Plastic Push-Pull Lock Connectors RP13 Series Features 1. Superior mating operability (cid:129)A secure mating condition is achieved by simply pushing the plug on to the receptacle; Pull back on the locking sleeve to easily un-mate the connector. (cid:129)Index marks are provided on the plug for easy mating alignment. (cid:129)Our proprietary guide keys aid with making a correct mating orientation in blind or low light conditions. 2. Light weight and robust design d. The strong outer shell is made of glass-reinforced polycarbonate e v resin, producing light but durable connectors. r e s 3. Available in an anti-static version e R s The anti-static version connects the plug and receptacle housing ht together in such a way that the surrounding shield guards against g Ri the effects of static electricity. All 4. Variation D. Items T L Number of contacts 13, 15, 20 O., Connector type Plug and jack: Straight, Receptacle: Straight, right angle C Plug termination type Crimp C Receptacle termination type Crimp, PCB dip RI Receptacle mounting style Flange, jam nut T C Product Specifi cations E L E Rated Standard type : 2A (when using a wire of at least 24 AWG) Operating E current Anti-static type : 2A (when using a wire of at least 22 AWG) temperature range −10 to +60ç S Ratings O Rated For 13 and 15 contact positions : AC 30V, DC 42V Storage R −10 to +60ç HI voltage 20 contacts : AC 100V, DC 140V temperature range 8 Items Specifi cations Conditions 1 0 2 1. Contact For 13 and 15 contact positions : 15mø max. ht resistance 20 contacts : 30mø max. Measured at DC 1A g yri 2. Insulation 1,000Mø min. Measured at DC 250V p resistance o C 3. Withstanding 8 voltage No fl ashover or dielectric breakdown. AC 300V for 1 minute 1 0 4. Vibration 10 to 55Hz/cycle, amplitude : 0.75mm, 3 axis 2 No electrical discontinuity for 10µs or greater. 1. resistance directions, 2 hours each c. 5. Shock Acceleration : 490m/s2, duration : 11ms, e No electrical discontinuity for 10µs or greater. D resistance 3 axis directions, 3 cycles each Contact resistance : 6. Mating cycles For 13 and 15 contact positions : 20mø max. 1,000 times For 20 contact positions : 45mø max. -55ç : 30 minutes ➝ Normal temperature : 10 to 7. Temperature Insulation resistance : 100Mø min. 15 minutes ➝ 85ç : 30 minutes ➝ Normal cycle temperature : 10 to 15 minutes, leave total 5 cycles 8. Moisture Insulation resistance : 10Mø min. (at high humidity) Temperature : 40ç, relative humidity : 90 to 95%, resistance 100Mø min. (when dry) leave 96 hours Materials / Finish Items Material Finish Remarks Exterior, insulator Polycarbonate resin -------------- UL94V-0 Plug Clamp Brass -------------- -------------- Bushing Vinyl chloride resin -------------- -------------- Polycarbonate resin -------------- UL94V-0 Exterior, insulator Steel Nickel plating Receptacle Female contact Phosphor bronze -------------- Silver plating Male contact Brass Crimp contact Female contact -------------- Phosphor bronze Silver plating, gold plating Crimp contact Male contact -------------- Ipnl ecaassee sc ownhtaecret ath ceo ampppalincya trieopnr ewsielln dteamtivaen fdo ar fhuirgthh eler vineflo orfm raetliiaobni.lity, such as automotive, 2018.7w 1

