DATA SHEET SKY12208-306LF: 0.02 to 2.7 GHz 50 W High Power Silicon PIN Diode SPDT Switch Applications ANT  Transmit/receive and fail-safe switching in land mobile radios, public safety radios, and military communication systems Features RX TX  High power handling: 50 W CW, 300 W peak  Low insertion loss: 0.3 dB typical  High isolation: 42 dB typical RX_BIAS Exposed  Controlled with positive power supply Paddle  Bias driver circuit available on request S2403  Small, QFN (16-pin, 4 x 4 mm) Pb-free package (MSL1, 260 C per JEDEC J-STD-020) Figure 1. SKY12208-306LF Block Diagram Skyworks Green™ products are compliant with Description all applicable legislation and are halogen-free. The SKY12208-306LF is a high power handling, Single-Pole, For additional information, refer to Skyworks Double-Throw (SPDT) silicon PIN diode switch. The device can Definition of Green™, document number cover two frequency bands, 0.02 to 0.70 GHz or 0.05 to 2.7 GHz, SQ04-0074. by changing the value of an RF choke in the SMT bias network. The different Evaluation Board components for each band are noted in Table 10. The SKY12208-306LF features low insertion loss, excellent power handling, and superb linearity with low DC power consumption. The device is well-suited for use as a high power transmit/receive switch in a variety of telecommunication systems. The device is provided in a 4 x 4 mm, 16-pin Quad Flat No-Lead (QFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 1

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH N/C GND TX GND 16 15 14 13 GND 1 12 N/C ANT 2 11 N/C GND 3 10 N/C N/C 4 9 RX_BIAS 5 6 7 8 C D X D N/ GN R GN S2401 Figure 2. SKY12208-306LF Pinout – 16-Pin QFN (Top View) Table 1. SKY12208-306LF Signal Descriptions Pin Name Description Pin Name Description 1 GND Ground. Must be connected to ground using 9 RX_BIAS RF ground port and DC bias input port lowest possible impedance. 2 ANT Antenna RF port and DC bias input port 10 N/C No connection 3 GND Ground. Must be connected to ground using 11 N/C No connection lowest possible impedance. 4 N/C No connection 12 N/C No connection 5 N/C No connection 13 GND Ground. Must be connected to ground using lowest possible impedance. 6 GND Ground. Must be connected to ground using 14 TX Transmit RF input port and DC bias input lowest possible impedance. port 7 RX Receive output port and DC bias input port 15 GND Ground. Must be connected to ground using lowest possible impedance. 8 GND Ground. Must be connected to ground using 16 N/C No connection lowest possible impedance. Electrical and Mechanical Specifications The state of the SKY12208-306LF is determined by the logic provided in Table 8. Table 9 provides the logic for use with the The absolute maximum ratings of the SKY12208-306LF are SKY12208-306LF Evaluation Board. provided in Table 2. Recommended operating conditions are specified in Table 3 and electrical specifications are provided in Power derating data is plotted against temperature in Figures 19 Table 4 (28 V bias @ 0.25 GHz), Table 5 (5 V bias @ 0.25 GHz), and 20. Equivalent circuit diagrams for transmit and receive are Table 6 (5 V bias @ 2.0 GHz), and Table 7 (28 V bias @ 2.0 GHz). shown in Figure 21. Typical performance characteristics of the SKY12208-306LF are illustrated in Figures 3 through 8 (0.25 GHz) and Figures 9 through 18 (2.0 GHz). Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 2. SKY12208-306LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units RF CW input power, TX and ANT ports (TSUBSTRATE = 25 °C) PIN 75 W RF peak input power, TX and ANT ports (TSUBSTRATE = 25 °C, RF burst PIN 300 W width = 10 μs, RF burst repetition rate = 25 kHz) RF CW input power, RX port (TSUBSTRATE = 25 °C) PIN 60 W RF peak input power, RX port (TSUBSTRATE = 25 °C, RF burst width = PIN 240 W 10 μs, RF burst repetition rate = 25 kHz) Control port reverse voltage VCTL 200 V Control port forward current ICTL 200 mA Operating temperature TOP –55 +175 C Storage temperature TSTG –55 +200 C Electrostatic discharge: ESD Charged Device Model (CDM), Class 4 1000 V Human Body Model (HBM), Class 1A 250 V Machine Model (MM), Class B 150 V Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. Recommended Operating Conditions (Per ANT, TX, RX, and RX_BIAS Inputs) Parameter Symbol Min Typical Max Units Control port reverse voltage VCTL 5 28 100 V Control port forward current ICTL 20 50 100 mA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 3

