CMF (Military RN and RL) www.vishay.com Vishay Dale Metal Film Resistors, Axial, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL FEATURES • Very low noise (-40 dB) • Very low voltage coefficient (5 ppm/V) • Controlled temperature coefficient • Flame retardant epoxy coating • Commercial alternatives to military styles are available with higher power ratings. See CMF Industrial data sheet: (www.vishay.com/doc?31018) STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RESISTANCE RESISTANCE POWER POWER MAX. RANGE RANGE RANGE RESISTANCE MIL DIELECTRIC GLOBAL MIL RATING RATING WORKING    RANGE TOL. (3) SPEC. STRENGTH MODEL STYLE SHEET P70 °C P125 °C VOLTAGE (1) MIL-R-10509 MIL-R-10509 MIL-R-10509  ± % V W W V ± 100 ppm/°C ± 50 ppm/°C ± 25 ppm/°C MIL-PRF-22684 AC (D) (C) (E) 0.1, 0.25, CMF50 RN50 08 - 0.05 200 - 10 to 100K 10 to 100K - 450 0.5, 1 0.1, 0.25, CMF55 RN55 07 0.125 0.10 200 10 to 301K 49.9 to 100K 49.9 to 100K - 450 0.5, 1 0.1, 0.25, CMF60 RN60 01 0.25 0.125 300 10 to 1M 49.9 to 499K 49.9 to 499K - 500 0.5, 1 0.1, 0.25, CMF65 RN65 02 0.50 0.25 350 10 to 2M 49.9 to 1M 49.9 to 1M - 900 0.5, 1 0.1, 0.25, CMF70 RN70 03 0.75 (2) 0.50 500 10 to 2.49M 24.9 to 1M 24.9 to 1M - 900 0.5, 1 CMF07 RL07 01 0.25 - 250 - - - 51 to 150K 2, 5 450 CMF20 RL20 02 0.50 - 350 - - - 4.3 to 470K 2, 5 700 Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D. (3) Tolerances of ± 0.1 %, ± 0.25 % and ± 0.5 % are not applicable to characteristic D. TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient ppm/V 5 when measured between 10 % and full rated voltage Insulation Resistance   1010 min. dry;  108 min. after moisture test Operating Temperature Range °C -65/+175 (see derating curves for military range) Terminal Strength Ib 5 pound pull test for RL07/RL20; 2 pound pull test for all others Continuous satisfactory coverage when tested in accordance Solderability with MIL-R-10509 and MIL-PRF-22684 Revision: 16-Sep-16 1 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CMF (Military RN and RL) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RN60D3483FR36 (preferred part numbering format) R N 6 0 D 3 4 8 3 F R 3 6 RESISTANCE TOLERANCE MIL STYLE CHARACTERISTIC PACKAGING SPECIAL VALUE CODE RN50 E = 25 ppm 3 digit significant B = ± 0.1 % B14 = tin/lead, bulk Blank = standard RN55 C = 50 ppm figure, followed by C = ± 0.25 % BSL = tin/lead, bulk, (Dash number) RN60 D = 100 ppm a multiplier D = ± 0.5 % single lot date code 88 = hot solder dip RN65 Use “R” for F = ± 1 % R36 = tin/lead, T/R (full) 143 = non-magnetic RN70 values < 100 Ω RE6 = tin/lead, T/R (1000 pieces) 10R0 = 10 Ω RSL = tin/lead, T/R, 2152 = 21.5 k Ω single lot date code 2494 = 2.49 M Ω Historical Part Number example: RN60D3483F (will continue to be accepted) RN60 D 3483 F R36 MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: RL07S471JR36 (preferred part numbering format) R L 0 7 S 4 7 1 J R 3 6 RESISTANCE TOLERANCE MIL STYLE LEAD MATERIAL PACKAGING SPECIAL VALUE CODE RL07 S = solderable 2 digit significant G = ± 2 % B14 = tin/lead, bulk Blank = standard RL20 figure, followed by J = ± 5 % BSL = tin/lead, bulk, single lot date