Features • Wide 4:1 input voltage range • 1.6kVDC isolation DC/DC Converter • UL60950-1 certified Regulated • Efficiency up to 84% • Six-sided continuous shield Converter RP10-EW • Fixed operating frequency 10 Watt Description The RP10-EW series wide input range DC/DC converters are certified to UL 60950-1 and cUL 60950-1. 2“ x 1“ This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2” x 1” package meets military standards for thermal shock and Single and Dual vibration tolerance and is available with an optional remote on/off control pin. Output Selection Guide Part Number Input Output Output Input (1) Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load (2) [VDC] [VDC] [mA] [mA] [%] [µF] RP10-243.3SEW (3,4) 9-36 3.3 2500 441 78 6800 RP10-2405SEW (3,4) 9-36 5 2000 521 80 4700 RP10-2412SEW (3,4) 9-36 12 830 494 84 690 RP10-2415SEW (3,4) 9-36 15 670 517 81 470 RP10-483.3SEW (3,4) 18-75 3.3 2500 226 76 6800 RP10-4805SEW (3,4) 18-75 5 2000 322 81 4700 RP10-4812SEW (3,4) 18-75 12 830 247 84 690 RP10-4815SEW (3,4) 18-75 15 670 249 84 470 RP10-2405DEW (3,4) 9-36 ±5 ±1000 508 82 ±680 RP10-2412DEW (3,4) 9-36 ±12 ±416 520 80 ±330 E196683 RP10-2415DEW (3,4) 9-36 ±15 ±333 520 80 ±110 RP10-4805DEW (3,4) 18-75 ±5 ±1000 254 82 ±680 RP10-4812DEW (3,4) 18-75 ±12 ±416 267 78 ±330 RP10-4815DEW (3,4) 18-75 ±15 ±333 257 81 ±110 Notes: UL60950-1 certified Note1: Maximum values at nominal input voltage and full load EN55032 compliant Note2: Max. Cap load is tested at minimum input and constant resistive load Model Numbering RP10-__ __ _EW/_- nom. Input Voltage “Package (4)” nom. Output Voltage “CTRL Logic (3)” Single or Dual Notes: Note3: no suffix for standard part without CTRL pin add suffix “P” for CTRL function with positive logic (1=ON, 0=OFF) add suffix “N” for CTRL function with negative logic (0=ON, 1=OFF) Note4: add suffix “-HC” for premounted Heat-sink with clips Ordering Examples RP10-2405SEW/P = 24V input, 5V output, single, positive Logic CTRL pin RP10-4805DEW/N-HC = 48V input, ±5V output, dual, negative Logic CTRL pin, Heat-sink premounted www.recom-power.com REV.: 5/2019 PD-1

RP10-EW DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Filter Pi-Type nom. Vin = 24VDC 9VDC 24VDC 36VDC Input Voltage Range nom. Vin = 48VDC 18VDC 48VDC 75VDC nom. Vin = 24VDC 50VDC Input Surge Voltage 100ms max. nom. Vin = 48VDC 100VDC Input Reflected Ripple Current (5) 30mAp-p Minimum Load (6) 10% Start-up Time Power up 20ms DC-DC ON Open or 3.5VDC < V < 12VDC Positive Logic CTRL DC-DC OFF Short or 0VDC < V < 1.2VDC ON/OFF CTRL (7) CTRL DC-DC ON Short or 0VDC < V < 1.2VDC Negative Logic CTRL DC-DC OFF Open or 3.5VDC < V < 12VDC CTRL Input Current of CTRL pin DC-DC ON -0.5mA +1.0mA Standby Current DC-DC OFF 20mA Internal Operating Frequency 270kHz 300kHz 330kHz Single 50mVp-p Ripple and Noise 20MHz BW Dual 75mVp-p Notes: Note5: Simulated source impedance of 12μH. 12μH inductor in series with +Vin Note6: The RP10-EW series requires a minimum of 10% loading on the output to maintain specified regulation. Operation u nder no-load condition will not damage these devices, however they may not meet all listed specification Note7: If no suffix is specified, pin6 will be absent. If fitted, the ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin RP10-2405SEW Efficiency vs. Output Current Efficiency vs. Input Voltage full load 95 90 90 85 85 80 ency [%] 7705 ncy [%] 7850 Effici 6605 Efficie 70 55 9Vin 50 65 24Vin 45 36Vin 40 60 10 20 30 40 50 60 70 80 90 100 9 12 15 18 21 24 27 30 33 36 Output Current [%] Input Voltage [VDC] continued on next page www.recom-power.com REV.: 5/2019 PD-2

