S Series Slide Switches Features/Benefits Typical Applications • 6 to 15 AMPS • Portable tools • Enclosed housing • Small appliances • PC and Snap-in panel mounting • Floor care products • Reversing option • RoHS compliant Models Available Specifications Materials I CONTACT RATING: Q contact material (S1XX, S2XX Models): HOUSING: 6/6 nylon (UL94V-2), black. 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ TOP PLATE: 6/6 nylon (UL94V-2), black. 125 V DC . (S5XX, S6XX Models): 12 AMPS @ e ACTUATOR: 6/6 nylon (UL94V-2), black (standard). d 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC . CONTACTS: Q contact material: Copper, silver plated. See page i (S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @ Sl 250 V AC . See page I-32 for additional ratings. I-32 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. I-32 for additional contact materials. CONTACT RESISTANCE: Below 10 m Ω typ. initial CONTACT SPRING: Music wire or stainless steel. @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. TERMINAL SEAL: Epoxy. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. OPERATING TEMPERATURE: -30ºC to +65ºC NOTE: Specifications and materials listed above are for switches with standard options. STORAGE TEMPERATURE: -30ºC to +85ºC For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–29 through I–32. For additional options not shown in catalog, consult Customer Service Center. Switch Function S101 SPST, 6 AMPS S202 (DPDT, 6 AMPS S802 DPDT, 15 AMPS Actuator S102 SPDT, 6AMPS 03 .335” high S112 SPDT, mom., 6 AMPS 04 .500” high S201 DPST, 6 AMPS 09 .250” high Detent S602 DPDT, 12 AMPS 12 Screwdriver slot 1 With detent S701 SPST, 15 AMPS (with marking) 2 Without detent S702 SPDT, 15 AMPS 13 Screwdriver slot (without marking) Mounting Style C2 Black cap SS Panel with mounting ears C3 Red cap MS PC thru-hole C5 Yellow cap S2 Snap-in panel with blacktop plate TS Panel with mounting ears Terminations 03 Solder lug with hole 02 PC Thru-hole Housing Markings 04 PC Thru-hole NONE No markings 07 Quick connect D ON-OFF 08 PC Thru-hole L ON WC Wire lead M ON-OFF N Red rectangle on one end Contact Material Q Silver B Gold Seal G Gold over silver NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com I–28

S Series Slide Switches SWITCH FUNCTION AVAILABLE AVAILABLE NO. MODEL AMP SWITCH MOUNTING NO. MODEL AMP SWITCH MOUNTING POLES NO. RATING FUNCTION SCHEMATIC STYLES POLES NO. RATING FUNCTION SCHEMATIC STYLES S101 6 SPST SS S201 6 DPST MS,SS,TS S102 6 SPDT MS,SS SP S202 6 DPDT MS,SS, TS S112 6 SPDT-MOM. MS,SS DP S701 15 SPST S1,S2,S3,ST S602 12 DPDT MS,SS, TS I S702 15 SPDT S1,S2,S3,ST S802 15 DPDT S1,S2,S3,ST S l i d SPST DPDT e Part number shown: S202031SS03Q Part number shown: S101031SS03Q NOTE: and MOM. in table indicates momentary action. All models with all options when ordered with ‘G’ or ‘Q’ contact material. Contacts make on side actuator thrown. ACTUATOR 03   04   09   12   13   .335” HIGH .500” HIGH .250” HIGH SCREWDRIVER SLOT SCREWDRIVER SLOT (WITH MARKING) (WITHOUT MARKING) .062 .062 (1,57) (1,57) NOTE: Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights White 115-230 markings (std.). Without markings. are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style, subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only. C2; C3; C5   SNAP-ON CAP NOTE: Actuator finish: matte. OPTION C1-CT CAP If no color is specified, black will be CODE2 COLOR supplied. Colored actuator caps may C2 BLACK also be ordered separately and user installed, see page I-32. C3 RED C5 YELLOW Available with S2 mounting style only. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com I–29

