DATA SHEET SKY13320-374LF: 0.1 to 6.0 GHz GaAs SPDT Switch Applications  Two-way radios J2 J1  WiMAX  WLANs Features  Broadband frequency range: 0.1 to 6.0 GHz  Low insertion loss: 0.5 dB @ 2.4 GHz  High isolation: 28 dB @ 0.9 GHz 201097-001  High P0.1dB: +33 dBm @ 3.0 V RFC  Operating voltage range from 1.8 to 5.0 V Figure 1. SKY13320-374LF Block Diagram  Small MLPD (6-pin, 1.5 x 1.5 mm) package (MSL1, 260 C per JEDEC J-STD-020) Description The SKY13320-374LF is a pHEMT GaAs FET I/C high-power switch. The switch is an ideal choice for two-way radios, WiMAX, Skyworks GreenTM products are compliant with and WLAN applications such as 802.11 a/b/g where low loss, high all applicable legislation and are halogen-free. isolation, and excellent linearity are key requirements. For additional information, refer to Skyworks The switch is manufactured in a compact, 1.5 x 1.5 mm, 6-pin Definition of GreenTM, document number exposed pad plastic Micro Leadframe Package Dual (MLPD) SQ04-0074. package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in V1 1 6 J1 Table 1. RFC GND 2 5 V2 J2 3 4 201097-002 Figure 2. SKY13320-374LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201097G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 12, 2018 1

DATA SHEET • SKY13320-374LF: SPDT SWITCH Table 1. SKY13320-374LF Signal Descriptions Pin Name Description Pin Name Description 1 V1 DC control voltage 4 J2 RF output1 2 RFC RF common input (Note 1) 5 GND Ground 3 V2 DC control voltage 6 J1 RF output1 1 A 47 pF blocking capacitor is required for >1 GHz operation. Use larger value capacitors for lower frequency operation. Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13320-374LF are Typical performance characteristics of the SKY13320-374LF are provided in Table 2. The recommended operating conditions are illustrated in Figures 3 through 5. specified in Table 3 and electrical specifications are provided in The state of the SKY13320-374LF is determined by the logic Table 4. provided in Table 5. Table 2. SKY13320-374LF Absolute Maximum Ratings1 Parameter Symbol Minimum Typical Maximum Units Input power @ 3.3 V (f > 100 MHz) PIN +37 dBm Voltage range VCTL 1.8 7.0 V Storage temperature TSTG -65 +150 C Junction temperature TJ +150 C Operating temperature TOP -40 +85 C Thermal resistance ΘJC 42 C/W 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SKY13320-374LF Recommended Operating Conditions Parameter Symbol Min Typ Max Units Frequency f 0.1 6.0 GHz Control voltage: Low VCTL_L 0 0.2 V High VCTL_H 1.8 5.0 V Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 January 12, 2018 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201097G

DATA SHEET • SKY13320-374LF: SPDT SWITCH Table 4. SKY13320-374LF Electrical Specifications1 (VCTL = 0 V and +3.0 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typ Max Units 0.1-0.9 GHz 0.40 0.55 dB 2.4-2.5 GHz 0.50 0.65 dB Insertion loss 3.3-3.8 GHz 0.50 0.65 dB 4.9-6.0 GHz 0.60 0.80 dB 0.1-0.9 GHz 25 28 dB 2.4-2.5 GHz 22 25 dB Isolation 3.3-3.8 GHz 23 26 dB 4.9-6.0 GHz 21 24 dB 0.1-0.9 GHz 30 dB Return loss (insertion loss state) 2 2.4-2.5 GHz 25 dB 3.3-3.8 GHz 20 dB 4.9-6.0 GHz 20 dB Switching characteristics: Rise/fall time 10/90% or 90/10% RF 40 ns On/off time 50% VCTL to 90/10% RF 80 ns Video feedthrough 45 mV f = 2.45 GHz Input power for 0.1 dB compression VCTL = 3.0 V, +33 dBm VCTL = 1.8 V +27 dBm PIN = +17 dBm/tone, Input IP3 IIP3 tone spacing = 1 MHz, f = 2.45 GHz +52 dBm 2nd harmonic 2fo PIN = +22 dBm CW, f = 2.45 GHz -66 dBc 3rd harmonic 3fo PIN = +22 dBm CW, f = 2.45 GHz -60 dBc Power dissipation VCTL = 3.0 V, ICTL = 5 μA 15 μW Supply current ICTL 5 μA 1 Performance is guaranteed only under the conditions listed in this table. 2 Lower frequency return loss is dependent on the DC blocking capacitor value. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201097G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 12, 2018 3

