DATA SHEET SE2435L: 860 to 930 MHz High-Power RF Front-End Module Applications  Internet of Things L T E U S  Smart meters O N _  In-home appliances PA_ TX_I CPSCTXCSDANT  Smart thermostats Logic  Industrial applications Control PA_IN PA Features Tx_FLT ANT1  Integrated PA with +30 dBm output power TR  Integrated LNA with programmable bypass ANT2  Integrated antenna switching with transmit/receive diversity LNA function  Low FEM noise figure of 2 dB, typical  Single-ended 50  transmit/receive RF interface 202412-001  Fast turn-on/turn-off time: < 1 μsec A_IN _FLT  Supply voltage: 2.0 to 4.8 V N x L R  Sleep mode current: < 1 μA Figure 1. SE2435L Block Diagram  QFN (24-pin, 4 x 4 x 0.9 mm ) NiPdAu plated package (MSL1, 260 C per JEDEC J-STD-020) Description Skyworks GreenTM products are compliant with The SE2435L is a high-performance, highly integrated RF all applicable legislation and are halogen-free. front-end module designed for high-power Industrial, Scientific, For additional information, refer to Skyworks Medical (ISM) band applications operating in the 860 to 930 MHz Definition of GreenTM, document number frequency range. SQ04–0074. The SE2435L is designed for ease of use and maximum flexibility T with fully matched 50  TX and RX inputs and antenna outputs, U 1 0 2 O VCC VCC N/C VCC PA_ N/C and digital controls compatible with 1.6 to 3.6 V CMOS levels. 24 23 22 21 20 19 The RF blocks operate over a wide supply voltage range from 2.0 to 4.8 V allowing the SE2435L to be used in battery powered CSD 1 18 N/C applications over a wide spectrum of the battery discharge curve. PA_IN 2 17 N/C The SE2435L is packaged in a 24-pin, 4 x 4 mm Quad Flat No- CPS 3 16 TX_IN Lead (QFN) package. CTX 4 15 N/C A functional block diagram of the SE2435L is provided in Figure 1. TX_FLT 5 14 ANT1 Figure 2 shows the pinout for the SE2435L. Table 1 lists the pin assignments and signal descriptions. TR 6 13 N/C 0 1 2 7 8 9 1 1 1 L D N C T 2 Y0083 NT_SE GN LNA_I N/ RX_FL ANT A Figure 2. SE2435L Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202412I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 14, 2016 1

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Table 1. SE2435L Signal Descriptions Pin Name Description Pin Name Description 1 CSD Shutdown control input 14 ANT1 Antenna port 1 2 PA_IN PA input (from Tx filter) 15 N/C Not connected internally to the device 3 CPS Rx path select control input 16 TX_IN Tx signal to antennas (from OMN) 4 CTX Transmit enable control input 17 N/C Not connected internally to the device 5 TX_FLT Transmit signal (to Tx filter) 18 N/C Not connected internally to the device 6 TR Bi-directional RF signal to/from transceiver 19 N/C Not connected internally to the device 7 ANT_SEL Antenna select control input 20 PA_OUT PA output (to Z optimum)1 8 GND Ground 21 VCC2 Positive power supply 9 LNA_IN LNA input (from Rx filter) 22 N/C Not connected internally to the device 10 N/C Not connected internally to the device 23 VCC0 Positive power supply 11 RX_FLT Rx signal from antennas (to Rx filter) 24 VCC1 Positive power supply 12 ANT2 Antenna port 2 Exposed die paddle; electrical and thermal Paddle GND 13 N/C Not connected internally to the device ground. Connect to PCB ground 1 Z optimum = 5 Ω for +30 dBm or 8 Ω for +27 dBm POUT. Electrical and Mechanical Specifications Table 2 provides the absolute maximum ratings, and Table 3 Electrical specifications are provided in Tables 4 through 9. shows the recommended operating conditions. Typical performance characteristics are shown in Figures 3 through 8. Table 2. SE2435L Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units Supply voltage (no RF) VCC –0.3 5.5 V Operating temperature TA –40 85 °C Storage temperature TSTG –40 125 °C Tx input power at TR port PIN_TX_MAX +10 dBm Rx input power at ANT1 or ANT2 ports PIN_RX_MAX +10 dBm Electrostatic discharge: ESD Human Body Model (HBM), Class 1C 1000 V 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 October 14, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412I

