Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits • RoHS compliant • Voltage capability up to 1000 V • Glass – passivated junctions • Surge capability up to 225 A Applications Agency Approval Typical applications are capacitive discharge systems for Agency Agency File Number strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white L Package: E71639 goods appliances. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Main Features Symbol Value Unit Schematic Symbol I 15 & 16 A T(RMS) V /V 400 to 1000 V DRM RRM A K I 30 mA GT G Absolute Maximum Ratings — Standard SCRs Symbol Parameter Test Conditions Value Unit Sxx15L T = 90°C 15 C I RMS on-state current A T(RMS) Sxx16R T = 110°C 16 Sxx16N C Sxx15L T = 90°C 9.5 C I Average on-state current Sxx16R A T(AV) T = 110°C 10.0 Sxx16N C single half cycle; f = 50Hz; 188 T (initial) = 25°C I Peak non-repetitive surge current J A TSM single half cycle; f = 60Hz; 225 T (initial) = 25°C J I2t I2t Value for fusing t = 8.3 ms 210 A2s p di/dt Critical rate of rise of on-state current f = 60 Hz ; T = 125°C 125 A/μs J I Peak gate current T = 125°C 3 A GM J P Average gate power dissipation T = 125°C 0.6 W G(AV) J T Storage temperature range -40 to 150 °C stg T Operating junction temperature range -40 to 125 °C J Note: xx = voltage © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16

Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Electrical Characteristics (T = 25°C, unless otherwise specified) J Value Symbol Test Conditions Sxx15x Unit Sxx16x MAX. 30 mA I V = 12V R = 60 Ω GT D L MAX. 1 V V V = 12V R = 60 Ω MAX. 1.5 V GT D L 400V 450 600V 425 V = V ; gate open; T = 100°C D DRM J 800V 400 dv/dt 1000V MIN. 200 V/μs 400V 350 V = V ; gate open; T = 125°C 600V 325 D DRM J 800V 300 V V = V R = 3.3 kΩ T = 110°C MIN. 0.2 V GD D DRM L J I I = 200mA (initial) MAX. 40 mA H T t I=2A; t=50μs; dv/dt=5V/μs; di/dt=-30A/μs MAX. 35 μs q T p t I = 2 x I PW = 15µs I = 12A TYP. 2 μs gt G GT T Note: xx = voltage, x = package (1) I=2A; t=50μs; dv/dt=5V/μs; di/dt=-30A/μs T p Static Characteristics Symbol Test Conditions Value Unit 15A Device I = 30A; t = 380 µs V T p MAX. 1.6 V TM 16A Device I = 32A; t = 380 µs T p 400 - 600V 10 T = 25°C J 800 - 1000V 20 400 - 600V 500 I / I V = V T = 100°C 800V MAX. 1000 μA DRM RRM DRM RRM J 1000V 3000 400 - 600V 1000 T = 125°C J 800V 2000 Thermal Resistances Symbol Parameter Value Unit Sxx16R/ Sxx16N 1.1 R Junction to case (AC) °C/W θ(J-C) Sxx15L 2.5 Sxx16R/Sxx16N 40 R Junction to ambient °C/W θ(J-A) Sxx15L 50 Note: xx = voltage © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16

Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 1: Normalized DC Gate Trigger Current Figure 2: Normalized DC Gate Trigger Voltage vs. Junction Temperature vs. Junction Temperature 2.0 2.0 Ratio of I / I (T = 25°C)GTGTJ011...055 Ratio of V / V (T= 25ºC)GTGTJ 011...055 0.0 0.0 -40 -15 10 35 60 85 110 125 -40 -15 10 35 60 85 110 125 Junction Temperature (T) -- (ºC) Junction Temperature (T) -- (°C) J J Figure 3: Normalized DC Holding Current Figure 4: On-State Current vs. On-State vs. Junction Temperature Voltage (Typical) 2.0 60 s p m A – 50 25°C) 1.5 ent (i) T40 T = J Curr of I / I(HH 1.0 On-state 30 atio ous 20 R 0.5 ne a nt 10 a st n 0.0 I 0 -40 -15 10 35 60 85 110 125 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Junction Temperature (TJ) -- (°C) Instantaneous On-state Voltage (vT) – Volts Figure 5: Power Dissipation (Typical) Figure 6: Maximum Allowable Case Temperature vs. RMS On-State Current vs. RMS On-State Current 14 130 ge On-State Power Dissipation[P] - (Watts)D(AV) 1102468 Maximum Allowable CaseTemperature (T ) - °CC11111100112290505055 Sxx15L SSxxxx1166RN vera 2 90 CURRENT WAVEFORM: Sinusoidal A 85 LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 0 80 0 2 4 6 8 10 12 14 16 0 2 4 6 8 10 12 14 16 18 RMS On-State Current [I T(RMS) ] - (Amps) RMS On-State Current [IT(RMS)] - Amps © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16

Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 7: Maximum Allowable Case Temperature Figure 8: Maximum Allowable Ambient Temperature vs. Average On-State Current vs. RMS On-State Current 130 1.2 125 Sxx16R 1.0 aximum Allowable Case Temperature (T)- °CC11111110029055005 Sxx15L Sxx16N Normalized Peak Current 000...468 M 90 0.2 CURRENT WAVEFORM: Sinusoidal 85 LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 80 0.0 0 1 2 3 4 5 6 7 8 9 10 11 0 25 50 75 100 125 150 Average On-State Current [I ] - Amps Case Temperature (T ) - °C T(AVE) C Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° nt 100 FREE AIR RATING e m Allowable Ambiperature (T) - °CA6800 Sxx15L SSxxxx1166RN ximuTem40 a M 20 0 0.0 0.5 1.0 1.5 Average On-State Current [I ] - Amps T(AVE) Note: xx = voltage Figure 10: Peak Capacitor Discharge Current Figure 11: Peak Capacitor Discharge Current Derating 1000 1.2 s mp 1.0 nt (I) - ATM ak Current 0.8 k Discharge Curre 100 ITRM Normalized Pe 00..46 a 0.2 e P tW 10 0.0 0.5 1.0 10.0 50.0 0 25 50 75 100 125 150 Pulse Current Duration (t ) - ms Case Temperature (T ) - °C w C © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16

Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 12: Surge Peak On-State Current vs. Number of Cycles 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [I ]: Maximum Rated T(RMS) ve) mps Value at Specified Case Temperature Non-repetiti) – Ant (I TSM 100 SSxxxx1166RN N12..o Gf Otoeavlslteo:erw lcoionandgt mrsoualr ymg ena oyct ub rberee l norets ptin edtaeutrrevindag l.u anntidl jiumnmcteiodnia tely Peak Surge (n-state Curre Sxx15L treatmedp evraaltuuer.e has returned to steady-state O 10 1 10 100 1000 Surge Current Duration -- Full Cycles Soldering Parameters Reflow Condition Pb – Free assembly t P T P - Temperature Min (T ) 150°C s(min) e RRaammpp--uupp Pre Heat -- TTeimmep e(mraitnu rteo Mmaaxx )( T(ts()max)) 2600 0–° C180 secs rutare TS(mTaxL) tL s p m RRaammpp--ddoown Average ramp up rate (Liquidus Temp) PPrreehheeaatt 5°C/second max e (TL) to peak T TS(min) t T to T - Ramp-up Rate 5°C/second max S S(max) L - Temperature (T) (Liquidus) 217°C Reflow L 25 - Temperature (t) 60 – 150 seconds time to peak temperature L Time Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Temperature (t) p Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (T) 8 minutes Max. P Do not exceed 280°C Additional Information Datasheet Resources Samples © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16

Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Physical Specifications Environmental Specifications Test Specifications and Conditions Terminal Finish 100% Matte Tin-plated MIL-STD-750, M-1040, Cond A Applied AC Blocking Peak AC voltage @ 125°C for 1008 hours UL recognized epoxy meeting flammability Body Material MIL-STD-750, M-1051, classification 94V-0 Temperature Cycling 100 cycles; -40°C to +150°C; 15-min dwell-time Lead Material Copper Alloy EIA / JEDEC, JESD22-A101 Temperature/ 1008 hours; 320V - DC: 85°C; 85% Humidity rel humidity MIL-STD-750, M-1031, Design Considerations High Temp Storage 1008 hours; 150°C Careful selection of the correct device for the application’s Low-Temp Storage 1008 hours; -40°C operating parameters and environment will go a long way Resistance to toward extending the operating life of the Thyristor. Good MIL-STD-750 Method 2031 Solder Heat design practice should limit the maximum continuous current through the main terminals to 75% of the device Solderability ANSI/J-STD-002, category 3, Test A rating. Other ways to ensure long life for a power discrete Lead Bend MIL-STD-750, M-2036 Cond E semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 Inches Millimeters O Dimension E A P .83.2130 Min Max Min Max ANODE A 0.380 0.420 9.65 10.67 B C B 0.105 0.115 2.67 2.92 13.36 D .526 C 0.230 0.250 5.84 6.35 .72.0716 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F NOTCH IN F 0.110 0.130 2.79 3.30 GATE LEAD TO ID. G 0.540 0.575 13.72 14.61 NON-ISOLATED R TAB G H 0.025 0.035 0.64 0.89 L J 0.195 0.205 4.95 5.21 H K 0.095 0.105 2.41 2.67 CATHODE ANODE GATE K N L 0.060 0.075 1.52 1.91 J M Note: Maximum torque to be applied to mounting tab M 0.085 0.095 2.16 2.41 is 8 in-lbs. (0.904 Nm). N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16

Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT AREA (REF.) 0.17 IN2 Inches Millimeters O Dimension E A P .83.2130 Min Max Min Max A 0.380 0.420 9.65 10.67 B C B 0.105 0.115 2.67 2.92 13.36 D .526 C 0.230 0.250 5.84 6.35 7.01 .276 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 R G H 0.025 0.035 0.64 0.89 L H J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 CATHODE ANODE GATE K N Note: Maximum torque to L 0.060 0.075 1.52 1.91 J M be applied to mounting tab is 8 in-lbs. (0.904 Nm). M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Dimensions — TO- 263AB (N-package) — D2-Pak Surface Mount TC MEASURING POINT AREA: 0.11 in2 Inches Millimeters B V C Dimension ANODE E Min Max Min Max 8.41 A 0.360 0.370 9.14 9.40 .331 A .72.0716 B 0.380 0.420 9.65 10.67 S C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 W U E 0.045 0.060 1.14 1.52 CATHODE GATE K J F 0.060 0.075 1.52 1.91 G 8.13 D H .320 G 0.095 0.105 2.41 2.67 F 11.68 2.16 H 0.092 0.102 2.34 2.59 .460 .085 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 7.01 7.01 S 0.590 0.625 14.99 15.88 .276 .276 16.89 V 0.035 0.045 0.89 1.14 .665 8.89 1.40 U 0.002 0.010 0.05 0.25 .350 .055 W 0.040 0.070 1.02 1.78 3.81 .150 2.03 .080 6.60 .260 © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16

Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Product Selector Voltage Part Number Gate Sensitivity Type Package 400V 600V 800V 1000V Sxx15L X X X X 30mA Standard SCR TO-220L Sxx16R X X X X 30mA Standard SCR TO-220R Sxx16N X X X X 30mA Standard SCR TO-263 Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx15LTP Sxx15L 2.2 g Tube 500 (50 per tube) Sxx16RTP Sxx16R 2.2 g Tube 500 (50 per tube) Sxx16NTP Sxx16N 1.6 g Tube 500 (50 per tube) Sxx16NRP Sxx16N 1.6 g Embossed Carrier 500 Note: xx = Voltage TO-263 Embossed Carrier Reel Pack (RP) Specs Part Marking System Meets all EIA-481-2 Standards TO-220 AB - (L and R Package) TO-263 AB - (N Package) 0.059 0.63 0.157 (1.5) (16.0) (4.0) DIA Gate Cathode Sxx16R 0.945 0.827* YM (24.0) (21.0) ® *Cover tape Anode 12.99 Date Code Marking 0.512 (13.0) (330.0) Y:Year Code Arbor Hole Dimensions M: Month Code Diameter are in inches XXX: Lot Trace Code (and millimeters). Part Numbering System 1.01 (25.7) S 60 16 R 56 Direction of Feed DS:E SVCICRE TYPE LxEx:A LDe aFdO RFoMrm D IOMpEtNioSnIONS VOLTAGE RATING 40: 400V SENSITIVITY & TYPE 60: 600V (blank): 30mA 80: 800V K0: 1000V PACKAGE TYPE CURRENT RATING L: TO-220 Isolated 15: 15A R: TO-220 Non-Isolated 16: 16A N: TO-263 (D2-Pak) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/14/16