RP13 Series●Plastic Push-Pull Lock Connectors ■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Plug RP13A - 12 P A - 13 S C (01) qModel name : RP13A Series yContact form wShell size : T he shell size is the outer diameter of the mating S : Female contact end of the plug. P : Male contact d. eShell type uContact termination type: e P : Straight plug A : Straight, PCB dip v r e R : Receptacle B : Right-angle, PCB dip s e J : Jack C : Contact termination by crimping R ghts rShell variation : Ci f oan vnaerciatotirosn a isre m daisdtein gwuitihsihne tdh eb ys eAr,i eBs,. or C iOther specifi cations : A two-digit character is added to Ri indicate other specifi cations as needed. All tNumber of contacts D. T Crimp contact L O., RP13A - SC - 2 1 1 C C RI T C q Model name : I ndicates the series name. !1Barrel form : E L RP13, RP13A, RP19 RP13, RP13A 1 : For 18 to 22 AWG E E o Contact type : 2 : For 24 to 28 AWG S RP19 1 : For 18 to 22 AWG O SC : Socket type crimp contact (female) 2 : For 24 to 30 AWG R PC : Pin type crimp contact (male) HI 8 !0 Contact form : !2 Identifi cation of plating : 1 1 : Gold plating 0 1 : Loose piece contacts 2 2 : Silver plating ht 2 : Reel contacts g ri y p o C 8 1 0 2 1. c. e D 2

RP13 Series●Plastic Push-Pull Lock Connectors Standard type Standard plug Ａ n) o Ｂ nsi e m di m Ｃ u Ø m 16.9 Mini Ø ( (Representative example.) RP13A-12PA-13SC(71) d. e v er Part No. HRS No. No. of contacts A B ØC Weight Part No. HRS No. No. of contacts A B ØC Weight s e RP13A-12PA-13SC(71) 113-0182-4 71 6.1 RP13A-12PD-20SC(71) 113-0214-9 71 6.1 R 47.2 32 52.2 37 s RP13A-12PB-13SC(31) 113-0184-0 31 5.7 RP13A-12PG-20SC(71) 113-0210-8 71 7.5 ght RRPP1133AA--1122PPDE--1133SSCC((7711)) 111133--00128061--57 7711 13 5427..22 3372 66..14 RRPP1133AA--1122PPHK--2200SSCC((7711)) 111133--01201172--70 7711 20 47.2 32 67..41 6.0g Ri 52.2 37 All RRPP1133AA--1122PPKS--1133SSCC((7711)) 111133--11000266--74 7711 78..11 6.0g R(PN1o3teA)- 1 C 2aPbSle-2 c0lSaCm(7p1in)g,1 c1a3-b1l0e2 2ro-3ta 7t1ion, and other forces 8m.1ay vary D. RP13A-12PD-15SC(71) 113-0206-0 71 52.2 37 6.1 with the cable construction. Please make sure that your cable T L RP13A-12PK-15SC(71) 113-0219-2 71 15 7.1 is suitable for use with these connectors before usage and O., RP13A-12PP-15SC(71) 113-1010-4 71 7.5 production. C C Receptacle (Flange type) RI T (Crimp type) C E L E Ａ E 3.2 10 S 25 RO 20 HI 018 Ø14.3 １３１２ １３ 2-Ｂ ht 2 Pmreetsasl -fflaittnegde Ø19 (flHaonlgee i sp othrtrieoand)ed on metal rig 45 ° y p o RP13A-12RA-13PC(71) (Representative example.) C 18 Part No. HRS No. No. of contacts A B Weight 0 2 RP13A-12RA-13PC(71) 113-0183-7 71 13 1. RP13A-12RA-15PC(71) 113-0207-3 71 15 18.1 M2.6×0.45 4.0g c. e RP13A-12RA-20PC(71) 113-0215-1 71 20 16 D (Remarks) See page 5 for details