DATA SHEET SKY65404-31: 5 GHz Low-Noise Amplifier Applications V_ENABLE VCC  802.11a/n/ac radios  5 GHz ISM radios Bias  Smartphones  Notebooks, netbooks, and tablets 5 GHz RF_IN RF_OUT LNA  Access points, routers, and gateways  Wireless video systems Y2567 Features Figure 1. SKY65404-31 LNA Block Diagram  Ultra-low noise figure: 1.0 dB Description  4.9 GHz to 5.9 GHz operation The SKY65404-31 is an ultra low-noise amplifier (LNA) intended  Enable/disable mode for 5 GHz wireless receiver applications. Its industry-leading noise  High IIP3: +7 dBm figure (NF), together with high linearity, makes it ideal as a first- stage LNA in 802.11a wireless local area network (WLAN) radios.  High gain: 13 dB Operating with a single supply voltage, the SKY65404-31  2.8 to 5.0 V single-supply operation consumes only 10 mA of current. The device includes a shutdown  QFN (6-pin, 1.5 x 1.5 mm) package mode to save power when the receiver is inactive. (MSL1, 260 C per JEDEC J-STD-020) The tiny package footprint of the SKY65404-31, requiring only four external components, enables the industry’s smallest PCB area needed to implement a 5 GHz LNA. Skyworks GreenTM products are compliant with A block diagram of the SKY65404-31 is shown in Figure 1. The all applicable legislation and are halogen-free. device package and pinout for the 6-pin Quad Flat No-Lead (QFN) For additional information, refer to Skyworks are shown in Figure 2. Signal pin assignments and functional pin Definition of GreenTM, document number descriptions are described in Table 1. SQ04–0074. V_ENABLE 1 6 VCC GND 2 5 GND RF_IN 3 4 RF_OUT S1351 Figure 2. SKY65404-31 Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201512K • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • November 6, 2015 1

DATA SHEET • SKY65404-31: 5 GHz LNA Table 1. SKY65404-31 Pin Assignments and Signal Descriptions Pin Name Description 1 V_ENABLE Enable control input 2 GND Ground 3 RF_IN LNA input 4 RF_OUT LNA output 5 GND Ground 6 VCC Supply voltage for LNA Technical Description Electrical and Mechanical Specifications The SKY65404-31 is matched at the RF output port (pin 4) and The absolute maximum ratings of the SKY65404-31 are provided requires only a shunt capacitor match at the RF input port (pin 3). in Table 2. The recommended operating conditions are specified The VCC signal (pin 6) requires a simple bypass circuit. An in Table 3 and electrical specifications are provided in Table 4. external resistor on the V_ENABLE signal (pin 1) allows a wide Table 5 provides the control logic for the SKY65404-31. range of control voltages to be used. Shutdown mode is achieved Performance characteristics for the SKY65404-31 are illustrated by switching the V_ENABLE signal to 0 V. in Figures 3 through 9. Table 2. Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units Supply voltage VCC 0 5.5 V DC voltage at control ports VENABLE –0.3 5.0 V RF input power: RFIN LNA enabled +1 dBm LNA disabled +10 dBm Operating temperature TA –40 +85 C Storage temperature TSTG –40 +125 C Electrostatic discharge: Charged Device Model (CDM), Class 3 500 V Human Body Model (HBM), Class 0 150 V Machine Model (MM), Class A 50 V Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal values. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 November 6, 2015 • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • 201512K

DATA SHEET • SKY65404-31: 5 GHz LNA Table 3. Recommended Operating Conditions (@ +25 °C, VCC = 3 V) Parameter Symbol Minimum Typical Maximum Units Supply voltage VCC 2.8 3.0 5.0 V RF frequency range f 4900 5900 MHz Operating temperature range TA –40 +25 +85 C DC voltage at control port: High VENABLE_H 2.5 3.0 3.5 V Low VENABLE_L 0 0 0.2 V Table 4. Electrical Characteristics (4900-5900 MHz) (Note 1) (VCC = 3 V, TA = +25 C, V_ENABLE = 3 V, Unless Otherwise Noted) Parameter Symbol Test Conditions Minimum Typical Maximum Units Enable Mode Gain S21 11 13 16 dB Noise figure NF 0.8 1.0 1.5 dB Third order input intercept point IIP3 +5 +7 +9 dBm In-band 1 dB compression point at input IP1dB –5 –4 –2 dBm Out-of-band (2.45 GHz injected signal) 1 dB IP1dB –7 –3 –2 dBm compression point at input Input/output return loss S11, S22 ZS/L = 50  –10 –6 dB Reverse isolation S12 –26 –20 dB Drain current V_ENABLE = 3 V 10 11 15 mA V_ENABLE = 0 V 0 <1 5 μA V_ENABLE current IEN_HIGH V_ENABLE = 3 V 2.3 3.0 mA Rise time tRISE 125 155 ns Fall time tFALL 60 90 ns Disable Mode Gain S21 –25 –15 dB Input return loss S11 –2 –1 0 dB Output return loss S22 –15 –12 –8 dB V_ENABLE current IEN_LOW V_ENABLE = 0 V to 0.2 V 1.7 1.9 μA Note 1: Performance is guaranteed only under the conditions listed in this table. Table 5. Mode Control Logic V_ENABLE Voltage (V) Description 3 LNA is enabled 0 LNA is disabled Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201512K • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • November 6, 2015 3