S Series Slide Switches DETENT 1   WITH DETENT Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802. 2   WITHOUT DETENT Standard with all momentary models: S112. MOUNTING STYLE SS   PANEL WITH MOUNTING EARS I PANEL MOUNTING AVAILABLE WITH: e Models: S101, S102, S112, d S201, S202 and S602 li Terminations: All except 08 S Actuators: 03, 04, 09, 12* and 13*. *12 and 13 actuators not available with S1XX models. S202031SS03Q DPDT MS   PC THRU-HOLE AVAILABLE WITH: Models: S101, S102, S112, S201, S202, S602 Terminations: 02, 04 and 08 Actuators: 03, 04, 09, 12* and 13* *12 and 13 actuators available with S201, S202 and S602 models only. PC MOUNTING For mounting information, see S202031MS02Q TERMINATIONS section, page I-31. DPDT S2   SNAP-IN PANEL PANEL MOUNTING .330 (8,38) S802C21S207Q PANEL THICKNESS: DPDT .020(0,57)–.200(5,08) AVAILABLE WITH: Models: S701, S702, and S802 Terminations: 04, 07, 57 and WC Actuators: C2, C3, C5 and 03 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com I–30

S Series Slide Switches MOUNTING STYLE TS   PANEL WITH MOUNTING EARS PANEL MOUNTING S202031TS03Q DPDT AVAILABLE WITH: I Models: S201, S202, and S602 Terminations: All Actuators: 03, 04 and 12. S l i d e TERMINATIONS 03   02   04   SOLDER LUG WITH HOLE PC THRU-HOLE PC THRU-HOLE PC MOUNTING 02 & 04 terminations Recommended with ‘MS’ Recommended with double pole mounting style only. models only. 07   08   WC   QUICK CONNECT PC THRU-HOLE WIRE LEAD .113±.015 (2,87±0,38) .051 .118±.015 (1,30) (3,00±0,38) 08 terminations with MS mounting style. .368±.015 (9,35±0,38) .140 (3,56) .503±.015 (12,78±0,38) 18 AWG wire for S1XX and S2XX models. 16 AWG wire for all other models. Black MS mounting style only. wire standard, other colors and lengths available, consult Customer Service Center. NOTE: All terminals on S1XX, S2XX and S6XX models are .020 (0,51) thick; UL style 1015. all terminals on S7XX and S8XX models are .031 (0,79) thick. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com I–31

S Series Slide Switches TOP PLATE MARKINGS NONE  D   L   M   N   NO MARKINGS ON-OFF ON ON-OFF RED RECTANGLE ON ONE END NOTE: Top plate markings are available with ‘S2’ mounting style only. The marking color Note: Orientation of I on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking actuator markings color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard. and terminals. Other marking colors are available, consult Customer Service Center. e d i CONTACT MATERIAL l S OPTION CONTACT CODE MATERIAL RATINGS S1XX, S2XX MODELS: 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC S6XX MODELS: 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; Q SILVER 2 POWER 1 AMP @ 125 V DC S7XX, S8XX MODELS: 15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC B GOLD 1 LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @20 V AC OR DC max. S1XX, S2XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC G GOLD OVER LOW LEVEL/DRY SILVER 3 CIRCUIT OR POWER S6XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC S7XX, S8XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. 2 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). All models with all options when ordered with ‘G’ or ‘Q’ contact material. 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials. SEAL NONE   E   NO SEAL EPOXY SEAL EPOXY .075 MAX. (1,91) AVAILABLE HARDWARE Cap, C2; C3 actuators Cap, 03 actuator PART NO. PART NO. 121160100 WHITE 121000101 WHITE 121160200 BLACK 121000102 BLACK 121160300 RED 121000103 RED Material: 6/6 Nylon Material: 6/6 Nylon Finish: Matte Finish: Gloss NOTE: Other cap colors available, consult Customer Service Center. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com I–32

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C &K Switches: S602131MS08B S202041MS04Q S702C21S207DQ S702C21S207DQE