on mounting hole dimensions. (Dip type ) Ａ 18.1 3.2 10 Ｂ 25 20 3 4. １２ １ Ø1 １３ ３ 2-M2.6×0.45 0.5×0.3 Ø19 (Hole is threaded on (Dip post diameter) metal flange portion) Press-fitted metal flange 45° RP13A-12RA-13PA(71) (Representative example.) Part No. HRS No. No. of contacts A B Weight RP13A-12RA-13PA(71) 113-0202-0 71 13 21.5 3 5.0g RP13A-12RA-15PA(71) 113-1002-6 71 15 (Remarks) See page 5 for details on mounting dimensions and page 7 for details on dip post arrangement sizes. 3

RP13 Series●Plastic Push-Pull Lock Connectors Receptacle (Jam nut to be fastened) (Dip type) Ａ 18.1 1 9 Ｂ 4.3 １２ １ Ø1 １３ ３ 0.5×0.3 (Dip post diameter) M12×1 RP13A-12RB-13PA(71) d. e erv Part No. HRS No. A B No. of Weight s contacts e R RP13A-12RB-13PA(71) 113-0203-2 71 21.5 3 13 3.5g s ht (Remarks) S ee page 5 for details on mounting hole dimensions and page 7 for details on dip post arrangement sizes. g Ri All Right-angle, dip type D. Ｅ T 1 O., L 18 4×R1 (Note) P1a.5nmelm th mickanxe.ss: C e C or LECTRI Ａ Ｂ ４２０ １１７ Note)Ø15 mm or m Ø14.3 Ｆ E ( E Ｃ 3.5 S (Center of the screw hole O RP13A-12RC-20PB Dip post diameter for mounting the connector) R HI (Note) The mounting panel thickness should be 1.5mm or less. Mounting 8 hole should be Ø15 mm or more. 1 0 2 No. of ht Part No. HRS No. contacts A B C ØD E F Weight g yri RP13A-12RC-13PB 113-1020-8 13 17.5 8.5 3.5 0.64 23.5 13 4.0g p o RP13A-12RC-20PB 113-0211-0 20 19.5 10.5 3 0.6 31.5 15 5.0g C 8 (Remarks) See page 7 for details on dip post arrangement sizes. 1 0 2 1. Jack c. e D Ａ n) o si Ｂ n e m di m u Ｃ m 9 Ø ni 6. Mi Ø1 ( (Representative example.) RP13A-12J-13PC(71) No. of Part No. HRS No. A B ØC Weight contacts RP13A-12J-13PC(71) 113-0166-8 71 13 49.1 34.6 6.1 RP13A-12JD-15PC(71) 113-1005-4 71 15 54.1 39.6 4.5g RP13A-12JK-15PC(71) 113-0218-0 71 7.1 RP13A-12JG-20PC(71) 113-1004-1 71 20 52.6 37.4 7.4 (Note) Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is suitable for use with these connectors before usage and production. 4

RP13 Series●Plastic Push-Pull Lock Connectors Contact Panel mounting hole (Male contact) Ａ-Ａ dimensions Ａ Ｅ Ｂ 45°±30′ Ａ ＋0.05 ＋0.2 Ｄ Ｃ 3.1　0 2×Ø2.8　0 (Representative example.) 5 0 For 13 and 15 contact positions 0.＋0　 5 7. Type Part No. HRS No. Plating B C D E Applicable Ø14.4　＋00.05 wire size Loose piece RP13-PC-122 113-0179-0 Silver plating ±0.05 contacts 20 ed. RP13-PC-221 113-0360-0 Partial gold 1.2 1.35 13.9 1.4 24 to 28 AWG rv Reel contacts plating se RP13-PC-222 113-0141-7 Silver plating (Flange type) e R 13 contact position for super-thick wires (available for contact position numbers 12 and 13 only) Applicable connector s ght Type Part No. HRS No. Plating B C D E Applicable Part No. HRS No. Ri wire size RP13A-12RA-13PC(71) 113-0183-7 71 All Loose piece RP13-PC-112 113-0178-7 RP13A-12RA-13PA(71) 113-0202-0 71 D. contacts Silver plating 1.6 2.1 13.9 1.4 18 to 22 AWG T Reel contacts RP13-PC-212 113-0140-4 RP13A-12RA-15PC(71) 113-0207-3 71 L O., RP13A-12RA-15PA(71) 113-1002-6 71 C For 20 contact positions RP13A-12RA-20PC(71) 113-0215-1 71 C RI Type Part No. HRS No. Plating B C D E Applicable wire size T C Loose piece LE contacts RP19-PC-122 113-0268-8 Silver plating 1.2 1.35 12 1.18 24 to 30 AWG E Reel contacts RP19-PC-222 113-0264-7 SE 0.1 ＋0　 O (Female contact) 1 R 7. HI Ａ-Ａ ＋0.1 8 Ａ Ø12.1 　0 1 0 Ｅ Ｂ 2 ht Ａ Ø1 g 3. pyri Ｄ Ｃ 8　0＋0.1 o C (The form shown above represents an example.) 