DATA SHEET SKY13350-385LF: 0.01 to 6.0 GHz GaAs SPDT Switch Applications INPUT  WLAN 802.11 a/b/g networks  WLAN repeaters  ISM band radios OUTPUT1 OUTPUT2  Low power transmit receive systems Features  Positive voltage control (0/1.6 V to 0/5.0 V) 201174-001  Broadband frequency range: 0.01 to 6.0 GHz VCTL1 VCTL2  Very low insertion loss: 0.35 dB typical @ 3 GHz Figure 1. SKY13350-385LF Block Diagram  High isolation, 25 dB typical @ 3 GHz  Excellent linearity performance, IP0.5dB = +30 dBm with Description control voltage = 3 V The SKY13350-385LF is a GaAs pHEMT FET single-pole, double-  Ultra-miniature, MLPD (6-pin, 1 x 1 mm) package throw (SPDT) switch. The switch can be used in transmit/receive (MSL1, 260 C per JEDEC J-STD-020) applications by connecting the RF common port (INPUT, pin 6) to either the OUTPUT1 or OUTPUT2 port (pin 2 or 4, respectively) Skyworks GreenTM products are compliant with using a low loss path (i.e., a positive voltage applied to either all applicable legislation and are halogen-free. VCTL1 or VCTL2 pins). The switch is “reflective short” on the For additional information, refer to Skyworks isolated port. Definition of GreenTM, document number The switch is manufactured in a compact, 1 x 1 mm, 6-pin SQ04–0074. exposed pad plastic Micro Leadframe Package Dual (MLPD) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. T U P N I 6 VCTL1 1 5 VCTL2 OUTPUT1 2 4 OUTPUT2 3 D N G Figure 2. SKY13350-385LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201174H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 8, 2017 1

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH Table 1. SKY13350-385LF Signal Descriptions Pin Name Description Pin Name Description 1 VCTL1 DC control voltage 4 OUTPUT2 RF port. Must be DC blocked. 2 OUTPUT1 RF port. Must be DC blocked. 5 VCTL2 DC control voltage 3 GND Ground 6 INPUT RF port. Must be DC blocked Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13350-385LF are Typical performance characteristics of the SKY13350-385LF are provided in Table 2. The recommended operating conditions are illustrated in Figures 3 through 9. specified in Table 3 and electrical specifications are provided in The state of the SKY13350-385LF is determined by the logic Table 4. provided in Table 5. Table 2. SKY13350-385LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Input power PIN >500 MHz, 5 V +32 dBm >500 MHz, 3 V +31 dBm Storage temperature TSTG –65 +150 C Operating temperature TOP –40 +105 C ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SKY13350-385LF Recommended Operating Conditions Parameter Symbol Min Typ Max Units Frequency f 0.01 6.0 GHz Control voltage: low VCTL_L 0 0.2 V high VCTL_H 1.6 5.0 V Operating temperature TOP +25 C Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 September 8, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201174H

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH Table 4. SKY13350-385LF Electrical Specifications1 (VCTL = 0 V and +2.7 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typ Max Units Insertion loss 0.01 to 3.0 GHz 0.35 0.50 dB 3.0 to 6.0 GHz 0.60 0.80 dB Isolation 0.01 to 3.0 GHz 18 20 dB 3.0 to 6.0 GHz 17 18 dB Return loss (insertion loss state) 0.01 to 3.0 GHz 21 dB 3.0 to 6.0 GHz 18 dB Switching characteristics: Rise/fall time 10/90% or 90/10% RF 45 ns On/off time 50% VCTL to 90/10% RF 45 ns Video feedthrough 25 mV 0.5 dB input compression point IP0.5dB f = 2.45 GHz: VCTL = 1.8 V +25 dBm VCTL = 2.7 V +30 dBm f = 5.8 GHz: VCTL = 1.8 V +25 dBm VCTL = 2.7 V +30 dBm Input IP3 IIP3 PIN = +10 dBm/tone, tone spacing = 1 MHz f = 2.45 GHz: VCTL = 1.8 V +32 dBm VCTL = 2.7 V +50 dBm f = 5.8 GHz: VCTL = 1.8 V +30 dBm VCTL = 2.7 V +46 dBm Error vector magnitude EVM 802.11a, 54 Mbps, PIN = <+24 dBm, VCTL = 3.0 V 2.5 % 802.11g, 54 Mbps, PIN = <+25.5 dBm, VCTL = 3.0 V 2.5 % Control voltage: Low VCTL_L 0 0.2 V High VCTL_H 1.6 2.7 5.0 V Supply current ICC VCTL_L = 0 V 5 μA VCTL_H = 5 V 5 μA 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201174H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 8, 2017 3

