SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability DO-15 (DO-204AC) • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Material categorization: for definitions of compliance PRIMARY CHARACTERISTICS please see www.vishay.com/doc?99912 V 5.0 V to 170 V WM TYPICAL APPLICATIONS V (uni-directional) 6.4 V to 209 V BR V (bi-directional) 6.4 V to 209 V Use in sensitive electronics protection against voltage BR transients induced by inductive load switching and lighting P 500 W PPM on ICs, MOSFET, signal lines of sensor units for consumer, PD 3.0 W computer, industrial, and telecommunication. I (uni-directional only) 70 A FSM T max. 175 °C MECHANICAL DATA J Polarity Uni-directional, bi-directional Case: DO-15 (DO-204AC)  Molded epoxy over passivated chip  Package DO-15 (DO-204AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: matte tin plated leads, solderable per DEVICES FOR BI-DIRECTION APPLICATIONS J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix For bi-directional types, use CA suffix (e.g. SA5.0CA, meets JESD 201 class 2 whisker test SA170CA).  Electrical characteristics apply in both directions. Polarity: for uni-directional types the color band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) P 500 W PPM Peak pulse current with a 10/1000 μs waveform (1) I See next table A PPM Power dissipation on infinite heatsink at T = 75 °C (fig. 5) P 3.0 W L D Peak forward surge current 10 ms single half sine-wave uni-directional only I 70 A FSM Maximum instantaneous forward voltage at 100 A for uni-directional only (3) V 3.5 V F Operating junction and storage temperature range T , T -55 to +175 °C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Revision: 16-Jan-18 1 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF PEAK REVERSE CLAMPING TEMPERATURE V AT I (1) CURRENT VOLTAGE PULSE DEVICE TYPE BR T LEAKAGE VOLTAGE COEFFICIENT (V) I V CURRENT T WM AT V (3) AT I AT V (mA) (V) WM I (2) PPM BR MIN. MAX. ID (μA) PP(AM) VC (V) (mV/°C) SA5.0A (4) 6.40 7.07 10 5.0 600 54.3 9.2 5 SA6.0A 6.67 7.37 10 6.0 600 48.5 10.3 5 SA6.5A 7.22 7.98 10 6.5 400 44.7 11.2 5 SA7.0A 7.78 8.60 10 7.0 150 41.7 12.0 6 SA7.5A 8.33 9.21 1.0 7.5 50 38.8 12.9 7 SA8.0A 8.89 9.83 1.0 8.0 25 36.8 13.6 7 SA8.5A 9.44 10.4 1.0 8.5 10 34.7 14.4 8 SA9.0A 10.0 11.1 1.0 9.0 5.0 32.5 15.4 9 SA10A 11.1 12.3 1.0 10 1.0 29.4 17.0 10 SA11A 12.2 13.5 1.0 11 1.0 27.5 18.2 11 SA12A 13.3 14.7 1.0 12 1.0 25.1 19.9 12 SA13A 14.4 15.9 1.0 13 1.0 23.3 21.5 13 SA14A 15.6 17.2 1.0 14 1.0 21.6 23.2 14 SA15A 16.7 18.5 1.0 15 1.0 20.5 24.4 16 SA16A 17.8 19.7 1.0 16 1.0 19.2 26.0 17 SA17A 18.9 20.9 1.0 17 1.0 18.1 27.6 19 SA18A 20.0 22.1 1.0 18 1.0 17.1 29.2 20 SA20A 22.2 24.5 1.0 20 1.0 15.4 32.4 23 SA22A 24.4 26.9 1.0 22 1.0 14.1 35.5 25 SA24A 26.7 29.5 1.0 24 1.0 12.9 38.9 28 SA26A 28.9 31.9 1.0 26 1.0 11.9 42.1 30 SA28A 31.1 34.4 1.0 28 1.0 11 45.4 31 SA30A 33.3 36.8 1.0 30 1.0 10 48.4 36 SA33A 36.7 40.6 1.0 33 1.0 9.4 53.3 39 SA36A 40.0 44.2 1.0 36 1.0 8.6 58.1 41 SA40A 44.4 49.1 1.0 40 1.0 7.8 64.5 46 SA43A 47.8 52.8 1.0 43 1.0 7.2 69.4 50 SA45A 50.0 55.3 1.0 45 1.0 6.9 72.7 52 SA48A 53.3 58.9 1.0 48 1.0 6.5 77.4 56 SA51A 56.7 62.7 1.0 51 1.0 6.1 82.4 61 SA54A 60.0 66.3 1.0 54 1.0 5.7 87.1 65 SA58A 64.4 71.2 1.0 58 1.0 5.3 93.6 70 SA60A 66.7 73.7 1.0 60 1.0 5.2 96.8 71 SA64A 71.1 78.6 1.0 64 1.0 4.9 103 76 SA70A 77.8 86.0 1.0 70 1.0 4.4 113 85 SA75A 83.3 92.1 1.0 75 1.0 4.1 121 91 SA78A 86.7 95.8 1.0 78 1.0 4 126 95 SA85A 94.4 104 1.0 85 1.0 3.6 137 103 SA90A 100 111 1.0 90 1.0 3.4 146 110 SA100A 111 123 1.0 100 1.0 3.1 162 123 SA110A 122 135 1.0 110 1.0 2.8 177 133 SA120A 133 147 1.0 120 1.0 2.6 193 146 SA130A 144 159 1.0 130 1.0 2.4 209 158 SA150A 167 185 1.0 150 1.0 2.1 243 184 SA160A 178 197 1.0 160 1.0 1.9 259 196 SA170A 189 209 1.0 170 1.0 1.8 275 208 Notes (1) Pulse test: tp  50 ms (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bi-directional types with V of 10 V and less the I limit is doubled WM D (4) For the bi-directional SA5.0CA, the maximum V is 7.25 V BR (5) All terms and symbols are consistent with ANSI/EEE CA62.35 Revision: 16-Jan-18 2 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED PIN UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SA5.0A-E3/54 0.432 54 4000 13" diameter paper tape and reel SA5.0AHE3/54 (1) 0.432 54 4000 13" diameter paper tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (T = 25 °C unless otherwise noted) A 150 30 Non-Repetitive Pulse TJ = 25 °C W) WTa =ve 2fo5r °mC shown in Fig. 3 MSR tr = 10 µs Pisu dlseefi nWeidd tahs ( tthd)e Point ower (k 10 A I % ,tne 100 HaPIlPfe PVaMaklu Vea l-ueI wdehcearyes t htoe 5P0e a%k oCfu IrPrPeMnt ak Pulse P 1.0 ”P0P.K5” td ExImpDopenucelasnyetial rruC esluP IPPM P2P PPe - PPM CPPuPPrKKrentWttaddvefoHStradqm l=ufs aS7r ietnpe kaeP - IMPP 50 td 1a0s /d1e0f0in0e µds b Wy aRv.eEf.oAr.m 0.1 0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 2.0 3.0 4.0 td - Pulse Width t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 100 200 ulse Power (P) or Current (I)PPPPDerating in Percentage, % 752505 Peak Forward Surge Current (A) 100 8.3 ms Single Half Sine-Wave Peak P I - FSM 0 10 0 25 50 75 100 125 150 175 200 1 10 100 TJ - Initial Temperature (°C) Number of Cycles at 60 Hz Fig. 4 - Maximum Non-Repetitive Forward Surge Current Fig. 2 - Pulse Derating Curve Uni-Directional Only Revision: 16-Jan-18 3 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor 4.0 100 60 Hz Waveform: Resistive or ge SA170 10 x 1000 Impulse a n (W) 3.0 Inductive Load g Volt SA110S A70D VC = VC - VBR patio mpin 10 SA40S A24 er Dissi 2.0 ntal Cla SA15 ow L = 0.375" (9.5 mm) me 1.0 SA9.0 - PD 1.0 Lead Lengths ncre SA5.0 P - IC V 0 0.1 0 25 50 75 100 125 150 175 200 0.5 1 10 50 TL - Lead Temperature (°C) IPP - Peak Pulse Current (A) Fig. 5 - Steady State Power Derating Curve Fig. 8 - Incremental Clamping Voltage Curve Uni-Directional 10 000 100 Waveform: SA170 Uni-Directional e 8 x 20 Impulse SA110 Bi-Directional oltag DVC = VC - VBR SA70 atnce (pF)1000 VR = 0 TfV =Js i g=1 =.20 55 M 0° CHmzVp-p Clamping V 10 SSSSAAAA34620004 aci al SA15 CCap - J 100 VR = Rated crement 1.0 SSAA96..05 Stand-Off voltage n - IC V 10 0.1 5 100 500 0.5 1 10 50 VWM - Reverse Stand-Off Voltage (V) IPP - Peak Pulse Current (A) Fig. 6 - Capacitance Fig. 9 - Incremental Clamping Voltage Curve Bi-Directional 100 100 ge W8 xa v2e0f oImrmp:ulse SA170 SA110 ge W10a xv e1f0o0rm0 :Impulse Volta DVC = VC - VBR SSAA7504 Volta SA170 SA110 DVC = VC - VBR ping 10 SA40 ping 10 SA70 m SA30 m SA40 SA24 a a Cl Cl SA15 ental SSSAAA211458 ental SA9.0 m 1.0 SA12 m 1.0 SA6.5 ncre SSAA59..00 ncre - IC - IC V V 0.1 0.1 0.5 1 10 50 0.5 1 10 50 I - Peak Pulse Current (A) I - Peak Pulse Current (A) PP PP Fig. 7 - Incremental Clamping Voltage Curve Uni-Directional Fig. 10 - Incremental Clamping Voltage Curve Bi-Directional Revision: 16-Jan-18 4 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor 100 200 TJ = 25 °C C) Pulse Width = 300 µs V/° 100 nt (A) 1200 1 % Duty Cycle ent (m Uni-Directional Curre oeffici Bi-Directional d C ar e 10 w ur - ForF 21 mperat I e T 0.2 Uni-Directional Only V - 0.1 1.0 0 0.5 1 1.5 2 2.5 5.0 10 100 500 V - Forward Voltage (V) V - Rated Stand-Off Voltage (V) F WM Fig. 11 - Typical Instantaneous Forward Voltage Fig. 12 - Breakdown Voltage Temperature Coefficient Curve PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-15 (DO-204AC) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Revision: 16-Jan-18 5 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: SA8.0A-E3/4 SA8.0A-E3/51 SA8.0A-E3/54 SA8.0A-E3/73 SA8.0AHE3/54 SA8.0AHE3/73 SA8.0C/54 SA8.0CA/4 SA8.0CA/54 SA8.0CA-E3/23 SA8.0CA-E3/4 SA8.0CA-E3/51 SA8.0CA-E3/54 SA8.0CA-E3/73 SA8.0CAHE3/54 SA8.0CAHE3/73 SA8.0C-E3/4 SA8.0C-E3/51 SA8.0C-E3/54 SA8.0C-E3/73 SA8.0CHE3/54 SA8.0CHE3/73 SA8.0- E3/4 SA8.0-E3/51 SA8.0-E3/54 SA8.0-E3/73 SA8.0HE3/54 SA8.0HE3/73 SA8.5/54 SA8.5A/4 SA8.5A/54 SA8.5A-E3/4 SA8.5A-E3/51 SA8.5A-E3/54 SA8.5A-E3/73 SA8.5AHE3/54 SA8.5AHE3/73 SA8.5C/54 SA8.5CA/4 SA8.5CA/54 SA8.5CA-E3/4 SA8.5CA-E3/51 SA8.5CA-E3/54 SA8.5CA-E3/73 SA8.5CAHE3/54 SA8.5CAHE3/73 SA8.5C-E3/4 SA8.5C-E3/51 SA8.5C-E3/54 SA8.5C-E3/73 SA8.5CHE3/54 SA8.5CHE3/73 SA8.5-E3/4 SA8.5- E3/51 SA8.5-E3/54 SA8.5-E3/73 SA8.5HE3/54 SA8.5HE3/73 SA85A/4 SA85A/54 SA85A-E3/4 SA85A-E3/51 SA85A-E3/54 SA85A-E3/73 SA85AHE3/54 SA85AHE3/73 SA85CA/4 SA85CA/54 SA85CA-E3/4 SA85CA-E3/51 SA85CA-E3/54 SA85CA-E3/73 SA85CAHE3/54 SA85CAHE3/73 SA9.0/54 SA9.0A/4 SA9.0A/54 SA9.0A-E3/4 SA9.0A-E3/51 SA9.0A-E3/54 SA9.0A-E3/73 SA9.0AHE3/54 SA9.0AHE3/73 SA9.0C/54 SA9.0CA/4 SA9.0CA/54 SA9.0CA-E3/4 SA9.0CA-E3/51 SA9.0CA-E3/54 SA9.0CA-E3/73 SA9.0CAHE3/54 SA9.0CAHE3/73 SA9.0C-E3/51 SA9.0C-E3/54 SA9.0C-E3/73 SA9.0CHE3/54 SA9.0CHE3/73 SA9.0-E3/4 SA9.0-E3/51 SA9.0-E3/54