General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85°C (DC coil) n WG version: product in accordance to IEC 60335-1 n Reflow version: for THR (Through-Hole Reflow) soldering process Typical applications Boiler control, timers, garage door control, POS automation, interface F0144-C modules Z b EN60947-5-1 Approvals RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 VDE Cert. No. 40007571, cULus E214025, cCSAus 1142018; EN60730-1 CQC in preparation RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103 Technical data of approved types on request 1) For reflow solderable versions: actual contact performance may be influenced by the reflow soldering process. Contact Data 12A 16A Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Contact Data (continued) Max. switching voltage 400VAC Mechanical endurance Rated current 12A 16A DC coil >30x106 operations Limiting continuous current 12A 16A, UL: 20A AC coil >10x106 operations Limiting making current AC coil, reflow version >5x106 operations max. 4s, duty factor 10% 25A 30A Breaking capacity max. 3000VA 4000VA Contact material AgNi 90/10, AgNi 90/10 gold plated Coil Data Frequency of operation, with/without load Coil voltage range, DC coil/ AC coil 5 to 110VDC / 24 to 230VAC DC coil 360/72000h-1 Operative range, IEC 61810 2 AC coil 360/36000h-1 Coil insulation system according UL class F Operate/release time max., DC coil 8/6ms Bounce time max., DC coil, form A/form B 4/6ms Coil versions, DC coil Electrical endurance see electrical endurance graph1) Coil Rated Operate Release Coil Rated coil Contact ratings code voltage voltage voltage resistance power Type Contact Load Cycles VDC VDC VDC Ω±10%2) mW IEC 61810 005 5 3.5 0.5 62 403 RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103 006 6 4.2 0.6 90 400 RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103 009 9 6.3 0.9 200 400 RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103 012 12 8.4 1.2 360 400 RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103 018 18 12.6 1.8 770 420 RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103 020 20 14.0 2.0 952 420 UL 508 024 24 16.8 2.4 1440 400 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85°C 6x103 048 48 33.6 4.8 5520 417 RT334 A (NO) 16A, 250VAC, gen. purpose, 85°C 50x103 060 60 42.0 6.0 85702) 420 RT314 A (NO) 1hp, 240VAC, 40°C 1x103 110 110 77.0 11.0 288002) 420 RT314 A (NO) FLA/LRA, 4.5/13.1A, 480VAC, 70°C 100x103 2) Coil resistance ±12%. EN60947-4-1 All figures are given for coil without pre-energization, at ambient temperature +23°C. RT314 DC-coil A (NO) 250V/6A, AC-3 6.050 Other coil voltages on request. RT314 AC-coil A (NO) 250V/2A, AC-3 6.050 Coil versions, AC coil 50/60 Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VAC VAC VAC Ω±15%3) VA 524 24 18.0 3.6 3503) 0.76 615 115 86.3 17.3 8100 0.76 620 120 90.0 18.0 8800 0.75 700 200 150.0 30.0 24350 0.76 730 230 172.5 34.5 32500 0.74 3) Coil resistance ±10%. All figures are given for coil without pre-energization, at ambient temperature +23°C, 50 Hz. Other coil voltages on request. 1 10-2018, Rev. 1018 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2014 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 (Continued) Other Data (continued) Terminal type standard version PCB-THT, plug-in reflow version PCB-THR Mounting distance AC coil: ≥2.5mm Weight 14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270°C/10s RTIII 260°C/5s Resistance to soldering heat THR reflow soldering (for reflow version) forced gas convection 4) or vapour phase 5) temperature profile according EN61730 Insulation Data Packaging/unit tube/20 pcs., box/500 pcs. Initial dielectric strength 4) infrared heating not allowed between open contacts 1000Vrms 5) recommended fluid LS/230 between contact and coil 5000Vrms Clearance/creepage Accessories between contact and coil ≥10/10mm For details see datasheet Accessories Industrial Power Relay RT Material group of insulation parts IIIa NOTE: indicated contact ratings and electrical endurance data for direct Tracking index of relay base PTI 250V wiring of relays (according IEC 61810-1); for relays mounted on sockets reflow version PTI 175V deratings may apply. Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire WG version or Reflow version according EN60335, par30 Ambient temperature DC coil -40 to 85°C AC coil -40 to 70°C Category of environmental protection, IEC 61810 standard version RTII - flux proof, RTIII - wash tight reflow version RTII - flux proof Vibration resistance (functional) form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g PCB layout / terminal assignment *) With the recommended PCB hole sizes a grid Bottom view on solder pins pattern from 2.5 mm to 2.54 mm can be used. 12 A, pinning 3.5 mm 12 A, pinning 5 mm 16 A, pinning 5 mm S0418-CB S0418-CN S0418-CA 1 form C (CO) contact 1 form C (CO) contact 1 form C (CO) contact S0163-BG S0163-BC S0163-BE 1 form A (NO) contact 1 form A (NO) contact 1 form A (NO) contact S0163-BH S0163-BD S0163-BF 2 10-2018, Rev. 1018 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2014 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 (Continued) Dimensions THT version THR version (reflow solderable) S0272-BB S0272-BRB Process conditions for Reflow soldering according to EN61760-1 Product code structure Typical product code RT 3 1 4 024 Type RT Power PCB Relay RT1 Version 1 12A, pinning 3.5mm, flux proof 2 12A, pinning 5mm, flux proof *) 3 16A, pinning 5mm, flux proof B 12A, pinning 3.5mm, wash tight D 16A, pinning 5mm, wash tight Contact arrangement 1 1 form C (CO) contact 3 1 form A (NO) contact Contact material 4 AgNi 90/10 5 AgNi 90/10 gold plated (for type RT31.) Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) R Reflow solderable *) Wash tight version on request 3 10-2018, Rev. 1018 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2014 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 (Continued) Product code Version Contacts Contact material Coil Version Part number RT114009 12A, pinning 3.5mm, 1 form C (CO) AgNi 90/10 9VDC Standard 1393239-9 RT114012 flux proof contact 12VDC 1419108-1 RT114012WG IEC60335-1 compliant 7-1415538-6 RT114024 24VDC Standard 1-1393239-3 RT114024WG IEC60335-1 compliant 1415539-4 RT114730 230VAC Standard 1-1393239-9 RT115024 AgNi 90/10 gold pl. 24VDC 2-1393239-1 RT134012 1 form A (NO) AgNi 90/10 12VDC 2-1393239-6 RT134024 contact 24VDC 3-1393239-0 RT214012 12A, pinning 5mm, 1 form C (CO) 12VDC 5-1393239-4 RT214024 flux proof contact 24VDC 5-1393239-5 RT214524 24VAC 5-1393239-9 RT214730 230VAC 1419108-6 RT314005 16A, pinning 5mm, 5VDC 9-1393239-1 RT314006 flux proof 6VDC 9-1393239-3 RT314012 12VDC 9-1393239-5 RT314012WG IEC60335-1 compliant 8-1415535-6 RT314018 18VDC Standard 9-1393239-7 RT314024 24VDC 9-1393239-8 RT314024WG IEC60335-1 compliant 1415538-7 RT314048 48VDC Standard 1393240-1 RT314524 24VAC 1393240-4 RT314548 48VAC 1393240-5 RT314730 230VAC 1393240-7 RT315024 AgNi 90/10 gold pl. 24VDC 1-1393240-4 RT334009WG 1 form A (NO) AgNi 90/10 9VDC IEC60335-1 compliant 3-1415538-1 RT334012 contact 12VDC Standard 4-1393240-5 RT334012WG IEC60335-1 compliant 1-1415527-1 RT334024 24VDC Standard 4-1393240-8 RT334048 48VDC 5-1393240-0 RTB14005 12A, pinning 3.5mm, 1 form C (CO) 5VDC 1-1393238-2 RTB14012 wash tight contact 12VDC 1-1393238-5 RTB14024 24VDC 1-1393238-9 RTB14524 24VAC 2-1393238-4 RTD14005 16A, pinning 5mm, 5VDC 5-1393238-9 RTD14012 wash tight 12VDC 6-1393238-2 RTD14024 24VDC 6-1393238-8 RTD14048 48VDC 6-1393238-9 4 10-2018, Rev. 1018 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2014 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions