Emboss Tape ZH CONNECTOR 1.5mm pitch/Disconnectable Crimp style connectors Specifications ––––––––––––––––––– • Current rating: 1.0A AC, DC (AWG #26) • Voltage rating: 50 V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 20 mΩmax. After environmental tests/ 30 mΩ max. The ZH connector is very small with a • Insulation resistance: 500 MΩ min. mounting height of 5.6 mm and a thickness • Withstanding voltage: 500 VAC/minute of only 3.5 mm. Contact retention lances on • Applicable wire: AWG #32 to #26 the housing make insertion easier, while the • Applicable PC board thickness: 0.6 to 1.2 mm, 1.6 mm dimple at the center of the contact ensures *Refer to "General Instruction and Notice when using reliable contact with the post. Terminals and Connectors" at the end of this catalog. * Contact JST for details. • Compact, low profile design *Compliant with RoHS. • Housing lances • Reliable contact construction Standards –––––––––––––––––––––– • Distortion resistant construction 0 Recognized E60389 • Compatible with the ZR insulation 1 displacement connectors Certified LR20812 PC board layout and Assembly layout 〈Through-hole type (viewed from soldering side) 〉 Top entry type Side entry type 3.5 1.5±0 .05 1.5min 1.5±0.05 1.5min 7.1 n mi 2.2 5.6 φ0.7±0.03 4.6min 3.7） φ0 .7±0 .03 7 4 7 4） 2.（3. 2.3. （ 4.6 Note:1. Tolerances are non-cumulative: ±0.05 mm for all centers. 2. Hole dimension differ according to the type of PC board and piercing method.If PC boards made of hard material are used, the hole dimensions should be larger.The dimensions above should serve as a guideline. Contact JST for details. 〈SMTtype (viewed from component side) 〉 3.7 SM2 type SM4 type 1.3±0.1 1.5±0.1 Side entry type Top entry type 1.5±0.05 0.6 1.5× (N-1)＋ 0.9 ） 1.5± 0.05 0.9± 0.05 ±0.1 2 （6.4 0.7min min （7.4） 2.3 2 0.7min φ1.1＋ 00.1 7 Side entry type 1.4±0.1 1.1±0.1 3. ax 1.5±0.05 （7.4） m 2.5 ±0.1 1.9 4.3 7 Note: 1. N...Number of circuits 3. 2. Tolerances are non-cumulative: ±0.05 mm for all centers. ±0.1 3. The dimensions above should serve as a guideline. Contact JST for details. 1.4 1 0.7min

ZH CONNECTOR Contact Applicable wire Q'ty/ 4 Model No. 2.2 mm2 AWG# Insulation O.D. (mm) reel 0.5 1 1.4 1.1 SZH-002T-P0.5 0.08 〜0.13 28〜26 0.8〜1.1 13,000 SZH-003T-P0.5 0.032〜0.08 32〜28 0.5〜0.9 16,000 Material and Finish 5 1. Phosphor bronze, tin-plated (reflow treatment) RoHS compliance 3 0. Crimping Applicator Crimping Applicator Contact Contact machine Crimp applicator Dies Crimp applicator with dies machine Crimp applicator Dies Crimp applicator with dies MKS-L MK/SZH-002-05 