Si3442BDV Vishay Siliconix N-Channel 2.5-V (G-S) MOSFET FEATURES PRODUCT SUMMARY • Halogen-free According to IEC 61249-2-21 V (V) R (Ω) I (A) DS DS(on) D Definition 0.057 at VGS = 4.5 V 4.2 (cid:129) TrenchFET® Power MOSFET 20 0.090 at VGS = 2.5 V 3.4 (cid:129) Compliant to RoHS Directive 2002/95/EC TSOP-6 Top View (1, 2, 5, 6) D 1 6 3 mm 2 5 (3) G 3 4 2.85 mm Ordering Information:Si3442BDV-T1-E3 (Lead (Pb)-free) (4) S Si3442BDV-T1-GE3 (Lead (Pb)-free and Halogen-free) Marking Code: 2Bxxx N-Channel MOSFET ABSOLUTE MAXIMUM RATINGS T = 25 °C, unless otherwise noted A Parameter Symbol 5 s Steady State Unit Drain-Source Voltage VDS 20 V Gate-Source Voltage VGS ± 12 Continuous Drain Current (TJ = 150 °C)a TTAA == 2750 °°CC ID 43..24 32..04 A Pulsed Drain Current IDM 20 Continuous Source Current (Diode Conduction)a IS 1.4 0.72 TA = 25 °C 1.67 0.86 Maximum Power Dissipationa PD W TA = 70 °C 1.07 0.55 Operating Junction and Storage Temperature Range TJ, Tstg - 55 to 150 °C THERMAL RESISTANCE RATINGS Parameter Symbol Typical Maximum Unit t ≤ 5 s 75 100 Maximum Junction-to-Ambienta RthJA Steady State 120 145 °C/W Maximum Junction-to-Foot (Drain) Steady State RthJF 70 85 Note: a. Surface Mounted on FR4 board, t ≤ 5 s. Document Number: 72504 www.vishay.com S09-2110-Rev. E, 12-Oct-09 1

Si3442BDV Vishay Siliconix SPECIFICATIONS T = 25 °C, unless otherwise noted J Parameter Symbol Test Conditions Min. Typ. Max. Unit Static Gate Threshold Voltage VGS(th) VDS = VGS, ID = 250 µA 0.6 1.8 V Gate-Body Leakage IGSS VDS = 0 V, VGS = ± 12 V ± 100 nA VDS = 20 V, VGS = 0 V 1 Zero Gate Voltage Drain Current IDSS µA VDS = 20 V, VGS = 0 V, TJ = 70 °C 5 VDS = 5 V, VGS = 4.5 V 10 On-State Drain Currenta ID(on) A VDS = 5 V, VGS = 2.5 V 4 VGS = 4.5 V, ID = 4 A 0.045 0.057 Drain-Source On-State Resistancea RDS(on) Ω VGS = 2.5 V, ID = 3.4 A 0.070 0.090 Forward Transconductancea gfs VDS = 10 V, ID = 4.0 A 11.3 S Diode Forward Voltagea VSD IS = 1.6 A, VGS = 0 V 0.75 1.2 V Dynamicb Input Capacitance Ciss 295 Output Capacitance Coss VDS = 10 V, VGS = 0 V, f = 1 MHz 75 pF Reverse Transfer Capacitance Crss 45 Total Gate Charge Qg 3 5 Gate-Source Charge Qgs VDS = 10 V, VGS = 4.5 V, ID = 4.0 A 0.65 nC Gate-Drain Charge Qgd 0.95 Gate Resistance Rg f = 1 MHz 2.7 Ω Turn-On Delay Time td(on) 35 55 Rise Time tr VDD = 10 V, RL = 10 Ω 50 75 Turn-Off Delay Time td(off) ID ≅ 1 A, VGEN = 4.5 V, Rg = 6 Ω 20 30 ns Fall Time tf 15 25 Source-Drain Reverse Recovery Time trr IF = 1.6 A, dI/dt = 100 A/µs 30 60 Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. TYPICAL CHARACTERISTICS 25°C, unless otherwise noted 20 20 VGS = 5 V thru 3.5 V TC = -55 °C 16 3 V 16 A) A) 25 °C Current ( 12 2.5 V Current ( 12 125 °C Drain 8 Drain 8 - - D D I I 4 2 V 4 1.5 V 0 0 0 1 2 3 4 5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VDS -Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics www.vishay.com Document Number: 72504 2 S09-2110-Rev. E, 12-Oct-09