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 4. SKY12208-306LF Electrical Specifications, Bias Voltage = 28 V (1 of 2) (Note 1) (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.02 to 0.70 GHz Operation, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Insertion loss, TX to ANT ports ILTX-ANT VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, TX port PIN @ pin 14 = 0 dBm: 0.02 GHz 0.39 0.50 dB 0.05 GHz 0.16 0.30 dB 0.25 GHz 0.10 0.25 dB 0.50 GHz 0.18 0.40 dB 0.70 GHz 0.40 0.90 dB Insertion loss, ANT to RX ports ILANT-RX VPIN_2 = 1 V, VPIN_14 = 28 V, IPIN_7 = –50 mA, VPIN_9 = 28 V, ANT port PIN @ pin 2 = 0 dBm: 0.02 GHz 0.29 0.50 dB 0.05 GHz 0.16 0.30 dB 0.25 GHz 0.10 0.25 dB 0.50 GHz 0.17 0.40 dB 0.70 GHz 0.40 0.90 dB Isolation, TX to RX ports Iso_TX-RX VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, TX port PIN @ pin 14 = 0 dBm: 0.02 GHz 45 49 dB 0.05 GHz 45 50 dB 0.25 GHz 38 42 dB 0.50 GHz 35 39 dB 0.70 GHz 34 39 dB Isolation, ANT to TX ports Iso_ANT-TX VPIN_2 = 1 V, VPIN_14 = 28 V, IPIN_7 = –50 mA, VPIN_9 = 28 V, ANT port PIN @ pin 2 = 0 dBm: 0.02 GHz 45 58 dB 0.05 GHz 45 49 dB 0.25 GHz 33 36 dB 0.50 GHz 27 31 dB 0.70 GHz 25 29 dB Isolation, ANT to RX ports Iso_ANT-RX VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, ANT port PIN @ pin 2 = 0 dBm: 0.02 GHz 45 49 dB 0.05 GHz 45 49 dB 0.25 GHz 38 41 dB 0.50 GHz 35 39 dB 0.70 GHz 34 39 dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 4. SKY12208-306LF Electrical Specifications, Bias Voltage = 28 V (2 of 2) (Note 1) (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.02 to 0.70 GHz Operation, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Input return loss 0.02 to 0.70 GHz: RX insertion loss state, ANT port (@ pin 2) 22 dB TX insertion loss state, TX port (@ pin 14) 23 dB Transmit 2nd harmonic 2fo TX insertion loss state, TX port PIN @ pin 14 = +30 dBm: 0.05 GHz –78 dBc 0.25 GHz –82 dBc 0.50 GHz –95 dBc 0.70 GHz –88 dBc Transmit 3rd harmonic 3fo TX insertion loss state, TX port PIN @ pin 14 = +30 dBm: 0.05 GHz –92 dBc 0.25 GHz –85 dBc 0.50 GHz –81 dBc 0.70 GHz –78 dBc Transmit 3rd Order Input Intercept Point IIP3 VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, TX port PIN @ pin 14 = 0 dBm/tone, tone spacing = 1 MHz, @ 0.25 GHz +45 dBm Maximum transmit CW input power PIN_CW VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, 0.02 to 0.70 GHz 50 W Maximum receive CW input power PIN_CW VPIN_2 = 1 V, VPIN_14 = 28 V, IPIN_7 = –50 mA, VPIN_9 = 28 V, 0.02 to 0.70 GHz 40 W Transmit RF switching time tSW 10% to 90% RF on, repetition rate = 0.5 MHz, @ 0.25 GHz 85 ns Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 5

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 5. SKY12208-306LF Electrical Specifications, Bias Voltage = 5 V (1 of 2) (Note 1) (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.02 to 0.70 GHz Operation, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Insertion loss, TX to ANT ports ILTX-ANT VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, TX port PIN @ pin 14 = 0 dBm: 0.02 GHz 0.37 0.50 dB 0.05 GHz 0.13 0.30 dB 0.25 GHz 0.10 0.25 dB 0.50 GHz 0.17 0.40 dB 0.70 GHz 0.41 0.90 dB Insertion loss, ANT to RX ports ILANT-RX VPIN_2 = 1 V, VPIN_14 = 5 V, IPIN_7 = –50 mA, VPIN_9 = 5 V, ANT port PIN @ pin 2 = 0 dBm: 0.02 GHz 0.26 0.50 dB 0.05 GHz 0.13 0.30 dB 0.25 GHz 0.10 0.25 dB 0.50 GHz 0.17 0.40 dB 0.70 GHz 0.41 0.90 dB Isolation, TX to RX ports Iso_TX-RX VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, TX port PIN @ pin 14 = 0 dBm: 0.02 GHz 45 49 dB 0.05 GHz 45 49 dB 0.25 GHz 38 41 dB 0.50 GHz 35 39 dB 0.70 GHz 34 39 dB