APLMK SZH002-05 MKS-L MK/SZH-003-05 APLMK SZH003-05 SZH-002T-P0.5 AP-K2N SZH-003T-P0.5 AP-K2N 　　―　　 ― ― *MKS-SC SC/SZH-003-05 APLSC SZH003-05 Note: *Strip-crimp applicator. Housing Dimensions (mm) Q'ty/ Circuits Model No. A B bag B 3.4 2 ZHR-2 1.5 4.5 1,000 1.5 A 3 ZHR-3 3.0 6.0 1,000 Circuit No.1 1.5 4 ZHR-4 4.5 7.5 1,000 0.3 5 ZHR-5 6.0 9.0 1,000 6 ZHR-6 7.5 10.5 1,000 1 2 3 5 6 6 ZHR-6(3.0) 15.0 18.0 1,000 2 7 ZHR-7 9.0 12.0 1,000 4. 8 ZHR-8 10.5 13.5 1,000 9 ZHR-9 12.0 15.0 1,000 10 ZHR-10 13.5 16.5 1,000 3 0. 11 ZHR-11 15.0 18.0 1,000 12 ZHR-12 16.5 19.5 1,000 <For reference> As the color identification, 13 ZHR-13 18.0 21.0 1,000 the following alphabet shall be put in the underlined part. Material For availability, delivery and minimum order quantity, contact JST. ex. ZHR-2-oo- PA 66, UL94V-0, natural (white) (blank)…natural (white) RoHS compliance K…black R…red E…blue M…green L…lemon yellow Note: 1. ZHR-6(3.0) is 6 circuits 3.0 mm pitch plugged up. LE…light blue DO…dark orange H…gray As for thishousing, only circuit No.1 is marked. 2. ZHR-6(3.0) is not UL/CSA approved. Through-hole type shrouded header Model No. Dimensions (mm) Q'ty/box Top entry type Circuits Top entry Side entry Note) Note) Top entrySide entry Side entry type type Top entry type Side entry type A B type type type-3.4 <2 circuits> <3 circuits or more> 2 B2B-ZR S2B-ZR B2B-ZR-3.4 S2B-ZR-3.4 1.5 4.5 2,000 2,000 2,000 3 B3B-ZR S3B-ZR B3B-ZR-3.4 S3B-ZR-3.4 3.0 6.0 2,000 2,000 1,000 B 3.5 B 3.5 4 B4B-ZR S4B-ZR B4B-ZR-3.4 S4B-ZR-3.4 4.5 7.5 2,000 2,000 2,000 5 B5B-ZR S5B-ZR B5B-ZR-3.4 S5B-ZR-3.4 6.0 9.0 2,000 1,000 1,000 5 5 6 B6B-ZR S6B-ZR B6B-ZR-3.4 S6B-ZR-3.4 7.5 10.5 2,000 1,000 1,000 4. 4. 7 B7B-ZR S7B-ZR B7B-ZR-3.4 S7B-ZR-3.4 9.0 12.0 1,000 1,000 1,000 8 B8B-ZR S8B-ZR B8B-ZR-3.4 S8B-ZR-3.4 10.5 13.5 1,000 1,000 1,000 A 1.5C Niroc.u1it 2.2 2.73.4Note) φ0.5 1.5 C Nirocu.1it 2.7Note) 3.4 1 90 BB91B0B-Z-ZRR SS91B0B-Z-ZRR BB91B0B-Z-ZRR-3-.34.4 SS91B0B-Z-ZRR-3-.34.4 1123..05 1156..05 11,,000000 11,,000000 11,,000000 11 B11B-ZR S11B-ZR B11B-ZR-3.4 S11B-ZR-3.4 15.0 18.0 1,000 500 500 A 1.5 2.2 12 B12B-ZR S12B-ZR B12B-ZR-3.4 S12B-ZR-3.4 16.5 19.5 1,000 500 500 13 B13B-ZR S13B-ZR B13B-ZR-3.4 S13B-ZR-3.4 18.0 21.0 500 500 500 Side entry type Material and Finish Pin: Brass, copper-undercoated, tin-plated (reflow treatment) B Wafer: Glass-filled PA 66, UL94V-0, natural (ivory) RoHS compliance This product displays (LF)(SN) on a label. 7 Note: Headers with 3.4 mm long solder tails, suited for the 1.6 mm thick PC TSJ 2.4 3. board. 2.7e) 3.4 <For reference> As the color identification, ot the following alphabet shall be put in the underlined part. Circuit No.1 φ0.5 4.6 1.4 N For availability, delivery and minimum order quantity, contact JST. 1.5 ex. B2B-ZR-3.4-oo- A 1.5 (blank)…natural (ivory) K…black R…red E…blue M…green Y…Yellow 2