8 For 13 and 15 contact positions (Jam nut to be tightened) 1 0 1.2 Type Part No. HRS No. Plating B C D E Awpipreli csaizbele Applicable connector ec. Loose piece RP13A-SC-121113-0363-9 Partial gold plating Part No. HRS No. D contacts RP13A-SC-122113-0181-1 Silver plating RP13A-12RB-13PA(71) 113-0203-2 71 1.2 1.35 13.9 1.4 24 to 28 AWG RP13A-SC-221113-0362-6 Partial gold plating Reel contacts (Note 1) Above figures show the arrangement RP13A-SC-222113-0151-0 Silver plating viewed from the panel surface. The mating guide of flange type is located 13 contact position for super-thick wires (available for contact position numbers 12 and 13 only) on the top position. Applicable (Note 2) The applicable panel thickness for the Type Part No. HRS No. Plating B C D E wire size flange type receptacle is 2.7mm max., Loose piece RP13A-SC-112113-0180-9 since this type is mounted from the back contacts Silver plating 1.6 2.1 13.9 1.4 18 to 22 AWG surface of the panel. Reel contacts RP13A-SC-212113-0150-8 (Note 3) The applicable panel thickness for a hex nut fastening type is 5mm max. and For 20 contact positions 1mm min. Applicable Type Part No. HRS No. Plating B C D E wire size Loose piece RP19-SC-122 113-0270-0 contacts Silver plating 1.2 1.35 11 1.18 24 to 30 AWG Reel contacts RP19-SC-222 113-0266-2 (Note 1) Use connectors with gold-plated contacts if the connectors will be subjected to constant vibration. (Note 2) Loose piece contacts are available in 100 piece packs. Reel contacts are available as 10,000 piece reels. 5

RP13 Series●Plastic Push-Pull Lock Connectors RP13A anti-static type Plug 47.2 n) o 32 si n e m di m u 1 m 16.9 Ø6. Mini Ø ( (Representative example.) RP13A-12PA-13PC(71) d. e v r e s Part No. HRS No. No. of contacts Weight e R s RP13A-12PA-13PC(71) 113-4003-5 71 13 6.0g ht g (Note) Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable Ri is suitable for use with these connectors before usage and production. All D. T Receptacle (flange type) L O., (Crimp type) C C 15 TRI 12 25 C 20 E φ19 L 3 E 4. E 1φ S 2×Ø2.8 (hole) O Press-fitted (metal flange) R metal flange HI 45 ° 8 1 (Representative example.) 0 2 RP13A-12R-13SC(71) ht g ri py Part No. HRS No. No. of contacts Weight o C 8 RP13A-12R-13SC(71) 113-4002-2 71 13 4.0g 1 (Remarks) See page 7 for details on mounting hole dimensions. 