Isolation, ANT to TX ports Iso_ANT-TX VPIN_2 = 1 V, VPIN_14 = 5 V, IPIN_7 = –50 mA, VPIN_9 = 5 V, ANT port PIN @ pin 2 = 0 dBm: 0.02 GHz 45 61 dB 0.05 GHz 45 50 dB 0.25 GHz 33 37 dB 0.50 GHz 27 31 dB 0.70 GHz 25 29 dB Isolation, ANT to RX ports Iso_ANT-RX VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, ANT port PIN @ pin 2 = 0 dBm: 0.02 GHz 45 49 dB 0.05 GHz 45 49 dB 0.25 GHz 38 41 dB 0.50 GHz 35 39 dB 0.70 GHz 34 39 dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 5. SKY12208-306LF Electrical Specifications, Bias Voltage = 5 V (2 of 2) (Note 1) (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.02 to 0.70 GHz Operation, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Input return loss 0.02 to 0.70 GHz: RX insertion loss state, ANT port (@ pin 2) 22 dB TX insertion loss state, TX port (@ pin 14) 24 dB Transmit 2nd harmonic 2fo TX insertion loss state, TX port PIN @ pin 14 = +30 dBm: 0.05 GHz –31 dBc 0.25 GHz –40 dBc 0.50 GHz –50 dBc 0.70 GHz –55 dBc Transmit 3rd harmonic 3fo TX insertion loss state, TX port PIN @ pin 14 = +30 dBm: 0.05 GHz –36 dBc 0.25 GHz –43 dBc 0.50 GHz –52 dBc 0.70 GHz –67 dBc Transmit 3rd Order Input Intercept Point IIP3 VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, TX port PIN @ pin 14 = 0 dBm/tone, tone spacing = 1 MHz, @ 0.25 GHz +45 dBm Maximum transmit CW input power PIN_CW VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, 0.02 to 0.70 GHz 15 W Maximum receive CW input power PIN_CW VPIN_2 = 1 V, VPIN_14 = 5 V, IPIN_7 = 50 mA, VPIN_9 = 5 V, 0.02 to 0.70 GHz 10 W Transmit RF switching time tSW 10% to 90% RF on, repetition rate = 0.5 MHz, @ 0.25 GHz 85 ns Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 7

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 6. SKY12208-306LF Electrical Specifications, Bias Voltage = 28 V (1 of 2) (Note 1) (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.05 to 2.70 GHz Operation, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Insertion loss, TX to ANT ports ILTX-ANT VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, TX port PIN @ pin 14 = 0 dBm: 0.05 GHz 0.36 dB 0.50 GHz 0.25 dB 1.00 GHz 0.29 dB 1.50 GHz 0.35 dB 2.00 GHz 0.42 dB 2.50 GHz 0.46 dB Insertion loss, ANT to RX ports ILANT-RX VPIN_2 = 1 V, VPIN_14 = 28 V, IPIN_7 = –50 mA, VPIN_9 = 28 V, ANT port PIN @ pin 2 = 0 dBm: 0.05 GHz 0.43 dB 0.50 GHz 0.24 dB 1.00 GHz 0.30 dB 1.50 GHz 0.40 dB 2.00 GHz 0.49 dB 2.50 GHz 0.53 dB Isolation, TX to RX ports Iso_TX-RX VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, TX port PIN @ pin 14 = 0 dBm: 0.05 GHz 48 dB 0.50 GHz 42 dB 1.00 GHz 46 dB 1.50 GHz 49 dB 2.00 GHz 41 dB 2.50 GHz 34 dB Isolation, ANT to TX ports Iso_ANT-TX VPIN_2 = 1 V, VPIN_14 = 28 V, IPIN_7 = –50 mA, VPIN_9 = 28 V, ANT port PIN @ pin 2 = 0 dBm: 0.05 GHz 51 dB 0.50 GHz 31 dB 1.00 GHz 25 dB 1.50 GHz 23 dB 2.00 GHz 21 dB 2.50 GHz 20 dB Isolation, ANT to RX ports Iso_ANT-RX VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, ANT port PIN @ pin 2 = 0 dBm: 0.05 GHz 49 dB 0.50 GHz 42 dB 1.00 GHz 44 dB 1.50 GHz 45 dB 2.00 GHz 38 dB 2.50 GHz 33 dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 6. SKY12208-306LF Electrical Specifications, Bias Voltage = 28 V (2 of 2) (Note 1) (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.05 to 2.70 GHz Operation, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Input return loss 0.05 to 2.70 GHz: RX insertion loss state, ANT port (@ pin 2) 21 dB TX insertion loss state, TX port (@ pin 14) 20 dB Transmit 2nd harmonic 2fo TX insertion loss state, TX port PIN @ pin 14 = +30 dBm: 0.05 GHz –78 dBc 0.50 GHz –82 dBc 1.00 GHz –95 dBc 1.50 GHz –88 dBc 2.00 GHz –85 dBc 2.50 GHz –80 dBc Transmit 3rd harmonic 3fo TX insertion loss state, TX port PIN @ pin 14 = +30 dBm: 0.05 GHz –92 dBc 0.50 GHz –85 dBc 1.00 GHz –81 dBc 1.50 GHz –78 dBc 2.00 GHz –75 dBc 2.50 GHz –70 dBc Transmit 3rd Order Input Intercept Point IIP3 VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, TX port PIN @ pin 14 = +30 dBm/tone, tone spacing = 1 MHz, @ 2.0 GHz +77 dBm Maximum transmit CW input power PIN_CW VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 28 V, 0.05 to 2.70 GHz 50 W Maximum receive CW input power PIN_CW VPIN_2 = 1 V, VPIN_14 = 28 V, IPIN_7 = 50 mA, VPIN_9 = 28 V, 0.05 to 2.70 GHz 40 W Transmit RF switching time tSW 10% to 90% RF on, repetition rate = 0.5 MHz, @ 2.0 GHz 85 ns Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 9

