Teccor® brand Thyristors 35 Amp Standard SCRs Sxx35x Series Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits (cid:116)(cid:1)(cid:1)(cid:51)(cid:80)(cid:41)(cid:52)(cid:1)(cid:68)(cid:80)(cid:78)(cid:81)(cid:77)(cid:74)(cid:66)(cid:79)(cid:85) (cid:116)(cid:1)(cid:1)(cid:55)(cid:80)(cid:77)(cid:85)(cid:66)(cid:72)(cid:70)(cid:1)(cid:68)(cid:66)(cid:81)(cid:66)(cid:67)(cid:74)(cid:77)(cid:74)(cid:85)(cid:90)(cid:1)(cid:86)(cid:81)(cid:1) to 1000 V (cid:116)(cid:1)(cid:1)(cid:40)(cid:77)(cid:66)(cid:84)(cid:84)(cid:1)(cid:111)(cid:1)(cid:81)(cid:66)(cid:84)(cid:84)(cid:74)(cid:87)(cid:66)(cid:85)(cid:70)(cid:69)(cid:1) junctions (cid:116)(cid:1)(cid:1)(cid:52)(cid:86)(cid:83)(cid:72)(cid:70)(cid:1)(cid:68)(cid:66)(cid:81)(cid:66)(cid:67)(cid:74)(cid:77)(cid:74)(cid:85)(cid:90)(cid:1)(cid:86)(cid:81)(cid:1)(cid:85)(cid:80)(cid:1) 500 A Applications Agency Approval Typical applications are AC solid-state switches, industrial Agency Agency File Number power tools, exercise equipment, white goods and commercial appliances. J & K Packages: E71639 ® Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Main Features s Schematic Symbol R C Symbol Value Unit S I 35 A A T(RMS) 5 V /V 400 to 1000 V DRM RRM A K 3 I 40 mA GT G Absolute Maximum Ratings Symbol Parameter Test Conditions Value Unit I RMS on-state current T = 95°C 35 A T(RMS) C I Average on-state current T = 95°C 22.0 A T(AV) C single half cycle; f = 50Hz; 425 T (initial) = 25°C I Peak non-repetitive surge current J A TSM single half cycle; f = 60Hz; 500 T (initial) = 25°C J I2t I2t Value for fusing t = 8.3 ms 1035 A2s p di/dt Critical rate of rise of on-state current f = 60Hz ; T= 125°C 150 A/μs J I Peak gate current T= 125°C 3.5 A GM J P Average gate power dissipation T= 125°C 0.8 W G(AV) J T Storage temperature range -40 to 150 °C stg T Operating junction temperature range -40 to 125 °C J ©2010 Littelfuse, Inc 279 Sxx35x Series Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Revised: May 10, 2010 09:33 PM

Teccor® brand Thyristors 35 Amp Standard SCRs Electrical Characteristics (T = 25°C, unless otherwise specified) J Symbol Test Conditions Value Unit MAX. 40 I mA GT V = 12V; R = 30(cid:56) MIN. 5 D L V MAX. 1.5 V GT 400V 450 600V 425 V = V ; gate open; T = 100°C D DRM J 800V 400 dv/dt 1000V MIN. 200 V/μs 400V 350 V = V ; gate open; T = 125°C 600V 325 D DRM J 800V 300 V V = V ; R = 3.3 k(cid:56); T = 125°C MIN. 0.2 V GD D DRM L J I I = 400mA (initial) MAX. 50 mA H T t (1) MAX. 35 μs q t I = 2 x I ; PW = 15μs; I = 70A TYP. 2 μs gt G GT T Notes : (1) I=2A; t=50μs; dv/dt=5V/μs; di/dt=-30A/μs T p Static Characteristics Symbol Test Conditions Value Unit V I = 70A; t = 380μs MAX. 1.8 V TM T p 400 – 600V 10 T = 25°C J 800 – 1000V 20 400 – 600V 1000 I / I V / V T = 100°C 800V MAX. 1500 μA DRM RRM DRM RRM J 1000V 3000 400 – 600V 2000 T = 125°C J 800V 3000 Thermal Resistance Symbol Parameter Value Unit R Junction to case (AC) 0.7 °C/W (cid:82)(J-C) Sxx35x Series 280 ©2010 Littelfuse, Inc Specifications are subject to change without notice. Revised: May 10, 2010 09:33 PM Please refer to http://www.littelfuse.com for current information.