0 2 1. c. e D Contact (Male contact) (Female contact) Ａ-Ａ Ａ-Ａ Ａ Ａ Ｅ Ｂ Ｅ Ｂ Ａ Ａ Ｄ Ｃ Ｄ Ｃ Applicable Applicable Type Part No. HRS No. B C D E Type Part No. HRS No. B C D E wire size wire size Loose Loose piece RP19-PC-122 113-0268-8 piece RP19-SC-122 113-0270-0 1.2 1.35 24 to 30 AWG contacts 1.2 1.35 12 1.18 24 to 30 AWG contacts 11 1.18 Reel RP19-PC-222 113-0264-7 Reel RP19-SC-212 113-0265-0 1.6 2.1 18 to 22 AWG contacts contacts RP19-SC-222 113-0266-2 1.2 1.35 24 to 30 AWG (Note 1) Loose piece contacts are available in 100 piece packs. Reel contacts are available as 10,000 piece reels. Only contact positions 12 and 13 can be used with 18 to 20 AWG wire. Other contact positions numbers cannot be used with this wire gauge. (Note 2) When crimping wires gauge 18 to 22 AWG, make sure that the outer insulation diameter is Ø1.79mm or less. For wires gauges 24 to 30 AWG, use an outer insulation diameter of Ø1.15 or less. 6

RP13 Series●Plastic Push-Pull Lock Connectors Panel mounting hole dimensions (for anti-static type) 3.1+ 00.1 45°±30′ ＋0.2 2×φ2.8　0 1 +0. 0 5 7. +0.1 Ø 14.4 0 ±0.1 20 d. e v (Flange type) r e s e R (Note 1) Above fi gures show the arrangement viewed from the panel surface. The mating guide of fl ange type is located on top s the position. ht g (Note 2) The applicable panel thickness for a fl ange type receptacle is maximum 4.7mm, as this type is mounted from the back Ri surface of the panel. All D. Dip post arrangement sizes for receptacles T L Straight dip type O., 13 contacts 15 contacts C C RI 3.45 3.45 3.15 T C 2.3 2.3 0.95 1.25 E L 5 E 5 5 SE １ ２ ３ 0.6 2. 4 3 2 1 0.9 2.9 3.3 O ４ ７ 75 8 5 R 2. HI ８ 11 12 9 ht 2018 (13Ø 0p.o6sitions1).15 １２ １３ 1.15 1.35 3.75 (15 poØs0it.io6ns) 1.15 15 14 13 1.15 1.05 3 g 2.3 2.3 yri 1.4 1.4 3.45 3.45 p o C 8 (Remarks) 1. The fi gures shown above for 13 and 15 contact positions are viewed from the receptacle mating end. 1 2. A machining tolerance of ±0.05 is recommended for the PCB layout dimensions. 0 2 1. c. Right-angle, dip type e D 13 contacts 20 contacts C.L C.L 11 11 Use a tapping screw for JIS B 1122 M3. Use a tapping screw for JIS B 1122 M3. (Screw hole for mounting the connector) (Screw hole for mounting the connector) 5 5 １３ １２ １１ １８ ２０ １１ ８ 2 １７ １９ １６ 2 Ø0.9 ７ ４ 2 ５ １３ １５ 2 (13 positions) 2 １２ １４ １０ 2 ３ １ Ø0.85 ７ ９ 2 ６ ８ 2 1.15 1.15 (20 positions) ２ ４ 2 1.4 1.4 １ ３ 2 2.3 2.3 0.8 0.8 3.45 3.45 2.4 2.4 4 4 (Remarks) 1. The fi gures shown above are viewed from the contact insertion end. 2. A machining tolerance of ±0.05mm is recommended for the PCB layout dimensions. 7

RP13 Series●Plastic Push-Pull Lock Connectors Applicable tools Applicable wire size and Type Items Part No. HRS No. Applicable contact applicable cable diameter RP13-TC-11 150-0024-3 RP13-PC-112 18 to 22 AWG RP13-TC-12 150-0025-6 RP13-PC-121, 122 24 to 28 AWG RP13A-TC-11 150-0026-9 RP13A-SC-112 18 to 22 AWG Manual crimping RP13A-TC-12 150-0027-1 RP13A-SC-121, 122 24 to 28 AWG Manual tool RP19-PC-112 RP19-TC-11 150-0048-1 18 to 22 AWG RP19-SC-112 RP19-PC-122 RP19-TC-12 24 to 28 AWG RP19-SC-122 d. e Automatic crimping v CM-105C 901-0001-0 ------------------------ ------------------------ er press s e RP13-PC-221, 222 R AP105-RP13-2 901-2024-0 24 to 28 AWG s Auto RP13A-SC-221, 222 ht g Applicator