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 7. SKY12208-306LF Electrical Specifications, Bias Voltage = 5 V (1 of 2) (Note 1) (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.05 to 2.70 GHz Operation, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Insertion loss, TX to ANT ports ILTX-ANT VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, TX port PIN @ pin 14 = 0 dBm: 0.05 GHz 0.27 dB 0.50 GHz 0.25 dB 1.00 GHz 0.31 dB 1.50 GHz 0.37 dB 2.00 GHz 0.44 dB 2.50 GHz 0.50 dB Insertion loss, ANT to RX ports ILANT-RX VPIN_2 = 1 V, VPIN_14 = 5 V, IPIN_7 = –50 mA, VPIN_9 = 5 V, ANT port PIN @ pin 2 = 0 dBm: 0.05 GHz 0.40 dB 0.50 GHz 0.25 dB 1.00 GHz 0.33 dB 1.50 GHz 0.42 dB 2.00 GHz 0.50 dB 2.50 GHz 0.58 dB Isolation, TX to RX ports Iso_TX-RX VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, TX port PIN @ pin 14 = 0 dBm: 0.05 GHz 49 dB 0.50 GHz 41 dB 1.00 GHz 45 dB 1.50 GHz 49 dB 2.00 GHz 40 dB 2.50 GHz 34 dB Isolation, ANT to TX ports Iso_ANT-TX VPIN_2 = 1 V, VPIN_14 = 5 V, IPIN_7 = –50 mA, VPIN_9 = 5 V, ANT port PIN @ pin 2 = 0 dBm: 0.05 GHz 51 dB 0.50 GHz 31 dB 1.00 GHz 25 dB 1.50 GHz 22 dB 2.00 GHz 21 dB 2.50 GHz 19 dB Isolation, ANT to RX ports Iso_ANT-RX VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, ANT port PIN @ pin 2 = 0 dBm: 0.05 GHz 48 dB 0.50 GHz 41 dB 1.00 GHz 44 dB 1.50 GHz 44 dB 2.00 GHz 38 dB 2.50 GHz 32 dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 10 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Table 7. SKY12208-306LF Electrical Specifications, Bias Voltage = 5 V (2 of 2) (Note 1) (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.05 to 2.70 GHz Operation, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Input return loss 0.05 to 2.70 GHz: RX insertion loss state, ANT port (@ pin 2) 21 dB TX insertion loss state, TX port (@ pin 14) 20 dB Transmit 2nd harmonic 2fo TX insertion loss state, TX port PIN @ pin 14 = +30 dBm: 0.05 GHz –31 dBc 0.50 GHz –40 dBc 1.00 GHz –50 dBc 1.50 GHz –55 dBc 2.00 GHz –50 dBc 2.50 GHz –45 dBc Transmit 3rd harmonic 3fo TX insertion loss state, TX port PIN @ pin 14 = +30 dBm: 0.05 GHz –36 dBc 0.50 GHz –43 dBc 1.00 GHz –52 dBc 1.50 GHz –67 dBc 2.00 GHz –55 dBc 2.50 GHz –45 dBc Transmit 3rd Order Input Intercept Point IIP3 VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, TX port PIN @ pin 14 = +30 dBm/tone, tone spacing = 1 MHz, @ 2.0 GHz +56 dBm Maximum transmit CW input power PIN_CW VPIN_2 = 1 V, IPIN_14 = –50 mA, IPIN_9 = –50 mA, VPIN_7 = 5 V, 0.05 to 2.70 GHz 15 W Maximum receive CW input power PIN_CW VPIN_2 = 1 V, VPIN_14 = 5 V, IPIN_7 = 50 mA, VPIN_9 = 5 V, 0.05 to 2.70 GHz 10 W Transmit RF switching time tSW 10% to 90% RF on, repetition rate = 0.5 MHz, @ 2.0 GHz 85 ns Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 11

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Typical Performance Characteristics (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.02 to 0.70 GHz Operation, Unless Otherwise Noted) 0 0 –0.1 –0.1 –0.2 –0.2 Insertion Loss (dB) –––––00000.....76543 Insertion Loss (dB) –––––00000.....76354 –0.8 ||SS2311||:: AANNTT ttoo TRXX iinn IInnsseerrttiioonn LLoossss SSttaattee –0.8 –0.9 –0.9 ||SS2311||:: AANNTT ttoo TRXX iinn IInnsseerrttiioonn LLoossss SSttaattee –1.0 –1.