Teccor® brand Thyristors 35 Amp Standard SCRs Figure 1: Normalized DC Gate Trigger Current Figure 2: Normalized DC Gate Trigger Voltage vs. Junction Temperature vs. Junction Temperature 2.0 2.0 Ratio of I / I (T = 25°C)GTGTJ 011...505 atio of V / V (T = 25°C)GTGTJ011...505 R 0.0 0.0 -40 -15 10 35 60 85 110 125 -40 -15 10 35 60 85 110 125 Junction Temperature (T) -- (°C) Junction Temperature (T) -- (°C) J J Figure 3: Normalized DC Holding Current Figure 4: On-State Current vs. On-State vs. Junction Temperature Voltage (Typical) 2.0 120 s mp TJ = 25°C – A 100 s Ratio of I / I (T = 25°C)HHJ 011...505 neous On-state Current (i) T 468000 35 A SCR nta 20 a st n 0.0 I 0 -40 -15 10 35 60 85 110 125 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Junction Temperature (T) -- (°C) Instantaneous On-state Voltage (v) – Volts J T Figure 5: Power Dissipation (Typical) Figure 6: Maximum Allowable Case Temperature vs. RMS On-State Current vs. RMS On-State Current 30 130 n 125 o e On-State Power Dissipati[P] - (Watts)D(AV)11220505 aximum Allowable Case Temperature (T) - °CC 11111001129050505 g M Avera 5 8950 CLOUARDR:E RNeTs WistAivVeE oFrO IRndMu:c Stiivneusoidal CONDUCTION ANGLE: 180° 0 80 0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35 40 RMS On-State Current [IT(RMS)] - (Amps) RMS On-State Current [IT(RMS)] - Amps ©2010 Littelfuse, Inc 281 Sxx35x Series Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Revised: May 10, 2010 09:33 PM

Teccor® brand Thyristors 35 Amp Standard SCRs Figure 7: Maximum Allowable Case Temperature vs. Figure 8: Peak Capacitor Discharge Current Average On-State Current 130 1000 125 s p mum Allowable Case mperature (T) - °CC 111110112000505 arge Current (I) - AmTM 100 MaxiTe 9905 k Disch ITRM a 85 CLOUARDR:E RNeTs WistAivVeE oFrO IRnMdu: cStiinveusoidal Pe CONDUCTION ANGLE: 180° tW 80 10 0 5 10 15 20 25 0.5 1.0 10.0 50.0 Average On-State Current [I ] - Amps Pulse Current Duration (t ) - ms T(AVE) w Figure 9: Peak Capacitor Discharge Current Derating 1.2 1.0 nt e urr0.8 C k a e d P0.6 e z ali m0.4 or N 0.2 0.0 0 25 50 75 100 125 150 Case Temperature (T) - °C C Figure 10: Surge Peak On-State Current vs. Number of Cycles 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [I ]: Maximum Rated ve)mps Value at Specified Case TTe(RmMSp)erature Non-repetitient (I) – ATSM100 N12..o Gf Otoeavlslteo:erw lcoionandgt mrsoualr ymg ena oyct ub rberee l norets ptin edtaeutrrevindag l.u anntidl jiumnmcteiodnia tely ak Surge (state Curr treatmedp evraaltuuer.e has returned to steady-state PeOn- 10 1 10 100 1000 Surge Current Duration -- Full Cycles Sxx35x Series 282 ©2010 Littelfuse, Inc Specifications are subject to change without notice. Revised: May 10, 2010 09:33 PM Please refer to http://www.littelfuse.com for current information.

Teccor® brand Thyristors 35 Amp Standard SCRs Soldering Parameters Reflow Condition Pb – Free assembly t P T P - Temperature Min (T ) 150°C RRaammpp--uupp s(min) e r T Pre Heat - Temperature Max (Ts(max)) 200°C uta T L tL - Time (min to max) (t) 60 – 180 secs re S(max) s p RRaammpp--ddoown Average ramp up rate (Liquidus Temp) m PPrreehheeaatt 5°C/second max e (T) to peak T T L S(min) t T to T - Ramp-up Rate 5°C/second max S S(max) L - Temperature (T) (Liquidus) 217°C Reflow L 25 - Temperature (t) 60 – 150 seconds time to peak temperature Time L Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Temperature (t) p Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (T) 8 minutes Max. P Do not exceed 280°C Physical Specifications Environmental Specifications Test Specifications and Conditions s Terminal Finish 100% Matte Tin-plated R MIL-STD-750, M-1040, Cond A Applied AC Blocking C Peak AC voltage @ 125°C for 1008 hours S Body Material UL recognized epoxy meeting flammability MIL-STD-750, M-1051, A classification 94V-0 Temperature Cycling 100 cycles; -40°C to +150°C; 5 15-min dwell-time 3 Lead Material Copper Alloy EIA / JEDEC, JESD22-A101 Temperature/ 1008 hours; 320V - DC: 85°C; Humidity 85% rel humidity MIL-STD-750, M-1031, Design Considerations High Temp Storage 1008 hours; 150°C Careful selection of the correct device for the application’s Low-Temp Storage 1008 hours; -40°C operating parameters and environment will go a long way MIL-STD-750, M-1056 toward extending the operating life of the Thyristor. Good 10 cycles; 0°C to 100°C; 5-min dwelltime Thermal Shock design practice should limit the maximum continuous at each temperature; 10 sec (max) transfer current through the main terminals to 75% of the device time between temperature rating. Other ways to ensure long life for a power discrete EIA / JEDEC, JESD22-A102 semiconductor are proper heat sinking and selection of Autoclave 168 hours (121°C at 2 ATMs) and voltage ratings for worst case conditions. Overheating, 100% R/H overvoltage (including dv/dt), and surge currents are Resistance to MIL-STD-750 Method 2031 the main killers of semiconductors. Correct mounting, Solder Heat soldering, and forming of the leads also help protect Solderability ANSI/J-STD-002, category 3, Test A against component damage. Lead Bend MIL-STD-750, M-2036 Cond E ©2010 Littelfuse, Inc 283 Sxx35x Series Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Revised: May 10, 2010 09:33 PM