AP105-RP19-1 901-2013-3 RP19-SC-212 18 to 22 AWG Ri All AP105-RP19-2 901-2014-6 RP19-PC-222 24 to 28 AWG D. RP19-SC-222 T Ø4.6~Ø5.8 L RP13A-TC-01 150-0070-0 ------------------------ O., Cable crimping tool Ø7~Ø7.5 C RP13A-TC-02 150-0071-3 ------------------------ Ø6.3, Ø7.8 C RI RP13-PC-TP 150-0021-5 Male contact ------------------------ T RP13A-SC-TP 150-0022-8 Female contact ------------------------ C Extraction tool E Male/female contact for L RP6-SC-TP 150-0039-0 ------------------------ E RP19 E S O R HI 8 1 0 2 ht g ri y p o C 8 1 0 RP13A-TC-02 RP13-TC-11 2 1. Cable crimping tool Manual crimping tool c. e (handle shape is shown as an example.) D RP6-SC-TP RP13-PC-TP RP13A-SC-TP Extraction tools Automatic crimping press (Type CM-105C) 8

RP13 Series●Plastic Push-Pull Lock Connectors Termination/assembly procedure Plug Assembly procedure Cable 1. First, pass the terminated cable through the cord tube in the following order: spring, connection sleeve, and cord Cord tube Round, fl at head screw bushing, and then crimp and terminate the contacts. 2. Assemble the crimped and terminated contacts to the contact holes of the P-insulation P case. At this time, Spring please make sure that the crimped contacts are securely engaged onto the contact holes of the Locking collar Arrow view A P-insulation P case by lightly pulling the cable. d. 3. Attach the metal fitting by clamping to it the cord e v A bushing and assemble these into the P-insulation P r e s case. Then crimp the metal fitting by clamping it with e R the applicable tool. s Cord bushing 4. Next, attach in the following order to the P-insulation P ht g Metal fi tting for e case: connection sleeve, spring, and cord. Then align Ri clamping mor the screw hole of the cord tube and that of the metal D. All 2 or ftihttein sgp efocri ficelda mtopriqnuge, oafn 0d. 2ti gNh•tmen ( 2t hkeg •cromu)n.d flat screw to T C CO., L P-insulation 3＋27.30 3.3±0.2 5. Abloefctekenirn gtch ocemo laplaslers tmeemdo,v betlesys cpt ortrohreecce ptdlyau.rrtes tdoe smcarikbee dsu areb othvae t hthaes RI P case T C E L E E S Contact Arrangement O R HI (Standard type) 8 1 ２ 0 2 ht rig １ ３ 4 3 2 1 ４ １ y p Contact 7 6 o ４ ７ 8 5 １０ ５ C arrangement 11 10 8 ８ 11 12 9 １６ １１ 1 0 2 １２ １３ 15 14 13 ２０ １７ 1. c. e D No. of contacts 13 15 20 (Anti-static type) ２ １ ３ Contact ４ ７ arrangement ８ 11 12 13 No. of contacts 13 (Remarks) 1. The fi gures shown above are viewed from the receptacle and jack mating end (plug connection end). 9

RP13 Series●Plastic Push-Pull Lock Connectors Precautions This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. 　・Dusty environments 　・Area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. Example; In close proximity to factory exhaust, automotive emissions, etc. 　・Close to heaters, or in other areas marked by extreme temperature differences or high humidity. 　