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Frequency (GHz) Frequency (GHz) Figure 3. Insertion Loss vs Frequency Figure 4. Insertion Loss vs Frequency (ANT to RX and ANT to TX Ports; VCTL = 28 V, ICTL = –50 mA) (ANT to RX and ANT to TX Ports; VCTL = 5 V, ICTL = –50 mA) 0 0 –5 –5 |S21|: ANT to RX Isolation with ANT to TX in Insertion Loss State |S31|: ANT to TX Isolation with ANT to RX in Insertion Loss State –10 –10 |S32|: RX to TX Isolation with ANT to TX in Insertion Loss State –15 –15 –20 –20 Isolation (dB) ––––43320055 Isolation (dB) ––––43320055 –45 –45 –50 |S21|: ANT to RX Isolation with ANT to TX in Insertion Loss State –50 |S31|: ANT to TX Isolation with ANT to RX in Insertion Loss State –55 |S32|: RX to TX Isolation with ANT to TX in Insertion Loss State –55 –60 –60 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Frequency (GHz) Frequency (GHz) Figure 5. Isolation vs Frequency Figure 6. Isolation vs Frequency (ANT to RX, TX to RX, and ANT to TX Ports; (ANT to RX, TX to RX, and ANT to TX Ports; VCTL = 28 V, ICTL = –50 mA) VCTL = 5 V, ICTL = –50 mA) 0 0 –5 ||SS1212||:: ARNX TR Reteutrunr nL oLsoss sw withit hA NANT Tto t oT XT Xin i nIn Isnesretriotino nL oLsoss sS tSattaete –5 ||SS1212||:: ARNX TR Reteutrunr nL oLsoss sw withit hA NANT Tto t oT XT Xin i nIn Isnesretriotino nL oLsoss sS tSattaete –10 |S33|: TX Return Loss with ANT to TX in Insertion Loss State –10 |S33|: TX Return Loss with ANT to TX in Insertion Loss State |S11|: ANT Return Loss with ANT to RX in Insertion Loss State |S11|: ANT Return Loss with ANT to RX in Insertion Loss State Return Loss (dB) –––––3322150505 ||SS2323||:: RTXX RReettuurrnn LLoossss wwiitthh AANNTT ttoo RRXX iinn IInnsseerrttiioonn LLoossss SSttaattee Return Loss (dB) –––––3322105055 ||SS2323||:: RTXX RReettuurrnn LLoossss wwiitthh AANNTT ttoo RRXX iinn IInnsseerrttiioonn LLoossss SSttaattee –40 –40 –45 –45 –500.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 –500.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Frequency (GHz) Frequency (GHz) Figure 7. Return Loss vs Frequency Figure 8. Return Loss vs Frequency (ANT, TX, and RX Ports; VCTL = 28 V, ICTL = –50 mA) (ANT, TX, and RX Ports; VCTL = 5 V, ICTL = –50 mA) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 12 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Typical Performance Characteristics (TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, EVB Optimized for 0.05 to 2.70 GHz Operation, Unless Otherwise Noted) 0 0 –0.1 –0.1 –0.2 –0.2 Insertion Loss (dB) –––––00000.....76435 Insertion Loss (dB) –––––00000.....63457 –0.8 ||SS2311||:: AANNTT ttoo TRXX iinn IInnsseerrttiioonn LLoossss SSttaattee –0.8 –0.9 –0.9 ||SS3211||:: AANNTT ttoo TRXX iinn IInnsseerrttiioonn LLoossss SSttaattee –1.00.0 0.5 1.0 1.5 2.0 2.5 3.0 –1.00.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Figure 9. Insertion Loss vs Frequency Figure 10. Insertion Loss vs Frequency (ANT to RX and ANT to TX Ports; VCTL = 28 V, ICTL = –50 mA) (ANT to RX and ANT to TX Ports; VCTL = 5 V, ICTL = –50 mA) 0 0 –5 –5 |S21|: ANT to RX Isolation with ANT to TX in Insertion Loss State |S21|: ANT to RX Isolation with ANT to TX in Insertion Loss State |S31|: ANT to TX Isolation with ANT to RX in Insertion Loss State –10 |S31|: ANT to TX Isolation with ANT to RX in Insertion Loss State –10 |S32|: RX to TX Isolation with ANT to TX in Insertion Loss State |S32|: RX to TX Isolation with ANT to TX in Insertion Loss State –15 –15 Isolation (dB)––––33220505 Isolation (dB)––––33220505 –40 –40 –45 –45 –50 –50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Figure 11. Isolation vs Frequency Figure 12. Isolation vs Frequency (ANT to RX, TX to RX, and ANT to TX Ports; (ANT to RX, TX to RX, and ANT to TX Ports; VCTL = 28 V, ICTL = –50 mA) VCTL = 5 V, ICTL = –50 mA) 0 0 –5 –5 –10 –10 –15 –15 Return Loss (dB) ––––33220505 |S11|: ANT Return Loss with ANT to TX in Insertion Loss State Return Loss (dB) ––––33225050 |S11|: ANT Return Loss with ANT to TX in Insertion Loss State |S22|: RX Return Loss with ANT to TX in Insertion Loss State |S22|: RX Return Loss with ANT to TX in Insertion Loss State –40 ||SS3131||:: TAXN TR eRteutrunr nL oLsoss sw withit hA NATN Tto t oT XR Xin inIn sInesretirotnio nLo Lsoss Ss tSattaete –40 ||SS3131||:: TAXN TR eRteutrunr nL oLsoss sw withit hA NATN Tto t oT XR Xin inIn sInesretirotnio nLo Lsoss Ss tSattaete –45 |S22|: RX Return Loss with ANT to RX in Insertion Loss State |S22|: RX Return Loss with ANT to RX in Insertion Loss State |S33|: TX Return Loss with ANT to RX in Insertion Loss State –45 |S33|: TX Return Loss with ANT to RX in Insertion Loss State –500.0 0.5 1.0 1.5 2.0 2.5 3.0 –500.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Figure 13. Return Loss vs Frequency Figure 14. Return Loss vs Frequency (ANT, TX, and RX Ports; VCTL = 28 V, ICTL = –50 mA) (ANT, TX, and RX Ports; VCTL = 5 V, ICTL = –50 mA) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 13

