RNX www.vishay.com Vishay Dale Metal Oxide Resistors, Special Purpose, High Voltage FEATURES • Low TCR: ± 200 ppm/°C standard; ± 100 ppm/°C; ± 50 ppm/°C available • Tolerance: ± 1 % standard to 1 G; ± 5 % above 1 G; ± 0.5 % available in ± 50 ppm/°C only. Special tolerance and/or temperature coefficient matching available. • High voltage (up to 8 kV) • For oil bath or open air operation • Matched sets available • Special testing available upon request • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING MAXIMUM RESISTANCE TEMPERATURE GMLOODBEALL HISMTOODREICLAL P25 °C (1) P70 °C (1) P125 °C (1) VWOOLTRAKGINEG (2) RANGE (3) TOLE±R %ANCE COEFFICIENT W W W  ± ppm/°C V 1M to 22M 0.5, 1, 2, 5, 10 50 RNX025 RNX-1/4 0.5 0.36 0.25 750 1K to 100M 1, 2, 5, 10 100, 200 100 to 100K 1, 2, 5, 10 Non-inductive (4) 1M to 50M 0.5, 1, 2, 5, 10 50 1K to 100M 1, 2, 5, 10 100 RNX038 RNX-3/8 1.0 0.72 0.5 1.5K 1K to 1G 1, 2, 5, 10 200 100 to 100K 1, 2, 5, 10 Non-inductive (4) 1M to 100M 0.5, 1, 2, 5, 10 50 1K to 250M 1, 2, 5, 10 100 RNX050 RNX-1/2 1.2 0.86 0.6 2K 1K to 2G 1, 2, 5, 10 200 100 to 100K 1, 2, 5, 10 Non-inductive (4) 1M to 100M 0.5, 1, 2, 5, 10 50 1K to 500M 1, 2, 5, 10 100 RNX075 RNX-3/4 2.0 1.44 1.0 3K 1K to 2G 1, 2, 5, 10 200 100 to 100K 1, 2, 5, 10 Non-inductive (4) 1M to 100M 0.5, 1, 2, 5, 10 50 1K to 500M 1, 2, 5, 10 100 RNX100 RNX-1 2.5 1.8 1.25 4K 1K to 2G 1, 2, 5, 10 200 100 to 1M 1, 2, 5, 10 Non-inductive (4) 1K to 500M 1, 2, 5, 10 100 RNX125 RNX-1-1/4 3.0 2.16 1.5 5K 1K to 2G 1, 2, 5, 10 200 100 to 1M 1, 2, 5, 10 Non-inductive (4) 1K to 500M 1, 2, 5, 10 100 RNX150 RNX-1-1/2 4.0 2.88 2.0 6K 1K to 2G 1, 2, 5, 10 200 100 to 1M 1, 2, 5, 10 Non-inductive (4) 1K to 500M 1, 2, 5, 10 100 RNX200 RNX-2 5.0 3.6 2.5 8K 1K to 2G 1, 2, 5, 10 200 100 to 1M 1, 2, 5, 10 Non-inductive (4) Notes • All resistance values are calibrated at 100 VDC. Calibration at other voltages available. • Part marking: Print marked - DALE, model, value, tolerance, TCR, date code (model and date omitted on RNX-1/4) • Special modifications: - Special preconditioning (power aging, temperature cycling etc.) to customer specifications - Non-helixed resistors can be supplied for critical high frequency applications (non-inductive) (1) Increase wattage by 25 % for 0.032" (0.813 mm) diameter leads (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (3) For resistance values above and below those listed please contact us (4) Non-inductive ± 200 ppm/°C TCR only Revision: 19-Sep-12 1 Document Number: 31032 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RNX www.vishay.com Vishay Dale TECHNICAL SPECIFICATIONS PARAMETER UNIT RNX025 RNX038 RNX050 RNX075 RNX100 RNX125 RNX150 RNX200 