ZH CONNECTOR SMT type shrouded header SM2 type SM2 type Side entry type Circuits Model No. Dimensions (mm) Q’ty/ Side entry type A B reel 2 S2B-ZR-SM2-TF 1.5 4.5 1,000 3 S3B-ZR-SM2-TF 3.0 6.0 1,000 4 S4B-ZR-SM2-TF 4.5 7.5 1,000 5 S5B-ZR-SM2-TF 6.0 9.0 1,000 B 6 S6B-ZR-SM2-TF 7.5 10.5 1,000 A 1.5 5 1.5 7 S7B-ZR-SM2-TF 9.0 12.0 1,000 Circuit No.1 1.5 1 8 S8B-ZR-SM2-TF 10.5 13.5 1,000 9 S9B-ZR-SM2-TF 12.0 15.0 1,000 TSJH 3.7 10 S10B-ZR-SM2-TF 13.5 16.5 1,000 11 S11B-ZR-SM2-TF 15.0 18.0 1,000 1.5 12 S12B-ZR-SM2-TF 16.5 19.5 1,000 φ1 13 S13B-ZR-SM2-TF 18.0 21.0 1,000 0.9 Material and Finish Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 46, UL94V-0, natural (ivory) RoHS compliance This product displays (LF)(SN) on a label. SM4 type SM4 type (withsolder tabs) Top entry type Model No. Dimensions (mm) Q'ty/reel Circuits Top entry Side entry Top entry type Side entry type A B type type 2 B2B-ZR-SM4-TF S2B-ZR-SM4A-TF 1.5 6.0 1,000 1,000 B 3 B3B-ZR-SM4-TF S3B-ZR-SM4A-TF 3.0 7.5 1,000 1,000 A 2.25 4 B4B-ZR-SM4-TF S4B-ZR-SM4A-TF 4.5 9.0 1,000 1,000 1.5 5 5 B5B-ZR-SM4-TF S5B-ZR-SM4A-TF 6.0 10.5 1,000 1,000 6 B6B-ZR-SM4-TF S6B-ZR-SM4A-TF 7.5 12.0 1,000 1,000 7 7 B7B-ZR-SM4-TF S7B-ZR-SM4A-TF 9.0 13.5 1,000 1,000 TSJH 3. 8 B8B-ZR-SM4-TF S8B-ZR-SM4A-TF 10.5 15.0 1,000 1,000 1.5 9 B9B-ZR-SM4-TF S9B-ZR-SM4A-TF 12.0 16.5 1,000 1,000 Circuit No.1 10 B10B-ZR-SM4-TF S10B-ZR-SM4A-TF 13.5 18.0 1,000 1,000 11 B11B-ZR-SM4-TF S11B-ZR-SM4A-TF 15.0 19.5 1,000 1,000 12 B12B-ZR-SM4-TF S12B-ZR-SM4A-TF 16.5 21.0 1,000 1,000 13 B13B-ZR-SM4-TF S13B-ZR-SM4A-TF 18.0 22.5 1,000 1,000 Material and Finish Side entry type Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 6T, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) B RoHS compliance This product displays (LF)(SN) on a label. Note: 1. PA 9T is used for some colored products. A 2.25 5 1.5 2. The products listed above are supplied on embossed-tape. Circuit No.1 1.5 1 3. Contact JST for the top entry type headers with suction cap. <For reference> As the color identification, 7 the following alphabet shall be put in the underlined part. TSJH 3. For availability, delivery and minimum order quantity, contact JST. ex. S2B-ZR-SM4A-oo-TF- (blank)…natural (ivory) K…black R…red E…blue M…green L…lemon yellow LE…light blue DO…dark orange DH…dark gray 3