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH 0 0 ––00..1200 225588 VV ,,VV ,,25 250000 mm mmAAAA ––00..1200 225588 VV ,,VV ,,25 250000 mm mmAAAA Insertion Loss (dB)–––––00000.....6574300000 Insertion Loss (dB)–––––00000.....6574300000 –0.80 –0.80 –0.90 –0.90 –1.00 –1.00 +30 +32 +34 +36 +38 +40 +42 +44 +46 +48 +30 +32 +34 +36 +38 +40 +42 +44 +46 +48 Input Power (dBm) Input Power (dBm) Figure 15. Insertion Loss vs CW Input Power Figure 16. Insertion Loss vs CW Input Power (ANT to RX Port, f = 0.25 GHz) (TX to ANT Port, f = 0.25 GHz) –0.50 –0.50 –0.55 28 V, 20 mA –0.55 2288 VV,, 2500 mmAA –0.60 258 V ,V ,2 500 m mAA –0.60 55 VV,, 2500 mmAA 5 V, 50 mA –0.65 Insertion Loss (dB)–––––00000.....8787605505 Insertion Loss (dB)––––0000....88775050 –0.90 –0.90 –0.95 –0.95 –1.0+028 +30 +32 +34 +36 +38 +40 +42 +44 +46 +48 –1.00+28 +30 +32 +34 +36 +38 +40 +42 +44 +46 +48 Input Power (dBm) Input Power (dBm) Figure 17. Insertion Loss vs CW Input Power Figure 18. Insertion Loss vs CW Input Power (ANT to RX Port, f = 2.0 GHz) (TX to ANT Port, f = 2.0 GHz) Table 8. SKY12208-306LF Truth Table Path Control Conditions Nominal Switch State Antenna-to- Transmitter-to- Antenna Port Bias Nominal Receiver Transmitter Port RX_BIAS Input Receiver Port Antenna Port Input Output Port Bias Input (Pin 9) (Pin 2 to Pin 7) (Pin 14 to Pin 2) (Pin 2) (Pin 7) (Pin 14) Receive Low insertion loss High isolation 1 V –50 mA 28 V 28 V (see Figure 21) Transmit High isolation Low insertion loss 1 V 28 V –50 mA –50 mA (see Figure 21) Table 9. SKY12208-306LF Evaluation Board Truth Table Path Control Conditions Switch State Antenna-to- Transmitter-to- Antenna Port Bias Receiver Output Transmitter Port RX_BIAS Input Receiver Port Antenna Port Input Port Bias Input Receive Low insertion loss High isolation 5 V 0 V (ground) 28 V 28 V (see Figure 21) Transmit High isolation Low insertion loss 5 V 28 V 0 V (ground) 0 V (ground) (see Figure 21) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 14 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH 60 ANT W) er ( 50 w o P 40 ent RX TX d nci 30 W I m C 20 u m axi 10 M 0 Transmit State 25 35 45 55 65 75 85 95 105 115 125 135 145 155 165 175 Temperature on Bottom of Package Ground Plane (°C) ANT Figure 19. Transmit Power Derating, Maximum CW Incident Power (Insertion Loss = 0.3 dB) vs Temperature on Bottom of Package Ground Plane RX TX 60 W) er ( 50 Receive State w nt Po 40 S2398 e d nci 30 Figure 21. SKY12208-306LF Equivalent Circuit Diagrams m CW I 20 u m axi 10 M 0 25 35 45 55 65 75 85 95 105 115 125 135 145 155 165 175 Temperature on Bottom of Printed Circuit Board (°C) Figure 20. Transmit Power Derating, Maximum CW Incident Power (Insertion Loss = 0.3 dB) vs Temperature on Bottom of Printed Circuit Board Evaluation Board Description derived from positive voltages. The state of the PIN diodes within the SKY12208-306LF is controlled with 5 V applied to the ANT The SKY12208-306LF Evaluation Board is used to test the port and bias voltages of either 28 V or 0 V applied to the performance of the SKY12208-306LF PIN Diode SPDT switch. An remaining bias inputs (RX and TX ports). The switch state circuit assembly drawing for the Evaluation Board is shown in Figure 22. diagrams are shown in Figure 21. The layer detail is provided in Figure 23. The value of resistor R1 (80 Ω) is selected to provide 50 mA of The SKY12208-306LF is designed to handle very large signals. forward current through the "on" series diode with 5 V applied to Sufficient power may be dissipated by