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Table 3. SE2435L Recommended Operating Conditions Parameter Symbol Minimum Typical Maximum Units Supply voltage on VCC VCC 2.0 4.0 4.8 V Ambient temperature TA –40 +25 +85 °C Table 4. SE2435L DC Electrical Specifications1 (VCC = 4.0 V, f = 915 MHz, TA = +25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Total supply current, transmit mode ICC_TX30 POUT = +30 dBm 550 mA ICC_TX27 POUT = +27 dBm 380 mA ICC_TX24 POUT = +24 dBm 275 mA Total supply current, receive mode ICC_RX 6 mA Total supply current, receive bypass mode ICC_RXB 280 μA Quiescent current ICQ_TX No RF 50 mA Sleep supply current ICC_OFF No RF 0.05 1.00 μA 1 Performance is guaranteed only under the conditions listed in this table. Table 5. SE2435L Electrical Specifications: Control Logic Characteristics1 (TA = +25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Control voltage: High VIH 1.6 Vcc (Note 2) V Low VIL 0 0.3 V Input current: High IIH 1 μA Low IIL 1 μA 1 Performance is guaranteed only under the conditions listed in this table. 2 For Pin 7, ANT_SEL, the maximum is 3.6 V. Table 6. SE2435L Electrical Specifications: Mode Control Logic (TA = +25) Mode CPS CSD CTX ANT_SEL Sleep (all off) 0 0 0 X Receive or transmit bypass 0 1 0 X Receive LNA mode 1 1 0 X Transmit X 1 1 X ANT1 port enabled X X X 0 ANT2 port enabled X X X 1 1 “1” = 1.6 to Vcc, “0” = 0 to 0.3 V, “X” = don’t care. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202412I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 14, 2016 3

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Table 7. SE2435L Electrical Specifications: AC Transmit Mode (VCC = 4 V, TA = +25 C, All Unused Ports Terminated at 50 , Unless Otherwise Noted. Input Port TR, Output Ports ANT1 and ANT2 Lumped Elements Filter Connected between the TX_FLT and PA_IN Pins) Parameter Symbol Test Condition Min Typical Max Units Frequency range f 860 930 MHz Output power at ANT1 or ANT2 ports in the POUT_915 VCC = 4.8 V +31.5 dBm 900 to 930 MHz frequency range1 VCC = 4.0 V +30.5 dBm VCC = 3.6 V +29.5 dBm VCC = 3.0 V +28.0 dBm Output power at ANT1 or ANT2 ports in the POUT_860 VCC = 4.0 V +27 dBm 860 to 870 MHz frequency range2 VCC = 3.6 V +24 dBm VCC = 3.0 V +21 dBm VCC = 2.0 V +18 dBm PA power added efficiency PAE_PA POUT = +28 dBm at PA_OUT port, 915 MHz 64 % Small signal gain1 S21_915 900 to 930 MHz 26 dB Small signal gain2 S21_860 860 to 870 MHz 26 dB Small signal gain variation1, 2 S21 Gain variation across frequency range 2 dBp-p Output return loss1, 2 S22ANT1,2 Into 50 , ANT1 and ANT2 ports –10 –6 dB 2nd harmonic1, 3 2fo POUT = +30 dBm –22 dBc 3rd to 10th harmonic1, 3 3fo to 10fo POUT = +30 dBm –72 dBc Turn-on time4 tON 1 μs Turn-off time tOFF 1 μs Stability STAB CW, PIN = 0 dBm 0.1 GHz to 20 GHz All non-harmonically related outputs less than –43 dBm load VSWR = 6:1 Ruggedness RU CW, POUT = +30 dBm into No permanent damage 50 Ω, load VSWR = 10:1 1 900 to 930 MHz with specified matching network on the Evaluation Board. 2 860 to 870 MHz with specified matching network on the Evaluation Board. 3 Measured with continuous wave signal. 4 From 50% of CTX edge to 90% of final RF output power. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 October 14, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412I