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH Typical Performance Characteristics (VCTL = 0 V and +2.7 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [Zo] = 50 Ω, Blocking Capacitors = 100 pF, Bypass Capacitors = 33 pF, Unless Otherwise Noted) 0 0 Input-Output 1 –0.2 –5 Input-Output 2 Output 1 to Output 2 –0.4 –10 B) –0.6 oss (d –0.8 n (dB)–15 sertion L ––11..02 Isolatio––2205 n –1.4 I –1.6 IInnppuutt--OOuuttppuutt 12 –30 –1.8 –35 –2.0 –40 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency (GHz) Frequency (GHz) Figure 3. Typical Insertion Loss Figure 4. Typical Isolation 0 –5 S11 (Input-Output 1) S11 (Input-Output 2) B) +0.1 –10 n (d 0 B) sio –0.1 urn Loss (d –––122505 er Transmis ––––0000....2345 Ret –30 d Pow ––00..67 123...870 VVV 345...300 VVV e –35 aliz –0.8 m –0.9 –400 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Nor –1.0+10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 +34 Frequency (GHz) Input Power (dBm) Figure 6. Compression vs Control Voltage Figure 5. Typical Return Loss (2450 MHz) on (dB) +–00..101 34..50 123...870 VVV missi –0.2 3.0 345...300 VVV er Trans –––000...345 M (%)22..50 w V Po –0.6 E1.5 alized ––00..78 123...870 VVV 345...300 VVV 1.0 orm –0.9 0.5 N –1.0 0 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 +34 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 Input Power (dBm) Output Power (dBm) Figure 7. Compression vs Control Voltage Figure 8. 802.11a EVM vs Output Power, 5.2-5.8 GHz, 54 Mbps (5.2 to 5.8 GHz) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 September 8, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201174H

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH 4.0 1.8 V 3.5 2.7 V 3.0 V 3.0 34..30 VV 5.0 V 2.5 %) M (2.0 V E1.5 1.0 0.5 0 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 Output Power (dBm) Figure 9. 802.11g EVM vs Output Power @ 2.45 GHz, 54 Mbps Table 5. SKY13350-385LF Truth Table1 VCTL1 (Pin 1) VCTL2 (Pin 5) INPUT to OUTPUT1 Path INPUT to OUTPUT2 Path 1 0 Insertion loss Isolation 0 1 Isolation Insertion loss 1 “1” = +1.6 V to +5 V. “0” = 0 V to +0.2 V. Any state other than described in this table places the switch into an undefined state. An undefined state will not damage the device. Evaluation Board Description Package and Handling Information The SKY13350-385LF Evaluation Board is used to test the Instructions on the shipping container label regarding exposure to performance of the SKY13350-385LF SPDT Switch. An Evaluation moisture after the container seal is broken must be followed. Board schematic diagram is provided in Figure 10. An assembly Otherwise, problems related to moisture absorption may occur drawing for the Evaluation Board is shown in Figure 11. when the part is subjected to high temperature during solder assembly. The SKY13350-385LF is rated to Moisture Sensitivity Level 1 Package Dimensions (MSL1) at 260 C. It can be used for lead or lead-free soldering. It The PCB layout footprint for the SKY13350-385LF is provided in can be used for lead or lead-free soldering. For additional Figure 12. Typical part markings are shown in Figure 13. Package information, refer to the Skyworks Application Note, Solder Reflow dimensions are shown in Figure 14, and tape and reel dimensions Information, document number 200164. are provided in Figure 15. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201174H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 8, 2017 5

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH INPUT C2 VCTL1 VCTL2 C4 C5 OUTPUT1 OUTPUT2 C1 C3 For low frequency performance, larger value blocking capacitors (>1000 pF for operation at 10 MHz) are required. S1761a Figure 10. SKY13350-385LF Evaluation Board Schematic VCTL1 0 or +3 V DC Source (Pin 1) Output 1 C1 C4 C2 Input C5 C3 Output 2 VCTL2 0 or +3 V DC Source (Pin 5) S1762 Figure 11. SKY13350-385LF Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 September 8, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201174H

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH 6X 0.65 2X 0.20 4X 0.33 Pin 1 4X 0.15 Pitch 0.50 2X 0.51 Part Outline Exposed Soldering Area CL S1982 Figure 12. SKY13350-385LF PCB Layout Footprint (Top View) Pin 1 Indicator Skyworks Part Number 201174-013 Figure 13. Typical Part Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201174H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 8, 2017 7

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH Seating Plane C 0.45 +0.05/–0.04 1 A 0.05 X 45° Pin 1 B 0.02 +0.03/–0.02 Pin 1 Indicator Indicator 1 0.5 2X 0.05 C 6X 3 See Detail A See Detail B 0.10 C 0.08 C 2X 0.05 C Top View Side View Bottom View 0.2 ± 0.05 5 0.174 ± 0.05 R0.08 Typ. 0.10 M C A B R0.08 Typ. 0.2 ± 0.05 0.356 ± 0.05 5 0.10 M C A B Detail B Detail A (2X) (4X) All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. S1760 Figure 14. SKY13350-385LF Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 September 8, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201174H

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH 201174-015 Figure 15. SKY13350-385LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201174H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 8, 2017 9

DATA SHEET • SKY13350-385LF: 0.01 TO 6.0 GHz GaAS SPDT SWITCH Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SKY13350-385LF SPDT Switch SKY13350-385LF SKY13350-385LF-EVB Copyright © 2009-2010, 2012-2013, 2017 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 10 September 8, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201174H