Si3442BDV Vishay Siliconix TYPICAL CHARACTERISTICS 25°C, unless otherwise noted 0.14 480 0.12 400 esistance ()Ω 00..0180 VGS = 2.5 V ance (pF) 320 Ciss - On-RS(on) 00..0046 VGS = 4.5 V C - Capacit 126400 D R Coss 80 0.02 Crss 0.00 0 0 4 8 12 16 20 0 4 8 12 16 20 ID - Drain Current (A) VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current Capacitance 5 1.4 VDS = 10 V VGS = 4.5 V ge (V) 4 ID = 4 A e 1.2 ID = 4 A a c olt an Gate-to-Source V 23 - On-ResistS(on)(Normalized) 1.0 - RD 0.8 S G 1 V 0 0.6 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 -50 -25 0 25 50 75 100 125 150 Qg - Total Gate Charge (nC) TJ - Junction Temperature (°C) Gate Charge On-Resistance vs. Junction Temperature 10 0.20 nt (A) 1 TJ = 150 °C nce ()Ω 0.16 ID = 4 A e a e Curr 0.1 TJ = 25 °C Resist 0.12 urc On- So - 0.08 - n) IS 0.01 RDS(o 0.04 0.0011 0.00 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 1 2 3 4 5 6 7 8 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source Voltage Document Number: 72504 www.vishay.com S09-2110-Rev. E, 12-Oct-09 3

Si3442BDV Vishay Siliconix TYPICAL CHARACTERISTICS 25°C, unless otherwise noted 0.3 8 0.2 0.1 6 ID = 250 µA Variance (V) -00..10 er (W) 4 STinAg =le 2 P5u °lsCe -0.2 w S(th) Po G -0.3 V 2 -0.4 -0.5 -0.6 0 -50 -25 0 25 50 75 100 125 150 0.01 0.1 1 10 100 600 TJ - Temperature (°C) Time (s) Threshold Voltage Single Pulse Power 100 IDM Limited Limited by RDS(on)* 10 µs 10 A) nt ( 100 µs e urr C 1 ain 1 ms Dr - 10 ms D I 0.1 STinAg =le 2 P5u °lsCe 100 ms 1 s, 10 s 100 s, DC BVDSS Limited 0.01 0.1 1 10 100 VDS-Drain-to-SourceVoltage(V) *VGS>minimumVGSatwhichRDS(on)isspecified Safe Operating Area 2 1 nt Duty Cycle = 0.5 e e Transiedance 0.2 ctivmp Notes: ed Effeermal I 0.1 0.1 PDM zh 0.05 maliT t1 Nor 0.02 1. Duty Cyclet,2 D = t1 t2 2. Per Unit Base = RthJA = 120°C/W Single Pulse 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted 0.01 10-4 10-3 10-2 10-1 1 10 100 600 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?72504. www.vishay.com Document Number: 72504 4 S09-2110-Rev. E, 12-Oct-09

Package Information Vishay Siliconix TSOP: 5/6−LEAD JEDEC Part N umber: MO-193C e1 e1 5 4 6 5 4 E1 E E1 E 1 1 2 3 2 3 -B- -B- e b 0.15 M C B A e b 0.15 M C B A 5-LEAD TSOP 6-LEAD TSOP -A- 4x 1 D 0.17 Ref R c A2 A R L 2 Gauge Plane Seating Plane Seating Plane L 0.08 C -C- A1 4x 1 (L1 ) MILLIMETERS INCHES Dim Min Nom Max Min Nom Max A 0.91 - 1.10 0.036 - 0.043 A1 0.01 - 0.10 0.0004 - 0.004 A2 0.90 - 1.00 0.035 0.038 0.039 b 0.30 0.32 0.45 0.012 0.013 0.018 c 0.10 0.15 0.20 0.004 0.006 0.008 D 2.95 3.05 3.10 0.116 0.120 0.122 E 2.70 2.85 2.98 0.106 0.112 0.117 E1 1.55 1.65 1.70 0.061 0.065 0.067 e 0.95 BSC 0.0374 BSC e 1 1.80 1.90 2.00 0.071 0.075 0.079 L 0.32 - 0.50 0.012 - 0.020 L 1 0.60 Ref 0.024 Ref L 2 0.25 BSC 0.010 BSC R 0.10 - - 0.004 - - 0 4 8 0 4 8 1 7 Nom 7 Nom ECN: C-06593-Rev. I, 18-Dec-06 DWG: 5540 Document Number: 71200 www.vishay.com 18-Dec-06 1