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Table 8. SE2435L Electrical Specifications: AC Receive Mode (VCC = 4 V, TA = +25 C, f = 900 to 930 MHz and 860 to 870 MHz, All Unused Ports Terminated at 50 Ω, Unless Otherwise Noted. Input Port ANT1 or ANT2, Output Port TR. 0 Ω Connected between the RX_FLT and LNA_IN Pins in lieu of External Filters) Parameter Symbol Test Condition Min Typical Max Units Frequency range fIN 860 930 MHz Receive gain RX_GAIN 14 16 18 dB Receive noise figure NF 2 2.5 dB Input third order intercept IIP3 –5 –2 dBm Input 1-dB compression point IP1dB –15 –12 dBm Into 50 , ANT1 and Antenna port return loss S11ANT1,2 ANT2 ports –12 –8 dB Turn-on time1 tON 1 μs Turn-off time2 tOFF 1 μs Gain in bypass mode G_bp –3 –2 dB Input 1-dB compression point in bypass mode IP1dB +10 dBm 1 From 50% of CTX edge to 90% of final RF output power. 2 From 50% of CTX edge to 10% of final RF output power. Table 9. SE2435L DC Electrical Specifications: Diversity Antenna Function (VCC = 4 V, TA = +25 C, f = 900 to 930 MHz and 860 to 870 MHz, All Unused Ports Terminated at 50 , Unless Otherwise Noted) Parameter Symbol Min Typical Max Units Isolation between ANT1 and ANT2 ports ISOLANTSW –20 dB Insertion loss from TX_IN to ANT1 TX_ANT1 0.8 dB Insertion loss from TX_IN to ANT2 TX_ANT2 0.8 dB Insertion loss from ANT1 to RX_FLT RX_ANT1 0.6 dB Insertion loss from ANT2 to RX_FLT RX_ANT2 0.6 dB Insertion loss from TR to TX_FLT TxRx_Tx 0.5 dB ANT1 to ANT2 switching time transmit mode TANT1-ANT1_TX 800 ns ANT1 to ANT2 switching time receive mode TANT1-ANT2_RX 400 ns Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202412I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 14, 2016 5

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Typical Performance Characteristics (Note 1) (VCC = 4 V, TA = +25 C, f = 900 to 930 MHz, All Unused Ports Terminated at 50 , Unless Otherwise Noted) –20 +35 650 –30 900 MHz 915 MHz +30 550 –40 930 MHz –50 +25 450 Level (dBc) –––876000 (dBm)OUT +20 350 ICC (mA) P +15 250 –90 –––111210000 202412-003 ++150 PICoCu t[ m[dAB]m] 15050 #2 #3 #4 #5 #6 #7 #8 #9 #10 –22 –20 –18 –16 –14 –12 –10 –8 –6 –4 –2 0 +2 +4 +6 # Harmonics Input Power (dBm) 202412-004 Figure 3. Typical Harmonics Level at +30 dBm POUT Figure 4. Typical POUT and ICC Transfer Characteristics (including Antenna Filter) 34 650 32 550 30 450 B) 28 mA) Gain (d 26 ICC ( 350 250 24 900 MHz 900 MHz 2202 991350 MMHHzz 202412-005 15500 993105 MMHHzz 202412-006 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 Output Power (dBm) Output Power (dBm) Figure 5. Typical Gain vs POUT Figure 6. Typical ICC vs POUT (VCC = 4 V) (VCC = 4 V) 34 55 2.0 V 32 3.3 V 50 3.6 V 30 4.0 V 4.8 V B) 28 %) 45 n (d 26 2.0 V AE ( Gai 3.3 V P 40 24 3.6 V 2202 44..08 VV 202412-007 3305 202412-008 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 +34 +20 +21 +22 +23 +24 +25 +26 +27 +28 +29 +30 +31 +32 +33 +34 Output Power (dBm) Output Power (dBm) Figure 7. Typical Gain vs POUT Figure 8. Typical PAE vs POUT & VCC, CW (VCC = 2.0 to 4.8 V) (VCC = 2.0 to 4.8 V) (including OMN and Antenna Filter Losses) Note: Typical performance graphs at 868 MHz are available upon request (+24, +27, and +30 dBm POUT). Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 October 14, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412I

