DATA SHEET HIGH VOLTAGE CHIP RESISTORS RV series 0.5%, 1%, 5% sizes 0603/0805/1206/2010/2512 RoHS compliant IEC 62368-1 Safety Certificate issued by UL Demko: sizes 0603/0805/1206 8 V. 8 1 0 2 3, 1 r e b m e v o N – n o ti a c cifi e p s t c u d o r P

Product specification 2 Chip Resistor Surface Mount RV SERIES 0603/0805/1206/2010/25 12 (RoHS Compliant) 9 hSjCi3OPE ORDERING INFO RMATION - GLOBAL PART NUMBER & 12NC This specification describes Both part numbers are identified by the series, size, tolerance, packing RV0603/0805/1206/2010/2512 type, temperature coefficient, taping reel and resistance value. high voltage c hip resistors with Y YAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee lead-free term inations made by G LOBAL PART NUMBER (PREFERRED) thick film process. RV XXXX X X X XX XXXX L (1) (2) (3) (4) (5) (6) (7) APPLICATIONS (1) SIZE  Converter  Printer equipment 0603/0805/1206/2010/2512  Battery charger (2) TOLERANCE  Computer D = ±0.5%  Power supply F = ±1%  Car electronics J = ±5% (3) PACKAGING TYPE FEATURES R = Paper/PE taping reel  AEC-Q200 qualified for 47ohm K = Embossed taping reel ≤ R< 5Mohm  RoHS compliant (4) TEMPERATURE COEFFICIENT OF RESISTANCE  Reducing environmentally – = Base on spec hazardous wastes (5) TAPING REEL  High component and equipment reliability 07 = 7 inch dia. Reel  Non-forbidden materials used in (6) RESISTANCE VALUE products/production  Halogen Free Epoxy There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20.  Moisture sensitivity level: MSL 1  IEC 62368-1:2014 safety Detailed resistance rules show in table of “Resistance rule of global part number”. certificate (G.10.2) issued by UL (7) DEFAULT CODE Demko for the following sizes and resistance ranges: Letter L is system default code for ordering only (Note) - 0603: 100KΩ to 10MΩ - 0805: 100KΩ to 22MΩ - 1206: 100KΩ to 27MΩ Resistance rule of global part ORDERING EXAMPLE number The ordering code of a RV1206 Resistance code rule Example chip resistor, value 1 MΩ with XXKX 10K = 10,000 Ω ±5% tolerance, supplied in 7-inch (10 to 97.6 KΩ) 97K6 = 97,600 Ω tape reel is: RV1206JR-071ML. XXXK 100K = 10,000Ω NOTE (100 to 976 KΩ) 976K = 976,000Ω 1. All our R-Chip products meet RoHS XMXX 1M = 1,000,000 Ω compliant. "LFP" of the internal 2D reel (1 to 9.76 MΩ) 9M76 = 9,760,000 Ω label mentions "Lead Free Process" XXMX 10M = 10,000,000 Ω 2. On customized label, "LFP" or specific (10 to 16 MΩ) 27M = 27,000,000 Ω symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Nov. 13, 2018 V.8

Product specification 3 Chip Resistor Surface Mount RV SERIES 0603/0805/1206/2010/25 12 (RoHS Compliant) 9 PPHHYYCCOOMMPP BBRRAA NNDD oorrddeerriinngg ccooddeess Both GLOBA L PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand produc ts. GLOBAL PA RT NUMBER (PREFERRED) For detailed i nformation of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2322 XXX XXXXX L Last digit of 12NC (1) ( 2 ) (3) (4) Resistance decade (3) Last digit EMBOSSED (2) PAPER/PE (2) 0.01 to 0.0976 Ω 0 START T OL. RESISTANCE SIZE TYPE IN (1) (%) RANGE TAPE ON REEL TAPE ON REEL (units) 0.1 to 0.976 Ω 7 4,000 5,000 1 to 9.76 Ω 8 0805 VRC11 2322 ±5% 47 to 10M Ω - 792 61xxx 10 to 97.6 Ω 9 VRC12 2322 ±1% 47 to 10M Ω - 793 6xxxx 100 to 976 Ω 1 1206 VRC01 2322 ±5% 47 to 27M Ω - 790 61xxx 1 to 9.76 KΩ 2 VRC02 2322 ±1% 47 to 10M Ω - 791 6xxxx 10 to 97.6 KΩ 3 2512 VPRC221 2322 ±5% 47 to 16M Ω 762 98xxx - 100 to 976 KΩ 4 ( 1) The resistors have a 12-digit ordering code starting with 2322. 1 to 9.76 MΩ 5 ( 2) The subsequent 4 or 5 digits indicate the resistor tolerance and 10 to 97.6 MΩ 6 packaging. (3) The remaining 4 or 3 digits represent the resistance value with the Example: 0.02 Ω = 0200 or 200 last digit indicating the multiplier as shown in the table of 0.3Ω = 3007 or 307 “Last digit of 12NC”. 1Ω = 1008 or 108 (4) "L" is optional symbol (Note). ORDERING EXAMPLE 33 KΩ = 3303 or 333 The ordering code of a VRC01 resistor, value 1 MΩ with ±5% tolerance, 10 MΩ = 1006 or 106 supplied in tape of 5,000 units per reel is: 232279061105L or RV1206JR-071ML. NOTE 1. All our R-Chip products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Nov. 13, 2018 V.8