this switch to cause the ANT port bias pin. The R2 resistance value of 540 Ω is heating of the PIN diodes contained in the switch. It is very selected to produce approximately 50 mA of forward bias current important to use a printed circuit board design that provides in the RX shunt diode with a source voltage of 28 V. adequate cooling capability to keep the junction temperature of the PIN diodes below their maximum rated operating temperature. The magnitudes of the voltages applied to the TX and RX ports determine which of the RX or TX series diodes is biased into As indicated in Figure 19, the x-axis temperature is referenced to forward conduction. For example, to place the SKY12208-478LF the bottom of the QFN package. A printed circuit board with a very into the transmit state, 0 V is applied to the TX port (which low thermal resistance and external heat sink design must be forward biases the diode between pins 2 and 14), 28 V is applied used to achieve the results shown in this Figure. The power to the RX port (which reverse biases the diode between pins 2 and derating curve with the x-axis temperature referenced to the 7), and 0 V is applied to the RX_BIAS port (which applies a bottom of the printed circuit board is provided in Figure 20. forward bias through R2 to the diode connected between pins 7 The evaluation circuit is designed to facilitate control of the and 9). SKY12208-306LF transmit/receive switch with bias signals Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 15

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH The component values shown in the Evaluation Board circuit Package and Handling Information diagram (Figure 24) were selected to optimize performance in the Instructions on the shipping container label regarding exposure to 0.02 to 0.70 GHz and 0.05 to 2.7 GHz bands. moisture after the container seal is broken must be followed. Refer to Table 10 for the Evaluation Board Bill of Materials. Otherwise, problems related to moisture absorption may occur Table 11 provides voltage, current, and resistor values for bias when the part is subjected to high temperature during solder adjustments. assembly. The SKY12208-306LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. Package Dimensions For additional information, refer to the Skyworks Application Note, The PCB layout footprint for the SKY12208-306LF is shown in Solder Reflow Information, document number 200164. Figure 25. Typical case markings are noted in Figure 26. Package Care must be taken when attaching this product, whether it is dimensions for the 16-pin QFN are shown in Figure 27, and tape done manually or in a production solder reflow environment. and reel dimensions are provided in Figure 28. Production quantities of this product are shipped in a standard tape and reel format. RFC3 GND TX 1 GND ANT ANT TX RFC2 H1 DC1 DC RX_BIAS GND RX 6 RX GND RFC1 S2399 Figure 22. SKY12208-306LF Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 16 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Cross Section Name Thickness (in) Material Top Soldermask L1 (0.0028) Cu foil Laminate 0.012 ± 0.0006 Rogers RO4003C Core L2 (0.0014) Cu foil Laminate (Note 1) FR4 Prepreg L3 (0.0014) Cu foil Laminate 0.010 ± 0.0006 FR4 Core L4 (0.0028) Cu foil Bottom Soldermask Note 1: Adjust this thickness to meet total thickness goal of 0.062 ± 0.005 inches. S2531 Figure 23. Layer Detail Physical Characteristics Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 17