Insulation Resistance   1011 Category Temperature Range °C Epoxy coated = - 55/+ 150; silicone coated = - 55/+ 225 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RNX05010K0KKLB (preferred part numbering format) R N X 0 5 0 1 0 K 0 K K L B GLOBAL RESISTANCE TOLERANCE TEMP. PACKAGING (1) CONSTRUCTION SPECIAL MODEL VALUE CODE COEFFICIENT (See Standard R = Ω D = ± 0.5 % H = 50 ppm EL = Lead (Pb)-free, lacer Blank = Standard Blank = Standard Electrical K = kΩ F = ± 1 % K = 100 ppm EE = Lead (Pb)-free, T/R N = Non-in ductive (Dash number) Specifications M = MΩ G = ± 2 % N = 200 ppm (1/4, 3/8, 1/2, 3/4, 1 only) P = 0.032" Ø leads (Up to 3 digits) table) G = GΩ J = ± 5 % LB = Tin/lead, lacer From 1 to 999 910R = 910 Ω K = ± 10 % RC = Tin/lead, T/R as applicable 10M0 = 10 MΩ (1/4, 3/8, 1/2, 3/4, 1 only) 1G00 = 1.0 GΩ Historical Part Number example: RNX-1/210K0KK (will continue to be accepted) RNX-1/2 10K0 K K L05 HISTORICAL RESISTANCE TOLERANCE TEMP. CONSTRUCTION PACKAGING MODEL VALUE CODE COEFFICIENT Notes (1) Some packaging codes are model specific • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). DIMENSIONS in inches (millimeters) GLOBAL MODEL L L 1 MAX. 1.50 ± 0.125 0.025 ± 0.002 (1) RNX025 0.290 ± 0.020 (7.37 ± 0.51) 0.358 (9.09) (38.10 ± 3.18) (0.64 ± 0.05) RNX038 0.420 ± 0.020 (10.67 ± 0.51) 0.470 (11.94) RNX050 0.540 ± 0.020 (13.72 ± 0.51) 0.595 (15.11) RNX075 0.790 ± 0.020 (20.07 ± 0.51) 0.845 (21.46) RNX100 1.040 ± 0.020 (26.42 ± 0.51) 1.100 (27.94) RNX125 1.290 ± 0.020 (32.77 ± 0.51) 1.350 (34.29) L L 0.140 + 0.015 - 0.010 RNX150 1.540 ± 0.020 (39.12 ± 0.51) 1.600 (40.64) 1 max. (3.56 + 0.38 - 0.25) RNX200 2.040 ± 0.020 (51.82 ± 0.51) 2.100 (53.34) Note (1) Available with 0.032" (0.813 mm) leads ± 0.002" (0.051 mm) R E W 120 MATERIAL SPECIFICATIONS D P T A % O E R 1860000 SILICONE ECClooerametienngt RFNlaHXm0ige3h-8rH ,et eiftglamahrmpd peaeurntpraotirtt oeuyRo prN9efo 6 Xsxf i2i%yrlie0 cod0 oan ncl uReem rNomiXnne 0aRt2 Nf5ilX ma0n5d0 COATING 40 Termination Standard lead material is solder-coated copper. Solderable and weldable. 20 EPOXY COATING 0 MECHANICAL SPECIFICATIONS 0 50 100 150 200 250 Terminal Strength 5 pound pull test DERATING AMBIENT TEMPERATURE IN ° C Continuous satisfactory coverage when tested Solderability in accordance with MIL-STD-202, method 208 Revision: 19-Sep-12 2 Document Number: 31032 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RNX www.vishay.com Vishay Dale 0 V m/ p p- 10 C., V. E G A- 20 R E V A 106 107 108 109 1010 - 3/4, - 1 - 1/4 - 3/8 - 1 1/4, - 1 1/2 - 1/2 - 2 VOLTAGE COEFFICIENT RESISTANCE (Ω) Revision: 19-Sep-12 3 Document Number: 31032 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000