DATA SHEET • SKY13320-374LF: SPDT SWITCH Typical Performance Characteristics (VCTL = 0 V and +3.0 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [Zo] = 50 Ω, Blocking Capacitors = 47 pF, Unless Otherwise Noted) 0 –5 RFC to J1 0 RFC to J2 –0.1 –10 –0.2 RRFFCC ttoo JJ12 –15 Insertion Loss (dB) –––––00000.....76543 Isolation (dB) –––322050 –35 –––100...098 201097-003 ––4450 201097-004 0 1 2 3 4 5 6 0 1 2 3 4 5 6 Frequency (GHz) Frequency (GHz) Figure 3. Typical Insertion Loss Figure 4. Typical Isolation 0 –5 RFC to J1 RFC to J2 –10 –15 B) –20 d oss ( –25 L n –30 ur Ret –35 –––445050 201097-005 0 1 2 3 4 5 6 Frequency (GHz) Figure 5. Typical Return Loss Table 5. SKY13320-374LF Truth Table V1 (Pin 1) V2 (Pin 3) RFC to J1 Path RFC to J2 Path 1 0 Insertion loss Isolation 0 1 Isolation Insertion loss 1 1 undefined undefined 0 0 undefined undefined 1 “1” = +1.8 V to +5 V. “0” = 0 V to +0.2 V. Any state other than described in this table places the switch into an undefined state. An undefined state will not damage the device. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 January 12, 2018 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201097G

DATA SHEET • SKY13320-374LF: SPDT SWITCH Evaluation Board Description Package and Handling Information The SKY13320-374LF Evaluation Board is used to test the Instructions on the shipping container label regarding exposure to performance of the SKY13320-374LF SPDT Switch. An Evaluation moisture after the container seal is broken must be followed. Board schematic diagram is provided in Figure 6. An assembly Otherwise, problems related to moisture absorption may occur drawing for the Evaluation Board is shown in Figure 7. when the part is subjected to high temperature during solder assembly. The SKY13320-374LF is rated to Moisture Sensitivity Level 1 Package Dimensions (MSL1) at 260 C. It can be used for lead or lead-free soldering. The PCB layout footprint for the SKY13320-374LF is provided in For additional information, refer to the Skyworks Application Note, Figure 8. Typical part markings are shown in Figure 9. Package Solder Reflow Information, document number 200164. dimensions are shown in Figure 10, and tape and reel dimensions Care must be taken when attaching this product, whether it is are provided in Figure 11. done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. C BL DC Control 1 V1 J1 6 RF Output Voltage (1.8-5.0 V) C BL RF Common 2 RFC GND 5 Input C DC Control 3 V2 J2 4 BL Voltage (1.8-5.0 V) RF Output 201097-006 CBL = 47 pF for >1 GHz operation. Exposed ground paddle should be grounded for best performance. Figure 6. SKY13320-374LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201097G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 12, 2018 5

DATA SHEET • SKY13320-374LF: SPDT SWITCH RFC V2 CBL RF2 V1 CBL CBL RF1 201097-007 Figure 7. SKY13320-374LF Evaluation Board Assembly Diagram 6X 0.55 0.15 X 45o 6X 0.35 6X 0.25 0.60 0.50 Pitch 1.20 0.05 7X Exposed Solder 0.20 Area 0.35 0.70 201097-008 Figure 8. SKY13320-374LF PCB Layout Footprint (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 January 12, 2018 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201097G

DATA SHEET • SKY13320-374LF: SPDT SWITCH Pin 1 Indicator Skyworks Part # 201097-009 Figure 9. Typical Part Markings (Top View) 201097-010 Figure 10. SKY13320-374LF Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201097G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 12, 2018 7

DATA SHEET • SKY13320-374LF: SPDT SWITCH 4.00 ± 0.10 ϕ1.50± 0.10 2.00 ± 0.05 0.20 ± 0.02 (T) 1.75 ± 0.10 Pin 1 5o Max B ± 0.05 –0.10 ± 0.05 (Bo) A A 3.50 8.00 +0.30/ 8 7 1. B 0.69 ± 0.05 (Ko) ϕ0.50± 0.05 Detail B 5o Max 1.78 ± 0.05 (Ao) Detail A Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. All measurements are in millimeters. 5. Pin 1 orientation is in lower left corner for SOT-666 packages. Pin 1 orientation is in upper left corner for 1.5 x 1.5 mm 201097-011 MLPD, QFN, and DFN packages. Figure 11. SKY13320-374LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 January 12, 2018 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201097G

DATA SHEET • SKY13320-374LF: SPDT SWITCH Ordering Information Product Description Product Part Number Evaluation Board Part Number SKY13320-374LF SPDT Switch SKY13320-374LF SKY13320-374LF-EVB Copyright © 2009, 2010, 2012, 2017-2018 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201097G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 12, 2018 9