DATA SHEET • SKY65404-31: 5 GHz LNA Typical Performance Characteristics (VCC = 3 V, TA = +25 C, V_ENABLE = 3 V, Unless Otherwise Noted) +20 1.4 +15 +10 1.2 B) |S|, |S|, |S| (d112122 –––+–121555000 |S11| Noise Figure (dB) 0001....4680 |S21| –25 |S22| 0.2 –30 4.90 5.25 5.40 5.85 4.8 5.0 5.2 5.4 5.6 5.8 6.0 Frequency (GHz) Frequency (GHz) Figure 3. S-Parameter Data Figure 4. Noise Figure vs Frequency +12 0 –1 +10 –2 –3 +8 m) Bm) –4 IIP3 (dB+6 P1dB (d ––56 +4 –7 –8 +2 –9 –10 0 –60 –40 –20 0 +20 +40 +60 +80 +100 4.8 5.0 5.2 5.4 5.6 5.8 6.0 Frequency (GHz) Temperature (oC) Figure 6. P1dB vs Temperature Figure 5. IIP3 vs Frequency 20 2.5 18 16 2.0 14 B) Gain (dB) 110862 Noise Figure (d 11..50 4 0.5 2 0 0 –60 –40 –20 0 +20 +40 +60 +80 +100 –60 –40 –20 0 +20 +40 +60 +80 +100 Temperature (oC) Temperature (oC) Figure 7. Gain vs Temperature Figure 8. Noise Figure vs Temperature Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 November 6, 2015 • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • 201512K

DATA SHEET • SKY65404-31: 5 GHz LNA +10 +9 +8 +7 m) +6 B d +5 3 ( P +4 II +3 +2 +1 0 –60 –40 –20 0 +20 +40 +60 +80 +100 Temperature (oC) Figure 9. IIP3 vs Temperature Package Dimensions Package and Handling Information An application schematic diagram for the SKY65404-31 is Instructions on the shipping container label regarding exposure shown in Figure 10. The PCB footprint drawing for the to moisture after the container seal is broken must be followed. SKY65404-31 is provided in Figure 11. Typical part markings Otherwise, problems related to moisture absorption may occur are shown in Figure 12. The package dimensions are shown in when the part is subjected to high temperature during solder Figure 13, and the tape and reel dimensions are provided in assembly. Figure 14. The SKY65404-31 is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. R1 L1 100 Ω 1 6 0.6 nH Control Input V_ENABLE VCC VCC C2 0.1 μF 2 5 GND GND 3 4 RF Input RF_IN RF_OUT RF Output C3 0.5 pF S1353 Figure 10. SKY65404-31 Schematic Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201512K • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • November 6, 2015 5

DATA SHEET • SKY65404-31: 5 GHz LNA 6X 0.55 0.15 X 45o 6X 0.35 6X 0.25 0.60 0.50 Pitch 1.20 0.05 7X Exposed Solder 0.20 Area 0.35 0.70 S1535 Figure 11. SKY65404-31 PCB Layout Footprint (Top View) Pin 1 Indicator Skyworks Part # Figure 12. Typical Part Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 November 6, 2015 • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • 201512K

DATA SHEET • SKY65404-31: 5 GHz LNA C Seating Plane 0P.in1 51 XIn 4d5. o 1.5 A 0.70 +0.10/–0.15 B 0.02 +0.03/–0.02 2X 0.05 Pin 1 Indicator 1.5 1.20 +0.10/–0.15 Detail B 2X 0.10 C 6X 3 Detail C 0.08 C Exposed Pad 2X 0.10 C 0.41/0.50 0.10 C Top View Side View Bottom View 6X 0.20 Min 0.175 ± 0.10 0.5 0.25 +0.05/–0.07 5 CL 0.10 C A B 2X R0.05 Detail C Detail B 6 Places All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the exposed heat sink slug as well as the terminals.. Plating requirement per source control drawing (SCD) 2504. Dimension applies to metalized terminal and is measured between 0.15 mm and 0.30 mm from terminal tip. S1350 Figure 13. SKY65404-31 Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201512K • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • November 6, 2015 7

DATA SHEET • SKY65404-31: 5 GHz LNA Pin 1 4.00 ± 0.10 ϕ1.50± 0.10 2.00 ± 0.05 0.20 ± 0.02 (T) 1.75 ± 0.10 5o Max ± 0.05 (Bo) A B A 3.50 ± 0.05 8.00 +0.30/–0.10 1.78 B 0.69 ± 0.05 (Ko) ϕ0.50± 0.05 B 5o Max 1.78 ± 0.05 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. All measurements are in millimeters. S1382a Figure 14. SKY65404-31 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 November 6, 2015 • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • 201512K

DATA SHEET • SKY65404-31: 5 GHz LNA Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SKY65404-31 LNA SKY65404-31 EN31-D985-001 Copyright © 2011-2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201512K • Skyworks Proprietary Information • Products and Product Information Are Subject To Change Without Notice • November 6, 2015 9