SMD High Power Precision Resistors Type RP73 Series Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating voltage Terminal finish – electroplated 100% matte Sn Applications Communications The RP73 resistor series is a stable thin film chip resistor range offering Industrial Controls increased power dissipation, higher temperature capabilities and increased working voltages compared to the standard RN73 series. The resistor is Instrumentation produced by sputtering a metal film onto high grade alumina and protecting with three complete printed layers. Values are normally offered in E96 and Medical E24 series. The RP73 resistor has accurate and uniform physical dimensions to reduce placement problems. Electrical Characteristics RP73 series 0402 Rated Power @ 0.063W 70°C Resistance Min 49R9 49R9 49R9 49R9 49R9 10R 49R9 49R9 49R9 4R7 range Ω Max 4K99 12K 4K99 60K 69K8 255K 4K99 60K 69K8 511K Tolerance (%) 0.05 0.1 0.5 / 1 Code Letter A B D / F TCR (PPM / °C) 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 Code Letter A C D F G A C D F G A C D F G Selection series E24 & E96 Max. operating 25V voltage Max overload 50V voltage Operating temperature -55 ~ +155°C range Insulation >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ resistance Stability 0.5% 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors 0603 Rated Power @ 0.1W 70°C Resistance Min 24R9 4R7 24R9 4R7 4R7 24R9 4R7 4R7 range Ω Max 15K 332K 15K 332K 1M0 15K 332K 1M0 Tolerance (%) 0.05 0.1 0.5 / 1 Code Letter A B D / F TCR (PPM / °C) 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 Code Letter A C D F G A C D F G A C D F G Selection series E24 & E96 Max. operating 75V voltage Max overload 150V voltage Operating temperature -55 ~ +155°C range Insulation >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ resistance Stability 0.5% 0805 Rated Power @ 0.125W 70°C Resistance Min 24R9 4R7 24R9 4R7 4R7 4R7 24R9 4R7 4R7 1R0 range Ω Max 30K 511K 30K 511K 1M0 1M0 30K 511K 1M0 1M0 Tolerance (%) 0.05 0.1 0.5 / 1 Code Letter A B D / F TCR (PPM / °C) 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 Code Letter A C D F G A C D F G A C D F G Selection series E24 & E96 Max. operating 150V voltage Max overload 300V voltage Operating temperature -55 ~ +155°C range Insulation >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ resistance Stability 0.5% 1206 Rated Power @ 0.25W 70°C Resistance Min 24R9 4R7 24R9 4R7 24R9 4R7 range Ω Max 49K9 1M0 49K9 1M0 49K9 1M0 Tolerance (%) 0.05 0.1 0.5 / 1 Code Letter A B D / F TCR (PPM / °C) 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 Code Letter A C D F G A C D F G A C D F G Selection series E24 & E96 Max. operating 200V voltage Max overload 400V voltage Operating temperature -55 ~ +155°C range Insulation >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ resistance Stability 0.5% 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors 1210 Rated Power @ 0.33W 70°C Resistance Min 24R9 4R7 24R9 4R7 24R9 4R7 range Ω Max 49K9 1M0 49K9 1M0 49K9 1M0 Tolerance (%) 0.05 0.1 0.5 / 1 Code Letter A B D / F TCR (PPM / °C) 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 Code Letter A C D F G A C D F G A C D F G Selection series E24 & E96 Max. operating 200V voltage Max overload 400V voltage Operating temperature -55 ~ +155°C range Insulation >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ resistance Stability 0.5% 2010 Rated Power @ 0.33W 70°C Resistance Min 24R9 4R7 24R9 4R7 24R9 4R7 range Ω Max 49K9 1M0 49K9 1M0 49K9 1M0 Tolerance (%) 0.05 0.1 0.5 / 1 Code Letter A B D / F TCR (PPM / °C) 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 Code Letter A C D F G A C D F G A C D F G Selection series E24 & E96 Max. operating 200V voltage Max overload 400V voltage Operating temperature -55 ~ +155°C range Insulation >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ resistance Stability 0.5% 2512 Rated Power @ 70°C 1.0W Resistance Min 4R7 1R0 1R0 range Ω Max 100R 100R 100R Tolerance (%) 0.1 0.5 1.0 Code Letter B D F TCR (PPM / °C) 25 50 25 50 25 50 Code Letter F G F G F G Selection series E24 & E96 Max. operating voltage 200V Max overload voltage 400V Operating temperature range -55 ~ +155°C Insulation resistance >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ Stability 0.5% Operating Voltage=√(cid:894)P*R(cid:895) or Max. operating voltage listed above, whichever is lower. O(cid:448)erload Voltage=(cid:1006).(cid:1009)*√(cid:894)P*R(cid:895) or Max. o(cid:448)erload (cid:448)oltage listed a(cid:271)o(cid:448)e, (cid:449)hi(cid:272)he(cid:448)er is lo(cid:449)er. 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors Electrical Characteristics RP73P series – High Power 0402 Rated Power @ 70°C 0.1W Resistance Min 10R 4R7 4R7 range Ω Max 255K 255K 255K Tolerance (%) 0.1 0.5 1.0 Code Letter B D F TCR (PPM / °C) 25 50 25 50 25 50 Code Letter F G F G F G Selection series E24 & E96 Max. operating voltage 50V Max overload voltage 100V Operating temperature range -55 ~ +155°C Insulation resistance >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ Stability 0.5% 0603 Rated Power @ 70°C 0.166W Resistance Min 10R 10R 10R range Ω Max 332K 332K 332K Tolerance (%) 0.1 0.5 1.0 Code Letter B D F TCR (PPM / °C) 25 50 25 50 25 50 Code Letter F G F G F G Selection series E24 & E96 Max. operating voltage 100V Max overload voltage 150V Operating temperature range -55 ~ +155°C Insulation resistance >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ Stability 0.5% 0805 Rated Power @ 70°C 0.25W Resistance Min 10R 10R 10R range Ω Max 499K 499K 499K Tolerance (%) 0.1 0.5 1.0 Code Letter B D F TCR (PPM / °C) 25 50 25 50 25 50 Code Letter F G F G F G Selection series E24 & E96 Max. operating voltage 150V Max overload voltage 300V Operating temperature range -55 ~ +155°C Insulation resistance >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ Stability 0.5% 1206 Rated Power @ 70°C 0.33W Resistance Min 10R 10R 10R range Ω Max 1M0 1M0 1M0 Tolerance (%) 0.1 0.5 1.0 Code Letter B D F TCR (PPM / °C) 25 50 25 50 25 50 Code Letter F G F G F G Selection series E24 & E96 Max. operating voltage 200V Max overload voltage 400V Operating temperature range -55 ~ +155°C Insulation resistance >(cid:1005)(cid:1004)(cid:1004)(cid:1004)MΩ Stability 0.5% 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors Operating Voltage=√(cid:894)P*R(cid:895) or Max. operating (cid:448)oltage listed a(cid:271)o(cid:448)e, (cid:449)hi(cid:272)he(cid:448)er is lo(cid:449)er. Overload Voltage=(cid:1006).(cid:1009)*√(cid:894)P*R(cid:895) or Max. o(cid:448)erload (cid:448)oltage listed a(cid:271)o(cid:448)e, (cid:449)hi(cid:272)he(cid:448)er is lo(cid:449)er. Environmental Characteristics Requirement Item Test Method Tol. ≤(cid:1004).