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Evaluation Board Description The SE2435L-EK1 Evaluation is to demonstrate the performance Figure 9 shows the Evaluation Board. The Evaluation Board of the SE2435L Front-End Module. It is optimized for evaluation, schematic diagram is provided in Figure 10. The Bill of Materials experimentation and investigation, using CW (continuous wave) (BOM) for the SE2435L Evaluation Board is listed in Table 10. signals. Figure 9. SE2435L Evaluation Board Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202412I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 14, 2016 7

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE J4 VCC 2 1 VDD 4 3 C6 4.7 µF 6 5 C1 CTX 8 7 10 nF C11 C8 1 nF 33 pF 10 9 CPS 12 11 14 13 L3 3.3 nLH4 4.7 nH CSD 16 15 L5 18 17 6.8 nH C2 L2 C3 ANT_SEL 20 19 1.3 nH 8.2pF 22 pF C10 × × 100 pF 25 24 23 22 21 20 19 PAD VCC1 VCC0 N/C VCC2 _OUT N/C L1 1C.81 7pF CSD 1 PA 18 × 3.0 nH CSD N/C 2 17 × PA_IN N/C 3.3 pRF1 CCTPXS 34 CCTPXS SE2U4135L TXN_/INC 1165 × L8 3.C39 pF L6 6.8 nH 6.8 nH J3 5 TX_FLT ANT1 14 SMA J1 6 TR L N/C 13 × C12 SMA _SE _IN FLT 2 3.3 pF ANT GND LNA N/C RX_ ANT 7 8 9 10 11 12 × L9 L7 6.8 nH 6.8 nH ANT_SEL J2 SMA C13 3.3 pF Note: Discard N/C pins that are connected to ground on the Evaluation Board. 202412-010 Figure 10. Evaluation Board Schematic for 915 MHz Application and FCC Conducted Harmonics Rejection Compliant Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 October 14, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412I