RP10-EW DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated) RP20-4805SFW Efficiency vs. Output Current Efficiency vs. Input Voltage full load 95 90 90 85 85 80 ency [%] 7705 ncy [%] 7850 Effici 6605 Efficie 70 55 18Vin 50 48Vin 65 45 75Vin 40 60 10 20 30 40 50 60 70 80 90 100 18 24 30 36 42 48 54 60 66 72 75 Output Current [%] Input Voltage [VDC] REGULATIONS Parameter Condition Value Output Accuracy ±1.0%. Line Regulation low line to high line, full load ±0.2% Single ±0.5% Load Regulation 0% to 100% load Dual ±1.0% Cross Regulation asymmetrical 25%<>100% load ±5.0% Transient Response Recovery Time 25% load step change 250μs typ. PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery 3.3Vout 3.9VDC 5Vout 6.2VDC Over Voltage Protection (OVP) zener diode clamp 12Vout 15VDC 15Vout 18VDC Over Load Protection (OLP) % Iout rated 150% typ. I/P to O/P 1.6kVDC/ 1 minute Isolation Voltage (8) I/P to O/P to case 1.6kVDC/ 1 minute Isolation Resistance Viso= 500VDC 1GΩ min. Isolation Capacitance 300pF max. Notes: Note8: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note9: This power module is not internally fused. An input line fuse must always be used www.recom-power.com REV.: 5/2019 PD-3

RP10-EW DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated) ENVIRONMENTAL Parameter Condition Value without derating -40°C to +78°C Operating Temperature Range with derating -40°C to +94°C Maximum Case Temperature +105°C Temperature Coefficient ±0.02%/K max. without heat-sink 12K/W Thermal Impedance @ natural convection 0.1m/s with heat-sink 10K/W Operating Humidity non-condensing 5% - 95% RH Thermal Shock according to MIL-STD-810F Vibration according to MIL-STD-810F MIL-HDBK-217F, G.B. 3342 x 103 hours MTBF Bellcore TR-NWT-000332 (10) 1976 x 103 hours Derating Graph (11) RP10-2412SEW RP10-2412SEW-HC 100 100 80 80 %] %] r [ r [ e 60 e 60 w w o o P P ut 40 ut 40 p p ut ut O O 20 20 0 0 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 78 94 8394 Ambient Temperature [°C] Ambient Temperature [°C] Notes: Note10: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment) Note11: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact RECOM Techsupport for detailed information SAFETY AND CERTIFICATIONS Certificate Type (Safety) Condition Standard UL60950-1, 2nd Edition, 2011 Information Technology Equipment, General Requirements for Safety E196683 CAN/CSA-C22.2 No. 60950-1-07, 2nd Edition, 2011 EAC RU-AT.49.09571 TP TC 004/2011 RoHS 2 RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Standard / Criterion Electromagnetic compatibility of multimedia equipment - Emission with external filter EN55032, Class A and B requirements refer to “EMC Filtering Suggestions” ESD Electrostatic discharge immunity test Air ±8kV and Contact ±6kV EN61000-4-2, Criteria B Radiated, radio-frequency, electromagnetic field immunity test 10 V/m EN61000-4-3, Criteria A Fast Transient and Burst Immunity (12) ±2kV EN61000-4-4, Criteria B Surge Immunity (12) ±2kV EN61000-4-5, Criteria B Immunity to conducted disturbances, induced by radio-frequency fields 10 Vr.m.s EN61000-4-6, Criteria A Power Magnetic Field Immunity 100A/m continuous; 1000A/m 1s EN61000-4-8, Criteria A continued on next page www.recom-power.com REV.: 5/2019 PD-4