(cid:1004)(cid:1009)% TOL. >0.05% Temperature Coefficient As per TCRs specified in Electrical Characteristics MIL-STD-202 Method 304 of Resistance (TCR) tables +25/-55/+25/+125/+25°C JIS-C-5201-1 5.5 Short Time Overload ΔR±0.2% ΔR±0.2% RCWV*2.5 or Max. overload voltage whichever is lower for 5 seconds MIL-STD-202 Method 302 Insulation Resistance >(cid:1005)(cid:1004)(cid:1004)(cid:1004) MΩ Apply 100VDC for 1 minute MIL-STD-202 Method 108A Endurance ΔR±0.5% 70±2°C, RCWV for 1000 hrs with 1.5 hrs (cid:862)ON(cid:863) and (cid:1004).(cid:1009) hrs (cid:862)OFF(cid:863) MIL-STD-202 Method 103B Damp Heat with Load ΔR±(cid:1004).5% ΔR±(cid:1004).(cid:1009)% 40±2°C, 90~95% R.H. RCWV for 1000 hrs with 1.5 hrs (cid:862)ON(cid:863) and (cid:1004).(cid:1009) hrs (cid:862)OFF(cid:863) JIS-C-5201-1 6.1.4 Bending Strength ΔR±(cid:1004).(cid:1004)(cid:1009)% ΔR±(cid:1004).(cid:1006)% Bending amplitude 3 mm for 10 seconds MIL-STD-202 Method 208H Solderability 95% min. coverage 245±5°C for 3 seconds Resistance to Soldering MIL-STD-202 Method 210E ΔR±(cid:1004).(cid:1004)(cid:1009)% ΔR±(cid:1004).(cid:1006)% Heat 260±5°C for 10 seconds Dielectric Withstand MIL-STD-202 Method 301 By Type Voltage Max. overload voltage for 1 minute MIL-STD-202 Method 107G Thermal Shock ΔR±(cid:1004).(cid:1004)(cid:1009)% ΔR±(cid:1004).(cid:1006)(cid:1009)% -55°C ~150°C, 100 cycles JIS-C-5201-1 7.1 Low Temperature ΔR±(cid:1004).5% ΔR±(cid:1004).(cid:1009)% 1 hour, -65°C, followed by 45 minutes of Operation RCWV Storage Temperature: 25±3°C; Humidity < 80%RH Derating Curve 100 %) 80 o( ati 60 er r 40 w o P 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors Construction and dimensions L D1 W    T  D2       Alumina Substrate  Edge Electrode (NiCr)  Resistor Layer (NiCr)  Bottom Electrode (Ag)  Barrier Layer (Ni)  Overcoat (Epoxy)  Top Electrode ( Ag)  External Electrode (Sn)  Marking Size L (mm) W (mm) T (mm) D1 (mm) D2 (mm) Weight (g) (1000 Pcs.) 0402 1.00±0.05 0.50±0.05 0.30±0.05 0.20±0.10 0.20±0.10 0.54 0603 1.55±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 1.83 0805 2.00±0.15 1.25±0.15 0.55±0.10 0.30±0.20 0.40±0.20 4.71 1206 3.05±0.15 1.55±0.15 0.55±0.10 0.42±0.20 0.35±0.25 9.02 1210 3.10±0.15 2.40±0.15 0.55±0.10 0.40±0.20 0.55±0.25 10 2010 4.90±0.15 2.40±0.15 0.55±0.10 0.60±0.30 0.50±0.25 23.61 2512 6.30±0.15 3.10±0.15 0.55±0.10 0.60±0.30 0.50±0.25 38.06 Suggested PCB Layout Plan Recommended Land Pattern Size A B C 0402 0.50 0.50 0.60±0.2 0603 0.80 1.00 0.90±0.2 0805 1.00 1.00 1.35±0.2 1206 2.00 1.15 1.70±0.2 1210 2.00 1.15 2.50±0.2 2010 3.60 1.40 2.50±0.2 2512 4.90 1.60 3.10±0.2 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors Marking Case sizes 0805 to 2512 IEC 4 Digit Marking: Resistance (cid:1005)(cid:1004)(cid:1004)R (cid:894)(cid:1005)(cid:1004)(cid:1004)Ω(cid:895) (cid:1006)K(cid:1006) (cid:894)(cid:1006).