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Table 10. SE2435L Evaluation Board Bill of Materials1 Component Part Number Description Value Package Manufacturer L2 LQG15HN1N3S02D High frequency multilayer 1.3 nH 0402 Murata C17 GRM1555C1H1R8CZ01 Multilayer ceramic 1.8 pF 0402 Murata C11 GRM155R71H102KA01 Multilayer ceramic 1 nF 0402 Murata L1 LQG15HN3N0S02D High frequency multilayer 3.0 nH 0402 Murata L4 LQG15HN3N3S02D High frequency multilayer 3.3 nH 0402 Murata L3 LQG15HN4N7S02D High frequency multilayer 4.7 F 0402 Murata C6 GRM188R60J475KE19 Multilayer ceramic 4.7 F 0603 Murata C3 GRM1555C1H8R2DZ01 Multilayer ceramic 8.2 pF 0402 Murata C1 GRM155R71E103KA01 Multilayer ceramic 10 nF 0402 Murata J4 TSW-110-07-G-D 100 mil Header 10X2 100 mil Samtec C2 GRM1555C1H220JZ01 Multilayer ceramic 22 pF 0402 Murata C8 GRM1555C1H330JZ01 Multilayer ceramic 33 pF 0402 Murata C10 GRM1555C1H101JZ01 Multilayer ceramic 100 pF 0402 Murata U1 SE2435L 860 to 930 MHz high power RF FEM SE2435L QFN400x400 Skyworks J1, J2, J3 142-0701-851 SMA end launch straight jack receptacle – tab contact SMA End launch Johnson Components C9, C12, C13, R1 GRM1555C1H3R3CZ01 Multilayer ceramic 3.3 pF 0402 Murata L5, L6 ,L7, L8, L9 LQG18HN6N8S00D High frequency multilayer 6.8 nH 0603 Murata 1 Schematic and BOM has been designed to optimize performance with CW signals, 100% duty cycle. Evaluation Board Setup Procedure Measure Performance This section provides the details required to setup the evaluation board and the test equipment for the SE2435L. Table 11  TX: The 860 to 930 MHz (depending on the region) amplifier describes the pins on the Power and Control I/O Header J4. Note performance can be monitored by applying an RF signal to that it is recommended to use proper engineering connection connector J1 (TR), and monitoring the output power on practices by making RF and digital connections prior to turning on connector J2 (ANT2) or J3 (ANT1). the power supply.  RX: The 860 to 930 MHz LNA performance can be monitored by Connect Supply applying an RF signal to connector J2 (ANT2) or J3 (ANT1), and monitoring the output signal on connector J1 (TR). 1. Connect (J1, J2, and J3) to 50  instruments. Terminate all unused ports (if applicable) with 50 . CAUTION Be careful not to overdrive the amplifier by applying 2. Connect the supply ground to Pin 1 of J4. too much RF on the input to the device. A starting 3. Connect 3.6 V or 4.0 V to Pin 2 of J4: input power of –20 dBm is suitable. The required RF path/antenna can be selected using the information in Table 6. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202412I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 14, 2016 9

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Table 11. Power and Control I/O Header (J4) Evaluation Board Label Pin Number Description Recommended setting GND 1,3,5,7,9,11,13,15,17,19 Ground General purpose grounds VCC 2,4,6,10,14,18 Supply voltage General purpose VCC provided as the main power supply. CTX 8 Control CPS 12 Control See Table 6. CSD 16 Control ANTSEL 20 Control Package Dimensions Package and Handling Information The layout footprint for the SE2435L is provided in Figure 11. Instructions on the shipping container label regarding exposure to Typical part markings are shown in Figure 12. Package moisture after the container seal is broken must be followed. dimensions for the SE2435L are shown in Figure 13, and tape and Otherwise, problems related to moisture absorption may occur reel dimensions are provided in Figure 14. when the part is subjected to high temperature during solder assembly. The SE2435L is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 10 October 14, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412I

DATA SHEET • SE2435L: 860 TO 930 MHZ HIGH-POWER RF FRONT-END MODULE 4.40 2 1 1 2 2.70 1.0 0.5 0.0 0.5 1.0 X X X X X 5 5 5 5 5 5X 1.02 5X 0.51 2.70 5X 0.0 0 4.40 5X 0.51 5X 1.02 0.60 Typ 0 25X Ø0.254 0.25 Typ 0.500 Typ Board Metal Via Pattern (Note 4) 4.50 4.40 2.50 1.00 Typ 0.20 Typ 1.00 Typ 4.40 2.50 0.20 Typ 4.50 0.70 Typ 0.60 Typ 4 x 4 QFN Package 0.35 Typ 0.500 Typ Outline 0.25 Typ 0.500 Typ Solder Mask Pattern Stencil Pattern (Note 5) (Note 6) 64% Solder Coverage Notes: on Center Pad 1. All dimensions are in millimeters. 2. Interpret dimensions and tolerances per ASME Y14.5M-1994. 3. Unless specified, dimensions are symmetrical about center lines. 4. Via hole recommendations: 0.025 mm Cu via wall plating (minimum), solder mask on the far side should tent or plug via holes. 5. Stencil recommendations: 0.125 mm stencil thickness, laser cut apertures, trapezoidal walls and rounded 202412-011 corners offer the best paste release. 6. Solder mask recommendations: Contact board fabricator for recommended solder mask offset and tolerance. Figure 11. SE2435L Recommended Footprint (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 11 November 11, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412G