AN823 Vishay Siliconix (cid:1) Mounting LITTLE FOOT TSOP-6 Power MOSFETs Surface mounted power MOSFET packaging has been based on Since surface mounted packages are small, and reflow soldering integrated circuit and small signal packages. Those packages is the most common form of soldering for surface mount have been modified to provide the improvements in heat transfer components, “thermal” connections from the planar copper to the required by power MOSFETs. Leadframe materials and design, pads have not been used. Even if additional planar copper area is molding compounds, and die attach materials have been used, there should be no problems in the soldering process. The changed. What has remained the same is the footprint of the actual solder connections are defined by the solder mask packages. openings. By combining the basic footprint with the copper plane on the drain pins, the solder mask generation occurs automatically. The basis of the pad design for surface mounted power MOSFET A final item to keep in mind is the width of the power traces. The is the basic footprint for the package. For the TSOP-6 package absolute minimum power trace width must be determined by the outline drawing see http://www.vishay.com/doc?71200 and see amount of current it has to carry. For thermal reasons, this http://www.vishay.com/doc?72610 for the minimum pad footprint. minimum width should be at least 0.020 inches. The use of wide In converting the footprint to the pad set for a power MOSFET, you traces connected to the drain plane provides a low impedance must remember that not only do you want to make electrical path for heat to move away from the device. connection to the package, but you must made thermal connection and provide a means to draw heat from the package, and move it away from the package. REFLOW SOLDERING In the case of the TSOP-6 package, the electrical connections are very simple. Pins 1, 2, 5, and 6 are the drain of the MOSFET and are connected together. For a small signal device or integrated Vishay Siliconix surface-mount packages meet solder reflow circuit, typical connections would be made with traces that are reliability requirements. Devices are subjected to solder reflow as a 0.020 inches wide. Since the drain pins serve the additional test preconditioning and are then reliability-tested using function of providing the thermal connection to the package, this temperature cycle, bias humidity, HAST, or pressure pot. The level of connection is inadequate. The total cross section of the solder reflow temperature profile used, and the temperatures and copper may be adequate to carry the current required for the time duration, are shown in Figures 2 and 3. application, but it presents a large thermal impedance. Also, heat spreads in a circular fashion from the heat source. In this case the drain pins are the heat sources when looking at heat spread on the PC board. Figure 1 shows the copper spreading recommended footprint for the TSOP-6 package. This pattern shows the starting point for utilizing the board area available for the heat spreading copper. To create this pattern, a plane of copper overlays the basic pattern on pins 1,2,5, and 6. The copper plane connects the drain pins electrically, but more importantly provides planar copper to draw heat from the drain leads and start the process of spreading the heat so it can be dissipated into the ambient air. Notice that the planar copper is shaped like a “T” to move heat away from the drain leads in all directions. This pattern uses all the available area underneath the body for this purpose. 0.167 4.25 Ramp-Up Rate +6(cid:2)C/Second Maximum 0.074 Temperature @ 155 (cid:1) 15(cid:2)C 120 Seconds Maximum 1.875 0.014 0.122 0.35 3.1 Temperature Above 180(cid:2)C 70 − 180 Seconds 0.026 Maximum Temperature 240 +5/−0(cid:2)C 0.65 Time at Maximum Temperature 20 − 40 Seconds Ramp-Down Rate +6(cid:2)C/Second Maximum 0.049 0.049 0.010 1.25 1.25 0.25 FIGURE 1. Recommended Copper Spreading Footprint FIGURE 2. Solder Reflow Temperature Profile Document Number: 71743 www.vishay.com 27-Feb-04 1

AN823 Vishay Siliconix 10 s (max) 255 − 260(cid:2)C 1(cid:2)4(cid:2)C/s (max) 3-6(cid:2)C/s (max) 217(cid:2)C 140 − 170(cid:2)C 60 s (max) 3(cid:2)C/s (max) 60-120 s (min) Reflow Zone Pre-Heating Zone Maximum peak temperature at 240(cid:2)C is allowed. FIGURE 3. Solder Reflow Temperature and Time Durations THERMAL PERFORMANCE A basic measure of a device’s thermal performance is the On-Resistance vs. Junction Temperature junction-to-case thermal resistance, R(cid:1) , or the 1.6 jc junction-to-foot thermal resistance, R(cid:1)jf. This parameter is VGS = 4.5 V measured for the device mounted to an infinite heat sink and ID = 6.1 A is therefore a characterization of the device only, in other 1.4 e words, independent of the properties of the object to which the c n a doef vthicee T isS OmPo-u6n.ted. Table 1 shows the thermal performance esiistzed) 1.2 n-Rmali TABLE 1. − On)(Nor 1.0 o S( D Equivalent Steady State Performance—TSOP-6 r 0.8 Thermal Resistance R(cid:1)jf 30(cid:2)C/W 0.6 −50 −25 0 25 50 75 100 125 150 SYSTEM AND ELECTRICAL IMPACT OF TJ − Junction Temperature ((cid:2)C) TSOP-6 FIGURE 4. Si3434DV In any design, one must take into account the change in MOSFET r with temperature (Figure 4). DS(on) www.vishay.com Document Number: 71743 2 27-Feb-04

Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR TSOP-6 0.099 (2.510) 9 3) 4 6) 1 2 6 2 1 0 0 6 0. 3. 0. 1. ( ( 8 9) 2 9 0 6 0. 0. ( 0.039 0.020 0.019 (1.001) (0.508) (0.493) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index Return to Index E T O N N O I T A C I L P P A www.vishay.com Document Number: 72610 26 Revision: 21-Jan-08

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: SI3442BDV-T1-E3 SI3442BDV-T1-GE3