Product specification 4 Chip Resistor Surface Mount RV SERIES 0603/0805/1206/2010/25 12 (RoHS Compliant) 9 M ARKING RV0603/0805/1206/2010/2512 0 3 E-24 series: 3 digits, ±5% Fig. 1 Value =10 KΩ First two digits for significant figure and 3rd digit for number of zeros RV 0603 0 E-24 series: 3 digits, ±0.5% & ±1% Exception values 10/11/13/15/20/75 of E24 series Fig. 2 Value= 24Ω One short bar under marking letter E-96 series: 3 digits, ±0.5% & ±1% Including values 10/11/13/15/20/75 of E24 series Fig. 3 Value= 12.4 KΩ First two digits for E-96 marking rule and 3rd letter for number of zeros RV 0805/1206/ 2010/2512 00 Both E-24 and E-96 series: 4 digits, ±0.5% & ±1% Fig. 4 Value= 10 KΩ First three digits for significant figure and 4th digit for number of zeros For further ma rking information, please refer to data sheet “Chip resistors marking”. CO NSTRUCTION OOUUTTLLIINNEESS The resistor is constructed on top of a high-grade cer amic body. Internal metal electrodes are added on For dimension see Table 1 eac h end to make the contacts to the thick film resistive elem ent. The composition of the resistive element is a nob le metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Ni- barrier) are added. See fig.5 DIMENSIONS Table 1 For outlines see fig. 5 TYPE L (mm) W (mm) H (mm) I (mm) I (mm) 1 2 RV0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15 RV0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20 RV1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.40 ±0.20 0.45 ±0.20 RV2010 5.00±0.10 2.50±0.15 0.55±0.10 0.45±0.15 0.50±0.20 Fig. 5 Chip resistor outlines RV2512 6.35 ±0.10 3.10 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 www.yageo.com Nov. 13, 2018 V.8

Product specification 5 Chip Resistor Surface Mount RV SERIES 0603/0805/1206/2010/25 12 (RoHS Compliant) 9 ELECTRI CAL CHARACTERISTICS Table 2 CHARACTERISTICS RESISTANCE Rated Operating Max. Max. Dielectric Temperature TYPE RANGE Power Temperature Working Overload Withstanding Coefficient Range Voltage Voltage Voltage of Resistance 5% (E-24) 47Ω to 10MΩ RV0603 1% (E-24/E-96) 47Ω to 10MΩ 1/10W 350V 500V 500V 0.5% (E-24/E-96) 47Ω to 10MΩ 5% (E-24) 47Ω to 22MΩ RV0805 1% (E-24/E-96) 47Ω to 22MΩ 1/8 W 400 V 800 V 800 V 0.5% (E-24/E-96) 47Ω to 10MΩ 5% (E-24) 47Ω to 27MΩ RV1206 1% (E-24/E-96) 47Ω to 27MΩ 1/4 W –55 °C to 500 V 1,000 V 1,000 V ±200 ppm/°C +155 °C 0.5% (E-24/E-96) 47Ω to 15MΩ 5% (E-24) 47Ω to 22MΩ RV2010 1% (E-24/E-96) 47Ω to 22MΩ 3/4W 500 V 1,000 V 1,000 V 0.5% (E-24/E-96) 47Ω to 10MΩ 5% (E-24) 47Ω to 16MΩ RV2512 1% (E-24/E-96) 47Ω to 16MΩ 1 W 500 V 1,000 V 1,000 V 0.5% (E-24/E-96) 47Ω to 10MΩ FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PA CKING STYLE REEL RV0603 RV0805 RV1206 RV2010 RV2512 DIMENSION Paper/PE taping reel (R) 7" (178 mm) 5,000 5,000 5,000 --- --- Embossed taping reel (K) 7" (178 mm) --- --- --- 4,000 4,000 NOTE 1. For Paper/PE/Embossed tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”. www.yageo.com Nov. 13, 2018 V.8

Product specification 6 Chip Resistor Surface Mount RV SERIES 0603/0805/1206/2010/25 12 (RoHS Compliant) 9 FUNCTIONAL DESCRIPTION OPERATING TEMPERATURE RANGE Range: –55 °C to +155 °C POWER RATIN G Each type rated power at 70 °C: RV0603=1/10W; RV0805=1/8W; RV1206=1/4W; RV2010=3/4W; RV2512=1W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = Fig. 6 Maximum dissipation (Pm ax) in percentage of rated power or max. working voltage whichever is less as a function of the oper ating ambient temperature (Tamb) Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (Ω) Maximum working voltage can be applicable to resistors only if the resistance valu e is equal to or higher than the critical resistance value. www.yageo.com Nov. 13, 2018 V.8

