PH Emboss Tape CONNECTOR PH CONNECTOR 2.0 mm pitch/Disconnectable Crimp style connectors 6 5 PH CONNECTO4R3 Specifications PH CONNECTOR 2 • Current rating: 2 A AC/DC (AWG #24) • Voltage rating: 100 V AC/DC • Temperature range: -25℃ to +85℃ ( including temperature rise in applying electrical current) • Contact resistance: Initial value/ 10 mΩ max. After environmental tests/ 20 mΩ max. • Insulation resistance: 1,000 MΩ min. • Withstanding voltage: 800 VAC/ minute • Applicable wire: AWG #32 to #24 This is a thin, low-profile 2.0 mm pitch • Applicable PC board thickness: 0.8 to 1.6 mm connector 8.0 mm in height after mounting * I n using the products, refer to "Handling Precautions for Terminals and 4.5 mm in width. It is designed to meet and Connectors" described on our website (Technical documents the demand for high-density connection of of Product information page). internal wires to printed circuit boards. It is * RoHS2 compliance * Dimensional unit: mm compact, highly reliable and low in cost. * Contact JST for details. ● Reliable contact ® ® ® Standards ● Fully shrouded header ● Printed circuit board retention mechanism ® Recognized E60389 ● Surface mount model (SMT) R75087 ® PC board layout and Assembly layout 〈Through-hole type〉 Top entry type Side entry type 2±0.05 4.5 2±0.05 (9.6) 7.6 8 φ0.7+00.1 (8) 6 φ0.7+00.1 4. 6.25 Note: 1. The above figure is the figure viewed from soldering side. 2. Tolerances are non-cumulative: ±0.05 mm for all centers. 3. Hole dimensions differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. 〈SMT type〉 SM4 type SM4 type Top entry type Side entry type 1.6±0.1 1.6±0.1 2±0.05 1.5±0.1 1.6±0.1 2±0.05 5 (2) End face of wafer End face of wafer on the mating side on the mating side 1 2 0. (9.6) (1) ±0.1C3ircuit No.1 2 max. 7.5 min. (8.6) 6.6 ±0.13.4 5.5 max. 9 min. 5 7.6 5. 1 min. 1min. Circuit No.1 Note: 1 . The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: ±0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. 1

PH Emboss Tape CONNECTOR PH CONNECTOR 2.0 mm pitch/Disconnectable Crimp style connectors PH CONNECTOR PH CONNECTOR Contact 5.7 1.5 Model No. mm2 AAppWliGca #ble wIinrseulation O.D. (mm) Qr'etye/l 2.85 2.05 1 SPH-002T-P0.5S 0.05 ～ 0.22 30～24 0.8～1.5 8,000 SPH-002T-P0.5L 0.08 ～ 0.22 28～24 0.8～1.5 8 SPH-004T-P0.5S 0.032～0.08 32～28 0.5～0.9 10,000 0 2. Material and Finish Phosphor bronze, tin-plated (reflow treatment) RoHS2 compliance Crimping Applicator Note: Contact 1. Contact JST for gold-plated products. machine Crimp applicator Dies Crimp applicator with dies 2. SPH-002T-P0.5L is low-insertion force type contact, for easier insertion/ SPH-002T-P0.5S MK/SPH-002-05S APLMK SPH002-05S withdrawal, which would be less resistant to the vibration. MKS-L SPH-002T-P0.5L AP-K2N MK/SPH-002-05L APLMK SPH002-05L The crimp height is different from the standard. 