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Pin 1 e4 Indicator SiGe 2435L Part Number XXXX Lot Code 202412-012 Figure 12. Typical Part Markings (Top View) 4.00 ±0.05 A 0.05 C 0.85 ±0.05 2.70 ±0.05 0.203 Ref B 0.30 X 45° 0.000-0.005 Pin 1 Pin 1 Indicator Indicator Exposed Pad 4.00 ±0.05 2.70 ±0.05 0.500 R0.075 Typ 24X 0.20 Min 2X 0.05 C 25X 0.08 C See Detail A See Detail B 2X 0.05 C C 4 Top View Side View Bottom View Seating Plane NOTES: 0.093 ±0.05 1. All measurements are in millimeters, unless otherwise specified. 2X R0.075 R0.075 2. Dimensions and tolerances according to ASME Y14.5M-2009. 3 . U nless oDtheecrimwaisle T oslpeercainficeed: the f ollowing vaAlunegsu laapr pTolyl:erance: 0.40 ±0.05 DSecatlaei 2l XA DSecatlaei l2 XB 0.307 ±0.05 0.40 ±0.05 X.X (1 place) ± 0.1 mm ±0.5° (16 Places) (8 Places) X.XX (2 places) ± 0.05 mm X.XXX (3 places) ± 0.025 mm 0.25 ±0.05 0.25 ±0.05 0.10 C A B 0.10 C A B 4. Coplanarity applies to the exposed center ground pad as well as the terminals. 5 0.05 C 5 0.05 C 5. Dimension applies to the metallized terminal. If the terminal has a radius, the dimension should not be measured in that radius area. 6. Plating requirements per source control drawing (SCD) 2504. 7. Unless specified, dimensions are symmetrical about center lines. 202412-013 Figure 13. SE2435L Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 12 October 14, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412I

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE 8.0 ±0.1 D 1.50 +0.10 1.75 ±0.1 4.0 Note 1 2.0 ±0.05 0 .2 5 4 ±0 5.5 ±0.05 .0 12.0 ±0.3 13 4.35 ±0.1 1 .2 2 ± 0 .1 4.35 ±0.1 Pin 1 Indicator Notes: 1. All dimensions are in millimeters. 202412-014 2. Ten-sprocket hole pitch cumulative tolerance ±0.2 mm. 3. Camber in compliance with EIA-481. Figure 14. SE2435L Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202412I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 14, 2016 13

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SE2435L: FCC +30 dBm 900 to 930 MHz Front-End Module SE2435L SE2435L-EK1 SE2435L: ETSI +27 dBm 868 to 880 MHz Front-End Module SE2435L SE2435L–EK2 SE2435L: ETSI + FCC +30 dBm 868 to 930 MHz Front-End Module SE2435L SE2435L–EK5 SE2435L: FCC +25 dBm 915 MHz Front-End Module SE2435L SE2435L–EK7 Model Name Reference Design Board Number FCC +26 dBm SigFox SE2435L + TI CC112x Reference Design SE2435L-EK3 FCC +30 dBm LoRa SE2435L + Semtech SX1272 Reference Design SE2435L-EK6 Note: The output power referred to here is PSAT. Copyright © 2013-2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 14 October 14, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202412I

DATA SHEET • SE2435L: 860 TO 930 MHz HIGH-POWER RF FRONT-END MODULE Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202412I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 14, 2016 15