Product specification 7 Chip Resistor Surface Mount RV SERIES 0603/0805/1206/2010/25 12 (RoHS Compliant) 9 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements (AEC-Q200 report available for 47ohm ≤ R < 5Mohm) TE ST TEST METHOD PROCEDURE REQUIREMENTS Life/ MIL-STD-202G-method 108A 1,000 hours at 70±5 °C applied RCWV ±(2%+0.05 Ω) Operational Lif e/ IEC 60115-1 4.25.1 1.5 hours on, 0.5 hour off, still air required Endurance JIS C 5202-7.10 High MIL-STD-202G-method 108A 1,000 hours at maximum operating temperature ±(1%+0.05 Ω) Temperature IEC 60115-1 4.25.3 depending on specification, unpowered Exposure/ JIS C 5202-7.11 No direct impingement of forced air to the parts Endurance at Tolerances: 155±3 °C upper category temperature Moisture MIL-STD-202G-method 106F Each temperature / humidity cycle is defined at 8 ±(2%+0.05 Ω) Resistance IEC 60115-1 4.24.2 hours (method 106F), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion Thermal Shock MIL-STD-202G-method 107G -55/+125 °C ±(0.5%+0.05 Ω) for 10 KΩ to Note: Number of cycles required is 300. 10 MΩ Maximum transfer time is 20 seconds. Dwell time ±(1%+0.05 Ω) for others is 15 minutes. Air – Air Short time MIL-R-55342D-para 4.7.5 2.5 times RCWV or maximum overload voltage ±(2%+0.05 Ω) overload IEC60115-1 4.13 whichever is less for 5 sec at room temperature No visible damage Board Flex/ IEC60115-1 4.33 Device mounted on PCB test board as described, ±(1%+0.05 Ω) Bending only 1 board bending required No visible damage Bending for 0603 & 0805: 3mm 1206 & above: 2mm Holding time: minimum 60 seconds Ohmic value checked during bending Humidity IEC 60115-1 4.24.8 Steady state for 1,000 hours at 40°C / 95% R.H. ±(3.0%+0.05 Ω) RCWV applied for 1.5 hours on and 0.5 hour off AEC-Q200 Test 7 for 47ohm ≤ R< 5Mohm, 1,000 hours; 85°C / ± (5.0%+0.05 Ω) MIL-STD-202 Method 103 85% RH 10% of operating power Measurement at 24 ±4 hours after test conclusion www.yageo.com Nov. 13, 2018 V.8

Product specification 8 Chip Resistor Surface Mount RV SERIES 0603/0805/1206/2010/25 12 (RoHS Compliant) 9 TEST TEST METHO D PROCEDU RE REQUIREMENTS Solderability - Wetting IPC/JEDECJ-STD-002B test B Electrical Test not required Well tinned (≥95% covered) IEC 60068-2-58 Magnification 50X No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds - Leaching IPC/JEDECJ-STD-002B test D Leadfree solder, 260 °C, 30 seconds No visible damage IEC 60068-2-58 immersion time - Resistance to MIL-STD-202G-method 210F Condition B, no pre-heat of samples ±(1%+0.05 Ω) Soldering Heat IEC 60068-2-58 Leadfree solder, 260 °C, 10 seconds No visible damage immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Nov. 13, 2018 V.8

Product specification 9 Chip Resistor Surface Mount RV SERIES 0603/0805/1206/2010/25 12 (RoHS Compliant) 9 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 8 N ov .09, 2018 - - Add AEC-Q200 for 47ohm ≤ R < 5Mohm Version 7 Jul. 06, 2017 - - Add IEC62368-1 safety certificate declaration for sizes 0603/0805/1206 Version 6 Dec. 01, 2016 - - Extend resistor value of RV1206 0.5% Version 5 Aug. 27, 2015 - - Extend resistor range and add 0.5% Version 4 Jan. 27, 2014 - - RV0603 resistance range extend to 10MΩ - Add RV2010 Version 3 Aug. 26, 2013 - - Add RV0603 Version 2 Sep 29, 2011 - - Type error correction Version 1 Nov 19, 2008 - - Change to dual brand datasheet that describes RV0805/1206/2512 with RoHS compliant - Description of "Halogen Free Epoxy" added - Define global part number Version 0 Feb 14, 2006 - - New datasheet for high voltage chip resistors sizes of 0805/1206/2512, 5%, 1% tolerance with lead-free terminations - Replace the 0805/1206/2512 parts of pdf files: VRC01_02_11_12_51_3.pdf, VPRC221_5_3.pdf, and combine into a document. - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” www.yageo.com Nov. 13, 2018 V.8