3. Contact JST for details. SPH-004T-P0.5S MKS-L-10 MK/SPH-002-05S APLMK SPH004-05S Note: Contact JST for fully automatic crimping applicator. Housing B cNiroc.u oitfs Model No. ADimensions (mmB) Qb'toyx/ Circuit 1.9 A No.1 2 5 4.5 2 PHR-2 2.0 5.8 1,000 0. 3 PHR-3 4.0 7.8 1,000 4 PHR-4 6.0 9.8 1,000 5 PHR-5 8.0 11.8 1,000 T 8 6 PHR-6 10.0 13.8 1,000 H JS 6.35 78 PPHHRR--78 1124..00 1157..88 11,,000000 9 PHR-9 16.0 19.8 1,000 10 PHR-10 18.0 21.8 1,000 □0.6 11 PHR-11 20.0 23.8 1,000 12 PHR-12 22.0 25.8 1,000 <For reference> As the color identification, 13 PHR-13 24.0 27.8 1,000 the following alphabet shall be put in the underlined part. 14 PHR-14 26.0 29.8 1,000 For availability, delivery and minimum order quantity, contact JST. 15 PHR-15 28.0 31.8 1,000 ex. PHR-2-oo- 16 PHR-16 30.0 33.8 1,000 (blank)...natural (white) Material and Finish BK...black R...red TR...tomato red BL...blue Y...yellow PA 66, UL94V-0, natural (white) L...lemon yellow M...green D...orange N...brown P ...purple PK...pink H...gray LE...light blue RoHS2 compliance FY...vivid yellow DPK...dark pink Through-hole type Header No. of Model No. Dimensions (mm) Q'ty/box Top entry type circuits Top entry type Side entry type A B Top entry typeSide entry type ボトム 2 B2B-PH-K-S S2B-PH-K-S 2.0 5.9 1,000 1,000 ̶ (2 circuits) (3 circuits or more) 3 B3B-PH-K-S S3B-PH-K-S 4.0 7.9 1,000 1,000 ̶ 4 B4B-PH-K-S S4B-PH-K-S 6.0 9.9 1,000 500 ̶ 4.5 4.5 5 B5B-PH-K-S S5B-PH-K-S 8.0 11.9 1,000 500 ̶ B 1.7 B 1.7 6 B6B-PH-K-S S6B-PH-K-S 10.0 13.9 1,000 500 ̶ 7 B7B-PH-K-S S7B-PH-K-S 12.0 15.9 500 500 ̶ 8 B8B-PH-K-S S8B-PH-K-S 14.0 17.9 500 250 ̶ 9 B9B-PH-K-S S9B-PH-K-S 16.0 19.9 500 250 ̶ 6 6 10 B10B-PH-K-S S10B-PH-K-S 18.0 21.9 500 250 ̶ 11 B11B-PH-K-S S11B-PH-K-S 20.0 23.9 500 250 ̶ 3.4 3.4 1123 BB1123BB--PPHH--KK--SS SS1123BB--PPHH--KK--SS 2224..00 2257..99 420500 225500 ̶̶ Circuit 14 B14B-PH-K-S S14B-PH-K-S 26.0 29.9 250 250 ̶ 1.95 A No.1 □0.5 2 □0.5 15 B15B-PH-K-S S15B-PH-K-S 28.0 31.9 250 200 ̶ 1.95 A Circuit No.1 16 B16B-PH-K-S S16B-PH-K-S 30.0 33.9 250 200 ̶ Material and Finish Side entry type 4.8 Post: Brass, copper-undercoated, tin-plated (reflow treatment) B 1.7 Wafer: PA 66, UL94V-0, natural (white) RoHS2 compliance This product displays (LF)(SN) on a label. <For reference> As the color identification, 5 the following alphabet shall be put in the underlined part. 6 6.2 For availability, delivery and minimum order quantity, contact JST. ex. B2B-PH-K-oo- S ...natural (white) 2 □0.5 CNior.c1uit 1.6 3.4 K ...black R...red TR...tomato red 1.95 A E ...blue Y...yellow L...lemon yellow M...green O ...orange N...brown P...purple PK...pink H...gray LE...light blue FY...vivid yellow (blank)...ivory 2

