R0-H SLF7032T-100M1R4-2PF SLF7032T- 101MR45-2PF SLF7032T-102MR13-2PF SLF7032T-150M1R1-2PF SLF7032T-151MR37-2PF SLF7032T-220MR96- 2PF SLF7032T-221MR29-2PF SLF7032T-330MR75-2PF SLF7032T-331MR22-2PF SLF7032T-3R3M1R9-2PF SLF7032T-470MR67-2PF SLF7032T-471MR20-2PF SLF7032T-4R7M1R7-2PF SLF7032T-680MR59-2PF SLF7032T- 681MR16-2PF SLF7032T-6R8M1R6-2PF SLF12575T-3R9N6R7-PF SLF12555T-331MR59-PF SLF12555T- 330M1R9-PF SLF12555T-471MR49-PF SLF10145T-102MR29-PF SLF7045T-3R3M2R5-PF SLF7028T-470MR54-PF SLF7030T-3R3M1R8-PF SLF7032T-3R3M1R9-2-PF SLF7028T-150MR88-PF SLF7045T-330MR82-PF SLF7032T- 331MR22-2-PF SLF7030T-330MR65-PF SLF7032T-330MR75-2-PF SLF6028T-6R8M1R5-PF SLF10145T-221MR65- PF SLF12575T-6R8N5R9-PF SLF12555T-6R0N3R6-PF SLF12565T-101M1R6-PF SLF12555T-101M1R1-PF SLF12575T-101M1R9-PF SLF7028T-100M1R1-PF SLF7028T-330MR65-PF SLF6025T-680MR42-PF SLF12565T- 221M1R0-PF SLF12575T-221M1R3-PF SLF12575T-2R7N7R0-PF SLF12555T-220M2R3-PF SLF12565T-220M3R5- PF SLF12575T-220M4R0-PF SLF7045T-471MR22-PF SLF7045T-470MR75-PF SLF7032T-470MR67-2-PF SLF7030T-470MR57-PF SLF7032T-471MR20-2-PF SLF12575T-1R2N8R2-PF SLF7045T-6R8M1R7-PF SLF6025T- 220MR73-PF SLF7030T-6R8M1R5-PF SLF7032T-6R8M1R6-2-PF SLF7028T-220MR75-PF SLF7045T-151MR40-PF SLF12565T-150M4R2-PF SLF7032T-681MR16-2-PF SLF12575T-150M4R7-PF SLF12555T-152MR29-PF SLF7045T-681MR20-PF SLF12555T-150M2R8-PF SLF12565T-4R2N5R5-PF SLF7028T-4R7M1R5-PF SLF12555T- 470M1R6-PF SLF12575T-470M2R7-PF SLF12565T-470M2R4-PF SLF10145T-100M2R5-PF SLF10145T-101M1R0- PF SLF12575T-680M2R0-PF SLF12555T-681MR43-PF SLF12565T-680M2R0-PF SLF12555T-680M1R3-PF SLF12555T-100M3R4-PF SLF12575T-100M5R4-PF SLF12565T-100M4R8-PF SLF12555T-102MR34-PF SLF7045T- 220MR90-PF SLF7030T-220MR86-PF SLF7032T-221MR29-2-PF SLF6025T-100M1R0-PF SLF6028T-330MR69-PF SLF10145T-680M1R2-PF SLF10145T-681MR38-PF SLF6025T-6R8M1R3-PF