General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact n Sensitive coil 400mW n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85°C Typical applications Boiler control, timers, garage door control, POS automation, interface modules V Z b Approvals Contact Data (continued) VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Technical data of approved types on request Contact ratings Type Load Cycles Contact Data 12A 16A RT3, RTD 1 HP @ 480VAC* motor 6x103 Contact arrangement 1 form C (CO) or 1 form A (NO) RT3, RTD 1 HP @ 240VAC* motor 6x103 Rated voltage 250VAC RT3, RTD 1/2 HP @ 120VAC* motor 6x103 Max. switching voltage 400VAC RT3, RTD 60 LRA/10 FLA @ 250VAC* motor 30x103 Rated current 12A 16A RT3, RTD TV-5 @ 120VAC* Tungsten 25x103 Limiting continuous current 12A 16A, UL: 20A RT3, RTD A300, 720VA @ 240VAC* Pilot Duty 30x103 Limiting making current RT3, RTD B300, 360VA @ 240VAC** Pilot Duty 30x103 max. 4s, duty factor 10% 25A 30A *) form A (NO) contact only, **) form B (NC) contact only Breaking capacity max. 3000VA 4000VA Contact Material AgNi 90/10 Mechanical endurance >30x106 operations Frequency of operation, with/without load 360/72000h-1 Operate/release time max., DC coil 8/6ms Bounce time max., DC coil, form A/form B 4/6ms Coil Data Coil voltage range 5 to 110VDC Contact ratings Operative range, IEC 61810 2 Type Contact Load Cycles Coil insulation system according UL class F IEC 61810 RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103 Coil versions, DC coil RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103 Coil Rated Operate Release Coil Rated coil RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103 code voltage voltage voltage resistance power RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103 VDC VDC VDC Ω±10% mW RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103 005 5 3.5 0.5 62 403 UL 508 006 6 4.2 0.6 90 400 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85°C 6x103 009 9 6.3 0.9 200 400 RT334 A (NO) 16A, 250VAC, gen. purpose, 85°C 50x103 012 12 8.4 1.2 360 400 RT314 A (NO) 1hp, 240VAC, 40°C 1x103 024 24 16.8 2.4 1440 400 EN60947-5-1 048 48 33.6 4.8 5520 417 RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 All figures are given for coil without pre-energization, at ambient temperature +23°C. EN60730-1 Other coil voltages on request. RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103 1 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 (Continued) Insulation Data Other Data (contiinued) Initial dielectric strength Terminal type PCB-THT, plug-in between open contacts 1000Vrms Weight 14g between contact and coil 5000Vrms Resistance to soldering heat THT, IEC 60068-2-20 Clearance/creepage RTII 270°C/10s between contact and coil ≥10/10mm RTIII 260°C/5s Material group of insulation parts IIIa Packaging/unit tube/20 pcs., box/500 pcs. Tracking index of relay base PTI 250V Accessories Other Data For details see datasheet Accessories Industrial Power Relay RT Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays refer to the Product Compliance Support Center at (according IEC 61810-1); for relays mounted on sockets deratings may apply. www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85°C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional) form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g Dimensions S0272-BB PCB layout / terminal assignment *) With the recommended PCB hole sizes a grid Bottom view on solder pins pattern from 2.5 mm to 2.54 mm can be used. 12 A, pinning 3.5 mm 12 A, pinning 5 mm 16 A, pinning 5 mm S0418-CB S0418-CN S0418-CA 1 form C (CO) contact 1 form C (CO) contact 1 form C (CO) contact S0163-BG S0163-BC S0163-BE 1 form A (NO) contact 1 form A (NO) contact 1 form A (NO) contact S0163-BH S0163-BD S0163-BF 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 (Continued) Product code structure Typical product code RT 3 1 4 024 F Type RT Power PCB Relay RT1 Version 1 12A, pinning 3.5mm, flux proof 2 12A, pinning 5mm, flux proof *) 3 16A, pinning 5mm, flux proof B 12A, pinning 3.5mm, wash tight D 16A, pinning 5mm, wash tight Contact arrangement 1 1 form C (CO) contact 3 1 form A (NO) contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version F Standard version Product code Version Contacts Contact material Coil Part number RT114012F 12A, pinning 3.5mm, 1 form C (CO) AgNi 90/10 12VDC 1419108-2 RT114024F flux proof contact 24VDC 1419108-3 RT134012F 1 form A (NO) 12VDC 5-1415020-1 RT134024F contact 24VDC 2-1393242-1 RT314005F 16A, pinning 5mm, 1 form C (CO) 5VDC 1419108-8 RT314012F flux proof contact 12VDC 2-1393237-2 RT314024F 24VDC 2-1393237-3 RT334012F 1 form A (NO) 12VDC 2-1393237-5 RT334024F contact 24VDC 2-1393237-7 RTB14005F 12A, pinning 3.5mm, 1 form C (CO) 5VDC 2-1419108-4 RTB14012F wash tight contact 12VDC 2-1419108-5 RTB14024F 24VDC 2-1419108-6 RTB34012F 1 form A (NO) 12VDC 2-1419108-7 RTD14005F 16A, pinning 3.5mm, 1 form C (CO) 5VDC 2-1419108-8 RTD14012F wash tight contact 12VDC 2-1419108-9 RTD14024F 24VDC 3-1419108-1 RTD34012F 1 form A (NO) 12VDC 3-1419108-6 RTD34024F contact 24VDC 3-1419108-9 This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 3 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T E Connectivity: RTD14012F