PPHH EEmmbboossss TTaappee CCOONNNNEECCTTOORR PPHH CCOONNNNEECCTTOORR 22..00 mmmm ppiittcchh//DDiissccoonnnneeccttaabbllee CCrriimmpp ssttyyllee ccoonnnneeccttoorrss PPHH CCOONNNNEECCTTOORR PPHH CCOONNNNEECCTTOORR Through-hole type Header〈Low insertion force type〉 Top entry type No. of Model No. Dimensions (mm) Q'ty/box circuits Top entry type Side entry type A B Top entry typeSide entry type (2 circuits) (3 circuits or more) 2 B2B-PH-KL S2B-PH-KL 2.0 5.9 1,000 1,000 3 B3B-PH-KL S3B-PH-KL 4.0 7.9 1,000 1,000 4 B4B-PH-KL S4B-PH-KL 6.0 9.9 1,000 500 4.5 4.5 B 1.7 B 1.7 5 B5B-PH-KL S5B-PH-KL 8.0 11.9 1,000 500 6 B6B-PH-KL S6B-PH-KL 10.0 13.9 1,000 500 7 B7B-PH-KL S7B-PH-KL 12.0 15.9 500 500 8 B8B-PH-KL S8B-PH-KL 14.0 17.9 500 250 6 6 9 B9B-PH-KL S9B-PH-KL 16.0 19.9 500 250 10 B10B-PH-KL S10B-PH-KL 18.0 21.9 500 250 3.4 3.4 11 B11B-PH-KL S11B-PH-KL 20.0 23.9 500 250 Circuit 12 B12B-PH-KL S12B-PH-KL 22.0 25.9 400 250 1.95 A No.1 □0.5 2 □0.5 13 B13B-PH-KL S13B-PH-KL 24.0 27.9 250 250 1.95 A Circuit No.1 14 B14B-PH-KL S14B-PH-KL 26.0 29.9 250 200 15 B15B-PH-KL S15B-PH-KL 28.0 31.9 250 200 Side entry type 16 B16B-PH-KL S16B-PH-KL 30.0 33.9 250 200 Material and Finish 4.8 B 1.7 Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, gray RoHS2 compliance This product displays (LF)(SN) on a label. 5 6 6.2 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2B-PH-KL-oo- 2 □0.5 Circuit 1.6 3.4 (blank)...gray 1.95 A No.1 R ...red E...blue S...natural (white) SMT type Header Model No. Dimensions (mm) Top entry type No. of Q'ty/ circuits Top entry type Side entry type A B reel B Top entry type Side entry type 2.975 A 5 (2) 2 B2B-PH-SM4-TB S2B-PH-SM4-TB 2.0 7.95 7.9 1,000 2 1.9 3 B3B-PH-SM4-TB S3B-PH-SM4-TB 4.0 9.95 9.9 1,000 4 B4B-PH-SM4-TB S4B-PH-SM4-TB 6.0 11.95 11.9 1,000 5 B5B-PH-SM4-TB S5B-PH-SM4-TB 8.0 13.95 13.9 1,000 6.6 6 B6B-PH-SM4-TB S6B-PH-SM4-TB 10.0 15.95 15.9 1,000 7 B7B-PH-SM4-TB S7B-PH-SM4-TB 12.0 17.95 17.9 1,000 8 B8B-PH-SM4-TB S8B-PH-SM4-TB 14.0 19.95 19.9 1,000 Circuit No.1 1.4 2.2 9 B9B-PH-SM4-TB S9B-PH-SM4-TB 16.0 21.95 21.9 1,000 10 B10B-PH-SM4-TB S10B-PH-SM4-TB 18.0 23.95 23.9 1,000 11 B11B-PH-SM4-TB S11B-PH-SM4-TB 20.0 25.95 25.9 1,000 Side entry type 12 B12B-PH-SM4-TB S12B-PH-SM4-TB 22.0 27.95 27.9 1,000 13 B13B-PH-SM4-TB S13B-PH-SM4-TB 24.0 29.95 29.9 1,000 4 14 B14B-PH-SM4-TB S14B-PH-SM4-TB 26.0 31.95 31.9 1,000 5 2. 15 B15B-PH-SM4-TB S15B-PH-SM4-TB 28.0 33.95 33.9 1,000 5. 16 B16B-PH-SM4-TB ̶ 30.0 35.95 ‒ 1,000 Material and Finish Circuit No.1 2 1.6 Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) 2.95 A 6 (2.6) Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) B RoHS2 compliance This product displays (LF)(SN) on a label. Note: Contact JST for the top entry type headers with suction cap. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2B-PH-SM4-oo-TB (blank)...natural (ivory) R...red E...blue M...green L...lemon yellow K...black DPK...dark pink 3