SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Standard Metal Film Leaded Resistors FEATURES • Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) • Low noise (max. 1.5 μV/V for R > 1 M) • Compatible to both lead (Pb)-free and lead containing soldering processes • Material categorization:  for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • General purpose resistors A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are welded to the end-caps. The resistors are coated with a colored lacquer (light-blue for type SFR16S; light-green for type SFR25 and red-brown for type SFR25H) which provides electrical, mechanical, and climatic protection. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45. TECHNICAL SPECIFICATIONS DESCRIPTION SFR16S SFR25 SFR25H DIN size 0204 0207 0207 Resistance range 1 to 3 M; jumper (0  0.22 to 10 M; jumper (0  0.22 to 10 M Resistance tolerance ± 5 %; ± 1 % Temperature coefficient ± 250 ppm/K; ± 100 ppm/K Rated dissipation, P 0.5 W 0.4 W 0.5 W 70 Thermal resistance 170 K/W 200 K/W 150 K/W Operating voltage, U AC/DC 200 V 250 V 350 V max. Operating temperature range -55 °C to 155 °C Permissible film temperature 155 °C Max. resistance change at rated dissipation ± (2 % R + 0.05 ) |R/R max.|, after 1000 h Note • R value is measured with probe distance of 24 mm ± 1 mm using 4-terminal method. Revision: 12-Aug-16 1 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE TOLERANCE TCR RESISTANCE E-SERIES ± 250 ppm/K 1 to  4.7  ± 5 % ± 100 ppm/K 4.7 to 100 k E24 ± 250 ppm/K > 100 k to 3 M SFR16S ± 100 ppm/K 5.6  to 100 k ± 1 % E24; E96 ± 250 ppm/K > 100 k to 976 k Jumper (0  -  30 m; Imax. = 3 A - ± 250 ppm/K 0.22 to 4.7  ± 5 % ± 100 ppm/K > 4.7 to 1 M E24 ± 250 ppm/K > 1 M to 10 M SFR25, SFR25H ± 250 ppm/K 1  to 4.7  ± 1 % ± 100 ppm/K > 4.7 to 1 M E24; E96 ± 250 ppm/K > 1 M to 10 M Jumper (0 ) (1) -  30 m; Imax. = 5 A - Note (1) Jumper is only available for SFR25. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: SFR2500001001FA500 S F R 2 5 0 0 0 0 1 0 0 1 F A 5 0 0 TYPE VARIANT TCR/MATERIAL RESISTANCE TOLERANCE PACKAGING SPECIAL SFR16S0 0 = neutral 0 = standard 3 digit value F = ± 1 % N4 The 2 digits SFR2500 Z = value overflow Z = jumper 1 digit multiplier J = ± 5 % A5 are used for SFR25H0 (special) MULTIPLIER Z = jumper A1 all special 7 = *10-3 2 = *102 R5 parts. 8 = *10-2 3 = *103 00 = standard 9 = *10-1 4 = *104 0 = *100 5 = *105 1 = *101 Z = 0000 PRODUCT DESCRIPTION: SFR25 1 % A5 1K0 SFR25 1 % A5 1K0 TYPE TOLERANCE PACKAGING (1) RESISTANCE VALUE SFR16S ± 1 % N4 47K = 47 k SFR25 ± 5 % A5 51R1 = 51.1  SFR25H A1 R5 Notes • The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER. (1) N4 packaging indicates SFR25 and SFR25H radial version. Revision: 12-Aug-16 2 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents PACKAGING TYPE CODE QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS Taped acc. to IEC 60286-1 A5 5000 75 mm x 73 mm x 270 mm fan-folded in a box Taped acc. to IEC 60286-1 SFR16S R5 5000 52 mm 5 mm 92 mm x 278 mm x 278 mm on a reel Taped acc. to IEC 60286-1 A1 (1) 1000 75 mm x 28 mm x 262 mm fan-folded in a box Taped acc. to IEC 60286-1 A5 5000 75 mm x 98 mm x 270 mm fan-folded in a box Taped acc. to IEC 60286-1 R5 5000 52 mm 5 mm 93 mm x 300 mm x 298 mm on a reel SFR25, SFR25H Taped acc. to IEC 60286-1 A1 (1) 1000 75 mm x 28 mm x 262 mm fan-folded in a box Taped acc. to IEC 60286-2 N4 (2) 4000 - 12.7 mm 45 mm x 262 mm x 330 mm fan-folded in a box Notes (1) A1 packaging only available for resistors with ± 5 % tolerance. (2) N4 packaging only available for SFR25 and SFR25H radial version. MARKING The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC 60062, marking codes for resistors and capacitors. Revision: 12-Aug-16 3 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents FUNCTIONAL PERFORMANCE 100 % n r i e 80 w o P 60 40 20 0 -55 0 50 70 100 125 155 180 Ambient Temperature in °C Derating Maximum dissipation (P ) in percentage of rated power as a function of the ambient temperature (T ) max. amb 90 100 Δ T ΔT (K) (K) SFR25 80 70 60 50 SFR25H 40 30 20 10 0 0.2 0.4 0.6 0 0.1 0.2 0.3 0.4 0.5 P (W) P(W) SFR16S Hot-spot temperature rise (T) as a function SFR25/SFR25H Hot-spot temperature rise (T) as a function of dissipated power of dissipated power Note • The maximum permissible hot-spot temperature is 155 °C. Revision: 12-Aug-16 4 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents 103 P max. (W) 102 tp /t i = 1050000 200 100 10 50 20 10 5 1 2 10-1 10-6 10-5 10-4 10-3 10-2 10-1 ti(s) 1 SFR16S Pulse on a regular basis; maximum permissible peak pulse power (P ) as a function of pulse duration (t) max. i 600 Umax. (V) 500 400 300 200 100 0 10-6 10-5 10-4 10-3 10-2 10-1 t(s) 1 i SFR16S Pulse on a regular basis; maximum permissible peak pulse voltage (U ) as a function of pulse duration (t) max. i 103 P max. (W) 102 tp /t i = 1000 500 200 100 10 50 20 10 5 1 2 10-1 10-6 10-5 10-4 10-3 10-2 10-1 t(s) 1 i SFR25 Pulse on a regular basis; maximum permissible peak pulse power (P ) as a function of pulse duration (t) max. i Revision: 12-Aug-16 5 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents 600 U max. (V) 500 400 300 200 100 0 10-6 10-5 10-4 10-3 10-2 10-1 1 t(s) i SFR25 Pulse on a regular basis; maximum permissible peak pulse voltage (U ) as a function of pulse duration (t) max. i 103 P max. (W) tp /t i = 1000 102 500 200 100 50 10 20 10 5 1 2 10-1 10-6 10-5 10-4 10-3 10-2 10-1 t(s) 1 i SFR25H Pulse on a regular basis; maximum permissible peak pulse power (P ) as a function of pulse duration (t) max. i 1200 h U max. (V) 800 400 0 10-6 10-5 10-4 10-3 10-2 10-1 t(s) 1 i SFR25H Pulse on a regular basis; maximum permissible peak pulse voltage (U ) as a function of pulse duration (t) max. i Revision: 12-Aug-16 6 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents TESTS PROCEDURES AND REQUIREMENTS All tests are carried out in accordance with the following Unless otherwise specified the following values apply: specifications: • Temperature: 15 °C to 35 °C • EN 60115-1, generic specification (includes tests) • Relative humidity: 45 % to 75 % The test and requirements table contains only the most • Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). important tests. For the full test schedule refer to the For performing some of the tests, the components are documents listed above. mounted on a test board in accordance with IEC 60115-1, The tests are carried out in accordance with IEC 60068-2-xx 4.31. In test procedures and requirements table, only the test method and under standard atmospheric conditions in tests and requirements are listed with reference to the accordance with IEC 60068-1, 5.3. relevant clauses of IEC 60115-1 and IEC 60068-2-xx test  methods. A short description of the test procedure is also  given. TEST PROCEDURES AND REQUIREMENTS IEC IEC 60068-2 60115-1 TEST TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (Rmax.) CLAUSE METHOD 4.5 - Resistance - ± 5 %; ± 1 % Temperature At (20 / -55 / 20) °C 4.8 - ± 250 ppm/K; ± 100 ppm/K coefficient and (20 / 155 / 20) °C 68 k to > 100 k to < 68 k > 1 M 100 k 1 M 4.12 - Noise IEC 60195 SFR16S ≤ 0.1 μV/V ≤ 0.5 μV/V ≤ 1.5 μV/V ≤ 1.5 μV/V SFR25, ≤ 0.1 μV/V ≤ 0.1 μV/V ≤ 0.1 μV/V ≤ 1.5 μV/V SFR25H Room temperature; Short time P = 6.25 x P ; 4.13 - n ± (0.25 % R + 0.05 ) overload (voltage not more than 2 x limiting voltage); 5 s 21 (Ua1) Robustness of 4.16 21 (Ub) Tensile, bending, and torsion ± (0.25 % R + 0.05 ) terminations 21 (Uc) at +235 °C; 2 s; solder bath method; SnPb40 4.17 20 (Ta) Solderability Good tinning (≥ 95 % covered); no damage at +245 °C; 3 s; solder bath method; SnAg3Cu0.5 Resistance to Unmounted components 4.18 20 (Tb) ± (0.25 % R + 0.05 ) soldering heat (260 ± 5) °C; (10 ± 1) s 30 min at -55 °C and Rapid change of 4.19 14 (Na) 30 min at +155 °C; ± (0.25 % R + 0.05 ) temperature 5 cycles 3 x 1500 bumps in 3 directions; 4.20 29 (Eb) Bump ± (0.25 % R + 0.05 ); no damage 40 g 10 sweep cycles per direction; 4.22 6 (Fc) Vibration 10 Hz to 2000 Hz ± (0.25 % R + 0.05 ); no damage 1.5 mm or 200 m/s2 Climatic 4.23 sequence: 4.23.2 2 (Ba) Dry heat 155 °C; 16 h Damp heat, 55 °C; 24 h; 4.23.3 30 (Db) cyclic 90 % to 100 % RH; 1 cycle 4.23.4 1 (Aa) Cold -55 °C; 2 h 4.23.5 13 (M) Low air pressure 8.5 kPa; 2 h; 15 °C to 35 °C Damp heat, 55 °C; 5 days; SFR16S, ± (1 % R + 0.05 ); no visible damage 4.23.6 30 (Db) cyclic 95 % to 100 % RH; 5 cycles SFR25, ± (1 % R + 0.05 ); no visible damage 4.23.7 DC load apply rated power for 1 min SFR25H ± 2 % R; no visible damage Revision: 12-Aug-16 7 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents TEST PROCEDURES AND REQUIREMENTS IEC IEC 60068-2 60115-1 TEST TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (Rmax.) CLAUSE METHOD Damp heat (40 ± 2) °C; 56 days; 4.24 78 (Cab) ± (2 % R + 0.05) (steady state) (93 ± 3) % RH Endurance U = P70 x R or U = Umax.; 4.25.1 1.5 h on; 0.5 h off ± (2 % R + 0.05 ) (at 70 °C) 70 °C; 1000 h DIMENSIONS L 1 Ø d Ø D L Outline 2 DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions Ø D L L Ø d MASS TYPE max. 1 max. 2 max. (mm) (mm) (mm) (mm) (mg) SFR16S 1.9 3.5 4.1 0.45 ±0.05 102 SFR25 2.5 6.5 7.5 0.58 ±0.05 205 SFR25H 2.5 6.5 7.5 0.58 ±0.05 205 SFR25, SFR25H WITH RADIAL TAPING DIMENSIONS in millimeters P2 P Pitch of components P 12.7 ± 1.0 Feed-hole pitch P 12.7 ± 0.2 0 Feed-hole center to lead at topside at P 3.85 ± 0.5 the tape 1 H1 Feed-hole center to body center P2 6.35 ± 1.0 H Lead-to-lead distance F 4.8 + 0.7 / - 0 H0LL1 W Tape width W 18.0 ± 0.5 0 Minimum hold down tape width W 5.5 0 W Maximum component height H1 29 Lead wire clinch height H 16.5 ± 0.5 0 Height of component from tape center H 19.5 ± 1 α α F P0 P1 D0 Feed-hole diameter D0 4.0 ± 0.2 Maximum length of snipped lead L 11.0 α = 30° to 40° Minimum lead wire (tape portion) L 2.5 shortest lead 1 a a Note • Please refer to document “Packaging” for more detail (www.vishay.com/doc?28721). Revision: 12-Aug-16 8 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents HISTORICAL 12NC INFORMATION Resistance Decade for ± 1 % Tolerance • The resistors had a 12-digit numeric code starting with 23. RESISTANCE DECADE LAST DIGIT • The subsequent 6 digits for 1 % or 7 digits for 5 % 1  to 9.76  8 indicated the resistor type and packaging. 10  to 97.6  9 • The remaining digits indicated the resistance value: 100  to 976  1 - The first 3 digits for 1 % or 2 digits for 5 % indicated the 1 k to 9.76 k 2 resistance value. 10 k to 97.6 k 3 - The last digit indicated the resistance decade. 100 k to 976 k 4 1 M to 9.76 M 5 Resistance Decade for ± 5 % Tolerance = 10 M 6 RESISTANCE DECADE LAST DIGIT 12NC Example 0.10  to 0.91  7 The 12NC of a SFR25 resistor, value 5600  ± 5 %, taped 1  to 9.1  8 on a bandolier of 5000 units in ammopack was: 10  o 91  9 2322 181 43562. 100  to 910  1 1 k to 9.1 k 2 10 k to 91 k 3 100 k to 910 k 4 1 M to 9.1 M 5 = 10 M 6 HISTORICAL 12NC - Resistor type and packaging 23.. ... ..... BANDOLIER IN AMMOPACK BANDOLIER ON REEL TYPE TOL. RADIAL TAPED STRAIGHT LEADS STRAIGHT LEADS 4000 UNITS 1000 UNITS 5000 UNITS 5000 UNITS ± 5 % - ..22 187 73... ..22 187 53... ..06 187 23... SFR16S ± 1 % - - ..06 187 3... ..06 187 1.... Jumper - - ..06 187 90013 ..22 187 90346 ± 5 % ..06 184 03... ..22 181 53... ..22 181 43... ..22 181 63... SFR25 ± 1 % - - ..22 188 2... ..06 181 8.... Jumper - ..22 181 90018 ..22 181 90019 ..06 181 90011 ± 5 % ..06 186 03... ..22 186 16... ..22 186 76... ..06 186 63... SFR25H ± 1 % - - ..22 186 3.... ..06 186 8.... Revision: 12-Aug-16 9 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000