RP10-EW DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated) Notes: Note12: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5 Recom suggests Nippon chemi-con KY series 220μF/100V EMC Filtering Suggestions according to EN55032 Single Dual C C 2 2 +V F1 +V +V F1 +V in +V +V out in +V +V out in out in out C C 1 1 Com Com -V -V -V -V -V in out -V -V in out -V in C out in C out 2 2 C C 3 3 +V F1 +V +V F1 +V in Component L+isVt Class A +V out in +V +V out in out in out C C MODEL 1 C1 C2 1 C3 Com Com RP10-24xxSEW 1μF/50V 1000pF/2kV 1000pF/2kV -VC -V -VC -V -V RP10-24xxDEW in3 121ou0t MLCC -V 1808 ML-CVC in13808 MLCC out -V in out in out F1 L1RP10-48xxSEW C 1.5μF/100V F11000pF/2kVL1 1000pCF/2kV +V 3 +V +V 3 +V in RP10-48+xVxDEW +V 1812 MLCCout in 1808 MLCC +V 1808 MLCC+V out in out in out C C C C 1 2 1 2 Com Com Single Dual -V -V -V -V -V in out -V -V in out -V in C out in C out 3 3 C C F L 4 F L 4 1 1 1 1 +V +V +V +V in +V +V out in +V +V out in out in out C C C C 1 2 1 2 Com Com -V -V -V -V -V in out -V -V in out -V in out in out C C 4 4 Component List Class B MODEL C1 C2 C3/C4 L1 RP10-24xxSEW 2.2μF/50V 1000pF/2kV CMC: 325μH N/A RP10-24xxDEW 1812 MLCC 1808 MLCC ref: WE 744290321 ref.: CMC-06 RP10-48xxSEW 2.2μF/50V 2.2μF/100V 1000pF/2kV CMC: 325μH RP10-48xxDEW 1812 MLCC 1812 MLCC 1808 MLCC ref: WE 744290321 ref.: CMC-06 DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value case nickel coated copper Material base non-conductive black plastic potting epoxy (UL94 V-0) without Heat-sink 50.8 x 25.4 x 10.2mm Dimensions (LxWxH) with Heat-sink 56.8 x 25.4 x 16.8mm without Heat-sink 27g Weight with Heat-sink 37.89g continued on next page www.recom-power.com REV.: 5/2019 PD-5

RP10-EW DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated) Dimension Drawing (mm) Pinning Information Pin # Single Dual 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout 4 no Pin Com 50.8 25.4 5 -Vout -Vout 10.2 5.6 Tole6rance: CxxT.xR=L ± (30).5mmCTRL (3) xx.xx= ±0.25mm 8 x 2.54= 20.32 15.20 Ø 1.0±0.1 Recommended Footprint Details 2.54 3 7.62 6 5 5.08 10.2 1 2.54 2 2.54 Bottom View 4 Top View 4 12.70 2 1 6 5 3 Dimension Drawing with Heat-sink (mm) 50.8 25.4 HToepat V-sieinwk 56.8 5.85 24.2 10.216.8 5.6 8 x 2.54= 20.32 15.20 Ø 1.0±0.1 Recommended Footprint Details 2.54 3 7.62 6 5 5.08 10.2 1 2.54 2 2.54 Bottom View 4 Top View 4 12.70 2 1 6 5 3 www.recom-power.com REV.: 5/2019 PD-6