code (Dash number) a multiplier R36 = tin/lead, T/R (full) 88 = hot solder dip Use “R” for RE6 = tin/lead, T/R (1000 pieces) 143 = non-magnetic values < 10 Ω RSL = tin/lead, T/R, single lot date code 4R3 = 4.3 Ω 202 = 2.0 k Ω 474 = 470 k Ω Historical Part Number example: RL07S471J (will continue to be accepted) RL07 S 471 J R36 MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). MATERIAL SPECIFICATIONS Element Nickel-chrome alloy CAGE CODE: 91637 Flame retardant epoxy, formulated for Coating superior moisture protection Core Fire-cleaned high purity ceramic ENVIRONMENTAL SPECIFICATIONS Standard lead material is solder-coated Termination copper. Solderable and weldable. Environmental performance is shown in the Environmental Performance table. Test methods General APPLICABLE MIL-SPECS are those specified in MIL-R-10509 and MIL-PRF-22684. MIL-R-10509 and MIL-PRF-22684: The CMF models meet Resistance shifts due to storage at room or exceed the electrical, environmental and dimensional Shelf Life temperature are negligible. requirements of MIL-R-10509 and MIL-PRF-22684. Noise: Vishay Dale metal film resistors have exceptionally low noise level. Average for standard resistance range is 0.10 μV per V over a decade of frequency, with low and intermediate resistance values typically below 0.05 μV per V. Revision: 16-Sep-16 2 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CMF (Military RN and RL) www.vishay.com Vishay Dale Vishay Dale CMF resistors have an operating temperature range of -65 °C to +175 °C. They must be derated according to the following curves: R120 E W O PD100 MIL-R-10509 MIL-R-10509 E Char. D Rating Char. C and E Rating T 80 A R F O 60 % 40 20 MIL-PRF-22684 0 50 70 90 110 130 150 170 DERATING AMBIENT TEMPERATURE °C DIMENSIONS in inches (millimeters) 1.50 ± 0.125 (1) A (38.10 ± 3.18) C D (Max.) B VISHAY DALE C A B D MODEL (MAX.) 0.150 ± 0.020 0.065 ± 0.015 0.244 0.016 ± 0.002 CMF50 (3.81 ± 0.51) (1.65 ± 0.38) (6.20) (0.41 ± 0.05) 0.240 ± 0.020 0.090 ± 0.008 0.290 0.025 ± 0.002 CMF55 (6.10 ± 0.51) (2.29 ± 0.20) (7.37) (0.64 ± 0.05) 0.344 ± 0.031 0.145 ± 0.015 0.425 0.025 ± 0.002 CMF60 (8.74 ± 0.79) (3.68 ± 0.38) (10.80) (0.64 ± 0.05) 0.562 ± 0.031 0.180 ± 0.015 0.687 0.025 ± 0.002 CMF65 (14.27 ± 0.79) (4.57 ± 0.38) (17.45) (0.64 ± 0.05) 0.562 ± 0.031 0.180 ± 0.015 0.687 0.032 ± 0.002 CMF70 (14.27 ± 0.79) (4.57 ± 0.38) (17.45) (0.81 ± 0.05) 0.240 ± 0.020 0.090 ± 0.008 0.290 0.025 ± 0.002 CMF07 (6.10 ± 0.51) (2.29 ± 0.20) (7.37) (0.64 ± 0.05) 0.375± 0.040 0.145 ± 0.015 0.425 0.032 ± 0.002 CMF20 (9.53 ± 1.02) (3.68 ± 0.38) (10.80) (0.81 ± 0.05) Note (1) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. MILITARY POWER RATING MILITARY QUALIFIED MIL-R-10509 MIL-PRF-22684 WATTAGE AT +70 °C AT +125 °C AT +70 °C (D) (C and E) 0.05 - RN50 - 0.10 - RN55 - 0.125 RN55 RN60 - 0.25 RN60 RN65 RL07 0.50 RN65 RN70 RL20 0.75 (1) RN70 - - Notes • Commercial equivalents of military styles are available with higher power ratings. Consult factory. (1) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D. Revision: 16-Sep-16 3 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CMF (Military