(cid:1006)kΩ(cid:895) (cid:1005)(cid:1004)K (cid:894)(cid:1005)(cid:1004)kΩ(cid:895) (cid:1008)99K (cid:894)(cid:1008)99kΩ(cid:895) (cid:1005)(cid:1004)(cid:1004)K (cid:894)(cid:1005)(cid:1004)(cid:1004)kΩ(cid:895) Code 1000 2201 1002 4992 1003 Case Size 0603 E24 3 digit marking – Example 101 = 100R 102=1K0 E24 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 Case size 0603 E96 3 digit marking – Examples 14C = 13K7 68B = 4K99 68X = 49R9 Code E96 Code E96 Code E96 Code E96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 Code A B C D E F G H X Y Z Multiplier (cid:1005)(cid:1004)⁰ 10¹ 10² 10³ (cid:1005)(cid:1004)(cid:1018) (cid:1005)(cid:1004)(cid:1019) (cid:1005)(cid:1004)(cid:1020) (cid:1005)(cid:1004)(cid:1021) (cid:1005)(cid:1004)⁻¹ (cid:1005)(cid:1004)⁻(cid:1016) (cid:1005)(cid:1004)⁻(cid:1017) NB for 0603 size values other than E24 and E96 will be supplied unmarked Case sizes smaller than 0603 will be supplied unmarked 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors P ackaging Packing Quantity and Reel Specification Size ØA ±1.0 ØB ±1.0 ØC ±0.7 W ±1.0 T ±1.0 Paper Tape Embossed Plastic Tape 0402 0603 0805 9.5 11.5 1000 / 5000 N/A 1206 178.0 60.0 13.5 1210 2010 13.5 15.5 N/A 4000 2512 Paper tape Specification Size A ±0.05 B ±0.05 W E F ±0.05 P(cid:1029) P(cid:1030) P(cid:1031) ±(cid:1004).(cid:1004)(cid:1009) ØD(cid:1029) T ±0.10 ±0.05 2.00 0.40 0402 0.70 1.16 ±0.05 ±0.03 0.60 0603 1.10 1.90 4.00 ±0.10 1.55 ±0.05 8.00 1.75 3.5 2.00 ±0.03 4.00 0805 1.60 2.37 ±0.10 0.75 1206 2.00 3.55 ±0.05 1210 2.75 3.40 4.00 ±0.05 1.60 ±0.10 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 8gf to 60gf Embossed Plastic Tape Specifications Top Tape ψ D0 E A F W B ψ D1 1.4Min. T P1 P2 P0 direction of unreeling Resistor Emboss Tape Type A B W E F P0 P1 P2 ØD0 T 2010 2.85±0.10 5.45±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 2512 3.40±0.10 6.65±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 20gf to 80g 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change

SMD High Power Precision Resistors R eflow Solder Profile Reel dimension (mm) Time of Reflow soldering at maximum temperature point 260°C = 10s Wave Solder Profile Qty / Reel A ±0.5 B ±0.5 C ±0.5 D ±1 M ±2 W ±1 2000 2 13.5 21 60 178 13.8 Handling Recommendations When flow soldering - the land width must be smaller than the Chip Resistor width to properly control the solder application. Generally, the land width can be Chip Resistor width (W) x 0.7 to 0.8. When ref low soldering – solder Tiampep loicf aWtiaovne asomldoeurnintg c aatn m baex iamdujums tteemd.p Tehrautsu treh ep olainntd 2 w60id°Ct h= c1a0ns be set to W x Time of Soldering Iron at maximum temperature point 410°C = 5s 1.0 to 1.3. How To Order How To Order RP73 C 2A 100R B TD 3521 1K0 F T Common TCR Package Value Tolerance Packaging Common Part Resistance Value Tolerance Pack Style Part Size RP73 – A -± 5ppm/°C 1E - 0402 1 ohm100 R1 R0 A - ±0 .05% TG – 250 cut tape Standard 1J – 0603 (cid:894)(cid:1005)(cid:1004) (cid:1004)Ω(cid:895) length C - ±10ppm/°C 2A – 0805 B - ±0.1% (1E, 1J, 2A, 2B) RP73P – 2B – 1206 1K ohm 110K00 0 ohms High Power D - ±15PPM3 521 2E – 1210 (cid:894)1(cid:1005)(cid:1004)K(cid:1004)0(cid:1004)Ω (cid:895) D - ±F0 .–5% 1 % TDFT –– 1 020000 re0e l 2H – 2010 (1E, 1J, 2A, 2B) J – 5% reel F - ±25PPM 3A - 2512 100K F - ±1.0% 1 M(1e0g0 ,o00h0m TD – 5000 reel G - ±50PPM 100000Ω0(cid:895) ohms (1E, 1J, 2A, 2B, 2E) 1M0 TE – 4000 reel (2H, 3A only 1773272 CIS WR 02/2017 Dimensions in Dimensions Shown for For Email, phone or live chat, millimetres unless reference purposes only. go to: www.te.com/help otherwise specified Specifications subject to change