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH C3 0 V/+28 V Transmitter Input Port × +5 V Antenna R1 L2 Transmitter Port Port Bias Input C8 C4 16 15 14 13 C5 Bias Input C D X D L1 N/ GN T GN 1 12 × GND N/C 2 11 × Antenna Port ANT N/C C1 3 10 × GND N/C × 4 9 L3 R2 0 V/+28 V DC Bias N/C RX_BIAS Input Port C6 +28 V/0 V Receiver Port Bias Input C9 N/C GND RX GND 5 6 7 8 L5 × Receiver Output Port C2 NOTE: The N/C pins (4, 5, 10, 11, 12, and 16) are not internally connected, so they can be left open or grounded. S2402 Figure 24. Evaluation Board Schematic Table 10. Evaluation Board Bill of Materials (Note 1) Component Value Size Product Number Manufacturer Mfr Part Number Characteristics C1, C2, C3, C4, C5, C6, C9 1000 pF 0603 5404R23-057 TDK C1608C0G1H102JT COG, 50 V, ±5% C8 1 μF 0603 5404R29-070 TDK C2012X7R1H104K X7R, 50 V, ±10% L1, L2, L5 (for 0.02 to 1200 nH 0603 – Coil Craft 0603LS-122XJLB SRF, 160 MHz, ±5% 0.7 GHz operation) L1, L2, L5 (for 0.05 to 820 nH 0603 – Coil Craft 0603LS-821XJLB SRF, 410 MHz, ±5% 2.7 GHz operation) L3 560 nH 0603 – Coil Craft 0603LS-561XJLB SRF, 525 MHz, ±5% R1 (Note 2) 80 Ω 0603 – Panasonic ERJ-3GEYJ161V 0.1 W, ±5% R2 (Note 3) 540 Ω – – – – Axial leaded (off board) Note 1: Component values selected are based on the desired frequency and bias level. Values may be adjusted for a specific response. Note 2: Two 160 Ω resistors are combined in parallel to achieve a minimum power handling requirement and 80 Ω resistance. Note 3: Evaluation Board does not include resistor R2. Operating at 28 V and 50 mA requires resistor R2 with a power dissipation greater than 1.35 W. Table 11. Component Calculation Values VS VDIODE VRES Current Resistance Power Dissipation (V) (V) (V) (A) (Ω) (W) 28 1 27 0.05 540 1.35 28 1 27 0.02 1350 0.54 5 1 4 0.05 80 0.20 5 1 4 0.02 200 0.08 Notes: Vs = supply voltage; VDIODE = voltage drop across the diode; VRES = voltage drop across the resistor. R1 and R2 values are calculated by (VS –VDIODE)/I, where I is the desired bias current. The power dissipation in R1 or R2 is calculated by I x (VS – VDIODE). The resistor selected must be safely rated with a power greater than the dissipated power. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 18 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH 16X 1.45 (To Metal Pads) 0.508 Pitch 0.65 0.762 Typ. 0.325 9X Plated Thru Vias See Detail A Metal GND Pad (Sq.) 2.15 0.30 Exposed Soldering Area 0.75 Detail A All measurements in millimeters S2274 Figure 25. SKY12208-306LF PCB Layout Footprint Pin 1 Indicator Skyworks Part # Lot # Date Code: (YY = Calendar Year WW = Week) Figure 26. Typical Case Markings Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 19

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH C 2.15 +0.10/–0.15 (0.2) 4 A B Seating Plane (1.075) Pin 1 Indicator (Option B) Pin 1 0.02 +0.03/–0.02 Exposed Pad Indicator Pin 1 Indicator (Option A) –0.15 4 0.20 Min. (1.075) 2.15 +0.10/ 16X 2X 0.15 C Detail A Detail B 2X 0.15 C 0.90 ± 0.10 4 0.10 C 0.08 C 16X Top View Side View Bottom View R0.12 Typ. 0.18 R0.20 0.55 ± 0.10 Pin 1 Indicator 0.18 0.345 (0.325) 0.30 +0.05 0.10 M C A B 0.65 0.345 Detail A Detail B Option A Option B Scale: 40X Scale: 20X Pin 1 Indicator Pin 1 Indicator 16 Places Even Terminal Side Scale: 10X Scale: 20X All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the exposed heat sink slug as well as the terminals. Package may have option A or option B pin 1 indicator. S2400 Figure 27. SKY12208-306LF 16-Pin QFN Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 20 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH 4.00 ± 0.10 0.30 ± 0.05 (T) 2.00 ± 0.05 8.00 ± 0.10 ∅1.50 +0.1/–0 1.75 ± 0.10 B Pin 1 Indicator 5 0 0 (Bo) A A 5.50 ± 0. 0 ± 0.30 1 0 0. 2. ± 1 5 3 4. B ∅1.50 Min. 1.10 ± 0.10 (Ko) R0.25 Typ. 4.35 ± 0.10 (Ao) B A Notes: 1. Carrier tape material: black conductive polystyrene, non-bakeable 2. Cover tape material: transparent conductive HSA 3. Cover tape size: 9.2 mm width 4. ESD surface resistivity is ≥1 x 105 ~ ≤ 1 x 1010 Ohms/square S1846 per EIA, JEDEC TNR Specification. 5. All measurements are in millimeters Figure 28. SKY12208-306LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202077C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 21

DATA SHEET • SKY12208-306LF: 50 W PIN DIODE SPDT SWITCH Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SKY12208-306LF PIN Diode SPDT Switch SKY12208-306LF SKY12208-306LF-EVB Copyright © 2012- 2014 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 22 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202077C