Teccor® brand Thyristors 35 Amp Standard SCRs Dimensions – TO- 218X (J Package) — Isolated Mounting Tab C Inches Millimeters Dimension B D Min Max Min Max U (diameter) A 0.810 0.835 20.57 21.21 Tc B 0.610 0.630 15.49 16.00 Measurement C 0.178 0.188 4.52 4.78 Point A D 0.055 0.070 1.40 1.78 F E Z E 0.487 0.497 12.37 12.62 F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.74 CATHODE H 0.075 0.095 1.91 2.41 W X J 0.575 0.625 14.61 15.88 J GATE K 0.256 0.264 6.50 6.71 N R L 0.220 0.228 5.58 5.79 T S M 0.080 0.088 2.03 2.24 M P G N 0.169 0.177 4.29 4.49 Y ANODE H P 0.034 0.042 0.86 1.07 K L R 0.113 0.121 2.87 3.07 V Note: Maximum torque to be applied to mounting tab S 0.086 0.096 2.18 2.44 is 8 in-lbs. (0.904 Nm). T 0.156 0.166 3.96 4.22 U 0.164 0.165 4.10 4.20 V 0.603 0.618 15.31 15.70 W 0.000 0.005 0.00 0.13 X 0.003 0.012 0.07 0.30 Y 0.028 0.032 0.71 0.81 Z 0.085 0.095 2.17 2.42 Dimensions – TO- 218AC (K Package) — Isolated Mounting Tab Inches Millimeters Dimension Min Max Min Max Tc Measurement Point B U (diameter) C A 0.810 0.835 20.57 21.21 D B 0.610 0.630 15.49 16.00 C 0.178 0.188 4.52 4.78 D 0.055 0.070 1.40 1.78 A E 0.487 0.497 12.37 12.62 F E W F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.74 GATE H 0.075 0.095 1.91 2.41 P J J 0.575 0.625 14.61 15.88 CATHODE K 0.211 0.219 5.36 5.56 ANODE M H L 0.422 0.437 10.72 11.10 Q G R M 0.058 0.068 1.47 1.73 N N 0.045 0.055 1.14 1.40 K Note: Maximum torque to be applied to mounting P 0.095 0.115 2.41 2.92 L tab is 8 in-lbs. (0.904 Nm). Q 0.008 0.016 0.20 0.41 R 0.008 0.016 0.20 0.41 U 0.164 0.165 4.10 4.20 W 0.085 0.095 2.17 2.42 Sxx35x Series 284 ©2010 Littelfuse, Inc Specifications are subject to change without notice. Revised: May 10, 2010 09:33 PM Please refer to http://www.littelfuse.com for current information.

Teccor® brand Thyristors 35 Amp Standard SCRs Product Selector Voltage Part Number Gate Sensitivity Type Package 400V 600V 800V 1000V Sxx35K X X X X 40mA Standard SCR TO-218AC Sxx35J X X X 40mA Standard SCR TO-218X Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx35KTP Sxx35K 4.40g Tube 250 (25 per tube) Sxx35JTP Sxx35J 5.23g Tube 250 (25 per tube) Note: xx = Voltage Part Numbering System Part Marking System S 6035 K 81 TO-218 AC (K Package) TO-218 X – (J Package) DEVICE TYPE S: SCR Lead Form Dimensions xx: Lead Form Option s SENSITIVITY & TYPE VOLTAGE RATING R 40: 400V [blank]: 40mA S6035K C 60: 600V S 80: 800V K0: 1000V yxxxx A ® 5 CURRENT RATING PACKAGE TYPE 3 35: 35A K: TO-218AC (Isolated) J: TO-218X (Isolated) ©2010 Littelfuse, Inc 285 Sxx35x Series Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Revised: May 10, 2010 09:33 PM