RP10-EW DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated) PACKAGING INFORMATION Parameter Type Value tube without heat-sink 255.0 x 54.0 x 22.0mm Packaging Dimension (LxWxH) tray with heat-sink 302.5 x 222.0 x 20.0mm tube without heat-sink 9pcs Packaging Quantity tray with heat-sink 20pcs Storage Temperature Range -55°C to +125°C Storage Humidity non-condensing 5% - 95% RH The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 5/2019 PD-7

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: R ECOM: RP10-2405DEW RP10-2405DEW/M2 RP10-2405DEW/M2-HC RP10-2405DEW/N RP10-2405DEW/N/M2 RP10- 2405DEW/N/M2-HC RP10-2405DEW/N-HC RP10-2405DEW/P RP10-2405DEW/P/M2 RP10-2405DEW/P/M2-HC RP10-2405DEW/P-HC RP10-2405DEW-HC RP10-2405SEW RP10-2405SEW/M2 RP10-2405SEW/M2-HC RP10- 2405SEW/N RP10-2405SEW/N/M2 RP10-2405SEW/N/M2-HC RP10-2405SEW/N-HC RP10-2405SEW/P RP10- 2405SEW/P/M2 RP10-2405SEW/P/M2-HC RP10-2405SEW/P-HC RP10-2405SEW-HC RP10-2412DEW RP10- 2412DEW/M2 RP10-2412DEW/M2-HC RP10-2412DEW/N RP10-2412DEW/N/M2 RP10-2412DEW/N/M2-HC RP10- 2412DEW/N-HC RP10-2412DEW/P RP10-2412DEW/P/M2 RP10-2412DEW/P/M2-HC RP10-2412DEW/P-HC RP10- 2412DEW-HC RP10-2412SEW RP10-2412SEW/M2 RP10-2412SEW/M2-HC RP10-2412SEW/N RP10- 2412SEW/N/M2 RP10-2412SEW/N/M2-HC RP10-2412SEW/N-HC RP10-2412SEW/P RP10-2412SEW/P/M2 RP10- 2412SEW/P/M2-HC RP10-2412SEW/P-HC RP10-2412SEW-HC RP10-2415DEW RP10-2415DEW/M2 RP10- 2415DEW/M2-HC RP10-2415DEW/N RP10-2415DEW/N/M2 RP10-2415DEW/N/M2-HC RP10-2415DEW/N-HC RP10-2415DEW/P RP10-2415DEW/P/M2 RP10-2415DEW/P/M2-HC RP10-2415DEW/P-HC RP10-2415DEW-HC RP10-2415SEW RP10-2415SEW/M2 RP10-2415SEW/M2-HC RP10-2415SEW/N RP10-2415SEW/N/M2 RP10- 2415SEW/N/M2-HC RP10-2415SEW/N-HC RP10-2415SEW/P RP10-2415SEW/P/M2 RP10-2415SEW/P/M2-HC RP10-2415SEW/P-HC RP10-2415SEW-HC RP10-243.3SEW RP10-243.3SEW/M2 RP10-243.3SEW/M2-HC RP10- 243.3SEW/N RP10-243.3SEW/N/M2 RP10-243.3SEW/N/M2-HC RP10-243.3SEW/N-HC RP10-243.3SEW/P RP10- 243.3SEW/P/M2 RP10-243.3SEW/P/M2-HC RP10-243.3SEW/P-HC RP10-243.3SEW-HC RP10-4805DEW RP10- 4805DEW/M2 RP10-4805DEW/M2-HC RP10-4805DEW/N RP10-4805DEW/N/M2 RP10-4805DEW/N/M2-HC RP10- 4805DEW/N-HC RP10-4805DEW/P RP10-4805DEW/P/M2 RP10-4805DEW/P/M2-HC RP10-4805DEW/P-HC RP10- 4805DEW-HC RP10-4805SEW RP10-4805SEW/M2 RP10-4805SEW/M2-HC RP10-4805SEW/N