RN and RL) www.vishay.com Vishay Dale T)120 CMF50 CMF55 EN CMF07 BI100 M CMF60 A CMF20 E 80 V CMF65, BO CMF70 A 60 C E (° 40 S RI T 20 A E H 0 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125 APPLIED POWER IN W THERMAL RESISTANCE MARKING (per MIL-PRF-10509) Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 % Value = Three significant figures and multiplier J = JAN (Joint Army - Navy) brand RN50: (3 lines) RN55, RN60, RN65, RN70 (4 lines) DALE Company logo J50D JAN, type, characteristic 0137J 4 digit date code and JAN brand 1211 Value RN55D Type and characteristic F137 Tolerance and 3 digit date code 1211F Value and Tolerance Note • RL series are color banded per MIL-PRF-22684. PERFROMANCE MIL-R-10509 REQUIREMENT MIL-PRF-22684 CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E MIL Temperature Coefficient +200 ppm/°C -500 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C Applicable Vishay Dale ± 100 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C Temperature Coefficient TEST MIL MIL MIL MIL max. max. max. max. Thermal Shock ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 1.00 % R Short Time Overload ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Low Temperature Operation ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Moisture Resistance ± 1.50 % R ± 0.50 % R ± 0.50 % R ± 1.50 % R Shock ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Vibration ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Load Life ± 1.00 % R ± 0.50 % R ± 0.50 % R ± 2.00 % R Dielectric Withstanding ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Voltage Effect of Solder ± 0.50 % R ± 0.10 % R ± 0.10 % R ± 0.50 % R Revision: 16-Sep-16 4 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: RN60C5110BRE6 RN60C5111BB14 RN60C5111FRE6 RN60C5112FRE6 RN60C52R3FRE6 RN60C5361FB14 RN60C5361FRE6 RN60C53R6FB14 RN60C5601DB14 RN60C5620FRE6 RN60C5621BB14 RN60C5622FRE6 RN60C5623BRE6 RN60C56R2BB14 RN60C5901FB14 RN60C6190BB14 RN60C6190BRE6 RN60C6262DB14 RN60C6340FRE6 RN60C6492FB14 RN60C6493BB14 RN60C64R9FRE6 RN60C6652DB14 RN60C6810FRE6 RN60C69R8FB14 RN60C7061DB14 RN60C7150FB14 RN60C7151DB14 RN60C7151FRE6 RN60C7152BB14 RN60C7152BRE6 RN60C7153FB14 RN60C7320BB14 RN60C7320BRE6 RN60C7320FRE6 RN60C7323FRE6 RN60C7501BRE6 RN60C7503FRE6 RN60C75R0FRE6 RN60C7872FB14 RN60C7872FRE6 RN60C7873FRE6 RN60C7961BB14 RN60C8041FB14 RN60C8062FRE6 RN60C80R6FRE6 RN60C8200DB14 RN60C8201DB14 RN60C8251BB14 RN60C8251DRE6 RN60C8251FRE6 RN60C8252FRE6 RN60C8253FB14 RN60C8451BB14 RN60C8451FRE6 RN60C8452BB14 RN60C8661BB14 RN60C8662DB14 RN60C86R6FB14 RN60C8871FRE6 RN60C9001BB14 RN60C9002BB14 RN60C9092DRE6 RN60C9093FRE6 RN60C90R9DB14 RN60C90R9FB14 RN60C90R9FRE6 RN60C9312BB14 RN60C9312DB14 RN60C9321BB14 RN60C9420DB14 RN60C9531FRE6 RN60C9532FB14 RN60C9532FRE6 RN60C9761FB14 RN60C9762DB14 RN60C98R8DB14 RN60D1053FRE6 RN60D1101FRE6 RN60D1131FRE6 RN60D1132FRE6 RN60D1152FRE6 RN60D1180FB14 RN60D1181FB14 RN60D1181FRE6 RN60D1213FRE6 RN60D1214FRE6 RN60D1240FRE6 RN60D1241FRE6 RN60D1250FB14 RN60D1251FB14 RN60D1272FRE6 RN60D1273FRE6 RN60D1300FB14 RN60D1300FRE6 RN60D1303FRE6 RN60D1331FRE6 RN60D1371FB14 RN60D1371FRE6 RN60D1430FB14