・Close to rubber products includes rubber adhesives. The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. Storage Packing state; Packed in original packing or equivalent container Temperature -10 to +60ç Humidity 85% Max (It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any d. temperature fluctuation) e v er Please use this products within 6 months of delivery. s e (After 6 month, please check the solderbility before use) R “Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB. s ht g Ri All D. T L O., C C RI T C E L E E S O R HI 8 1 0 2 ht g ri y p o C 8 1 0 2 1. c. e D 10

RP13 Series●Plastic Push-Pull Lock Connectors MEMO : d. e v r e s e R s ht g Ri All D. T L O., C C RI T C E L E E S O R HI 8 1 0 2 ht g ri y p o C 8 1 0 2 1. c. e D 11

RP13 Series●Plastic Push-Pull Lock Connectors USA: USA: USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 2300 Warrenville Road, Suite 150, 2841 Junction Ave, Suite 200 17197 N. Laurel Park Drive, Suite 253, Downers Grove, IL 60515 San Jose, CA. 95134 Livonia, MI 48152 Phone : +1-630-282-6700 Phone : +1-408-253-9640 Phone : +1-734-542-9963 http://www.hirose.com/us/ Fax : +1-408-253-9641 Fax : +1-734-542-9964 http://www.hirose.com/us/ http://www.hirose.com/us/ USA: THE NETHERLANDS: GERMANY: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE HIROSE ELECTRIC EUROPE B.V. HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH 300 Brickstone Square Suite 201, Hogehillweg #8 1101 CC Amsterdam Z-O Schoenbergstr. 20, 73760 ostfildern Andover, MA 01810 Phone : +31-20-6557460 Phone : +49-711-456002-1 Phone : +1-978-662-5255 Fax : +31-20-6557469 Fax : +49-711-456002-299 http://www.hirose.com/eu/ http://www.hirose.com/eu/ d. e v r e s e GERMANY: GERMANY: FRANCE: R s HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE ht Neumeyerstrasse 22-26, 90411 Nurnberg Bayernstr. 3, Haus C 30855 Langenhagen, Germany 130 Avenue Joseph Kessel, Bat E, 78960 g Ri Phone : +49-911 32 68 89 63 Phone : +49-511 97 82 61 30 Voisins le Bretonneux, France All Fax : +49-911 32 68 89 69 Fax : +49-511 97 82 61 35 Phone : +33-1-85764886 http://www.hirose.com/eu/ http://www.hirose.com/eu/ Fax : +33-1-85764823 D. http://www.hirose.com/eu/ T L O., UNITED KINGDOM: CHINA: CHINA: C HIROSE ELECTRIC EUROPE BV (UK BRANCH) HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS) HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH C 4 Newton Court, Kelvin Drive, Knowlhill, 18, Enterprise Center Tower 2, 209# Gong He A1001, Ocean International Center, Building 56# East 4th RI T Milton Keynes, MK5 8NH Road, Jing’an District, Shanghai, CHINA 200070 Ring Middle Road, ChaoYang District, Beijing, 100025 C Phone : +44-1908 202050 Phone : +86-21-6391-3355 Phone : +86-10-5165-9332 E L Fax : +44-1908 202058 Fax : +86-21-6391-3335 Fax : +86-10-5908-1381 E E http://www.hirose.com/eu/ http://www.hirose.com/cn/ http://www.hirose.com/cn/ S O R CHINA: HONG KONG: TAIWAN: HI HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD. 8 Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei 1 0 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377 2 ht Phone : +86-755-8207-0851 Phone : +852-2803-5338 Fax : +886-2-2555-7355 g Fax : +86-755-8207-0873 Fax : +852-2591-6560 http://www.hirose.com/tw/ ri y http://www.hirose.com/cn/ http://www.hirose.com/hk/ p o C 8 KOREA: SINGAPORE: INDIA: 1 HIROSE KOREA CO.,LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE 0 2 143, Gongdan 1-daero, Siheung-si, 03, Anson Road, #20-01, Springleaf Tower, Office NO.552, Regus-Green Boulevard, Level5, Tower C, 1. c. Gyeonggi-do, 15084, Korea Singapore 079909 Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India e Phone : +82-31-496-7000 Phone : +65-6324-6113 Phone : +91-12-660-8018 D Fax : +82-31-496-7100 Fax : +65-6324-6123 Fax : +91-120-4804949 http://www.hirose.co.kr/ http://www.hirose.com/sg/ http://www.hirose.com/sg/ INDIA: MALAYSIA: THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Lepas Penang, 11950, Malaysia Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +91-80-4120 1907 Phone : +604-648-5536 Phone : +66-2-686-1255 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ Fax : +66-2-686-3433 http://www.hirose.com/sg/ http://www.hirose.com/sg/ ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 12 The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements. Powered by TCPDF (www.tcpdf.org)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: H irose Electric: RP13-PC-212 RP13-PC-222 RP13A-12P-13SC(71) RP13A-SC-212 RP13A-SC-222 RP13A-12J-13PC(71) RP13- PC-112 RP13-PC-122 RP13A-SC-112 RP13A-SC-122 RP13A-12PA-13SC(71) RP13A-12RA-13PC(01) RP13A- 12RA-13PC(71) RP13A-12PB-13SC(71) RP13A-12RB-13PC(71) RP13A-12PD-13SC(71) RP13A-12PE-13SC(71) RP13A-12RA-13PA(71) RP13A-12RB-13PA(71) RP13A-12JD-13PC(71) RP13A-12PD-15SC(71) RP13A-12RA- 15PC(71) RP13A-12PG-20SC(71) RP13A-12RC-20PB RP13A-12RC-20PB(01) RP13A-12PD-20SC(71) RP13A- 12PD-20SC(72) RP13A-12RA-20PC(71) RP13A-12PH-20SC(71) RP13A-12JK-15PC(71) RP13A-12PK-15SC(71) RP13-PC-221 RP13-PC-121 RP13A-SC-221 RP13A-SC-121 RP13A-12JD-20PC(72) RP13A-12RA-15PA(71) RP13A-12JG-20PC(71) RP13A-12JG-20PC(72) RP13A-12JD-15PC(71) RP13A-12PK-13SC(71) RP13A-12PO- 20SC(71) RP13A-12PP-15SC(71) RP13A-12JP-15PC(71) RP13A-12PK-20SC(71) RP13A-12PK-20SC(72) RP13A- 12RC-13PB RP13A-12PS-20SC(71) RP13A-12PS-13SC(71) RP13A-12JM-13PC(71) RP13A-12JK-13PC(71) RP13A-12R-13SC(71) RP13A-12PA-13PC(71) RP13A-12PK-13PC(71) RP13A-12RA-13SC(71) RP13A-SC-TP RP13A-TC-01 RP13A-TC-02 RP13A-TC-11 RP13A-TC-12 RP13-PC-TP RP13-TC-11 RP13-TC-12 RP19-TC-11 RP19-TC-12 RP19-PC-112 RP19-PC-121 RP19-PC-122 RP19-SC-112 RP19-SC-121 RP19-SC-122 RP19-SC-222 RP19-PC-221 RP19-PC-222 RP19-SC-212 RP19-SC-221 AP105-RP13-2(62) AP105-RP19-3(65) WI Crimper 103- RP13-1 AP105-RP19-2(62) AP105-RP19-3(62) AP105-RP13-1(64) AP105-RP19-3(90) AP105-RP19-1(62) WI Crimper 105-RP19-3 WI Anvil 105-RP19-2 AP105-RP13-2(65) WI Crimper 103-RP13-2 AP105-RP19-3(61) AP105- RP19-1(65) AP105-RP13-1(63) AP105-RP13-1(66) WI Crimper 105-RP19-2 AP105-RP19-2(61) WI Anvil 105-RP19- 1 AP105-RP19-1(61) AP105-RP19-1(90) WI Crimper 105-RP19-1 AP105-RP13-1(62) AP105-RP13-2(61)